# command in dailing is not working in iOS 7 with Iphone 4S

When I check balance or load a card as *123*00000# the phone not process a request its dial a call. Kindly help me how can i solve this issue.

Type those characters on the phone keyboard, then press the green "Dial" button on the bottom of the keyboard.

Similar Messages

When i try to use Command c it dose not work at all with any program but Command x and v works ?

when i try to use Command c it dose not work at all with any program but Command x and v works ?
i don't know what to do and how to fix it and why it habend ??????!!!!!!!!!

Open the Speech pane of System Preferences and check whether either the listening key or the speech key has become set to that keystroke; if so, change the setting.
(63123)

Import Autosplit not work correct, especially with iPhone 4

Hi everyone,
I've tried searching for this topic, and the best thread I have found is; http://discussions.apple.com/thread.jspa?messageID=12338876&#12338876
This describes the problem I am having, but it doesn't seem to answer it.
I use Aperture 3.1.1 with both my Nikon D80 and my iPhone 4, and the autosplit error is occurring only on my iPhone 4 (which also has photos from my iPhone 3G on it too)
Basically, in spite of the EXIF data showing, for example 14/02/2010, it will split the photos into a project for 13/02/2010 and 14/02/2010.
All the photos are being taken in the same day, so there are no midnight crossover problems, and I have checked the timezone data on my phone, computer and checked they are matching in Aperture, it will still split them in such a way.
Has anyone else had this issue and know any way to fix it that isn't in the other thread?
Your help in this is preemptively appreciated!

Hello, Doctorfroma.
Thank you for visiting Apple Support Communities.
Here is an article I would recommend going through when experiencing this issue.
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/ts2756
Cheers,
Jason H.

Apps not working after crash (with iPhone 2.0)

I'm using a 1st generation iPhone with the iPhone 2.0 update. Today, my phone became unresponsive after trying to start the Brain Challenge app (updated to the latest version), even holding down the home key to force quit the app did nothing. I had to do a hard reset (holding down the home key and the sleep button), and after a longer than usual time to reboot, several of my apps no longer work.
I get a message saying "The application "xxx" cannot be opened" when trying to start the Facebook app, Apple's Texas Holdem, Brain Challenge, Bloomberg, Tap Tap Revenge etc. etc. (although some, such as Apple's Remote, do work).
I'm guessing I need to recover it from backups, but how can I do it such that I don't lose those apps I have paid for that I have bought since the last time I backed up?

anyone?

ICloud on my iPad does not work in iOS 8

Hi all,
I have a problem with iCloud after upgrade to iOS 8 on my iPad. I have updated from IOS 7 to 8 without turning on the iCloud Drive feature (because of the Mavericks on my Macbook Pro in that time).
Applications like “Pages”, “Numbers”, “MindNode Pro” or “Textastic” (and it seems that all applications using documents in iCloud) stopped working. For example MindNode Pro tells me that "iCloud is not configured on my device”.
I have tried turning off/on iCloud, resetting the device and the problem is still there - I am not able to access my iCloud documents on my iPad (the Mac OS X versions of the apps works fine). I have upgraded to Yosemite, so I have also turned on the iCloud drive hoping that it will solve the problem… it does not :-(
Maybe there is some problem with my account, because the Family sharing behaves strange (it created all the calendars, memos, photo streams, etc. twice), and there is a big issue with ENABLING the iCloud DRIVE - this process NEVER ENDS — When I turn the iCloud Drive “on” on my iPad the window with “Turning On iCloud Drive…”. Even after few hour of waiting, this window does not disappear. I can close the preferences app and continue to work with other apps, but the problem with documents in iCloud remains.I have tried hard-resetting my iPad, turning off/on my iPad, disconnect it from my apple id a login again, reinstalling the applications and nothing helps. I am currently running the latest iOS version.
Another strange thing (maybe related to this problem) is, that in Yosemite I cannot se all the folders in my iCloud drive, here is an example from my Finder:
Here from MindNode Pro (Mac OS X version) - notice that it is able to open its folder, which is not listed in the iCloud (see above):
This is what I can see through the icloud.com website (there are items which are not listed in the Mac OS X):
So, I think that my iCloud is probably in some inconsistent state...
I am not able to find any Apple support email - I have tried [email protected], but it does not work (email returned with message "this email address aren’t monitored”).
Zdenek

Here's a better version:
When I try to initiate or receive a call via Sony MDR-EX100iP headphones/mic (that worked perfectly with iOS 6 and iOS 7), on iPhone 4S running iOS 8, I hear crackling static and the person on the other end of the line can't hear me.
I suppose that because I can make a hands-free call using the Apple headphones/mic, Apple will tell me that there's not an issue. However, the Sony MDR-EX100iP headphones/mic worked much better for me than the Apple headphones/mic, so I'm in a bit of a quandry...
BTW - It's really lame that you can't delete or even edit a posting once you submit it...

IPhone 5 proximity sensor not working! (iOS 6.0.1)

iPhone 5 proximity sensor not working! (iOS 6.0.1)
When I call , the screen is not locked(

Remove any screen protectors and cases, does the problem continue?

Iphone 5 back camara not working after ios update

My Iphone 5 back camara is not working after ios 8.1 update this morning
Only getting some fuzzy image.
Camara was working before the update.
Resting the phone to factory setting restoring phone nothing seems to work
I think this will be my last Iphone as apple never respondse in any case

If you're expecting Apple to respond on this forum, you will have a long wait. This is a user-to-user technical support forum that is only hosted by Apple. This was made clear when you signed up. In any case, try the steps in this article to troubleshoot hardware issues (there is a camera section):
iPhone: Hardware troubleshooting

HT1947 Remote for ipad landscape orientation not working in ios 7

Remote for ipad landscape orientation not working in ios 7

See this thread: remote app rotation locked in portrait orientation after iOS 7 upgrade
It is a discussion only - no helpful hints. Appears to be a bug for sure.

