Command line: Error: unable to open '/Applications/flex_sdk_4\frameworks\flex-config.xml'
Hi,
I am new to flex. I am trying to use the xmp sdk to create custom file info panels in photoshop.
I am going through the example show in the adobe documentation 'Building a panel with Flex SDK'
I got any running and I got all the files setup in the proper folders but I cannot for the life of me figure out why I keep getting this error.
Buildfile: /Volumes/three/2011/XMP/test project/build.xml
clean:
buildPanel:
[echo] --> Panel 'Test2'
[compc] Adobe Compc (Flex Component Compiler)
[compc] Version 4.5.1 build 21328
[compc] Copyright (c) 2004-2011 Adobe Systems, Inc. All rights reserved.
[compc] command line: Error: unable to open '/Applications/flex_sdk_4.5\frameworks\flex-config.xml'
[compc] Use 'compc -help' for information about using the command line.
BUILD FAILED
/Volumes/three/2011/XMP/test project/build.xml:20: compc task failed
Total time: 616 milliseconds
thanks,
digitalkyle
can you tell us where your services-config.xml file is
located. can you make sure it is right under the "src" folder of
the Flex Builder project.
Hope this helps.
Similar Messages
-
Oracle Application-iexplore error-Unable to open Application 11i.
Iam getting this error while opening oracle Applications 11i,
Please help to solve this,
iexplore.exe-Application error
The instruction at "0x04b0ed44"referenced memory at "0x00000054".
The memory could not be "read"
Click on OK to terminate the program
Click on Cancel to debug the program
Thanks-
SowmyaIam getting this error while opening oracle Applications 11i,What is the exact 11i release you are on?
Can you reproduce the issue from other machines?
Do you get the same error if you use a different browser?
iexplore.exe-Application error
The instruction at "0x04b0ed44"referenced memory at "0x00000054".
The memory could not be "read"
Click on OK to terminate the program
Click on Cancel to debug the program
Please check the Event Viewer for details about the error.
Thanks,
Hussein -
Revision: 2716
Author: [email protected]
Date: 2008-08-04 01:18:12 -0700 (Mon, 04 Aug 2008)
Log Message:
SDK-15848 - Conditional compilation constants defined in flex-config.xml are never used if a single constant is specified on the command line
* There's a possibility this will break a conditional complication test which disallows overwriting an existing definition -- I don't know if that will break the build, but the test should be removed either way.
* Using append syntax ("-define+=" on the command line or ant tasks, or append="true" in flex-config) and redefining a value works now if you use an already-defined namespace and name.
* So your flex-config may have -define=CONFIG::debug,false, and you may want -define+=CONFIG::debug,true from the commandline build, or FB build.
* Made the ASC ConfigVar fields final as a sanity check since overwriting is now allowed. It would be harder to track changes and subtle bugs if they were mutable. This means that you must build a new ConfigVar object if you need to make changes.
Bugs: SDK-15848
QA: Yes. Please read the updated javadocs in CompilerConfiguration. Tests need to be added to validate that overwriting is allowed, and happens correctly in different situations: I believe the order should be that flex-config is overwritten by a custom config (can we have more than one user config? is the order deterministic? I forget...), is overwritten by commandline or OEM. Did I miss any? (I didn't write code which changes this, it works however the existing configuration system allows overwriting and appending; if we have tests for that, maybe we don't need them duplicated for this feature.)
Doc: Yes. Please read the updated javadocs in CompilerConfiguration.
Reviewer: Pete
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-15848
http://bugs.adobe.com/jira/browse/SDK-15848
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/embedding/ConfigVar.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/common/CompilerConfiguration.java
flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/OEMConfiguration.javaPlease note: I AM USING:
JkOptions ForwardKeySize ForwardURICompat -ForwardDirectories
And that's what's supposed to fix this problem in the first place, right?? -
ERROR: Unable to open TUXCONFIG file
Hi,
I installed and installed the following software successfully on Windows XP
Oracle WebLogic Server 11gR1 (10.3.1) Microsoft Windows
PeopleSoft Enterprise PeopleTools 8.50
PeopleSoft Enterprise Human Resources Management System 9.1 - Revision 2
Tuxedo 10gR3 for MS Windows Server 2003 w/MS VS 2005 (32-bit x86, AMD64/EM64T x64) 32-bit
i am at the point of installing the Application Server. Domain created sucessfully but i got boot errors as shown below.
I searched for the TUXCONFIG file but could not find it in the tuxedo installation folder.
I read that i have to create the TUXCONFIG,if missing, using tmloadcf.exe and the ubbconfig file, but the only UBBCONFIG file is located in "\samples\atmi\rpcsimp\" folder.
How do i create the TUXCONFIG file?
Did i miss something with the installation? What location should this file exist after your tuxedo installation?
thanks
K
BOOT ERRORS:
PeopleSoft Domain Boot Menu
Domain Name: hrms
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 1
Attempting to boot bulletin board...
tmadmin - Copyright (c) 2007-2008 Oracle.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by Oracle.
Tuxedo is a registered trademark.
No bulletin board exists. Entering boot mode.
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents an
d Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:588: ERROR: Unable to open TUXCONFIG file
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:6272: ERROR: Unable to get bulletin board par
ameters
115818.SU1491!tmboot.2652.1488.-2: CMDTUX_CAT:825: ERROR: Process PSWATCHSRV at SU1491 failed w
ith /T tperrno (TPESYSTEM - internal system error)
115818.SU1491!tmboot.2652.1488.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; init
iating user error handler
115821.SU1491!BBL.2956.4352.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
115825.SU1491!PSADMIN.3088: End boot attempt on domain hrms
Edited by: user2932595 on Apr 17, 2010 1:17 PM
Edited by: user2932595 on Apr 17, 2010 1:21 PMHi
The TUXCONFIG file normally is created automatically when you create your domain.
In this case I think you ran into trouble because the path of installation is too long!
Note the error in your log:
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents and Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
Your path is 69 chars long!
I would suggest that you re-try the configuration with a shorter tuxedo and PS_HOME: perhaps in the root directory (c:\PSHOME)
In the past I've also noticed that installations have problems with paths that have spaces - ex: 'Documents and settings' , so I would avoid that as well.
Edited by: Alternate on Apr 19, 2010 2:00 AM -
[SOLVED] Rad 7790+Catalyst = Error: unable to open display (null)
Radeon HD 7790 + Catalyst = Error: unable to open display (null)
Greetings,
I've installed Arch 2 days ago(migrated from Fedora), but I'm still a newbie to linux, so please have patience.
I've bought AMD Radeon HD 7790 recently and decided that it's time to upgrade system, but since then I had only problems with it. No LiveCD I tried (Fedora 20, Mint) worked properly in graphics mode, so I suspected problem in built-in drivers and moved to linux with text-only installation (Arch), so I could install drivers later.
I've followed wiki manual and installed catalyst, removed open source driver, added nomodeset parametr to GRUB etc. but I'm still stucked, because Xorg won't start(black screen and errors presented in Logs). Tried googling, but learned nothing except Radeon proprietary drivers are comparable to suicide.
