Command+option+click no longer works?

Hi all.
I have always used the combination command+option+click a lot to switch app and hide all others. Last week, this combination stopped working in a few apps, and now it doesn't work anywhere. Either my computer has forgotten a few things, or there's been some strange background update that I'm not aware of. Anyone else with this problem?

Did you install anything last week?
Have you tried it in another user account? That will isolate it to your user account problem or system-wide.
Have you tried it in Safe Mode? That will isolate third-party software from interfering.
http://support.apple.com/kb/HT1564

Similar Messages

  • Command, Control, and Option keys no longer works with Citrix Receiver after upgrading to OSX 10.9.5

    At first my keyboard did not work with Citrix Receiver after upgrading to OSX 10.9.5 and I found the workaround by using "cmd + tab," however, once my keyboard work within Citrix, the "command, control, and option" keys no longer work.  Does anyone have a remedy for this?

    Keyboard no longer works with Citrix Receiver after upgrading to OSX 10.9.5

  • Command plus is no longer working for me correctly in Safari 8.0.2.

    Command plus is no longer working for me correctly in Safari 8.0.2.  When I use it to zoom in a safari window, it makes fonts bigger instead of scaling the entire page bigger like it used to.  What changed or what did I accidentally change?   This  is only happening in Safari.  When I use Command Plus in a Chrome or firefox browser window, it works perfectly still.
    To explain this a little better,  I have a 27" iMac.  When I open a browser widow in safari like yahoo.com,  The content fits in about a 10.5" section of the screen.  If i go to full screen or enlarge the window to fit the full screen the same 10.5" content is centered in my screen.  Previously, I could use Command Plus to zoom and the entire page would scale increasing from 10.5" to eventually filling the screen.  Now when I use command plus, the font's get bigger and bigger but the page width stays at 10.5"

    Hi petraidm,
    Welcome to the Support Communities!  If I'm understanding you correctly, it appears you have updated Safari to the latest version, but are still using Mountain Lion as your operating system, is that correct?
    You may need to adjust your screen resolution, or the zoom settings in the Accessibility pane of System preferences.   Usually, zooming changes the size of text or content in a window -- not the size of the window itself.   So I usually go to full screen mode in Safari, and then zoom in if I need to enlarge the text.
    OS X Mountain Lion: Zoom content on the screen
    http://support.apple.com/kb/PH11488
    If you have difficulty seeing or reading items on the screen, you can use Accessibility preferences to magnify items on the screen. You can zoom the entire screen or zoom the area that has keyboard focus in a separate window.
    Set up zoom
    Choose Apple menu > System Preferences, click Accessibility, and then click Zoom.
    Do either of the following:
    To zoom with keyboard shortcuts, select “Use keyboard shortcuts to zoom.”
    To zoom with your mouse or trackpad, select “Use scroll gesture with modifier keys to zoom.”
    Choose where the magnified content appears with the Zoom Style pop-up menu.To display it in a window near the mouse cursor, choose Picture-in-picture. To display it on the entire screen, choose Fullscreen.
    To set options for zoom or the zoom window, click More Options.More Options panel
    You can also turn on zooming by pressing Command (⌘)-Option (⌥)-F5 and selecting options in the Zoom section.
    Zoom with keyboard shortcuts
    To zoom in, press Command (⌘)-Option (⌥)-Equal Sign (=). To zoom out, press Command (⌘)-Option (⌥)-Minus Sign (-).
    If you chose Picture-in-picture zooming, a window appears near the mouse cursor with the magnified image. If you chose the Fullscreen zooming, the entire screen displays the magnified image.
    Zoom with a mouse or trackpad
    To zoom in and out, hold down the modifier key you specified while you perform the scroll gesture.
    For example, if you have a trackpad and used the default settings, zoom in by holding down the Control (^) key while you drag two fingers up on the trackpad. Zoom out by holding down the Control key while you drag two fingers down on the trackpad.
    If you chose Picture-in-picture zooming, a window appears near the mouse cursor with the magnified image. If you chose Fullscreen zooming, the entire screen displays the magnified image.
    Last Modified: Aug 8, 2013
    OS X Mountain Lion: Shortcuts for Accessibility preferences
    http://support.apple.com/kb/PH10566
    Turn zoom on or off
    Command (⌘)-Option (⌥)-8
    Zoom in
    Command (⌘)-Option (⌥)-Equal Sign (=)
    Zoom out
    Command (⌘)-Option (⌥)-Hyphen (-)
    Turn image smoothing on or off
    Command (⌘)-Option (⌥)-Backslash (\)
    Display the zoom window when needed
    Hold down Option (⌥)-Control (^). Release to close the window.
    OS X Mountain Lion: Adjust your display resolution
    http://support.apple.com/kb/PH11462
    I hope this information helps ....
    - Judy

  • My naviagtion toolbar is visible, but is not bold, and does not work. Also, my History option is no longer working, but it is visible.

