Command INCLUDE in Sapscript

Hi all,
I am having problem when use the command INCLUDE with extension PARAGRAPH.
When use in environment DEV the standard text is written using the definitions of paragraphs it informed in the command.
I carried to PRD and the standard text is not using the definitions of paragraphs it informed. it seems to be using the definitions of it I paragraph default.
Somebody can help me?
Luciano
sorry my english

Hi
Are u sure that paragraph exists in the version of the style is being used in PRD.
Max

Similar Messages

Include in Sapscript

Hi all,
I am working with zebra label printing in sapscript. In the text editor of the main window all code I have is :
/E ETIKETT
/:   PROTECT
/:   INCLUDE &THEAD-TDNAME& OBJECT &THEAD-TDOBJECT& ID &THEAD-TDID& LANGUAGE >
/:   ENDPROTECT
This is declarrtion given in main program
CONSTANTS:
thead-tdname(70)   TYPE c VALUE 'Z_MM07_ETIKETT',
thead-tdobject(10) TYPE c VALUE 'Z_MM07ET',
thead-tdid(4)      TYPE c VALUE '9000'.
When I debug the form I see some text in the window.I know that Z_MM07_ETIKETT is the name given to a text. I want to know where the text is stored ? ANd how do I view that ? How it is retrieved during debugging process ?
Can anyone please explain me that ?
Regards,
Varun.

Hello,
I'm having the same problem. I'm printing some labels and I have exactly the same thing in a form
/E ETIKETT
/:   PROTECT
/:   INCLUDE &THEAD-TDNAME& OBJECT &THEAD-TDOBJECT& ID &THEAD-TDID& LANGUAGE &THEAD-TDSPRAS&
/:   ENDPROTECT
These are the values for the TDNAME TDOBJECT TDID and TDSPRAS, Z_RECEIPT_LABEL1, ZCMS_RL1, ZCMS, ES
I found this data in table STXH, but I cannot find the text through SO10, I also cannot find it trough SE78
In SO10, I get this message: Text ID ZCMS for text object TEXT does not exist
And If I try with a different TEXT ID (ST for example) I get the message that the text does not exist.
Was someone able to resolve this issue?
Please help!!!
Thanks you very much in advance for your help!
Regards!

Commands Allowed in SAPscript

Good Morning,
I know i can use Command IF...ENDIF in SAPscript. As far as i know SELECT...ENDSELECT and LOOP...ENDLOOP aren't allowed.
Is this correct?
Best Regards,
Pedro Gaspar

Hi Pedro Gaspar,
Yes, you are correct.
We can use IF ELSEIF ENDIF. we we want to use the selects and loops, then
we need to write a External perform with a program, in that Program we can write
these ones(It is same as normal program)
Regards
Sudheer

Include in SAPScript printing test

Hi Folks,
Is there any way that you can get the actual effect of an include to display during the printing test in SAPScript, I actually want to see the content of the standard text not the include statement itself when looking at the erinting test on screen.
cheers,
Ross Goodman

Well, thats the test mode and test mode sapscript does execute everything.
If you just want to see the text formatting and alignment you can just copy paste the content of that include text in window for TEST purpose.

Print some text before include in sapscript

Helllo Friends,
There is one standard include in sap script for example
INCLUDE &VBDKA-TDNAME& OBJECT VBBK ID 0001 PARAGRAPH HT
i want to print text before this like
'packsize ' INCLUDE &VBDKA-TDNAME& OBJECT VBBK ID 0001 PARAGRAPH HT
pls tell how is it possible
Regards,
Sunny

try like this by specifying character format..
<c1>'packsize '<c1> <c2>INCLUDE &VBDKA-TDNAME& OBJECT VBBK ID 0001 PARAGRAPH HT<c2>

