Command line mode for SandBox

Hi,
Does it exist command line mode to set up SandBox?
Does anybody have this experience?
if yes, can you, please , share links or docs.
Thank you kindly.

With version 9i of EM a new command-line utility has been introduced called "OEMUTIL". From the "Oracle Enterprise Manager 101" book:
"The oemutil command is a utility that performs various job-related and event-related tasks. It provides a command-line alternative to performing the same functions from the EM Console for registering and deregistering events or jobs, and changing
database passwords stored in the repository.
The syntax for the oemutil command is:
oemapp oemutil <username>/<password>@<oms> <command> <parameters>
The parameters for the oemutil command are:
<username> This parameter specifies a valid EM administrator account. It is the same account used to log in to the EM console.
<password> The password for the EM administrator account.
<oms> The name of the machine running the OMS.
<command>< parameters> A command to be performed by oemutil with
corresponding parameters."
You can submit existing EM jobs or create new jobs "on the fly".
Regards
Lars Bo

Similar Messages

  • Is there a command line option for VNC to automatically launch in fullscreen mode?

    I can launch a VNC window from the command line, as such:
    open vnc://username:password@hostname
    ... but I'd like it to automatically start in full screen mode. Is there a command line option for this?
    I'm using an old MacMini purely to connect to another Mac over screen sharing, but when the MacMini boots I'd like it to go straight into the fullscreen of the other desktop.
    Many thanks!

    Set the Integer pref browser.sessionstore.max_resumed_crashes to 0 on the about:config page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
    * http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes
    That will allow you to deselect the tab(s) that you do not want to reopen, but will allow to reopen other tabs.
    See:
    * http://kb.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
    * http://kb.mozillazine.org/Browser.sessionstore.max_resumed_crashes

  • CANNOT_START-UP: Stars in Command-Line-Mode: "Deallocation of a pointer not

    HELLO EVERYONE, PLEASE CAN YOU HELP ME...
    My computer: Mac OS X (10.3.9) had froze, couldn't force quit..and i forced started it by holding the power button. Restarted it, came on: the grey-screen and apple, spinning-gear...satayed like that long time then it went into Command-Line_Mode.
    Darvin,
    UserName:
    Password:
    I enterded UserName and Password, but could not start in normal ways.
    Now when I start-up the computer, Command-Line opens with only:
    :/root#
    and a curser-point.
    I have been reading all the leads that I found in the discussions, tryed most of the suggestions: fsck (/sbin/fsck -fy), Safe-Mode (didn't start in), couldn't start up from CD.
    COMMAND-LINE (at one time it said like this):
    *God boot device= IOService:/MacRISCZPE?pci@f2000000/AppleMacRiscPCI/*
    *mac-io@17/AppleKeyLargo/ata-4@1f000/KeylargoATA/ATADeviceNum@0/IOATABlockStorag eDrive/IOATABlockStorageDevice/IOBlockStorageDriver/ST340810A.Media/IOAppleParti tionScheme/MacOS@5 BSD root: diskOs5, Major 14, minor 5*
    *Feb 22 14:32:25 mach_init[2]:Started with uid=0 audit-uid=-1*
    *Feb 22 14:32:25 init:ignoring exwss arguments/etc/rc.boot:cannot dublicate*
    *fd-1048577 to fd 1: Bad file descriptor*
    **malloc[3]: Dealocation of a pointer not malloced: 0x710; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug*
    *at an other time after using fsck*
    Command-Line-Interface:
    *:root#/sbin/fsck -fy*
    **/dev/rdiskOsF
    *Root file System*
    *Checking HFS Plus volume.*
    *Checking Extents Overflow file.*
    *Checking Catalog file.*
    *Keys out of order*
    *(4, 8874)*
    *Rebuilding Catalog B-tree.*
    *The Valume Macintosh could not be repaired.*
    PLEASE HELP!
    WHAT Should i do?
    If nothing works, could i start-up from OS 9.2.2? (Both Systems OSX and OS_9.2.2 were installed)
    If the B-tree is corrupt, does it being shared by both OSX and OS_9.2.2?
    THANK YOU

