Command line to automate disk management in 2008 R2

Hi, I am looking for some command line tools to allow me to manage disks in Windows 2008 R2. My idea is to automate some task, such as importing foreign disks, so that I can schedule the task in a regular basis. I know there are various powershell
cmdlets win 2012, however, it is limited in 2008 R2. Diskpart is OK but it doesn't have any logic build-in. Do you have any recommendation? Thanks.

Hi,
I think we cannot use WMI command line to import the foreign disk, please refer to the thread below to see if it helps:
which wmi class to check disk status
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/97fdb67b-ef64-4e55-be63-5b38a21836c5/which-wmi-class-to-check-disk-status?forum=winserverpowershell
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Command Line Cmds for User Management

Is there a command line command that will simply display the user groups that a user belongs to?
Is there a command line command that will simply add a supplied group name to the list of groups a user belongs to?
Finally, is there a command line command that will list all the defined groups in the system?
Thanks!

mac57 wrote:Is there a command line command that will simply display the user groups that a user belongs to?
# groups <user>
Is there a command line command that will simply add a supplied group name to the list of groups a user belongs to?
# gpasswd -a <user> <group>
Finally, is there a command line command that will list all the defined groups in the system?
Take a look at the first field of each line /etc/group file. There's probably a simpler way to do it, but:
# awk -F ":" '{print $1;}' </etc/group | sort
Hope that helps!

Picture Manager with command line for Bat files

Hello
I am wondering if Microsoft Picture manager has any command line switches i could use.
I resize thousands of photos weekly using Picture manager for a semi automated process. The resize is the part that is not automated. For some reason when using image magik the resize is done but it does not accept some images where i upload them, yet if
i do it in parallel with Office picture manager the Microsoft re-sized always work.
The process uses VB Access, downloads all images changes the extension from one card extensions to jpg and ammends the name. sorts the images to two folders.
Then i resize as a batch manually. Not difficult but needs hands on and have you tried changing the dimensions in picture manager when all are selected. tedious!
Then the final bat uploads to correct locations.
So my question, how to use command line with Microsoft picture manager. If not command line Powershell. I can not beleive that the program can not be opened specifying a folder and resize image dimension to use. I cant see the source code where i believe
it would be apparent to me how to do so.
Thank you
Sometimes the answer is so blindingly obvious i fail to see!

I have done it before on BOXI R2 with the IW, and it works fine
But any how, this is the way that we have to work with, since it is part of a customer product and the link universe and it's reports is an additional part of the product.
So is there a way that I can pull just the main universe and it's reports?

How can I Capture screen from command line

When I start FME from command line it automatically capture
from first camera
But I want it start capture form screem automatically
or I want to start 2 capture progress
1 form camare
2 form screen
Thanks

I don't print from the command line, so I don't know this off the top of my head. There are instructions for doing this in your CUPS documentation. Read Chapter 2 & 3 here:
http://localhost:631/sum.html

Run Sql command line is not openning.

Hi !
sql command line is not openning.(windows 2008 enterpise and oracel 11g express)
please tel me is there any other way to open it, i have tried it from the phyical directory also.
but oracel is working properlly.
i wanted it load data from captured data to oracle database. (i was migrating).
yours sincerely
Edited by: 944768 on Aug 14, 2012 12:12 AM

Open a command prompt (cmd), from there run:
c:\> sqlplus user/passwordHow do you plan to "load data", based on what format? Sqlplus might not be the right tool for the job.
Sql*loader is one option. Another option to help with migration is Oracle SQL Developer (separate, free tool).

Is there a command line option for VNC to automatically launch in fullscreen mode?

I can launch a VNC window from the command line, as such:
open vnc://username:password@hostname
... but I'd like it to automatically start in full screen mode. Is there a command line option for this?
I'm using an old MacMini purely to connect to another Mac over screen sharing, but when the MacMini boots I'd like it to go straight into the fullscreen of the other desktop.
Many thanks!

