Command node inserted in the main window

I have inserted a command note at the last window in order to get a third page in my form which is not connected to the First page . But the issue is due to this command node 2 footer wondows which are placed just after the main window are not getting printed. Kindly help me on that.

Are you able to print 3rd page contains ??? It should work as I have done the same.
in 1st page I call command node with GO to New page as LAST PAGE.
Then inserted my text which need to print on the last page.
After that I created Footer window. Which perfectly displaying.
In the last page I have done the same except command node.

Similar Messages

Hi Experts, can the secondary windows be processed after the main window?

Hi Experts,
at the end of the main window there is a command node and can the secondary windows be processed after the main window? thanks for your reply.
Kind regards
Dawson

Hello Dawson
No it can't Process the secondary window if you are calling a new Page in that command line.
Even if it gets called I don't think it will give the desired output.
Give it a try, But I am sure its not going to give you the desired output instead attach the command line to the end of your secondary window and in condition tab of secondary window check the check box "Only after Main window".
Hope this discussion was helpful.
Cheers,
Suvendu

Can't see the Vertical line command in the main window of SAP Script.

Hi,
I have a peculiar situation where, I am not able to see the command through which vertical line separators are coded in the script within the main window. Can any one help me find this...?
Regards,
Owais...

Hi Ravi Kant,
       What does this mean?
/E           ITEM_YWERT
WH           &rwerter-wert(10)&,,&vline&
/E           ITEM_TAB
/:           CASE &VARPOSR-YZEILE&
/:           WHEN '0001'
/:           DEFINE &TAB& = ',,'
/:           WHEN '0002'
/:           DEFINE &TAB& = ',,,,'
/:           WHEN '0003'
/:           DEFINE &TAB& = ',,,,,,'
/:           WHEN '0004'
/:           DEFINE &TAB& = ',,,,,,,,'
/:           WHEN '0005'
/:           DEFINE &TAB& = ',,,,,,,,,,'
/:           WHEN '0006'
/:           DEFINE &TAB& = ',,,,,,,,,,,,'
/:           WHEN '0007'
/:           DEFINE &TAB& = ',,,,,,,,,,,,,,'
/:           WHEN OTHERS.
*           Tab. not defined
/:           ENDCASE

The main window of third page will not display the text element

Hey, smartform guru,
I am working on the smartform to print PO data.
The smartform has first page and next page as usual.
I created a third page P_TERMS to print the terms and conditions for PO printout.
I used commend node to assign the page P_TERMS as the "Go to new page" and it did go to the P_TERMS page but the text element will not print in the main window in P_TERMS page.
The text element will print in the secondary window.Since the terams and conditions are 4 pages long, I expected it to print in the main window, so I do not have to define several extra pages to print them.
Any idea?
Thanks in advance!
Fisher Li

Hi Fisher,
Unfortunately, In a smartform, only single main window is continued to all pages even though you can declare windows under each page as main window, but it actually acts as the same window for all pages. It just means that if text from 1st page is overflowed, it will continue to the next page with main window.
Command line to go to next page will create an extra page but since text is not flowed in main window, it won't print the text element you have included in main window on third page.
The solution to your problem as I see is that either you include your terms and conditions in the main window of your first page and just before your text element for T&Cs, use Command to go to third page.
Hope it helps.
Ravi

Is it possible to update a Command node on just the First Page?

Hello Experts,
I am attempting to add a line count with a value on the condition tab of a Command node but it keeps also applying the same change to the same Command node on the NEXT page. I want to add the linecount to the subsequent Command node but with a different value. Is it possible to only make changes to the command node on one page without also changing the command node on another page. I tried the settings under 'And additional event' Only on first page etc but it didn't make any difference
The Command node is located in the Main window within a Table node just before the footer.
Regards
Mike Spear.

Hello Experts,
Thanks for taking the trouble to reply.
I find which ever conditions I set on the command node on first page also appear on command node of next page.
I'm using the command node to throw to a new page depending on a linecount. Because the main window on the next page is longer than the main window on the first page the linecount is a larger number.
Best Regards
Mike.

How to print items in the MAIN window of the NEXT page (smartform)?

Dear forumers,
There are two pages (FIRST and NEXT) in my smartform with the same MAIN windows in each of the pages. Whatever that are changed in FIRST-MAIN window will also be seen in NEXT-MAIN window.
I will need to control the printing of table TABLE3 contents (already contained in the MAIN window) such that if a variable V_MAT_PRINT is 'X', the TABLE3 contents will only be printed in NEXT page and not printed in FIRST page at all.
How may I achieve this? Please help.
Thank you.