Versions:
Kernel: 3-10.40-1-lts (catalyst_build_module sucessful)
Catalyst: 14.4-10
Xorg: 1.14.5-11
Logs&Configs:
lsmod
fglrx 8672295 0
amd_iommu_v2 7174 1 fglrx
button 4765 1 fglrx
fglrxinfo
Error: unable to open display (null)
Xorg.0.conf
[ 2632.576]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 2632.594] X Protocol Version 11, Revision 0
[ 2632.600] Build Operating System: Linux 3.12.6-1-ARCH x86_64
[ 2632.606] Current Operating System: Linux localhost 3.10.40-1-lts #1 SMP Tue May 13 12:50:03 UTC 2014 x86_64
[ 2632.606] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=4f60e723-44e9-4264-8d6c-ca62c43cf69c rw quiet nomodeset
[ 2632.619] Build Date: 08 January 2014 01:35:51PM
[ 2632.629]
[ 2632.635] Current version of pixman: 0.32.4
[ 2632.646] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2632.646] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2632.671] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 25 00:53:45 2014
[ 2632.677] (==) Using config file: "/etc/X11/xorg.conf"
[ 2632.684] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2632.690] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2632.690] (==) ServerLayout "aticonfig Layout"
[ 2632.690] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 2632.690] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 2632.690] (**) | |-->Device "aticonfig-Device[0]-0"
[ 2632.690] (==) Automatically adding devices
[ 2632.690] (==) Automatically enabling devices
[ 2632.690] (==) Automatically adding GPU devices
[ 2632.690] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 2632.690] Entry deleted from font path.
[ 2632.690] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2632.690] Entry deleted from font path.
[ 2632.690] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2632.690] Entry deleted from font path.
[ 2632.690] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2632.690] Entry deleted from font path.
[ 2632.690] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2632.690] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2632.690] Entry deleted from font path.
[ 2632.690] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2632.690] (==) FontPath set to:
/usr/share/fonts/misc/
[ 2632.690] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2632.690] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2632.690] (II) Loader magic: 0x7fac20
[ 2632.690] (II) Module ABI versions:
[ 2632.690] X.Org ANSI C Emulation: 0.4
[ 2632.690] X.Org Video Driver: 14.1
[ 2632.690] X.Org XInput driver : 19.1
[ 2632.691] X.Org Server Extension : 7.0
[ 2632.692] (--) PCI:*(0:2:0:0) 1002:665c:1458:226a rev 0, Mem @ 0xc0000000/268435456, 0xde800000/8388608, 0xdffc0000/262144, I/O @ 0x0000e800/256, BIOS @ 0x????????/131072
[ 2632.698] Initializing built-in extension Generic Event Extension
[ 2632.704] Initializing built-in extension SHAPE
[ 2632.710] Initializing built-in extension MIT-SHM
[ 2632.717] Initializing built-in extension XInputExtension
[ 2632.723] Initializing built-in extension XTEST
[ 2632.728] Initializing built-in extension BIG-REQUESTS
[ 2632.734] Initializing built-in extension SYNC
[ 2632.740] Initializing built-in extension XKEYBOARD
[ 2632.745] Initializing built-in extension XC-MISC
[ 2632.751] Initializing built-in extension SECURITY
[ 2632.756] Initializing built-in extension XINERAMA
[ 2632.761] Initializing built-in extension XFIXES
[ 2632.767] Initializing built-in extension RENDER
[ 2632.772] Initializing built-in extension RANDR
[ 2632.777] Initializing built-in extension COMPOSITE
[ 2632.782] Initializing built-in extension DAMAGE
[ 2632.787] Initializing built-in extension MIT-SCREEN-SAVER
[ 2632.792] Initializing built-in extension DOUBLE-BUFFER
[ 2632.797] Initializing built-in extension RECORD
[ 2632.802] Initializing built-in extension DPMS
[ 2632.806] Initializing built-in extension X-Resource
[ 2632.811] Initializing built-in extension XVideo
[ 2632.816] Initializing built-in extension XVideo-MotionCompensation
[ 2632.821] Initializing built-in extension XFree86-VidModeExtension
[ 2632.825] Initializing built-in extension XFree86-DGA
[ 2632.830] Initializing built-in extension XFree86-DRI
[ 2632.834] Initializing built-in extension DRI2
[ 2632.834] (II) "glx" will be loaded by default.
[ 2632.834] (II) LoadModule: "glx"
[ 2632.834] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2632.835] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 2632.835] compiled for 6.9.0, module version = 1.0.0
[ 2632.839] Loading extension GLX
[ 2632.839] (II) LoadModule: "fglrx"
[ 2632.839] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 2632.863] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 2632.863] compiled for 1.4.99.906, module version = 14.10.2
[ 2632.863] Module class: X.Org Video Driver
[ 2632.863] (II) Loading sub module "fglrxdrm"
[ 2632.863] (II) LoadModule: "fglrxdrm"
[ 2632.863] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2632.863] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2632.863] compiled for 1.4.99.906, module version = 14.10.2
[ 2632.863] (II) AMD Proprietary Linux Driver Version Identifier:14.10.2
[ 2632.864] (II) AMD Proprietary Linux Driver Release Identifier: 14.10.1006
[ 2632.864] (II) AMD Proprietary Linux Driver Build Date: Apr 17 2014 21:15:33
[ 2632.864] (--) using VT number 2
[ 2632.885] (WW) Falling back to old probe method for fglrx
[ 2632.899] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 2632.901] ukiDynamicMajor: found major device number 250
[ 2632.901] ukiDynamicMajor: found major device number 250
[ 2632.901] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2632.901] ukiOpenDevice: node name is /dev/ati/card0
[ 2632.901] ukiOpenDevice: open result is 11, (OK)
[ 2632.901] ukiOpenByBusid: ukiOpenMinor returns 11
[ 2632.901] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2632.904] (--) Chipset Supported AMD Graphics Processor (0x665C) found
[ 2632.904] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
[ 2632.905] (II) fglrx(0): pEnt->device->identifier=0x11bea10
[ 2632.905] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[ 2632.905] (II) Loading sub module "vgahw"
[ 2632.905] (II) LoadModule: "vgahw"
[ 2632.905] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 2632.905] (II) Module vgahw: vendor="X.Org Foundation"
[ 2632.906] compiled for 1.14.5, module version = 0.1.0
[ 2632.906] ABI class: X.Org Video Driver, version 14.1
[ 2632.906] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 2632.906] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 2632.906] (==) fglrx(0): Default visual is TrueColor
[ 2632.906] (**) fglrx(0): Option "DPMS" "true"
[ 2632.906] (==) fglrx(0): RGB weight 888
[ 2632.906] (II) fglrx(0): Using 8 bits per RGB
[ 2632.906] (==) fglrx(0): Buffer Tiling is ON
[ 2632.906] (II) Loading sub module "fglrxdrm"
[ 2632.906] (II) LoadModule: "fglrxdrm"