Set the Integer pref browser.sessionstore.max_resumed_crashes to 0 on the about:config page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
* http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes
That will allow you to deselect the tab(s) that you do not want to reopen, but will allow to reopen other tabs.
See:
* http://kb.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
* http://kb.mozillazine.org/Browser.sessionstore.max_resumed_crashes

Oracle VM Manager Command Line Interface

Can anybody suggest any tool for Oracle VM Manager Command Line Interface?
Are they free?
What kind of jobs we can automate using Command line?
If they are not free is it worth spending money to buy them?

Try public-yum.oracle.com
and look at the oracle-addons channel below OEL.
http://public-yum.oracle.com/repo/EnterpriseLinux/EL5/oracle_addons/i386/
Regards
Sebastian

Rpass - Secure, simple, and pluggable command-line password management

WARNING: this program requires a python version greater than or equal to 3.
EDIT: Fixed a bunch of bugs that made this unusable, please update!
EDIT: Added a default configuration file.
Hi there!
rpass is a command-line password manager that encrypts any and all credentials you would like to store using gpg's algorithms.
Gnome and Mac OS both have a universal credential solution, but to my knowledge there is no such generic linux application. Gnome's keyring code is long and personally, I don't trust it as much as the simple system I have in place in rpass - it is transparent and easy to understand, and any possible security holes would be blatantly visible.
rpass can be used directly from the commandline, typing your master password (gpg passphrase) in every time, but it really shines when gpg-agent and xclip are installed. gpg-agent saves your passphrase for an interval of time, so you only have to authenticate yourself occaisonally, and the powerful search capabilities of rpass (regex-enabled) allow simple and quick account selection.
Furthermore, with xclip installed passwords NEVER have to be printed onscreen - the first matching entry's password is automatically copied to the clipboard if a search is done with rpass. You can even run rpass from applications like 'dmenu', and although there will be no visible output, if you enter a search term after rpass you will have the password you wanted copied to your clipboard.
Finally, it can also be easily integrated in other applications -- I use it for my email (mutt) and any script I write that requires a password.
AUR Link: http://aur.archlinux.org/packages.php?ID=44788
More detailed documentation and explanation can be found at: https://github.com/rscare/rpass/blob/ma … E.asciidoc (scroll down)
or with
$ man rpass
after installation.
git repository: git://github.com/rscare/rpass.git
Please comment on the software and the documentation. Thank you very much for taking the time to try my software.
Last edited by RedScare (2010-12-27 07:04:44)

I'm very interested in this. However... on the initial run, pressing enter causes a crash:
$ rpass
Need to first create gpg key pair.
Choose a secure passphrase -- this is going to be your master password.
Rerun program after key creation.
WARNING: DO NOT pick a sign-only key type.
Press [ENTER] when ready.
Traceback (most recent call last):
File "/usr/bin/rpass_py_interface", line 80, in <module>
input("Press [ENTER] when ready.")
File "<string>", line 0
^
SyntaxError: unexpected EOF while parsing
I got around this by entering junk and I made my key. After rerunning rpass with the key generated:
$ rpass
Traceback (most recent call last):
File "/usr/bin/rpass_py_interface", line 84, in <module>
if not(IsRunning(gpg-agent)):
File "/usr/lib/python2.7/site-packages/rpass.py", line 24, in IsRunning
plist = [re.match(ppatt, p.strip()).groups()[0] for p in str(proc.communicate()[0], encoding=utf-8).split(n)[1:-1]]
TypeError: str() takes at most 1 argument (2 given)
Looks like rpass expects the gpg-agent to be running when it starts.
edit: rather, it expects the gpg-agent to be running with the key loaded. gpg-agent was already loaded thanks to keychain but without my newly created key known to it.
Last edited by falconindy (2010-12-26 03:42:28)

Command Line and Resource Manager

When using the command line to compile a Robohelp project, is there a way to update the shared resources within the project before generation?
For example, say you have Project1 and it is using snippet1 in that project. However, snippet1 has been modified in the resource manager (just say, for argument's sake, that snippet1 is also used in Project2, and you modified the snippet there and synced it to the resource manager). When you do a regular command line compile, the snippet is not updated.
Is there a way to sync the snippets and images from the resource manager in the project before doing the command line compile (other than opening the project and syncing manually)? After all, if I have to open the project, there's no reason to command line compile since I'm already there and can just compile it from the project.
Thanks!