    Hi Kappy,
    Thank you for taking an interest.
    I already tryed to start_up from CD, but it either didn't started-up
    or it started still in Command-Line-Mode.
    Put the CD in the tray, startedUP with the C_Key Held.
    It took a little longer and seemed it was going to start from CD but went into CommanLine again.
    but instead of
    :/root#
    it said something else, something like:
    2e_sh.. (Something! i could redo it and write it down here if it will help)
    Other times i tryed to bootUP from CD by holding-down the Option-Key and saw the install-CD icon next to
    OSX-Icon, so i chose the CD and hit the Straight-ARROW-Icon to start up from the CD, but again it fell
    into CommandLine.
    If i try the Target-Disk-Mode with a healty-Mac, could i be able to see my HD. Then i can switch to
    OS_9.2.2 which i spose is healty because i was using OS_10.3 when this problem happened. And the way
    i think, if the B-tree Catalog is not being shared by both Systems, if each have its own one, then the
    OSX's B-tree Catalog have been corrupted, not OS9's, and so if i could change the start-up-system(Disk)
    somehow, i could be able to start the computer with OS_9.2.2 running. Both systems were installed,
    and i was switching back and forth between them. Then i can fix my computer by, at least, starting
    to throw away some of the junk and so making some free-space.
    I had read that HD should not be full more than 85%. I had 2.5GB space left out of 40GB.
    But if there is a risk that things like this could happen because your HD is too full;
    why arn't they (Apple) fix this, buy, at least, showing as if you HD is full before it gets
    too full to leave a safety net for the B-tree Catalog files evidently that need to be written
    in continuous blocks on the HD.
    So thank you again, and keep me posted if you might think something else could fix my computer. I need
    this computer.
    thanks

  • Latest DNG converter not working in command-line mode

    Today I downloaded Adobe's latest DNG converter. It is failing with both .NEF and .CR2 files when run in command-line mode. It does appear to work in GUI mode. The switches+arguments I've used for my tests are:
    -u -e -p1 filename.CR2
    (or filename.NEF)
    With an older (CS2) version of the converter, the above arguments produce a .DNG output file as expected (with .CR2 files; I didn't try it with D3 .NEF files; surely that older version doesn't support the D3's format).
    With the very latest version, running the program with the above command produces no output. There's no error message.
    The 'readme' file that comes with the converter doesn't include any information about command-line usage, but I did find a PDF file covering this (adobe.com/products/dng/pdfs/dng_commandline.pdf). The switches+arguments shown in the PDF file appear to be exactly the ones I used in the past.
    I'm sure I'll need to use the most recent version to convert D3 RAW files. Is there something wrong with how I'm specifying its command-line switches/arguments?

    It struck me silly that I've been running tests with v.3.3 when 5.2 is the latest, so I downloaded it. The setup "wizard"...hmm, why is it a "wizard"? It provides no choice of installation path. I didn't realize this because immediately after I'd launched it, I knocked something onto the floor, reached down to pick it up ... and looked back up just in time to see the "wizard" complete the installation...but where, I didn't know. It didn't display any information about where it had installed the app. Adventures In Discoverability. :) I hunted around on the hard drive until I found it (C:\Program Files\Adobe -- well, at least you can launch it if you think to look for it in the 'Start' menu). So ... that needs a bit of work. Anyway, I copied the app into a directory of my choice -- one that's in my system's %PATH%, replacing spaces in the name with underscores. It works fine in that directory -- no problem with the name-change as far as I can tell. Now back to the fun stuff...
    This version doesn't seem to require a fully qualified path to the input file or to the output directory when "-d" is used. That's an improvement. IOW, this worked:
    converter -p1 -d DNG filename
    where "converter" is the program's name, "DNG" is the name of a subdirectory of the directory where I'm running the test, and "filename" is the name of a RAW file in that directory.
    The program still doesn't know how to create a directory (or ask about creating one if it doesn't exist). Fails silently if "-d" is used and the specified directory doesn't exist. But at least this version returns an exit code of 1 due to the failure -- better than returning 0.
    Still doesn't understand wildcards. Hope done sprang eternal there for a moment, but oh well. Back to "for" loops...
    Still fails silently, returning exit code 0 (oops), if a nonsensical command-line is used (e.g., using "-c" as the only argument).
    Hey, how about a truly silly command-line error -- a command line including both "-c" and "-u". What happens? It "consumes" the first of the two mutually exclusive switches, ignoring the second -- you get a compressed DNG file. Swap the order of the switches, and you get an uncompressed file. (I'd vote for a syntax-error message in that case, m'self.)
    Interestingly strange little program...If I run it from the command line, it drops back to the command line immediately after I press ENTER. That makes it appear to have failed. But it hasn't -- it's running in the background, and a few seconds later the DNG file is created. But, if I run it from within a batch file, it does NOT return control to me until it has completed writing the output file. Wonder what's up with that.
    Fun stuff. :)