Control command Address in sapscript

Hi experts ,
Can any one explain me how Address and Endaddress work .
I have the below script in window presently
ADDRESS PARAGRAPH Z1
       TITLE    &VBDKR-ANRED&
       NAME     &VBDKR-NAME1&, &VBDKR-NAME2&, &VBDKR-NAME3&, &VBDKR-NAME4&
       STREET   &VBDKR-STRAS&
       POBOX    &VBDKR-PFACH& CODE &VBDKR-PSTL2& CITY &VBDKR-PFORT&
       POSTCODE &VBDKR-PSTLZ&
       REGION   &VBDKR-REGIO&
       CITY     &VBDKR-ORT01&, &VBDKR-ORT02&
       COUNTRY &VBDKR-LAND1&
       FROMCOUNTRY &VBDKR-SLAND&
       ADDRESSNUMBER &VBDKR-ADRNR&
     ENDADDRESS
I would like to know the difference between the top and one below .
ADDRESS DELIVERY PARAGRAPH Z1
FROMCOUNTRY &VBDKR-SLAND&
ADDRESSNUMBER &VBDKR-ADRNR&
ENDADDRESS
Is there that we set the format For "delievey address" somewhere in system .
If so please can I have inputs for doing
Thanks
Vinay

Hi,
    If DELEVIRY is specified then the address should be formatted as a complete delivery address, using the street name and number rather than the P.O. Box.
    If DELIVERY is not specified and if a POBOX is specified, then the POBOX is used in an address instead of a STREET.
Example
/: ADDRESS
/: TITLE 'Firma'
/: NAME 'Schneider & Co', 'Finanzberatung'
/: STREET 'Kapitalgasse 33'
/: POBOX '12345' CODE '68499'
/: POSTCODE '68309'
/: CITY 'Mannheim'
/: COUNTRY 'DE'
/: FROMCOUNTRY 'DE'
/: ENDADDRESS
Without specifying DELIVERY output will be
Firma
Schneider & Co
Finanzberatung
Postfach 12345
68499 Mannheim
With specifying DELIVERY, then the street name and number will appear in the address in place of the    P. O. Box number.
Firma
Schneider & Co
Finanzberatung
Kapitalgasse 33
68309 Mannheim
Regards
Bala Krishna

What is use of INCLUDE in command line statement?

Pls. explain following line. How this works and what is expected output for this line.
/: INCLUDE &VBDKA-ZTERM& OBJECT TEXT ID SDTP PARAGRAPH L
Thanks
Harshada

hi Harshada,
INCLUDE: Include other texts
With the command INCLUDE, you can include the contents of another text into your text. The text to be included exists separately from yours and is only copied at the time of the output formatting.With the INCLUDE command, you always get the most current version of the required text, since this is only read and inserted during the output formatting.
Syntax:
/: INCLUDE name [OBJECT o] [ID i] [LANGUAGE l] [PARAGRAPH p] [NEW-PARAGRAPH np]
The name of the text to be inserted must be specified and can have up to a maximum of 70 characters. If the text name contains blanks, then you must put it in quotes as a literal. It can also be specified via a symbol. All further parameters of the INCLUDE command are optional. If they are missing, SAPscript uses default values for them which are based on the respective call environment.
Examples:
/: INCLUDE MYTEXT
The text MYTEXT is included in the language of the calling text.
/: INCLUDE MYTEXT LANGUAGE E PARAGRAPH A1
The text with the name MYTEXT and the language E is included, regardless of in which language the calling text is created. The paragraph format A1 is valid as the standard paragraph for this call.
Optional specifications:
LANGUAGE If a language is not specified, the language of the calling text or the layout set is set for the text to be included. If a language is specified, the text is always loaded in this language, regardless of the language of the calling text.
PARAGRAPH The text to be included is formatted with the style allocated to it. With this parameter, the standard paragraph of this style can be redefined for the current call. All * paragraphs of the inserted text are then formatted with the paragraph specified here.
NEW-PARAGRAPH The first line of the included text has this format flag, provided it is not a command or comment line. If the optional entry PARAGRAPH (see above) is empty, all * paragraphs of the included text are formatted with the paragraph np specified with
NEW-PARAGRAPH.
OBJECT To specify a text completely, you must make further specifications regarding the text object. There are different rules and restrictions for this which depend on the object type of the calling text: All texts can be included in a layout set. If no object is entered here, TEXT is used (standard texts).With a documentation text (object DOKU), you can only include documentation texts. This object is assumed even if no object is specified in this environment. Only hypertext or documentation text can be included into a hypertext (object DSYS). If the OBJECT specification is missing, DSYS is set as a default value.
Only standard text (object TEXT), documentation text or hypertext can be included in any other type of text. The default object is TEXT if nothing is entered.
ID The text ID, which allows further text types within an object, is a further part of the text key. If the ID is not entered, the default Include ID from table TTXID is used for the calling text. If the specification is not in this table, the text ID of the calling text is used.
The ID together with the object are now the basis of a further consistency check:
All text IDs are allowed for a layout set.
Only documentation texts with the text IDs TX (general texts), UO (authorization objects), and documentation texts which have the same text ID as the calling documentation text may be included in documentation texts.
All DSYS texts may be included in DSYS texts, regardless of their ID. Documentation texts to be inserted may only have IDs TX and UO.
Standard texts with all the allowed text IDs, DSYS texts with all IDs, and documentation texts with Ids TX and UO may be included in the other types of texts.
Regards,
Santosh
Message was edited by:
Santosh Kumar Patha