I don't think that is possible as, correct me if I am wrong, even within RoboHelp the images don't get updated automatically. It's something you have to do.
It's a good point though so I suggest submitting a feature request.
The more people who request a feature, the more likely it is to be actioned. Please follow this link.
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Achiving of reports uing catalog manager command line

Hi ,
I want to automate the archiving of reports using catalog manager command line using Unix/Linux . Has anyone archived the reports like this . Please help . I am using OBIEE 11.1.1.6 and want to archive all the reports of the OBIEE catalog .

You need to have the proper physical address of each report and corresponding files for that particular report to archive, you need to pass them as command line arguments.
I would say it is time consuming process to validate your automation, more over you need to go with online mode to get security in place for catalog objects.
I can feel the complex part thats the reason asked you to share the code

Installing SQL Server 2008 R2 via command line - setup100.exe returned exit code 0x84BC06B2

I am receiving an exit code 0x84BC06B2 when installing SQLExpress via the command line on a PC that also has SQL Server 2012 installed. Below is the log file generated:
11/18/2014 01:02:41.631 Help display: false
11/18/2014 01:02:41.642 Checking to see if we need to install .Net version 2.0
11/18/2014 01:02:41.653 Determining the cluster status of the local machine.
11/18/2014 01:02:41.665 The local machine is not configured as a cluster node.
11/18/2014 01:02:41.675 Attempting to find media for .Net version 2.0
11/18/2014 01:02:41.686 .Net version 2.0 is installed
11/18/2014 01:02:41.697 RedistMSI::GetExpectedBuildRevision - Setup expects MSI 4.5.6001.22159 at the minimum
11/18/2014 01:02:41.709 Attempting to get Windows Installer version
11/18/2014 01:02:41.721 Windows Installer version detected: 5.0.7601.18493
11/18/2014 01:02:41.733 RedistMSI::IsVistaRTM - Not Vista RTM build
11/18/2014 01:02:41.745 Required version of Windows Installer is already installed
11/18/2014 01:02:41.772 Strong name verification disabling is not required
11/18/2014 01:02:41.781 /? or /HELP or /ACTION=HELP specified: false
11/18/2014 01:02:41.793 Help display: false
11/18/2014 01:02:41.805 Attempting to launch landing page workflow
11/18/2014 01:02:41.816 Attempting to set setup mutex
11/18/2014 01:02:41.827 Setup mutex has been set
11/18/2014 01:02:41.838 Attempting to launch global rules workflow
11/18/2014 01:02:41.849 Media source: c:\sqlexpress\
11/18/2014 01:02:41.860 Install media path: c:\sqlexpress\x86\setup\
11/18/2014 01:02:41.870 Media layout: Core
11/18/2014 01:02:41.881 Attempting to get execution timestamp
11/18/2014 01:02:41.892 Timestamp: 20141118_010240
11/18/2014 01:02:41.903 Attempting to run workflow RUNRULES /RULES=GlobalRules
11/18/2014 01:02:41.915 Attempting to launch process c:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\SQLServer2008R2\x86\setup100.exe
11/18/2014 01:02:50.467 Process returned exit code: 0x00000000
11/18/2014 01:02:50.484 Workflow RUNRULES /RULES=GlobalRules returned exit code: 0x00000000
11/18/2014 01:02:50.496 Attempting to launch component update workflow
11/18/2014 01:02:50.509 Media source: c:\sqlexpress\
11/18/2014 01:02:50.522 Install media path: c:\sqlexpress\x86\setup\
11/18/2014 01:02:50.534 Media layout: Core
11/18/2014 01:02:50.546 Attempting to get execution timestamp
11/18/2014 01:02:50.558 Timestamp: 20141118_010240
11/18/2014 01:02:50.570 Attempting to run workflow COMPONENTUPDATE
11/18/2014 01:02:50.581 Attempting to launch process c:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\SQLServer2008R2\x86\setup100.exe
11/18/2014 01:03:02.572 Process returned exit code: 0x00000000
11/18/2014 01:03:02.590 Workflow COMPONENTUPDATE returned exit code: 0x00000000
11/18/2014 01:03:02.602 Attempting to launch user requested workflow locally
11/18/2014 01:03:02.614 Attempting to find local setup.exe
11/18/2014 01:03:02.626 Local bootstrap folder path: c:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\
11/18/2014 01:03:02.639 Local setup100.exe full path: c:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\SQLServer2008R2\x86\setup100.exe
11/18/2014 01:03:02.650 Media source: c:\sqlexpress\
11/18/2014 01:03:02.661 Install media path: c:\sqlexpress\x86\setup\
11/18/2014 01:03:02.672 Media layout: Core
11/18/2014 01:03:02.684 Attempting to get execution timestamp
11/18/2014 01:03:02.695 Timestamp: 20141118_010240
11/18/2014 01:03:02.706 Attempting to run user requested action from local setup100.exe
11/18/2014 01:03:02.717 Attempting to launch process c:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\SQLServer2008R2\x86\setup100.exe
11/18/2014 01:07:28.302 Process returned exit code: 0x84BC06B2
11/18/2014 01:07:28.314 Local setup100.exe returned exit code: 0x84BC06B2
11/18/2014 01:07:28.326 Attempting to release setup mutex
11/18/2014 01:07:28.338 Setup mutex has been released
11/18/2014 01:07:28.351 Setup closed with exit code: 0x84C40013
11/18/2014 01:07:28.362 ======================================================================
Does anyone have any ideas of why this is failing?