IMessage is not working in IOS 7 , Any workaround

iMessage is not working in IOS 7 , Any workaround

Yap, sad but true...
The most annoying problem, besides iMessage, is the keyboard, it's horrible on my iPhone 4 in Safari. Some on some formulars the keyboard is so **** slow that I had to stop typing after 2nd word.
But I could fix the iMessage Problem, first turn off iMsg, then you have to backup your Phone on your PC/Mac in iTunes, turn off auto sync when done and pull the phone off. Then go to the Phone settings and reset everything, then choose "set up as new device".
When done go to settings and activate iMsg and wait for activation, it will work! After you're done plug the phone back to your PC/Mac and restore from the Backup you made before. Now go to phone settings again and check if iMsg is on, if not (as it was in my case), turn it on and activate again, it will work now!!!
Attention: Apps and Music have to be resynced or downloaded after this, they are NOT part of the Backup.
This was what Apple tech. support told me to do and it worked fine.
Greets

Itunes 11.1.5 will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message? How does one work around this?

Itunes 11.1.5 (MacBook Pro,OS 10.6.8) will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message? How does one work around this?

Just reboot your laptop... While its rebooting try to reboot your phone also by holding the home and power buttonn for 10-15 seconds...When your phone is turned off try to connect it to iTunes and it will recognize your phone in recovery mode.
If you have the .ipsw file for iOS 7.0.6 saved in your desktop then in itunes press shift and click on Restore.
Select the ipsw file and let it restore.
If you dont have it downloaded then simply click on restore.
I hope it works
Cheers !

My iMessage is not working, i have an iPhone 4s and just updated the software to iOS 5.1

My iMessage is not working, i have an iPhone 4s and just updated the software to iOS 5.1

I turned my phone off and on again and it works now.

Auto backlight does not work on 4S with iOS 7! With iOS 6.1.3 I had the same problem.Why?

Auto backlight does not work on 4S with iOS 7. I had the same problem with iOS 6.1.3! Why ?

rlwebb71 wrote:
... I have the latest generation iPod touch, not the 5, but the latest. So why can't Siri come out and play?
Siri is not a feature of that iPod... 4th Gen...
iOS 6 Which Software for Which iDevices...
http://support.apple.com/kb/HT5457

Ctrl-T command do not work in website with flash

Ctrl-T command do not work in website with flash
== URL of affected sites ==
http://

If the Flash object has focus then key presses are processed by that plugin.
In such cases you need to click outside that plugin (e.g. the menu bar if you can't click on the website) to make the keyboard work.

Soft KeyBoard is not working on ios 7 with Air sdk 3.8

Hi
In my app Soft KeyBoard is not working on ios 7 with Air sdk 3.8. Does any one know soluton for this ?

Hi,
There's no question that TextFields and TextAreas weren't working in our case, likely because we have a deep displaylist with a variety of object types. Presumably, AIR has changed how it looks through the displaylist for objects that need keyboard, and perhaps we have an object type somewhere in the hierarchy that AIR no longer recurses. It's definitely something that changed, though.
It's no picnic to put together a sample app, I can't afford that time when I have a solution. But the symptom was very clear, a textbox would open, and the cursor would just blink with no way of interacting with it.
I'm happy using StageText directly, because it's a more direct way to interact with the OS and gives more control.
It also solves a bug in AIR that I haven't reported yet, but is as follows. Rarely, when you move the container of a TextField of TextArea after it has been created, AIR will crash and freeze iOS devices. It doesn't happen on Android or desktop, but with a user-base of about 100,000 of our app, we've had it reported maybe 50 times. One of our dialogs sometimes needs to reposition the elements, which is done animated. During this, AIR will crash about 0.01% of the time. We tried only creating the TextArea, but not activating it or even having it visible, but even an invisible TextArea will crash, presumably because AIR moves the internal StageText overlay around as well, and this confuses iOS after a while during the animation.
By using StageText directly, I finally also have a way to get rid of this bug, because I simply don't activate StageText until the object has already been positioned. Prior to that, it isn't even an editable text field, it's a label like anything else. So I'm happy I did this solution.
Let's just leave this thread as a record if someone else has the same problem. I'm quite sure it's because of our very complicated display list, and AIR having changed how it scans the displaylist for objects that need keyboard.
Best,
Per

Command F [find] function not working in Word 2011

It seems that my Command F function is not working properly...when I look for a term that I KNOW is in my document, sometimes it won't locate it. Sometimes it will only locate one instance of the word [in the sidebar] when the word actually appears multiple times in the document. And, if the word appears in my footnotes, the command F function will then only highlight the instances in which that word appears in the footnotes, but not in the main text [again, in the sidebar]. I've also noticed that the spotlight function does this as well [ie, I will use spotlight to search for word documents containing a certain term, and although I KNOW the term is in a certain document, spotlight will not identify that document as containing my search term].
These documents are a mix of ones that I created using Word 2011 and previous versions - the problem happens consistenly across all word files. And I'm not specifying any particular case for the terms (ie, I'm not searching for "Coffee" with a capital "C" and not getting any results because only "coffee" appears in my document).
I'm running Word 2011 on Lion OS. Please help - this is driving me insane.....

Sorry, this is the Office forum for Windows platform. Office for Mac related questions should really be posed in the following forums:
http://answers.microsoft.com/en-us/mac
Thanks for your understanding.
Tony Chen
TechNet Community Support

# command in dailing is not working in iOS 7 with Iphone 4S

Similar Messages

Maybe you are looking for