Command in script
hi experts,
in script, in text editor,
when we are writing some text, n if space is not sufficient, we take continuous text or extended line, so that that will be displayed continuosly in output.
in case when we r writing a command we take /: , here if line is not sufficient, it need to be written in second line, then what should be taken to continue the command.
i tried with continuous text and extended line, but it is displaying the second line as a text only. i mean its not cnsidering as a command.
plz some one help me to solve this problem.
thanks in advance.
Hi ,
1.At the end of the Command line Press shift+F8.
2.Then you can write the conditions.It automatically goes to next line ,if it is not sufficient.
Regards,
Shiva Kumar
Similar Messages
-
Different parameters for different sheets- Command Line Script
Hi,
I am using command line script to run my discoverer report.
I have 5 sheets in the workbook out of which, 2 has a PeriodID parameter, and the other 3 sheets does not have parameters.
Is it possible to execute this scenario.
This is the script i use:
string8 = "C:\oracle\BIToolsHome_1\bin\dis51usr.exe /connect uname/pwd@instance /apps_gwyuid APPLSYSPUB/PUB /apps_fndnam APPS /apps_user /apps_responsibility Resp_Name /opendb workbook /sheet sheet1 /sheet sheet2 /sheet sheet3 /parameter PeriodID 2008004 /sheet sheet4 /parameter PeriodID 2008004 /sheet sheet5 /export XLS file_name /batch"
Your inputs are highly appreciated.
Thanks.Hi
No, you cannot do this. You have to supply the parameters to each worksheet separately, even though different worksheets may use the same parameter(s).
Best wishes
Michael -
Command Line Scripts in File Adapter
Hi,
In the file adapter, does the command line script support "PERL" Scripts.
thanks.
KrishnanYES It will support.
For clarification check below one.
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi
FTP channel - not processing files, coz one of the files is wrong, -
Best command for script backup?
hello,
i always use robocopy for file backup , but with powershell and the new technologies is still the easiest and best choice?Your initial question was "Best command for script backup?". For this you received an answer. If you now need support on the subject of your script then you should start a new thread. Note also that you must test your robocopy command from a
command line before trying to embed it in a PowerShell script. -
Using Address..End Address Command in Script ?
Using Address........End Address Command in Script , Is it possible to print without Name filed ? I have tried but w/o name field it is not printing ..
I liket to print like this
Address paragraph Z3
Street ...........................
PoBox.........................
City........................
End Address
can any1 suggest me?Hi,
If you want to print country specific then use
/: ADDRESS PARAGRAPH AS
/: ADDRESSNUMBER &EKKO-ADRNR(K)&
/: FROMCOUNTRY &T001-LAND1&
/: ENDADDRESS
Reward if useful.
Regards,
Nageswar -
hi experts,
anybody knows how to use summing command in script.
pl explain with an example.
Thanks!
Edited by: Ranganayahi Chandirasekaran on Mar 6, 2008 12:58 PMHi Chandirasekaran,
Try the following link,
Link: [http://help.sap.com/saphelp_47x200/helpdata/en/d2/cb3d07455611d189710000e8322d00/frameset.htm]
Reward if helpful. -
About control commands in scripts
hi abapers
can u plz tell about control commands in scripts uses of control commandsHi,
Control Command Purpose:
The purpose of these is to allow control of the output formatting. These commands are not interpreted by the SAPscript editor, but are passed through to the SAPscript Composer for processing. The Composer is the program that converts text from the form displayed in the editor to the form used for printing. This includes, for example, line and page formatting, the replacement of symbols with their current values and the formatting of text according to the paragraph and character formats specified.
The SAPscript control commands are described in the following sections.