Here is the summary.txt:
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068052302
Exit facility code: 1212
Exit error code: 1714
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2014-11-18 01:03:03
End time: 2014-11-18 01:07:23
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141118_010240\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.1600.1%26EvtType%3d0xE53883A0%400xBE03358B%401306%4023
Machine Properties:
Machine name: PC81372
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services 1033
Express Edition 10.2.4000.0 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication 1033
Express Edition 10.2.4000.0 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: c:\sqlexpress\x86\setup\
Installation edition: EXPRESS
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Automatic
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141118_010240\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: True
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: True
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: WORKSTUDIO
INSTANCENAME: WORKSTUDIO
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: True
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: BUILTIN\USERS
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 1
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141118_010240\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 1714
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141118_010240\sql_engine_core_shared_loc_Cpu32_1033_1.log
MSI error description: The older version of SQL Server 2008 R2 Database Engine Shared cannot be removed. Contact your technical support group.
Configuration status: Failed: see details below
Configuration error code: 0xBE03358B@1306@23
Configuration error description: Could not find the Database Engine startup handle.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141118_010240\Detail.txt
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xBE03358B@1306@23
Configuration error description: Could not find the Database Engine startup handle.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141118_010240\Detail.txt
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141118_010240\SystemConfigurationCheck_Report.htm

SQL Server 2008 Express Installation with command line options , FAILED.

HI,
I Have SQL Server 2005 Express instances on my PC. Now i am trying to install 2008 Express edition with Advance Services(Reporting.)
I am trying to install the SQL Server 2008 Express with command line Options.
/qs /Action=Install /Hideconsole /SecurityMode=SQL /Features=SQL,Tools,RS /InstanceName=XXXXXX /SAPWD="StrongPassword" /SQLSYSADMINACCOUNTS="Builtin\Administrators" /SQLSVCACCOUNT="NT AUTHORITY\SYSTEM" /RSSVCACCOUNT="NT
AUTHORITY\SYSTEM" /BROWSERSVCSTARTUPTYPE=Automatic /TCPENABLED=1 /NPENABLED=1
But installation exits. It says the previous version 2005 tool are already exists, Remove them to Continue the 2008 Server Installation.
please suggest me how to avoid that check and continue installation by replacing the older tool with 2008 automatically.
regards
Pratap M:)

Have you found any error in event logs?
In my case even after uninstalling all 2005 related components it didn't worked. I had to resort to a brute force way and
remove following registry keys
32 Bit OS: HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\90
64 Bit OS: HKLM\Software\Wow6432Node\Microsoft\Microsoft SQL Server\90
Check below threads
http://stackoverflow.com/questions/175881/sql-server-express-2008-install-side-by-side-w-sql-2005-express-fails
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/5fc58507-9f40-4213-acbd-32a57c8822d7/cant-uninstall-sql-server-2005-express-tools?forum=sqlsetupandupgrade
Please click the Mark as answer button and vote as helpful if this reply solves your problem