About include text in sapscript form printing

hi experts:
I am learning about form printing,the control command-include,for example:INCLUDE ZTEST OBJECT TEXT ID ST.
the question is:how to ceate the text?
thanks

Hi,
Standard text are used to include a Fixed Note or Rules or regulation document in SAPSCRIPT.
You can include this text any where in your SAPSCRIPT, just by using include text.
It is created in SO10 transaction, Where you can create the standard text. Object Name --> Starting with Z, Text ID --> ST, Language --> EN
Just enter the text you want to display inside the editor and save it.
Then go to sapscript editor --> in Menu Include --> Text --> Standard.
It wil get included.
Hope this may be useful..
Regards,
Prashant

Including standard text in SAPScript...

Hi,
I have created a standard text Z_NOTE in SO10. If I want to include in Sapscript form, how do I do it ?
Thanks.
Rajesh

use the include control command:
/: INCLUDE Z_NOTE LANGUAGE 'E'
Assuming that the text is created in English language, in case if it is in a different lnaguage, modify the above include command with respective language.

Importance of language in include command

Hi All,
wat is the importance of language in INCLUDE command? in sapscript
i mean wat happens if we ignore/omit language in INCLUDE command?
for example i have 3 item texts
z003 - FR
z007 - IT
z008 - BE
these languages may be changed by the user to any language as per his choice,,,,so we cannot pass hard-code values for lanague in INCLUDE statement..
Thanks
John

John,
Adding to the points mentioned by our frnds above, if you really want the form output to be displayed in different languages, its SE63 T-code which helps in translation.
You can create the standard texts in SO10 with teh same name but in different languages. In translation, in the appropriate version you can call the text in the desired language.
IT works as you require. Try it out and get back for any other issues.
Regards
Priya

Sapscript Control Commands

Dear All,
 in Sapscript Control Command there is one command
 INCLUDE .
 Pls explain it.

Hi Kapoor,
INCLUDE: To include the contents of another text into the current text, use the INCLUDE control command. SAPscript still treats the text to be included as a separate text. The text is copied over only at the point at which the output is formatted.
Thus the use of the INCLUDE command always ensures that the most current version of a text is included into the output, since the text is not read and inserted until the output is formatted.
Syntax:
/: INCLUDE name [OBJECT o] [ID i] [LANGUAGE l] [PARAGRAPH p]
[NEW-PARAGRAPH np]