<b>Syntax of Control Commands</b>
Explicit Page Break: NEW-PAGE
Preventing Page Breaks: PROTECT
Next Main Window: NEW-WINDOW
Assigning a Value to a Text Symbol: DEFINE
Formatting Date Fields: SET DATE MASK
Formatting Time Fields: SET TIME MASK
Country-Dependent Formatting: SET COUNTRY
Position of the Leading Sign: SET SIGN
Initializing Numbered Paragraphs: RESET
Including Other Texts: INCLUDE
Changing the Style: STYLE
Formatting Addresses: ADDRESS
Setting a Header Text in the Main Window: TOP
Setting a Footer Text in the Main Window: BOTTOM
Conditional Text: IF
Finding a Match: CASE
Calling ABAP Subroutines: PERFORM
Inserting Print Controls: PRINT-CONTROL
Boxes, Lines, Shading: BOX, POSITION, SIZE
Hexadecimal Data: HEX, ENDHEX
Summing a Program Symbol: SUMMING
Br,
Laxmi -
Close_Form('XXE_F501_SCRIPTING_START'); this is a command in IESCLPKG.PLL WHEN I AM USING THIS COMMAND MY SCRIPTING WINDOW IS GETTING CLOSED BUT THEN ONE ERROR IS COMMING ,KINDLY GIVE ME IDEA TO DEBUG THAT ERROR
if (param_value = 'CLOSE_SCRIPTING_WINDOW') then
--go_block('VIEW_IB');
-- SET_WINDOW_PROPERTY('SCRIPTING_WINDOW', WINDOW_STATE, MINIMIZE);
--Set_Window_Property('SCRIPTING_WINDOW', VISIBLE, PROPERTY_OFF);
--hide_window('SCRIPTING_WINDOW');
-- GO_BLOCK('CTRL');
fnd_message.set_string('1');--nimish
fnd_message.show;--nimish
--Close_Form('XXE_F501_SCRIPTING_START'); -- Commented for Nova
fnd_message.set_string('2');--nimish
fnd_message.show;--nimish
Scripting_Util.EndScript;
end if;
THIS IS THE PLL CODE KINDLY GIVE ME A CLEAR SOLUTION.First: you should get a new keyboard. Seems your shift-key is stuck.
Second: A header of a post is a header and not for a summary of your question
Third: This is the forum for the tool SQL Developer. Please mark this question as answered and post again in Forms
Forth: When you expect an answer, the least would be to include the errormessage and your forms version.
Regards
Marcus -
Command or script to identify and delete the bitlocker partition
I am looking for some command or script to identify the bitlocker partition and delete it. Please let me know if anybody has any suggestions.
Hi,
I just want to know why you want to delete the BitLocker partition? If you mean the system reserved partition, it is not recommended to do like this, this partition contains not only the BitLocker component, but also the boot files. Deleting it would lead
into system startup failure.
Alex Zhao
TechNet Community Support -
[solved]Command line script to equalise volume levels of all mp3 files
Hello guys,
I have a bunch of mp3 files within a folder. Unfortunately they have unequal volume levels. Some of them are far too low, others too loud.
Is there a simple command line script to equalise all of them?
Regards
Robert
Last edited by orschiro (2012-12-30 17:44:59)I remember I found such a script a long time ago. I suppose it still works, here it is http://codepad.org/MLu1iscD. Please tell me if it works for you. By the way, it depends on mp3gain and python2-eyed3.
ps: As far as I can see, this script doesn't change the mp3 files itself, but stores the new volume in the id3 tag. This means, that you won't corrupt your files in any way, but the player needs to be able to get the volume information and adjust it. The script measures both the album and the track gain. Which one is used can be configured in the player.
Last edited by Army (2012-12-30 16:39:27) -
Linux command/shell script to find Memory consumed by JVM in EBS,SOA
Hi All,
Could anyone please let me know the following:
a)Linux command/shell script to find Memory consumed by JVM for every 1 minute frequency interval in EBS R12, SOA suite
b)Percentage of the Heap memory usage by the JVM for every 1 minute frequency interval in EBS R12, SOA suite
Thanks for your time!
Regards,user10088255 wrote:
Hi All,
Could anyone please let me know the following:
a)Linux command/shell script to find Memory consumed by JVM for every 1 minute frequency interval in EBS R12, SOA suite
b)Percentage of the Heap memory usage by the JVM for every 1 minute frequency interval in EBS R12, SOA suite
Thanks for your time!
Regards,Please see these docs.