>
Mohammed Ahasanullah Mulla wrote:
> Hi Deborah,
>
> I had also faced a similar situation,in my case it was three pages..However i will try to tell you for 2 pages..After the second table .Add a program lines and force a page break only if V_MAT_PRINT is 'X'. After the program lines add a command and make the go to new page as second page.This will solve your problem.I have done the same and its working fine .If you have any questions do ask.
>
> Thanks,
> Ahsan
Hi Ahsan,
Here's my case.
If V_MAT_PRINT is 'X', print the following:-
FIRST page, MAIN window
- TABLE1
- TABLE2
- TABLE4
- TABLE5
NEXT page, MAIN window
- TABLE3
If V_MAT_PRINT is not 'X', print the following (no additional controls / changes are needed, everything remains unchanged):-
MAIN window
- TABLE1
- TABLE2
- TABLE3
- TABLE4
- TABLE5
In this case, is a page break suitable? I doubt it as TABLE4 and TABLE5 will still need to be printed back on the FIRST page regardless of the V_MAT_PRINT value.
Please advise further. Thanks.

Printing from the main window -- song order is not the same as playlist ??

iTunes 10.0.1 (22)
OS 10.6.4
Let's say you have a album with 18 songs. The songs are in the exact order of the album, from 1 of 18 all the way to 18 of 18. (track numbers are also correct, in order). You view by album (constrain the results window by searching for album title)
Now, print. Select any option, (I tried both cd jewel as well as song listing -- doesn't matter which you select).
The ORDER of the printed song list (or jewel case insert) DOES NOT MATCH the order of the songs in the album.
What good is that?
I can recreate this with various albums.
This NEVER happened before version 10.
Anyone have any info on this?
PS -- if you create a PLAYLIST and then copy the album into the playlist, it prints just fine. The issue is printing from the main window when in album view mode.
Thanks,
J
Message was edited by: Jeremy Roberts

Try changing X postion to not equal to zero something else for example.
/:           POSITION WINDOW
/:           POSITION XORIGIN '-0.1' CH YORIGIN '+0.4' LN
/:           SIZE WIDTH +0.7 CH HEIGHT +5.0 LN
/:           BOX FRAME 7 TW
/:           BOX HEIGHT '1.1' LN INTENSITY 15
Nabheet

Fixing the height of the maon area of a table in the main window in smartfo

hi all,
I have a requirement where I need to fix the height of the main area of a table in the main window in a smartform.

Hi,
If you need to fix the height of the main area of a table on a page.
Then use a loop node to loop the table with 1 to 6 rows and under the loop node make us of a template for displaying the fixed no of rows.
Regards,
Ram

Is X-windows and GUI desktops supported on the ODA "engineered system" running a RAC database? If it is, what is the yum command needed to install the X-windows, Gnome, and KDE package groups?

Is X-windows and GUI desktops supported on the ODA "engineered system" running a RAC database? If it is, what is the yum command needed to install the X-windows, Gnome, and KDE package groups?

While I agree with the direction of the suggestions with installing packages for X-windows, we do not have a blanket 'apply any package' recommendation.
In particular we do not support altering the kernel (although we do have exceptions which we review on a case by case basis).
Basically, if the you want to alter functionality that would not impact core functionality you are usually fine.
A good guideling is : The more dependencies that there are between the package / rpm you are considering using the higher the potential impact on functionality - meaning higher chance for problems
Note: We do use VNC including Real and Tiger regularly , but we have no hard recommendation on how you may want to use X-windows. I have never seen a limitation other than comments on bugs
or incompatibility within the X-window product itself with certain kernel levels.
Patching may overwrite some packages that you may install, however, _depending on packages/rpms added_ there is also the possibility that you will break existing functionality to the point
that patching itself will fail ( we have already seen a few cases of this in which case the proper mitigation is to remove / roll-back any alterations to the ODA before patching, and then adding the packages/rpms
back after the patching is completed.
From what you are discussing the impact should be low without conflicts, but please consider the above, and if you have specific packages which you consider potential problems
please create an SR so that we can review packages / rpms on an individual basis.
Once again: the main criteria for not supporting rpms is regarding the kernel itself
Chuck

Trouble getting thumbnail to open fully in the main window for editing.