[ 2632.906] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2632.906] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2632.906] compiled for 1.4.99.906, module version = 14.10.2
[ 2632.908] ukiDynamicMajor: found major device number 250
[ 2632.908] ukiDynamicMajor: found major device number 250
[ 2632.908] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2632.908] ukiOpenDevice: node name is /dev/ati/card0
[ 2632.908] ukiOpenDevice: open result is 13, (OK)
[ 2632.908] ukiOpenByBusid: ukiOpenMinor returns 13
[ 2632.908] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2632.908] (**) fglrx(0): NoAccel = NO
[ 2632.909] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 2632.909] (--) fglrx(0): Chipset: "AMD Radeon HD 7700 Series" (Chipset = 0x665c)
[ 2632.909] (--) fglrx(0): (PciSubVendor = 0x1458, PciSubDevice = 0x226a)
[ 2632.909] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 2632.909] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 2632.909] (--) fglrx(0): MMIO registers at 0xdffc0000
[ 2632.909] (--) fglrx(0): I/O port at 0x0000e800
[ 2632.909] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 2632.909] (II) fglrx(0): AC Adapter is used
[ 2632.914] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 2632.914] (II) Loading sub module "vbe"
[ 2632.914] (II) LoadModule: "vbe"
[ 2632.915] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 2632.915] (II) Module vbe: vendor="X.Org Foundation"
[ 2632.915] compiled for 1.14.5, module version = 1.1.0
[ 2632.915] ABI class: X.Org Video Driver, version 14.1
[ 2632.915] (II) fglrx(0): VESA BIOS detected
[ 2632.915] (II) fglrx(0): VESA VBE Version 3.0
[ 2632.915] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 2632.915] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 2632.915] (II) fglrx(0): VESA VBE OEM Software Rev: 15.32
[ 2632.915] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 2632.915] (II) fglrx(0): VESA VBE OEM Product: BONAIRE
[ 2632.915] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 2632.915] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 2632.915] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
[ 2632.915] (II) fglrx(0): PCIE card detected
[ 2632.915] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 2632.915] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 2632.915] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
[ 2632.915] (II) fglrx(0): RandR 1.2 support is enabled!
[ 2632.915] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 2632.915] (II) Loading sub module "fb"
[ 2632.915] (II) LoadModule: "fb"
[ 2632.916] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2632.916] (II) Module fb: vendor="X.Org Foundation"
[ 2632.916] compiled for 1.14.5, module version = 1.0.0
[ 2632.916] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2632.916] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 2632.916] (II) Loading sub module "ddc"
[ 2632.916] (II) LoadModule: "ddc"
[ 2632.916] (II) Module "ddc" already built-in
[ 2633.034] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 2633.034] (II) fglrx(0): Output DFP2 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP3 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP4 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP5 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP6 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP7 has no monitor section
[ 2633.034] (II) fglrx(0): Output CRT1 has no monitor section
[ 2633.034] (II) Loading sub module "ddc"
[ 2633.034] (II) LoadModule: "ddc"
[ 2633.034] (II) Module "ddc" already built-in
[ 2633.034] (II) fglrx(0): Connected Display0: CRT1
[ 2633.034] (II) fglrx(0): Display0 EDID data ---------------------------
[ 2633.034] (II) fglrx(0): Manufacturer: GSM Model: 4b31 Serial#: 78077
[ 2633.034] (II) fglrx(0): Year: 2007 Week: 7
[ 2633.034] (II) fglrx(0): EDID Version: 1.3
[ 2633.034] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 2633.034] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 2633.034] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 2633.034] (II) fglrx(0): Gamma: 2.20
[ 2633.034] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 2633.034] (II) fglrx(0): First detailed timing is preferred mode
[ 2633.034] (II) fglrx(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY: 0.615
[ 2633.034] (II) fglrx(0): blueX: 0.146 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
[ 2633.034] (II) fglrx(0): Supported established timings:
[ 2633.034] (II) fglrx(0): 720x400@70Hz
[ 2633.034] (II) fglrx(0): 640x480@60Hz
[ 2633.034] (II) fglrx(0): 640x480@67Hz
[ 2633.034] (II) fglrx(0): 640x480@72Hz
[ 2633.034] (II) fglrx(0): 640x480@75Hz
[ 2633.034] (II) fglrx(0): 800x600@56Hz
[ 2633.034] (II) fglrx(0): 800x600@60Hz
[ 2633.034] (II) fglrx(0): 800x600@72Hz
[ 2633.034] (II) fglrx(0): 800x600@75Hz
[ 2633.034] (II) fglrx(0): 832x624@75Hz
[ 2633.034] (II) fglrx(0): 1024x768@60Hz
[ 2633.034] (II) fglrx(0): 1024x768@70Hz
[ 2633.034] (II) fglrx(0): 1024x768@75Hz
[ 2633.035] (II) fglrx(0): 1280x1024@75Hz
[ 2633.035] (II) fglrx(0): 1152x864@75Hz
[ 2633.035] (II) fglrx(0): Manufacturer's mask: 0
[ 2633.035] (II) fglrx(0): Supported standard timings:
[ 2633.035] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 2633.035] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 2633.035] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 2633.035] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2633.035] (II) fglrx(0): Supported detailed timing:
[ 2633.035] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 2633.035] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 2633.035] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 2633.035] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 2633.035] (II) fglrx(0): Monitor name: L1918S
[ 2633.035] (II) fglrx(0): Monitor name:
[ 2633.035] (II) fglrx(0): EDID (in hex):
[ 2633.035] (II) fglrx(0): 00ffffffffffff001e6d314bfd300100
[ 2633.035] (II) fglrx(0): 071101036e261e78eaa2a5a3574c9d25
[ 2633.035] (II) fglrx(0): 115054bfef80314f454f614f81800101
[ 2633.035] (II) fglrx(0): 010101010101302a009851002a403070
[ 2633.035] (II) fglrx(0): 1300782d1100001e000000fd00384b1e
[ 2633.035] (II) fglrx(0): 530e000a202020202020000000fc004c
[ 2633.035] (II) fglrx(0): 31393138530a202020202020000000fc
[ 2633.035] (II) fglrx(0): 00200a202020202020202020202000e7
[ 2633.035] (II) fglrx(0): End of Display0 EDID data --------------------
[ 2633.035] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 2633.036] (II) fglrx(0): EDID for output DFP1
[ 2633.036] (II) fglrx(0): EDID for output DFP2
[ 2633.036] (II) fglrx(0): EDID for output DFP3
[ 2633.036] (II) fglrx(0): EDID for output DFP4
[ 2633.036] (II) fglrx(0): EDID for output DFP5
[ 2633.036] (II) fglrx(0): EDID for output DFP6
[ 2633.036] (II) fglrx(0): EDID for output DFP7