  • RunInstaller in command line mode

    Hi All
    Can I runInstaller in command line mode without using the GUI?
    I download linux_11gR2_examples.zip and upload it onto my Amazon AMI
    I would like to iinstall the examples but I am not able to set xdisplay so how I can get around this?
    -Thanks for all your input

    Hi;
    Please see below doc
    http://download.oracle.com/docs/cd/E11882_01/install.112/e16763.pdf << Oracle Database Installation Methods
    By the way why you can not xdisplay? What is error?
    Please see:
    Re: 11gR2 Grid Infrastructure cannout launch installer OEL 5.5
    Regard
    Helios

  • Install UCM 11g in command line mode

    Hi there,
    I am installing oucm 11g on a linux system (suse 11). I would like to know if it is possible to run the installer in command line mode (without using any X11 window server).
    I have tried with this command
    ./runInstaller –jreLoc $JAVA_HOME
    but after some requirements check failed because it cannot connect to X11 window server.
    Thanks,
    al

    Though following installation procedure may not be supported but it worked for me.
    create Inventory Location
    mkdir /var/SP/weloadm/home/oraInventory
    Create an file oraInst.loc with contents in the
    software directory:
    inventory_loc=/var/SP/weloadm/home/oraInventory
    inst_group=welo
    ./runInstaller -jreLoc $JAVA_HOME -silent -
    invPtrLoc /var/SP/weloadm/home/software/oraInst.loc
    “ORACLE_HOME=/opt/SP/weloadm/Middleware/Oracle_ECM1
    ” “MIDDLEWARE_HOME=/opt/SP/weloadm/Middleware”
    Hope it helps

  • Command line stop for a single service

    Hi,
    How to stop a single service from command line mode. can any one please answer?
    I have tried following one but no luck...
    ./ccm.sh -stop SIA.InputFileRepository -cms  cmsname:6400 -username xxxx -password xxxx -authentication secEnterprise
    Thanks,
    Anil

    Hi,
    As suggested by  Julian you could look into the KB Article for the reference.
    Just run ccm.exe /help in a Command Window (cmd) to see full list of supported commands.
    Here are sample commands on windows if else you could not access to KB article:
    "C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ccm.exe" -managedstop machine1.WebIntelligenceProcessingServer -cms machine1:6500 -username SysAdmin -password 35%bC5@5 -authentication secLDAP"
    "C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ccm.exe" -managedstart machine1.WebIntelligenceProcessingServer -cms machine1:6500 -username SysAdmin -password 35%bC5@5 -authentication secLDAP"
    "C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ccm.exe" -managedrestart machine1.WebIntelligenceProcessingServer -cms machine1:6500 -username SysAdmin -password 35%bC5@5 -authentication secLDAP"
    To enable/disable the same service use the following without the "managed" parameter :-
    "C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ccm.exe" -enable machine1.WebIntelligenceProcessingServer -cms machine1:6500 -username SysAdmin -password 35%bC5@5 -authentication secLDAP"
    "C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ccm.exe" -disable machine1.WebIntelligenceProcessingServer -cms machine1:6500 -username SysAdmin -password 35%bC5@5 -authentication secLDAP"
    Hope this helps
    Regards,
    Rameez

  • Crystal Reports in Command Line mode

    Where can i find a complete list of the different parameters i can use crystal reports in command line mode with?

    Command-line mode?
    Sincerely,
    Ted Ueda

  • Command line parameters for automator?

    I'm trying to setup a cron job to so that every morning at 8 am "New Mail.workflow" will open and run. I'm able to get it to open but I was wondering if there were command line parameters for Automator that could open AND run a workflow file? Ideally I'd like it to close after running, but I'll worry about that later. Thanks in advance.