I updated to 6.0.6 iphoto and I can't find a way to have my thumbnails taking up the whole main window...not the full screen. Previously when I double clicked on a thumbnail the pic opened in main window, taking up all the space in that window. Now it is just a small pic in the main window and I can't see enough detail to edit the pic.

The files in the Data file are the thumbnails used by iPhoto. The ! you're getting is because iPhoto has lost the link between the library and the original files that will be in the Originals folder.
I don't think it will work but you can try to rebuild the library as follows: launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the first three options.
If that doesn't work you'll have to start a new library and import the files in the Originals folder from the old library. Here's how:
Creating a new library while preserving the rolls from the original.
Move the existing library folder to the desktop.
Launch iPhoto and, when asked, select the option to create a new library.
Drag the Originals folder from the desktop into the open iPhoto window.
This will create a new library with the same rolls as the original library. However dates on the rolls may be different but can be edited as you would the roll title.
Once this is completed you can delete the Originals folder from the desktop and the iPhoto Llibrary folder. If desired, you can keep the older library folder to try other fixes on it.
In the future I recommend you make a backup copy of the Library6.iPhoto file after each import and after doing a lot of editing and organizing in the library. Then if you experience a similar crash all you need to do is replace the damaged database file with the backup copy and you'll be back to the same place in the library as when you make the backup. See the tip at the end of my signature.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

IMovie starts but wont show the main window

I have been trying to figure out why iMovie will not start correctly. The system log is not very useful as it doesn't give me the name of the file archive that is incomprehensible:
8/14/09 11:03:53 AM iMovie[1332] * -[NSKeyedUnarchiver initForReadingWithData:]: incomprehensible archive (0x62, 0x70, 0x6c, 0x69, 0x73, 0x74, 0x30, 0x30)
iMovie doesn't terminate, it just fails to show the main window and there is no way from the menu/keyboard to show it. It still quits normally using COMMAND+Q/menu. I've removed iMovie preferences, removed iMovie and reinstalled, and even moved the projects folder. Still nada.
To dispel the common things; I have 4GB of memory and that disk has about 200GB left on the main drive.
Any help?

Just in case, I found the solution - http://discussions.apple.com/message.jspa?messageID=10112664#10112664

Smartform doesn't show preview when the records exceed the main window size

Hi
When i print the smart form having line items exceeding the main window size on the page it does not show the preview. The internal table loop goes into infinite loop. Is there any means whereby if the records don't fit on the main window of the page will be continued to the next page. Right now I have no clue how it is to be resolved. I feel the problem is in layout, as when i remove the main window the internal table code works fine and it does not move in infinite loop. Please help me resolve this issue.
Thanks in advance

Hi
I have deleted the table from main window and instead inserted a loop.
Also i created the two pages. But the problem still persists.
But for my requirement my each line item in the main window has 3 lines.
Also my layout will be the same for all pages so is there a need to create a new page.
Is there any mechanism whereby if the line items dont fit on the mainwindow of the page will automatically continue on another page without having to define it.. please guide? Right now the smartform goes in infinite loop if it doesn't fit in main window size
Thanks

Anyway to get sound from the main window only?

If you have mulitple quicktime windows playing is there anyway to get sound from only one when you make it the main window?

Open QuickTime Player 7.6.6.
Command-, (comma key) to open the Player preferences / General tab
Sound: Play sound in frontmost player only.

I open iWeb but the main window doesn't open/appear on screen. The little windows like the inspector and font windows appear. Can anyone help?

I open iWeb but the main window doesn't open/appear on screen. The little windows like the inspector and font windows appear. Can anyone help?

Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
3 - launch iWeb and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT

How can I get the favorites from my favorites tool bar to open in the main window and not the sidebar?

I created a favorites toolbar. When I click on some of the icons, they open in the main window like I expect. Others open in a sidebar which I do not want and cannot even get to full size. How do I get all of them to open in the main window?

Generally, Bookmarks that open in the Sidebar are from links that you clicked on on web sites to add their Bookmark. To change that, right-click on the Bookmarks, opening in the Sidebar, choose "Properties" and un-check "Load this bookmark in the sidebar".
*For links and info on Bookmarks, see [https://support.mozilla.com/en-US/kb/how-do-i-use-bookmarks How do I use Bookmarks?]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Command node inserted in the main window

Similar Messages

Maybe you are looking for