[ 2633.036] (II) fglrx(0): EDID for output CRT1
[ 2633.036] (II) fglrx(0): Manufacturer: GSM Model: 4b31 Serial#: 78077
[ 2633.036] (II) fglrx(0): Year: 2007 Week: 7
[ 2633.036] (II) fglrx(0): EDID Version: 1.3
[ 2633.036] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 2633.036] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 2633.036] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 2633.036] (II) fglrx(0): Gamma: 2.20
[ 2633.036] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 2633.036] (II) fglrx(0): First detailed timing is preferred mode
[ 2633.036] (II) fglrx(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY: 0.615
[ 2633.036] (II) fglrx(0): blueX: 0.146 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
[ 2633.036] (II) fglrx(0): Supported established timings:
[ 2633.036] (II) fglrx(0): 720x400@70Hz
[ 2633.036] (II) fglrx(0): 640x480@60Hz
[ 2633.036] (II) fglrx(0): 640x480@67Hz
[ 2633.036] (II) fglrx(0): 640x480@72Hz
[ 2633.036] (II) fglrx(0): 640x480@75Hz
[ 2633.036] (II) fglrx(0): 800x600@56Hz
[ 2633.036] (II) fglrx(0): 800x600@60Hz
[ 2633.036] (II) fglrx(0): 800x600@72Hz
[ 2633.036] (II) fglrx(0): 800x600@75Hz
[ 2633.036] (II) fglrx(0): 832x624@75Hz
[ 2633.037] (II) fglrx(0): 1024x768@60Hz
[ 2633.037] (II) fglrx(0): 1024x768@70Hz
[ 2633.037] (II) fglrx(0): 1024x768@75Hz
[ 2633.037] (II) fglrx(0): 1280x1024@75Hz
[ 2633.037] (II) fglrx(0): 1152x864@75Hz
[ 2633.037] (II) fglrx(0): Manufacturer's mask: 0
[ 2633.037] (II) fglrx(0): Supported standard timings:
[ 2633.037] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 2633.037] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 2633.037] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 2633.037] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2633.037] (II) fglrx(0): Supported detailed timing:
[ 2633.037] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 2633.037] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 2633.037] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 2633.037] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 2633.037] (II) fglrx(0): Monitor name: L1918S
[ 2633.037] (II) fglrx(0): Monitor name:
[ 2633.037] (II) fglrx(0): EDID (in hex):
[ 2633.037] (II) fglrx(0): 00ffffffffffff001e6d314bfd300100
[ 2633.037] (II) fglrx(0): 071101036e261e78eaa2a5a3574c9d25
[ 2633.037] (II) fglrx(0): 115054bfef80314f454f614f81800101
[ 2633.037] (II) fglrx(0): 010101010101302a009851002a403070
[ 2633.037] (II) fglrx(0): 1300782d1100001e000000fd00384b1e
[ 2633.037] (II) fglrx(0): 530e000a202020202020000000fc004c
[ 2633.037] (II) fglrx(0): 31393138530a202020202020000000fc
[ 2633.037] (II) fglrx(0): 00200a202020202020202020202000e7
[ 2633.037] (II) fglrx(0): Printing probed modes for output CRT1
[ 2633.037] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 2633.037] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x960"x75.0 135.00 1280 1296 1440 1688 960 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328 1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x768"x75.0 135.00 1280 1296 1440 1688 768 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1328 1440 1688 768 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x720"x75.0 135.00 1280 1296 1440 1688 720 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1328 1440 1688 720 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 2633.037] (II) fglrx(0): Output DFP1 disconnected
[ 2633.037] (II) fglrx(0): Output DFP2 disconnected
[ 2633.037] (II) fglrx(0): Output DFP3 disconnected
[ 2633.037] (II) fglrx(0): Output DFP4 disconnected
[ 2633.037] (II) fglrx(0): Output DFP5 disconnected
[ 2633.038] (II) fglrx(0): Output DFP6 disconnected
[ 2633.038] (II) fglrx(0): Output DFP7 disconnected
[ 2633.038] (II) fglrx(0): Output CRT1 connected
[ 2633.038] (II) fglrx(0): Using exact sizes for initial modes
[ 2633.038] (II) fglrx(0): Output CRT1 using initial mode 1280x1024
[ 2633.038] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2633.038] (II) fglrx(0): DPI set to (96, 96)
[ 2633.038] (II) fglrx(0): Eyefinity capable adapter detected.
[ 2633.038] (II) fglrx(0): Adapter AMD Radeon HD 7700 Series has 6 configurable heads and 1 displays connected.
[ 2633.038] (==) fglrx(0): PseudoColor visuals disabled
[ 2633.038] (II) Loading sub module "ramdac"
[ 2633.038] (II) LoadModule: "ramdac"
[ 2633.038] (II) Module "ramdac" already built-in
[ 2633.038] (==) fglrx(0): NoDRI = NO
[ 2633.038] (==) fglrx(0): Capabilities: 0x00000000
[ 2633.038] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 2633.038] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 2633.038] (==) fglrx(0): UseFastTLS=0
[ 2633.038] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 2633.038] (--) Depth 24 pixmap format is 32 bpp
[ 2633.038] Loading extension ATIFGLRXDRI
[ 2633.038] (II) fglrx(0): doing swlDriScreenInit
[ 2633.038] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 2633.039] ukiDynamicMajor: found major device number 250
[ 2633.039] ukiDynamicMajor: found major device number 250
[ 2633.039] ukiDynamicMajor: found major device number 250
[ 2633.039] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.039] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.039] ukiOpenDevice: open result is 14, (OK)
[ 2633.039] ukiOpenByBusid: ukiOpenMinor returns 14
[ 2633.039] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.039] (II) fglrx(0): [uki] DRM interface version 1.0
[ 2633.039] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
[ 2633.039] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x3c000
[ 2633.039] (II) fglrx(0): [uki] mapped SAREA 0x3c000 to 0x7f000fd0d000
[ 2633.039] (II) fglrx(0): [uki] framebuffer handle = 0x3d000
[ 2633.039] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 2633.039] (II) fglrx(0): swlDriScreenInit done
[ 2633.039] (II) fglrx(0): Kernel Module Version Information:
[ 2633.039] (II) fglrx(0): Name: fglrx
[ 2633.039] (II) fglrx(0): Version: 14.10.2
[ 2633.039] (II) fglrx(0): Date: Apr 17 2014
[ 2633.039] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 2633.039] (II) fglrx(0): Kernel Module version matches driver.
[ 2633.039] (II) fglrx(0): Kernel Module Build Time Information:
[ 2633.039] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.10.40-1-lts
[ 2633.039] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 2633.039] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 2633.039] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 2633.039] (II) fglrx(0): [uki] register handle = 0x0003e000
[ 2633.040] (II) fglrx(0): DRI initialization successfull
[ 2633.040] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01040000
[ 2633.041] (==) fglrx(0): Backing store disabled
[ 2633.041] Loading extension FGLRXEXTENSION
[ 2633.041] (**) fglrx(0): DPMS enabled
[ 2633.041] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 2633.041] (**) fglrx(0): Textured Video is enabled.