Command Line Disk Share with Windows

I am running Solaris 10 (SunOS 5.10) without the GUI interface. I cannot, therefore, run the Solaris Management Console.
How do I share my disk with Windows systems on the same network using the command line?

you can use samba for sharing its comes with solaris 10 , or use solaris 10 as nfs server and use PCNFS on windows end to mount the disk
in solaris most of things dont require GUI , thats its beauty :)
regards

OVS 2.2 :: Unable to install RHEL HVM on physical disk from command line

[root@ovs2 xen]# /usr/sbin/virt-install hvm name=test2 ram=1024 vcpus=1 bridge=xenbr0 file /dev/sdc --nographics
What would you like to use for the virtual CD image? /var/ovs/mount/1FB2E6B36D21418792A1DD30B62C689F/iso_pool/rhel-server-5.6-x86_64-dvd.iso
Starting install...
Guest installation complete... restarting guest.
exception was: Domain named test2 already exists!
Domain installation may not have been
successful. If it was, you can restart your domain
by running 'xm create -c test2'; otherwise, please
restart your installation.
[root@ovs2 xen]# more test2
# Automatically generated xen config file
name = "test2"
builder = "hvm"
memory = "1024"
disk = [ 'phy:/dev/sdc,hda,w', ]
vif = [ 'type=ioemu, mac=00:16:3e:3d:d0:5c, bridge=xenbr0', ]
uuid = "f99f6a07-6d03-a0ae-8f2f-a7a0e1af5e31"
device_model = "/usr/lib/xen/bin/qemu-dm"
kernel = "/usr/lib/xen/boot/hvmloader"
nographic=1
timer_mode=0
apic=1
acpi=1
pae=1
vcpus=1
serial = "pty" # enable serial console
on_reboot = 'restart'
on_crash = 'restart'
[root@ovs2 xen]# xm console test2
xenconsole: Could not read tty from store: No such file or directory
[root@ovs2 xen]#
+ No errors in xend.log or qemu-*.log
+ hypervisor inittab is default .. co:2345:respawn:/sbin/agetty xvc0 9600 vt100-nav
Using similar syntax, and installing paravirtualized guest to physical disk works fine.
[root@ovs2 xen]# /usr/sbin/virt-install paravirt name=demo3 ram=1024 vcpus=2 bridge=xenbr0 file=/dev/sdc nographics location=http://192.168.229.74/RHEL5764bit
Starting install...
Bootdata ok (command line is method=http://192.168.229.74/RHEL5764bit )
Linux version 2.6.18-238.el5xen ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-50)) #1 SMP Sun Dec 19 14:42:02 EST 2010
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000040800000 (usable)
No mptable found.
Built 1 zonelists. Total pages: 264192
Kernel command line: method=http://192.168.229.74/RHEL5764bit ...................................
Any suggestions ??