    The preferred way is to save your workflow as an application and then call usr/bin/open on it. If for some reason you must have the workflow run inside of Automator (not self-contained) then you're looking at some quality time with man osascript. As it happens Apple has removed even the need for Cron for most users. A click to File -> Save As Plug-In -> for iCal handles it from start to finish.
    Edit: I forgot to mention that Automator has its own simple command line utility for running *.workflow files. Check out man automator

  • Command line parameters for al_engine.exe

    If you go to a command line window on a DS server and type al_engine.exe with no parameters it prints "Usage" information.  Some of the parameters it mentions are known to the community (like -XX, -XI, etc).  However there are some which sound pretty interesting, but I can't find any information or examples how it should be used.  Examples:
    -L<list of value> : List of Object Labels from UI (separated by , or ; or space) to filter.
    -Je<XML file> Execute the Installation scenario defined in XML file.
    -jd"datastore delta file in quotes>" : Modify datastore values using "file"
    -Jf, -Ja, -We,  and many more.
    I am particularily interested in -Je functiohnality - it sounds like it can be used to automate deployment.  I am using import/export options to do some automation, but real automation would include deletion of some objects, adding jobs to projects, etc.
    Can anybody help with the documentation/examples?

    The preferred way is to save your workflow as an application and then call usr/bin/open on it. If for some reason you must have the workflow run inside of Automator (not self-contained) then you're looking at some quality time with man osascript. As it happens Apple has removed even the need for Cron for most users. A click to File -> Save As Plug-In -> for iCal handles it from start to finish.
    Edit: I forgot to mention that Automator has its own simple command line utility for running *.workflow files. Check out man automator

  • Command Line Parameters for Run Application.vi in the LVWUtil

    I am trying to use the "Run Application.vi" located in the LVWUtil.llb.  I am sending a command line similiar to this:
    "C:\WINXP\system32\msiexec.exe" /i "C:\qc data\ZVMS Program Updates\Application Installer\install.msi"
    this command line works from the Start>Run dialog but the Run Application.vi only sees the beginning of the line "C:\WINXP\system32\msiexec.exe" so it opens the windows installler but does not go to the install.msi file and run it.  Does anyone know the correct command line formats for the Run Application.vi to run the entire command line?
    Thanks,
    BethV

    Hello BethV,
    I downloaded the LVWUtil32.zip file from the Windows API Function Utilities (32-bit) for LabVIEW example program.  In that zip file, is a library entitled Winevent.lib, which includes the Run Application.vi.  When you used this VI, I believe the string you passed in as a input had too many quotation marks.  Namely, you do not need quotes around the msiexec.exe call.  I passed the following string into the Run Application.vi and got the expected results:
    C:\WINDOWS\system32\msiexec.exe /i "C:\mymsi.msi"
    Please let me know if it helps.
    Message Edited by Wendy L on 10-21-2005 02:34 PM
    Wendy L
    LabWindows/CVI Developer Newsletter - ni.com/cvinews
    Attachments:
    RunApplication.GIF ‏2 KB

  • What are the commands for compiling c++ using the command line tools for xcode?

    Hi, I am taking a class in school for c++ and i would like ot be able to practice at home i found the command line tools for xcode and went ahead and installed it on my computer. now i need to know the commands and procedure to be able to compile and run c++.

    c++ testfile.cc

  • Using Command Line Tool for Linux

    I have to use the command lines of Linux for SCM commands(like repcmd, set workarea, checkin etc...)
    should I have to install something?
    I have documentation for using the oracle repository command line Toll for Windows and Unix, but I didn't found anything about using the oracle repository command line Toll for Linux.

    JDeveloper runs excellent on Linux and is supposed to be able to use the repository, but that's a GUI...

  • Command line tools for xcode??

    I am used to compiling code much like the java sdk works from terminal where I say javac the filename and then i get a .class file that i can run by doing the command java and then the .class file after. I am now wanting to learn c++ and I dont feel like installing xcode all i want is a compiler that can run from terminal. i found command line tools for xcode on the apple developers site and i was wondering do i need xcode for this to run and after that what the commands are and how i compile/run the code. But my biggest question is still wether or not i need xcode to let command line tools work. ive read in a couple places i dont need it but in other ive read you do can i get help?!

    You don't need Xcode to compile your apps with; just the compiler/linker.
    Xcode is Apple's IDE.  One could write the same code in TextEdit but that wouldn't be easy nor fun.
    (Missed it by THAT much!) 

  • How to get the command line interface for WRT160NL router

    hi,
    How can I get the command line interface for WRT160NL router. please suggest.

    If you’re trying to access the web-based interface of your router, just use its default IP address (192.168.1.1). The Username is left blank and the Password is "admin". Here’s a quick link on how to do that.

Maybe you are looking for