[ 2633.041] (II) LoadModule: "glesx"
[ 2633.042] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 2633.043] (II) Module glesx: vendor="X.Org Foundation"
[ 2633.043] compiled for 1.4.99.906, module version = 1.0.0
[ 2633.043] Loading extension GLESX
[ 2633.043] (II) fglrx(0): GLESX enableFlags = 8784
[ 2633.043] (II) fglrx(0): GLESX is enabled
[ 2633.043] (II) LoadModule: "amdxmm"
[ 2633.043] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 2633.043] (II) Module amdxmm: vendor="X.Org Foundation"
[ 2633.043] compiled for 1.4.99.906, module version = 2.0.0
[ 2633.055] Loading extension AMDXVOPL
[ 2633.055] Loading extension AMDXVBA
[ 2633.055] (II) fglrx(0): Enable composite support successfully
[ 2633.055] (WW) fglrx(0): Option "VendorName" is not used
[ 2633.055] (WW) fglrx(0): Option "ModelName" is not used
[ 2633.055] (II) fglrx(0): X context handle = 0x1
[ 2633.055] (II) fglrx(0): [DRI] installation complete
[ 2633.055] (==) fglrx(0): Silken mouse enabled
[ 2633.056] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 2633.056] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2633.414] (--) RandR disabled
[ 2633.432] ukiDynamicMajor: found major device number 250
[ 2633.432] ukiDynamicMajor: found major device number 250
[ 2633.432] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.432] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.432] ukiOpenDevice: open result is 15, (OK)
[ 2633.432] ukiOpenByBusid: ukiOpenMinor returns 15
[ 2633.432] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.432] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 2633.443] ukiDynamicMajor: found major device number 250
[ 2633.443] ukiDynamicMajor: found major device number 250
[ 2633.443] ukiDynamicMajor: found major device number 250
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.443] ukiOpenDevice: open result is 16, (OK)
[ 2633.443] ukiGetBusid returned 'PCI:2:0:0'
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card1
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: Open failed
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card2
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: Open failed
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card3
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card4
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card5
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card6
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card7
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card8
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card9
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card10
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card11
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card12
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card13
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: Open failed
[ 2633.446] ukiOpenDevice: node name is /dev/ati/card14
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: Open failed
[ 2633.446] ukiOpenDevice: node name is /dev/ati/card15
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: Open failed
[ 2633.446] ukiDynamicMajor: found major device number 250
[ 2633.446] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.446] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.446] ukiOpenDevice: open result is 16, (OK)
[ 2633.446] ukiOpenByBusid: ukiOpenMinor returns 16
[ 2633.446] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.525] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 2633.526] ukiDynamicMajor: found major device number 250
[ 2633.526] ukiDynamicMajor: found major device number 250
[ 2633.526] ukiDynamicMajor: found major device number 250
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.526] ukiOpenDevice: open result is 17, (OK)
[ 2633.526] ukiGetBusid returned 'PCI:2:0:0'
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card1
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card2
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card3
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card4
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card5
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card6
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card7
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card8
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card9
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card10
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card11
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card12
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card13
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card14
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card15
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiDynamicMajor: found major device number 250
[ 2633.527] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.527] ukiOpenDevice: open result is 17, (OK)
[ 2633.527] ukiOpenByBusid: ukiOpenMinor returns 17
[ 2633.527] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.546] (II) fglrx(0): OverDrive6 Detected!
[ 2633.551] (II) fglrx(0): Setting screen physical size to 338 x 270
[ 2633.594] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 2633.594] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2633.594] (II) LoadModule: "evdev"
[ 2633.595] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2633.595] (II) Module evdev: vendor="X.Org Foundation"
[ 2633.595] compiled for 1.14.3, module version = 2.8.2
[ 2633.595] Module class: X.Org XInput Driver
[ 2633.595] ABI class: X.Org XInput driver, version 19.1
[ 2633.595] (II) Using input driver 'evdev' for 'Power Button'
[ 2633.595] (**) Power Button: always reports core events
[ 2633.595] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 2633.595] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2633.595] (--) evdev: Power Button: Found keys
[ 2633.595] (II) evdev: Power Button: Configuring as keyboard
[ 2633.595] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 2633.595] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2633.595] (**) Option "xkb_rules" "evdev"
[ 2633.595] (**) Option "xkb_model" "pc104"
[ 2633.595] (**) Option "xkb_layout" "us"
[ 2633.634] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2633.634] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2633.634] (II) Using input driver 'evdev' for 'Power Button'
[ 2633.634] (**) Power Button: always reports core events
[ 2633.634] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2633.634] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2633.634] (--) evdev: Power Button: Found keys
[ 2633.634] (II) evdev: Power Button: Configuring as keyboard
[ 2633.634] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 2633.634] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2633.634] (**) Option "xkb_rules" "evdev"
[ 2633.634] (**) Option "xkb_model" "pc104"
[ 2633.634] (**) Option "xkb_layout" "us"
[ 2633.635] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 2633.635] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc051
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2633.635] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input1/event1"
[ 2633.635] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
[ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 2633.635] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 2633.635] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.636] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 2633.636] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.636] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event6)
[ 2633.636] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.636] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event7)
[ 2633.636] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.637] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event8)
[ 2633.637] (II) No input driver specified, ignoring this device.
[ 2633.637] (II) This device may have been added with another device file.
[ 2633.637] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=10 (/dev/input/event10)
[ 2633.637] (II) No input driver specified, ignoring this device.
[ 2633.637] (II) This device may have been added with another device file.
[ 2633.637] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=9 (/dev/input/event11)
[ 2633.637] (II) No input driver specified, ignoring this device.
[ 2633.637] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event12)
[ 2633.638] (II) No input driver specified, ignoring this device.
[ 2633.638] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event13)
[ 2633.638] (II) No input driver specified, ignoring this device.
[ 2633.638] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event14)
[ 2633.638] (II) No input driver specified, ignoring this device.
[ 2633.638] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=11 (/dev/input/event9)
[ 2633.639] (II) No input driver specified, ignoring this device.
[ 2633.639] (II) This device may have been added with another device file.
[ 2633.639] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2633.639] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2633.639] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2633.639] (**) AT Translated Set 2 keyboard: always reports core events
[ 2633.639] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2633.639] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2633.639] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2633.639] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2633.639] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2633.639] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 2633.639] (**) Option "xkb_rules" "evdev"
[ 2633.639] (**) Option "xkb_model" "pc104"
[ 2633.639] (**) Option "xkb_layout" "us"
[ 2633.640] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 2633.640] (II) No input driver specified, ignoring this device.
[ 2633.640] (II) This device may have been added with another device file.
[ 2635.885] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 2639.300] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2639.300] (II) fglrx(0): Backup framebuffer data.
[ 2639.333] (II) fglrx(0): Backup complete.