and i go to the temp mountpoint that the script will mount on
Starting install...
ERROR: Invalid NFS location given: [Errno 2] No such file or directory: '/var/lib/xen/xennfs.7x4Rf4/boot/x86_64/vmlinuz-xen'
[root@ovs2 opt1]# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/cciss/c0d0p2 3050092 3033308 0 100% /
/dev/cciss/c0d0p1 101086 47114 48753 50% /boot
tmpfs 288856 0 288856 0% /dev/shm
none 288768 40 288728 1% /var/lib/xenstored
/dev/cciss/c0d0p3 288623616 301056 288322560 1% /var/ovs/mount/A52CB661C1CF41D198D50F6379822694
/var/isos/OracleLinux-R5-U7-Server-x86_64-dvd.iso
3755446 3755446 0 100% /el/EL5-x86
192.168.229.110:/el/EL5-x86
3755456 3755456 0 100% /opt1
192.168.229.110:/el/EL5-x86/
3755456 3755456 0 100% /var/lib/xen/xennfs.NnE54I
[root@ovs2 opt1]# cd /var/lib/xen/xen
xend-db/ xennfs.7jHT0q/ xennfs.fQNnQD/ xennfs.LR6hDx/ xennfs.QnxyeH/
xennfs.5Pr0vm/ xennfs.8aMSAA/ xennfs.fRhXiN/ xennfs.NnE54I/ xennfs.yEw4KL/
[root@ovs2 opt1]# cd /var/lib/xen/xen
xend-db/ xennfs.7jHT0q/ xennfs.fQNnQD/ xennfs.LR6hDx/ xennfs.QnxyeH/
xennfs.5Pr0vm/ xennfs.8aMSAA/ xennfs.fRhXiN/ xennfs.NnE54I/ xennfs.yEw4KL/
[root@ovs2 opt1]# cd /var/lib/xen/xennfs.NnE54I/
[root@ovs2 xennfs.NnE54I]# ls
blafdoc.css EULA GPL README-en RELEASE-NOTES-en.html Server VT
Cluster eula.en_US images README-en.html RPM-GPG-KEY supportinfo
ClusterStorage eula.py isolinux RELEASE-NOTES-en RPM-GPG-KEY-oracle TRANS.TBL
[root@ovs2 xennfs.NnE54I]# find . -name vmlinuz\*
./images/pxeboot/vmlinuz
./images/xen/vmlinuz
./isolinux/vmlinuz
[root@ovs2 xennfs.NnE54I]#

Problem using extension manager CS5 with command line

Hi All,
I had posted my question here : http://forums.adobe.com/message/4695419#4695419, but was advised to do so here as well..
I have a requirement to get the path of all the installed Extension Managers on any Windows system for the purpose of installing an extension.. I thought, there would be no problem in getting the path from the registry. There was no problem in Win XP, but the same does not work for Win 7.. I googled, and found alternate ways to get the path.
Here is the link : http://forums.adobe.com/thread/851359. I followed the instructions in this post, but failed to get this working for CS5 as mentioned in my previous thread... No problem for CS5.1 and CS6.. Why is that?
I want to get this working for CS5, CS5.1, CS6... How can I get the path of all the Extension Manager versions installed on a Windows system?
Please refer to the following screenshots to get a better understanding of my problem,
I created a jsx file named "Result.jsx", which I saved in my D drive, with the following code,
resultFile = new File("D:/result.log");
resultFile.open("w");
resultFile.write(BridgeTalk.__diagnostics__);
resultFile.close();
If I run this directly from ESTK CS5, there is no problem, and I get the result.log file. I tried to execute this script via command line as shown in the screenshot,
On executing the above, I got the following error,
What is going wrong?
Please help!

I am sorry for the poor documentation of Extension Manager which causes you so much trouble.
1. You can use BridgeTalk API to ask specific version of Extension Manager to do something. There is sample in packaging_extension.pdf about this. You don't need to know the installation path of Extension Manager. One thing to note is that the value of bt.target is version specific, i.e. "exman-5.0", "exman-5.5" send this message to different version of Extension Manager, so you can change this value to install/enable/disable/remove extensions using different version of Extension Manager. More detailed documentation of BridgeTalk can be found by clicking "Help" menu then clicking "Javascript Tools Guide CS5" in "Adobe ExtendScript Toolkit CS5".
2. Specific version of Extension Manager only manage extensions for corresponding version of product. You should use Extension Manager CS5 to install extensions for Photoshop CS5. The reason that the extension you installed for Photoshop CS5.1 using Extension Manager CS5.5 is displayed for Photoshop CS5 in Extension Manager CS5 is that two versions of Photoshop specified the same directory for Extension Manager to manage extensions. This is a defect and will cause some problems if multiple versions of Photoshop co-existed in one machine. But "to find previous (CS5) extension manager and to enable it" should work for you, I guess you use command line to enable it and specify wrong product name (see #3) so that it doesn't work.
3. When using command line, you should specify "product" attribute with the name displayed at the left panel of Extension Manager. So "Photoshop CS5 32" is correct. Remember to enclose it with double quote because of existence of space character.
4. As above mentioned, use display name of Photoshop, and call proper version of Extension Manager by BridgeTalk.

Command line to automate disk management in 2008 R2

Similar Messages

Maybe you are looking for