JVM: Guidelines to setup the Java Virtual Machine in Apps Ebusiness Suite 11i and R12 [ID 362851.1]
Generate JVM heap dump in E-Business suite 11i and R12 [ID 462550.1]
11i: How To Use Jconsole to Monitor JVM with Oracle E-Business Suite 11i [ID 415455.1]
Configuring various JVM tuning parameters for Oracle E-Business suite 11i and R12 [ID 567551.1]
Script to find Apache, Java, Jinitiator, Forms version and JVM details for Oracle E-Business Suite 11i [ID 466890.1]
JVM Memory Monitoring, Tuning, Garbage Collection, Out of Memory, and Heap Dump Analysis For SOA Suite Integration 11g [ID 1358719.1]
How to Perform Memory and Thread Analysis on SOA [ID 1450293.1]
Thanks,
Hussein -
Any good Power Shell command or script to see connected users in real time for Lync 2013
Are there any good Power Shell commands or scripts that can tell you how many users are connected to a pool in real time so you can evaluate the current load. I have 3 FE servers in a single pool. We just started deploying the lync client to the users and
were curious as to how many are actually connected. I saw a number of home made scripts but really didn't care for any of them. I just want to find out how many users that are actually connected to the pool at a particular moment so we can see how many users
are really using the product.Have you looked at Pat Richard's get-csconnections script?: http://www.ehloworld.com/269
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013. -
Problem with shell commands and scripts from an Applescript Application
Hi-
I am fairly new to OSX software development. I am trying to build an application that creates a reverse SSH tunnel to my computer and starts OSXvnc. The idea is that my Mom or anyone else who needs help can connect to me without having to tinker with their firewalls.
There are plenty of resources on how to do this, and I have found them. What I have a problem with is the following.
I am building this application in Xcode as an Applescript application, because Applescript and shell scripting are the only forms of programming I know. I use an expect script to connect through SSH, and a "do shell script" for the raw OSXvnc-server application to allow screen sharing.
The problem is that when I click on the button to launch OSXvnc-server or the button to launch SSH, the application freezes until the process it spawns is killed or finishes. For example, I can set SSH to timeout after 60 seconds of no connection, and then the Applescript application responds again. I even tried using the ssh -f command to fork the process, but that doesn't seem to help.
I am also using "try" around each of the items.
What am I doing wrong? How can I make the buttons in my app launch SSH and OSXvnc-server without hanging the application while it waits for them to finish?
Thanks so much!See here for an explanation of the syntax.
(20960) -
OS Command batch script issue (FTP)
All,
I am running into a problem (i think it's simple) which I just can't seem to figure out. I have a FTP command which is in a batch script and I can run it manually (Its run in an old enviroment with Informatica) and the ftp script works just fine. When I use the OS Command to launch the bat file, it accesses the bat file but in the ftp log all I see it doing is copying the local directory into the first line of the log and then just copying the rest of the ftp script. It does nothing else!!
Does anyone have any ideas? I have copied the script and forced it into one bat file, tried running it from a local directory, running it from the server, combining everything into a single source for lcd and script, I am running out of ideas!!
- Another point is that I have to use this process as I am moving files from a server to a mainframe environment and need the ascii translate function in FTP.
Thanks,
AbhiUpdate:
After some searching (and soul searching;) ) I was able to find a way to call the FTP file through an shell batch. So for instance I have a shell script that calls the FTP script. This seems to work but now the log does not create correctly (the ftp script is creating the log) it seems to copy the script from the ftp file and paste it in the log file. -
Can i use alter command in script
type1=`sqlplus -s scott/tiger@home <<EOF1
spool file1.sql
alter table $v_tabname add(col1 number(10));
but select * from $v_tabname; is working in side the unix script
spool off;
EOF1`
alter table $v_tabname add(col1 number(10)); command is not working
in my unix script
please give your suggestionsThis appears to be a *NIX script. If so, the dollar sign is used to display the contents of the variable. In your case, that would be $v_tabname. Have you defined that variable in your script? If so, does the table actually exist in the scott schema?
Other than that, can you define "not working".
John
Maybe you are looking for
-
How to reference v$database in a package
How do you reference the view v$database in a package? CREATE OR REPLACE package body temp as dbname varchar2(10); procedure temp_proc is begin select name into dbname from v$database; end; end; Says table or view does not exist when I try to compile
-
Create spreadsheet file with a fixed number of rows
What is the most straight forward way to create a series of spreadsheet files each with a new file name and fixed number of rows. We have a data acquisition process that creates a new 1D array every 2 seconds. We'd like to build a series of spreads
-
Hello everyone, I'm having trouble adding code to the transaction CJ20N by user-exit or badi. What i want do is, when editing and trying to add a new material, i want to check first if field RESBD-LGORT is filled. If not, send error message that fiel
-
My airport status bar shows exclamatory sign
My mac book pro, when I start internet it does not work. My airport status bar shows exlamatory sign. Massage appears that sf assigned IP address and can not connect to internet
-
Why selected columns not show all in result output?
in the analysis, i select 4 columns but only 3 show up, why?