[ 2653.729] (II) evdev: AT Translated Set 2 keyboard: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.730] (II) evdev: Logitech USB-PS/2 Optical Mouse: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.730] (II) evdev: Power Button: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.730] (II) evdev: Power Button: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.732] (II) fglrx(0): Shutdown CMMQS
[ 2653.735] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[ 2653.735] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x3c000 at 0x7f000fd0d000
[ 2653.735] (EE)
[ 2653.740] (EE) Backtrace:
[ 2653.745] (EE) 0: Xorg (xorg_backtrace+0x3d) [0x57e04d]
[ 2653.750] (EE) 1: Xorg (0x400000+0x181da9) [0x581da9]
[ 2653.754] (EE) 2: /usr/lib/libpthread.so.0 (0x7f000f1e8000+0xf4b0) [0x7f000f1f74b0]
[ 2653.759] (EE) 3: /usr/lib/libpciaccess.so.0 (0x7f000f406000+0x503e) [0x7f000f40b03e]
[ 2653.765] (EE) 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_x_inb+0x46) [0x7f000bb46126]
[ 2653.771] (EE) 5: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0x9e2e05) [0x7f000bb3ee05]
[ 2653.776] (EE) 6: /usr/lib/xorg/modules/drivers/fglrx_drv.so (X86EMU_exec+0xa5) [0x7f000bb32555]
[ 2653.782] (EE) 7: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_xf86ExecX86int10+0x46) [0x7f000bb47286]
[ 2653.788] (EE) 8: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xf86ExecX86int10+0xd) [0x7f000b56897d]
[ 2653.793] (EE) 9: /usr/lib/xorg/modules/libvbe.so (VBESetVBEMode+0x9d) [0x7f000ab0163d]
[ 2653.799] (EE) 10: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0x441623) [0x7f000b59d623]
[ 2653.805] (EE) 11: /usr/lib/xorg/modules/drivers/fglrx_drv.so (atiddxVBESetConsoleMode+0x44) [0x7f000b59d474]
[ 2653.811] (EE) 12: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxFreeScreen+0x73e) [0x7f000b6ffc1e]
[ 2653.817] (EE) 13: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxCloseScreen+0x321) [0x7f000b6ff241]
[ 2653.823] (EE) 14: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0xa4a846) [0x7f000bba6846]
[ 2653.828] (EE) 15: Xorg (0x400000+0xc3136) [0x4c3136]
[ 2653.833] (EE) 16: Xorg (0x400000+0x106964) [0x506964]
[ 2653.838] (EE) 17: Xorg (0x400000+0x24cd7) [0x424cd7]
[ 2653.843] (EE) 18: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f000e058000]
[ 2653.848] (EE) 19: Xorg (0x400000+0x24f0f) [0x424f0f]
[ 2653.857] (EE)
[ 2653.861] (EE) Segmentation fault at address 0x0
[ 2653.866] (EE)
Fatal server error:
[ 2653.874] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 2653.878] (EE)
[ 2653.883] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2653.899] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2653.904] (EE)
[ 2653.908] (EE) Server terminated with error (1). Closing log file.
xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
I'm sure that the main problem is between keyboard and chair, but I'd like to know, what's wrong with pc
Thanks for your efforts.
Last edited by Mytrin (2014-05-25 19:09:02)I've managed to solve this error:
(EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory
There was missing library and few directories, which I found according to this http://www.reddit.com/r/archlinux/comme … _correctly at /usr/lib/dri, so I had to just symlink it. However, "unable to open display" error is still annoying me and Xorg is not working.
EDIT: Found EE about missing commands in new Xorg.0.log and installed xterm to solve this. Now I don't have entirely black screen after startx. There is white rectangular terminal and fglrxinfo seems to be all right as it detected my Radeon and OpenGL. Now I have to install some DE, but that's another story. Marking as [SOLVED] and once again thanks to clfarron4 for reply.
Last edited by Mytrin (2014-05-25 19:06:09) -
Flex Compiler API Issue: Error: unable to open './flex-config.xml'
1) I make a java struts(or a servlet) to build swf file
dynamically when receiving the request from client. The struts
source code please see the attached code. deploy the structs to the
Tomcat
2) then copy the <Flex_SDK>/frameworks to the
<tomcat_home>/webapps/dozhang/WEB-INF
3) then copy the all the libraries under the
<Flex_SDK>/lib to the
<tomcat_home>/webapps/dozhang/WEB-INF/lib
4) Copy a test a.mxml to c:\
5) Start up Tomcat , access the structs, I will get the
Error: unable to open './flex-config.xml' in the tomcat log.
Can anyone tell me how to specify the location of the
flex-config.xml ?Ok, I solved it by myself
I need to add the following codes when calling the Compiler
API
Configuration conf = application.getDefaultConfiguration();
conf.setToken("flexlib", "path to the frameworks")
applicaiton.setConfiguration(conf);
Then it solved the problem -
ERROR: Unable to open structapps file!
Hello,
Having modified the structapps.fm in FM10, I am getting the following error within a dialog when attempting to use the same file in FM8:
ERROR: Unable to open structapps file! FA_errno -43
Is FM not backward compatible ? OR do I need to reread the file in FM8
ThanksThe file should be saved in the FM version that you're using it in. You can't use any newer FM version file in any older version of FM, e.g. FM8 can't open any FM10 files (except for the MIF formats).
-
Hi there,
As you see in the heading, I am getting the error "Unable to open file because it isn't a valid Keynote document". There has been a number of threads on this and there seems to be a usual work around that works in many cases, by changing the file extension to .zip and then looking for the index file and making some more extension changes...unfortunately, in my case (and it also happened to others), there is no index file, so the usually suggested solution doesn't work...Can someone please help? I am working on a tight deadline and would like to try and recover the file.
Thanks a lot in advance.
Best,
Just a regular apple user
PS: any other presentation opens fine in Keynote (09)Have you tried to create a new Keynote Presentation? Do you have another previously saved Keynote file you can try to open? These will make sure it is a problem with this specific presentation and not the whole program.
Try to delete the Keynote Preferences. They are located in the folder Macintosh HD>Users>your username>Library>Preferences and titled com.apple.iWork.Keynote.plist.
Your profile shows that you are still on Mc OS 10.6.6, is that true? You might try to update to 10.6.7 as I believe that there was a font issue fixed in this update (I don't know for sure since I am still on 10.5.8).
Try those and report back and we will see what we can come up with. -
E63 Adobe LE error 'unable to open file"
Hi!
I've bought an E63 six months ago and recently I've purchased a memory card.
After a few days I wasn't anymore able to open any pdf, either from the phone's memory, or the memory card.
I receive this error: "unable to open file!"
If I try to open the Adobe PDF executable file nothing happens.
Any suggestions?Hi,
Ensure that file name with same name and in same path should not be open while saving the data.
Award if it helps.
Jogdand M B -
Hi Experts, ipad error- unable to downlaod application
Hi Experts,
In ipad i am trying to install sap business one ipad application using ITunes from app store but getting error
Unable to download application "SAP Business One" could not be downloaded at this time.
Thanks
Rajkumar Guptaactually there are 2 problems here:
file:///Documents and Settings/... will work, but this means the path:
/Documents and Settings/... on the current path.
if you have to include the "c:" part first, then there needs to be only 2 leading slashes, because "/C:/Documents and Settings/..." is not a leagle pathname (even after replacing the file separators).