You must specify the name of the text to be inserted. It can be up to 70 characters long. If the name of the text contains spaces, then you must enclose it in quotes as a literal value. You can, alternatively, specify the name via a symbol. All remaining parameters in the INCLUDE command are optional. If an optional parameter is not specified, then SAPscript uses default values as applicable for the calling environment.
/: INCLUDE MYTEXT
The text MYTEXT is included in the language of the calling text.
/: INCLUDE MYTEXT LANGUAGE 'E' PARAGRAPH 'A1'
The text with the name MYTEXT and the language E is included, regardless of the language of the calling text. The paragraph format A1 will be used as the standard paragraph type for this call.
Optional parameters:
LANGUAGE
If this parameter is not specified, then the language of the calling text or the form language are used for the text to be included. If the language is specified, then the text will be fetched in this language, regardless of the language of the calling text.
PARAGRAPH
The text to be included is formatted using the style allocated. The PARAGRAPH parameter can be used to redefine the standard paragraph for this style for the current call. All *-paragraphs in the included text will then be formatted using the paragraph specified here.
NEW-PARAGRAPH
The first line of the text to be included will be given this format indicator, as long as it is not a comment or command line. If the optional PARAGRAPH parameter (see above) is not specified, then all *-paragraphs of the included text will also be formatted using the paragraph specified in the NEW-PARAGRAPH command.
OBJECT
In order to completely specify a text, information about the text object is also required. There are a number of restrictions and other rules that depend on the object type of the calling text:
 o Any kind of text can be included in a form. If no object is specified, then TEXT will be used (standard texts).
 o In the case of a document text (DOKU object), you can include only document texts. This object type is also assumed if no object is specified in this environment.
 o Only hypertexts and document texts can be included in a hypertext (DSYS object). If the OBJECT parameter is missing, then DSYS is used as the default value.
 o In the other kinds of text you can include only standard texts (TEXT object), document texts or hypertexts. If there is no specification, then the default object is TEXT.
ID
The text ID is a part of the text key, which permits further text objects within a given object. If no ID is specified, then the default include ID is used from the TTXID table for the calling text. If there is no entry in this table, then the text ID of the calling text is used.
The following consistency check is applied both to the ID and the object:
All text IDs are allowed in a form.
In document texts, only document texts may be included that have text IDs TX (general texts) or UO (authorization objects) and also other document texts with the same text ID as the calling document text.
In DSYS texts, all DSYS texts can be included, whatever ID they have. Document texts to be included must have one of the IDs TX or UO.
Into the other texts, standard texts with any allowable text ID, DSYS texts with all IDs, and document texts with the IDs TX and UO can be included.
The INCLUDE command returns a status code in the SAPSCRIPT-SUBRC symbol:
0: the text include was successful.
1: the command could not be executed because it contained syntax errors.
2: the rules governing the text to be included were not followed (see above).
This value cannot occur if the command is used in a SAPscript form.
4: the specified text could not be found.
Friendly Note: You have many open threads and Plz close the threads if they are answered/solved and reward points to the people who are helping you by taking their time.
Thanks,
Vinay

SapScript Command to Prevent a Form From Actually Printing

Hi everyone, we have a new requirement that says if a certain group of materials are ordered together within a certain range of quantity do not print the transfer order out on the printer. Our transfer order form is a Z sap-script form. Does anyone know if there is any command available in sapscript that I can insert into the sapscript code to activate when I do not want to print out this form???
Thanks for everyone's assistance in advance.

try to restrict by using if condition in the program .....while using open_form....
if <f1> ne <condition>
exit.
else.
call function open_form
endif.
reward IF......
Regards
Anbu

ADDRESS ENDADDRESS command in SAPScript

Hi Gurus,
How does address endaddress command works in SAPscript.
I want to use it in SAPscript as
ADDRESS
 ADDRESSNUMBER <LFA1-ADRNR>
 FROMCOUNTRY 'US'
ENDADDRESS.
I have gone through the documentation of ADDRESS_INTO_PRINTFORM but still not clear of the sequence.
Want to know, what will be the sequence in which address will be printed from above command and how does it determine this.
Appreciate your help.
Thanks,
Kartavya