    Firefox automatically updated yesterday, but when I logged on today to use the computer, my navigation toolbar was no longer operating. It is visible but it is in grey colour, and when I click on it, nothing happens. Also, since this update, my History option is no longer working. None of my history appears when I click on it. I never used to have any problems with either of these functions.

    -> Tap '''ALT''' key or press '''F10''' to show the Menu Bar
    -> go to Help Menu -> select '''Restart with Add-ons Disabled'''
    Firefox will close then it will open up with just basic Firefox. Now do this:
    -> Update Firefox to the latest version by going to Help Menu -> About Firefox -> click '''Check for Updates''' -> if an updated version is found then download the latest version and install it. After that follow these steps:
    -> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
    -> go to View Menu -> Toolbars -> unselect All Unwanted/Incompatible Toolbars
    -> go to Tools Menu -> Clear Recent History -> '''Time range to clear: select "EVERYTHING"''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies, Cache''' -> click '''Clear Now'''
    -> go to Tools Menu -> Options -> General -> in '''Startup''' section click '''Reset to Default''' button -> place Checkmark on '''Show the Downloads window when downloading a file''' -> select Radio Button option2 '''Always ask me where to save files'''
    -> go to Tools Menu -> Options -> Content -> place Checkmarks on:
    1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
    -> go to Tools Menu -> Options -> Privacy -> History section -> '''Firefox will: select "Remember History"'''
    -> go to Tools Menu -> Options -> Security -> place Checkmarks on:
    1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
    -> go to Tools Menu -> Options -> Advanced -> Network -> Offline Storage (Cache): click '''Clear Now''' button
    -> Click OK on Options window
    -> click the Favicon on SearchBar -> click '''Manage Search Engines''' -> select all Unwanted Search Engines and click '''Remove''' -> click OK
    -> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious/Incompatible Extensions (Add-ons)
    -> go to Tools Menu -> Add-ons -> Appearance section -> REMOVE All Unwanted/Suspicious/Incompatible Themes (Persona)
    -> Restart Firefox
    You can enable your Known & Trustworthy Add-ons and Themes later. Check and tell if its working.

  • The control click and external mouse right click no longer works when copying and pasting album art within itunes. Ex. Hit get info for one song to paste to the rest, copying the artwork wont work when it used to.

    The control click and external mouse right click no longer works when copying and pasting album art within itunes. Ex. Hit get info for one song to paste to the rest, copying the artwork wont work when it used to.

    Hello there, Teworsham90.
    The following Knowledge Base article reviews the process of adding artwork to content in your iTunes Library:
    iTunes: How to add artwork to songs and videos in your library
    http://support.apple.com/kb/HT1409
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Why was command-option-click functionality removed.  Please bring back.

    Can anyone fill me in on this issue.
    I used to use command-option-click hundreds of times a day.  Cleared out all windows and got me to the application I wanted to use.  It is, apparently, gone in Mavericks.
    I'd be interested to know  why it was removed.  I also want it back.
    And, I'd llike it brought back with the functionality changes so that the application I make active with the command leaves the "hide" options in the Application pulldown menu active.  My one complaint about the shortcut was that it grayed out the "hide" options so I had to click out of the application and back in to use them.
    Please, please, I really want the shortcut!
    --Kenoli

    totally agree- the loss of 'pinch to resize' is a disaster.
    It was one of the main reasons i'd use it over powerpoint.
    C'mon Apple!
    rob

  • My MacBook is frozen and Command/Option/Escape doesn't work. What do you suggest I do? Any suggestions?

    My MacBoook is frozen and Command/Option?escapedoesn't work. I tried turning it off manually, but that doesn't work either.  What doyou suggest?

    Any external BT keybaord or mouse that can be turned off and break a cycle in that interface?  Any external USB device or external monitor that can break a locked-loop on those dvices?
    Holding the power button for 10 seconds (maybe more) should hard-stop all (even background) processes.  Can leave the system unbottable if stopped at wrong point, so is a last resort.