However the colon (":") char is not legal in a URL, so has to be escaped.
Best to just use: "file:///Documents and Settings/..."
/Andy -
Unable to open application | e6 photo editor
I have formatted my phonr (e6).
After that I am unable open Photo editor. It says "unable to open application".
Also unable to see photo edit option in the gallery.
Please help me.
MirzaHi Ziyaul Islam,
Thanks for your post and welcome to the Nokia forum.
In order to fix this issue, I would advise you to perform a hard reset. First of all, back up your data using Nokia Suite (Tools > Back up). Once your data is fully backed up, type *#7370# on the keypad. Default lock code is 12345.
The hard reset will dellete all your personal information, that's why a back up is very important.
Alternatively, you may also check for updates on Nokia Suite (by going to Tools > Updates).
If the problem persists, I would suggest you to contact your local Nokia care.
Hope this helps and feel free to post any other questions you may have.
Regards,
Pfrancoise
If this post has helped you to solve this issue, please press the "accept as solution" icon. Kudos would always be appreciated. -
I am unable to open applications folder
All of a sudden I am unable to open applications folder and when I try it tells me I do not have sufficient access privileges. Any ideas anyone??
Hi,
Are you logged in with an admin account? If the answer is no, log into the admin account go into the system preferences under the 'Sharing' section you will need to change the File sharing options.
Alternatively if you are logged in as an admin try restarting your computer and see if the issue still persists.
Hope this helps. -
BUILD FAILED java.lang.Error: unable to load schema-for-schema for W3C XML
I am new to JAXB, I am trying to run the sample applciations on Win 98,
I have set up the environment values as per the UserGuide specs.
I am getting the following error:
BUILD FAILED java.lang.Error: unable to load schema-for-schema for W3C XML Schema at com.sun.msv.reader.xmlschema.XMLSchemaReader.getXmlSchemaForXmlSchema (XMLSchemaReader.java:190)
Could someone please suggest a solution.
Thank you.Hi
I am using Windows 2000 and I am repeatedly getting the same error too (See below). Would appreciate any help ..
parsing a schema...
org.iso_relax.verifier.VerifierConfigurationException
at com.sun.msv.verifier.jarv.FactoryImpl.compileSchema(FactoryImpl.java:104)
at org.iso_relax.verifier.VerifierFactory.compileSchema(Unknown Source)
at org.iso_relax.verifier.VerifierFactory.compileSchema(Unknown Source)
at com.sun.msv.reader.xmlschema.XMLSchemaReader.getXmlSchemaForXmlSchema(XMLSchemaReader.java:186)
at com.sun.tools.xjc.Driver$1.<init>(Driver.java:477)
at com.sun.tools.xjc.Driver.loadXMLSchemaGrammar(Driver.java:476)
at com.sun.tools.xjc.Driver.loadGrammar(Driver.java:404)
at com.sun.tools.xjc.Driver.run(Driver.java:268)
at com.sun.tools.xjc.Driver.main(Driver.java:88)
at sample1.Binder.main(Binder.java:18)
StackTrace of Original Exception:
java.lang.NullPointerException
at com.sun.msv.datatype.xsd.TypeIncubator.addFacet(TypeIncubator.java:64)
at com.sun.msv.reader.datatype.xsd.XSDatatypeExp$1.addFacet(XSDatatypeExp.java:87)
at com.sun.msv.reader.datatype.xsd.FacetState.startSelf(FacetState.java:56)
at com.sun.msv.reader.State.init(State.java:154)
at com.sun.msv.reader.GrammarReader.pushState(GrammarReader.java:579)
at com.sun.msv.reader.datatype.xsd.TypeState.startElement(TypeState.java:101)
at org.xml.sax.helpers.XMLFilterImpl.startElement(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.startElement(AbstractSAXParser.java:459)
at org.apache.xerces.parsers.AbstractXMLDocumentParser.emptyElement(AbstractXMLDocumentParser.java:221)
at org.apache.xerces.impl.XMLNamespaceBinder.handleStartElement(XMLNamespaceBinder.java:874)
at org.apache.xerces.impl.XMLNamespaceBinder.emptyElement(XMLNamespaceBinder.java:591)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartElement(XMLDocumentFragmentScannerImpl.java:747)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(XMLDocumentFragmentScannerImpl.java:1477)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:329)
at org.apache.xerces.parsers.DTDConfiguration.parse(DTDConfiguration.java:525)
at org.apache.xerces.parsers.DTDConfiguration.parse(DTDConfiguration.java:581)
at org.apache.xerces.parsers.XMLParser.parse(XMLParser.java:152)
at org.apache.xerces.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1175)
at com.sun.msv.reader.GrammarReader._parse(GrammarReader.java:459)
at com.sun.msv.reader.GrammarReader.switchSource(GrammarReader.java:434)
at com.sun.msv.reader.GrammarReader.switchSource(GrammarReader.java:407)
at com.sun.msv.reader.xmlschema.XMLSchemaReader.switchSource(XMLSchemaReader.java:683)
at com.sun.msv.reader.xmlschema.ImportState.startSelf(ImportState.java:41)
at com.sun.msv.reader.State.init(State.java:154)
at com.sun.msv.reader.GrammarReader.pushState(GrammarReader.java:579)
at com.sun.msv.reader.SimpleState.startElement(SimpleState.java:72)
at org.xml.sax.helpers.XMLFilterImpl.startElement(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.startElement(AbstractSAXParser.java:459)
at org.apache.xerces.impl.XMLNamespaceBinder.handleStartElement(XMLNamespaceBinder.java:877)
at org.apache.xerces.impl.XMLNamespaceBinder.startElement(XMLNamespaceBinder.java:569)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartElement(XMLDocumentFragmentScannerImpl.java:759)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(XMLDocumentFragmentScannerImpl.java:1477)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:329)
at org.apache.xerces.parsers.DTDConfiguration.parse(DTDConfiguration.java:525)
at org.apache.xerces.parsers.DTDConfiguration.parse(DTDConfiguration.java:581)
at org.apache.xerces.parsers.XMLParser.parse(XMLParser.java:152)
at org.apache.xerces.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1175)
at com.sun.msv.reader.GrammarReader._parse(GrammarReader.java:459)
at com.sun.msv.reader.GrammarReader.parse(GrammarReader.java:449)
at com.sun.msv.reader.xmlschema.XMLSchemaReader.parse(XMLSchemaReader.java:89)
at com.sun.msv.verifier.jarv.XSFactoryImpl.parse(XSFactoryImpl.java:26)
at com.sun.msv.verifier.jarv.FactoryImpl.compileSchema(FactoryImpl.java:95)
at org.iso_relax.verifier.VerifierFactory.compileSchema(Unknown Source)
at org.iso_relax.verifier.VerifierFactory.compileSchema(Unknown Source)
at com.sun.msv.reader.xmlschema.XMLSchemaReader.getXmlSchemaForXmlSchema(XMLSchemaReader.java:186)
at com.sun.tools.xjc.Driver$1.<init>(Driver.java:477)
at com.sun.tools.xjc.Driver.loadXMLSchemaGrammar(Driver.java:476)
at com.sun.tools.xjc.Driver.loadGrammar(Driver.java:404)
at com.sun.tools.xjc.Driver.run(Driver.java:268)
at com.sun.tools.xjc.Driver.main(Driver.java:88)
at sample1.Binder.main(Binder.java:18)
java.lang.Error: unable to load schema-for-schema for W3C XML Schema
at com.sun.msv.reader.xmlschema.XMLSchemaReader.getXmlSchemaForXmlSchema(XMLSchemaReader.java:190)
at com.sun.tools.xjc.Driver$1.<init>(Driver.java:477)
at com.sun.tools.xjc.Driver.loadXMLSchemaGrammar(Driver.java:476)
at com.sun.tools.xjc.Driver.loadGrammar(Driver.java:404)
at com.sun.tools.xjc.Driver.run(Driver.java:268)
at com.sun.tools.xjc.Driver.main(Driver.java:88)
at sample1.Binder.main(Binder.java:18)
Exception in thread "main"
-Thanks
Guna -
ColdFusion 8 as WAR on JBoss 4.2.3 WEB-INF/flex-config.xml error
I have done this by the book multiple times and have also tried using someone else's WAR to deploy, but I keep getting the same error. I am running JBoss 4.2.3 and have tried this on multiple installations (of 4.2.3)
I have verified that the supposed missing file file exists.