Hi,
 Read Below documentation
 The ADDRESS - ENDADDRESS control command formats an address according to the postal convention of the recipient country defined in the COUNTRY parameter. The reference fields are described in the structures ADRS1, ADRS2, or ADRS3, depending on the type of address. Either direct values or symbols may be assigned to the parameters.
Syntax:
/: ADDRESS [DELIVERY] [TYPE t] [PARAGRAPH a] [PRIORITY p] [LINES l]
/: TITLE title
/: NAME name1[,name2[,name3[,name4]]]
/: PERSON name of natural person [TITLE form of address]
/: PERSONNUMBER number of the personen
/: DEPARTMENT department
/: STREET street name HOUSE house number
/: LOCATION additional location information
/: POBOX po box [CODE post code / zip code] [CITY city]
/: POSTCODE post code / zip_code
/: CITY city1[,city2]
/: NO_UPPERCASE_FOR_CITY
/: REGION county / state
/: COUNTRY recipient country [LANGUAGE language code]
/: COUNTRY_IN_REC_LANG
/: LANG_FOR_COUNTRY language key
/: FROMCOUNTRY sender country
/: ADDRESSNUMBER address number
/: ENDADDRESS
The parameter values contain both formatting and address information. The address data are formatted for output according to the data in the following parameters:
TYPE
FROMCOUNTRY
COUNTRY
LANGUAGE
PRIORITY
DELIVERY
LINES
If DELIVERY is not specified and if a POBOX is specified, then the POBOX is used in an address instead of a STREET.
Regards
Bala Krishna

Include statement in SAP Scripts

HI
1)Could you send syntax of logo in header window of layout.
2)We have 2 printers, while i give the print request Purchase order, one printer is working and coming logo along with details of the form, but other printer is working, then logo is not coming in header.Please give me details as early as possible.
Thank you
srini

Hi,
Command in your Sapscript
/: INCLUDE Z_YOUR_LOGO OBJECT TEXT ID 'ST' LANGUAGE 'E'
These are the steps to be followed for uploading graphics in R/3 system
1. First save the file as BMP
2. Open the BMP file in IMaging (Goto -> Programs -> Accessories -> Imaging) and
make it Zoom as 100% and save as *.TIFF
3. Open SE38 and execute program RSTXLDMC
4. Give your TIFF file path name
5. Select Bcol (for Color)
6. TEXT ID will be ZHEX-MACRO-*.
7. Inplace of * write your own logo name (ZCOMPANYLOGO)
8. Execute the program
9. Now Goto SE71 create your ZFORM
10. Create logo window
11. Goto text element of logo window
Thanks,
NN.

Inserting image in a sapscript.

Hi everyone,
   I have to change the existing signature in a sapscript to another signature.For that i have that signature as pdf with me.
I want to know how to load this to sap then to my sapscript .
Plz give the steps for
1. Changing that pdf to bmp file( tried changing the extension,but it didn't work)
2. Loading that to SAP
3. Inserting it into the Sapscript
It will be good if i can get it as fast as possible..
Thnaks
Nitin

hi,
How to Upload graphics (IMAGE) to your Sapscript?
Command in your Sapscript
/: INCLUDE Z_YOUR_LOGO OBJECT TEXT ID ST LANGUAGE E
These are the steps to be followed for uploading graphics in R/3 system
1.   First save the file as BMP
2.   Open the BMP file in IMaging (Goto -> Programs -> Accessories -> Imaging) and
      make it Zoom as 100% and save as *.TIFF
3.   Open SE38 and execute program RSTXLDMC
4.   Give your TIFF file path name
5.   Select Bcol (for Color)
6.   TEXT ID will be ZHEX-MACRO-*.
7.   Inplace of * write your own logo name (ZCOMPANYLOGO)
8.   Execute the program
9.   Now Goto SE71 create your ZFORM
10. Create logo window
11. Goto text element of logo window
or
In 4.6x :-
1. Goto SE71 Change the mode to GRAPHICAL
2. Choose the Graph Tabstrips
3. Now type in some name for the LOGO WINDOW
4. Press the IMPORT BUTTON (third button from left) and then IMPORT the BMP file from your DESKTOP
5. The code will be written automatically. You just need to drag and drop wherever you want
     the graphics to be.
/:   INCLUDE Z_COMPANY_LOGO OBJECT GRAPHICS ID BMON LANGUAGE EN
regards,
Sooness

Command INCLUDE in Sapscript

Similar Messages

Maybe you are looking for