1.) 19:19:15,853 INFO [ContextLoader] Root WebApplicationContext: initialization completed in 54014 ms 19:19:18,172 ERROR [STDERR] javax.servlet.ServletException: The configuration file cound not be found at /WEB-INF/cfform/flex-config.xml 19:19:18,174 ERROR [STDERR] at flex.server.j2ee.cache.CacheFilter.setupFlexService(CacheFilter.java:93)
This error results in failure of the WAR to deploy:
--- MBeans waiting for other MBeans --- ObjectName: jboss.web.deployment:war=cfusion.war,id=611163449 State: FAILED Reason: org.jboss.deployment.DeploymentException: URL file:/jee/workspace/tools/server/default/deploy/cfusion.war/ deployment failed
Any ideas?Hi,
One more option is also avails plz clear cache / tmp and data folder for Admin server and try to restart it again.
This should solve.
Regards,
Kal -
Prerequisiteinstaller.exe error - unable to install Application Server Role, Web Server (IIS) Role
Windows Server 2012 R2 running on Hyper-V VM. File services, App server & IIS roles installed
SQL Server 2012 installed
Tried:
kb 2765260 method 1 which is kb 2771431 which ends with "not applicable to computer"
kb 2765260 method 2 with no effect (this was power shell commands for PC's connected to the internet)
One post suggested "aspnet_regii - enable -i" but my OS doesn't have aspnet_regii on it (not sure what that implies)
One post suggested ServerManagerCmd.exe needed to be installed which sounds true as shown below (but where do I find this exe?)
There are some errors in the log file, I only included the portions where the errors are listed. The initial lines are at the top of the log file, then I skipped to the section where the other errors were. I can include the whole log if
it becomes necessary.
9:47:11 Processor architecture is (9)
9:47:11 Reading the following string value/name...
9:47:11 Common Startup
9:47:11 from the following registry location...
9:47:11 SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
9:47:11 The value is...
9:47:11 C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
9:47:11 Trying to remove the startup task if there is any.
9:47:11 C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
9:47:11 Error: Startup task doesn't exist. This is not a continuation after a restart.
9:47:11 Locating the following command line arguments file:
9:47:11 E:\PrerequisiteInstaller.Arguments.txt
9:47:11 Error: This file does not exist
9:47:11 Details of the current operating system:
9:47:11 Check whether the following prerequisite is installed:
9:47:11 Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
9:47:11 Reading the following DWORD value/name...
9:47:11 IsInstalled
9:47:11 from the following registry location...
9:47:11 SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
9:47:17 Beginning download/installation
9:47:17 Created thread for installer
9:47:17 "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1\AppData\Local\Temp\1\PreE0DB.tmp.XML"
9:47:17 Error: Unable to install (2)
9:47:17 Error: [In HRESULT format] (-2147024894)
9:47:17 Last return code (2)
9:47:17 Reading the following DWORD value/name...
9:47:17 Flags
9:47:17 from the following registry location...
9:47:17 SOFTWARE\Microsoft\Updates\UpdateExeVolatile
9:47:17 Reading the following string value/name...
9:47:17 PendingFileRenameOperations
9:47:17 from the following registry location...
9:47:17 SYSTEM\CurrentControlSet\Control\Session Manager
9:47:17 Reading the following registry location...
9:47:17 SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
9:47:17 Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
9:47:17 Last return code (2)
9:47:17 Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any command line options.
9:47:17 Cannot retry
I'm presuming the first 2 errors are OK and just indicate optional startup modes for prerequisiteinstaller.exe
The 2nd set of errors seems more serious. I don't see ServerManagerCmd.exe on my PC that's listed in the error
I don't understand the last error which I'm supposing triggered the listed error even though there are other errors in the log.
Many of the existing posts don't match the configuration I'm using, and the ones that do match didn't seem to provide a usable answer. Any help is appreciated. Do these problems exist using Sever 2012 Standard? I will try that, but would
like to resolve the issue here with R2.
Thanks.
Best Regards,
AlanServerManagerCMD.exe is a deprecated utility and (as far as I know) is only found on Server 2008 versions, so I'm surprised it's needed for the preinstaller. Are you trying to install SharePoint 2010?
Running this page through Google Translate should give you an clearer idea on getting this installed.
http://blog.hand-net.com/sharepoint/2010-06-10-error-lors-de-linstallation-des-office-web-apps-2010-sur-windows-7.htm
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.
Maybe you are looking for
-
Problem accessing https Web service from behind proxy
Hi all, I have this constant timeout issue which occurs whenever I try to access the Web service from behind a proxy. Find below the error logs - AxisFault faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException faultSubcode: fault
-
Yesterday this was automatically installed. Today I can't access a document in Pages. A prompt says I need a Pages update. But the next screen tests for updates and informs me everything is up to date. What's up?
-
Hi, class hey static System.out.println("Hello World!"); Above code works fine. In the sence it do throw error, but it prints Hello World! as well. Why?? Amit
-
Link Between DIP Profile and RA Key
Hi All, As per Result Analysis calculation Method-15 "Revenue from Resource-Related Billing and Simulation of Dynamic Items", the "Cost of Sales" is calculated on the amount of actual cost incurred according to DIP Profile. Can anybody tell me How th
-
Hello I am trying to send mail to a group of 1000 from my Address Book (this is not spam), and keep getting the message that the mail can't be sent. I've tried using the two mail-servers I'm connected to (Comcast and SpamArrest) to no avail. In the p