  • IMac bocked on start up. Password forgotten. Command-option-p-r not working

    iMac bocked on start up. Password forgotten. Command-option-p-r not working

    "Bocked"? Is that a word?
    The key combination you mention is for resetting parameter RAM or PRAM.  Nothing really to do with passwords.
    At what stage is it asking for a password?

  • Right clicking no longer works in Safari

    Just yesterday, I started experiencing a strange problem with Safari--the right mouse button no longer works. I also tried the right clicking option with command + clicking on the touchpad and that doesn't work either. Right clicking works outside the Safari window and in all other programs, so I'm pretty much baffled. I tried restarting the computer/reopening Safari and it allows me to right click exactly once before the right click option stops working again. I'm not going to use Safari anymore until this problem is resolved, so if anyone has any idea what's going on, please let me know.

    While it is possible that a reinstallation is needed, let's start with some easier steps first. I would use some of the techniques described in [this article|http://support.apple.com/kb/HT1199].
    Do you have another user account on the computer? If not, create one (System Preferences > Accounts > Click on the lock to authenticate > click the "+" button to add a new account > fill in required info.) Next, log out of your usual account and log in to the other one. Launch Safari. Does the same issue occur?
    If yes, you have a system wide issue. If no, it is a user specific issue. There are different methods for troubleshooting each. Post back here with your results and we'll see what we need to do next.
    Best of luck.

  • My iPhoto images won't show, and Photo Library Repair will not open when I command-Option-click on the iPhoto icon.

    Some of my iPhoto albums will not show, as below:
    When I click on any of those individual albums, for a brief split second I can see the images displayed, but then they revert to this:
    Then if I click on any of those images, this image appears:
    I have real a lot of posts that say to click Command+Option while opening iPhoto and this will open the Photo Library Repair window, but... this is not happening. Each time I do it, iPhoto just opens as it normally does. I've tried about 10 times, closing iPhoto completely. I've tried through the dock icon and through the applications listing. Neither will open anything other than regular old iPhoto.
    Can anyone help me and suggest what I may be doing wrong, or are there any alternative was to open Photo Library Repair so I can rebuild my library? I really don't want to lose all of those photos, especially since some are really important and irreplaceable.
    Thanks.

    I have real a lot of posts that say to click Command+Option while opening iPhoto and this will open the Photo Library Repair window, but... this is not happening.
    Be sure you're holding the correct keys and that you're holding them long enough. Depress them before clicking on iPhoto and don't let go until the menu shows up.
    If you don't want to lose those photos, make a back up now. Hopefully it's not too late.

  • Option keys no longer working!

    Can any experienced user provide a solution for this seemingly simple problem? Since I upgraded to 10.6.8, my keyboard (first slim version, extended) option keys are dead. All other keys seem to be working normally.
    Here are just a few problems associated with it:
    8 I can no longer make a bullet (option 8) as you see here.
    8 I can no longer shut down my computer using command-option-control-eject. It restarts instead now.
    8 I can no longer perform various keyboard shortcuts in Adobe CS5 apps that require using the option key.
    How do I fix this...anyone?

    Thanks for the response. Option modifier key is set to Option.
    Thinking back again to when this first occurred, it actually started about a week before updating to 10.6.8. The first time I noticed it was when I upgraded to Adobe CS5 from CS3 and in InDesign was not able to change text leading using the option key. I thought CS5 might have a different keyboard shortcut for that, but no. Still, at that point, I didn't realize it was the option key that wasn't functioning until these other issues occurred. Could CS5 could have caused this? Perhaps I should go to the Adobe forum with this issue.

  • Right clicking no longer works in Java?

    Control clicking in Java no longer works on my new powerbook. Other applications seem to be fine.
    How do I correct this? If uninstalling and reinstalling Java is the answer, how do I do this. I have poked around a bit but cannot find an answer to this.

    Use the command key.

  • Illustrator CS6 Eyedropper tool SHIFT + CLICK no longer works!

    SHIFT + CLICK with the eyedropper tool does not apply color as it is supposed to anymore. It shows the color as applied according to the fill and stroke in the tool bar, but the object itself does not reflect that. This function worked perfectly up until recently and is now not working for no apparent reason. I use Windows 7. Everything is OK with the eyedropper options, all my updates are current. HELP!

    Everything is checked in the eyedropper tool option menu (appearance, character style, paragraph style). The tool ITSELF works just fine. However it is when I'm sampling a color while holding down shift that no longer works.

  • An iTunes key command I created no longer works after the recent update

    I created a key command years ago for joining tracks. (Command-J) When the iTunes 11 update happened, it stopped working. I know it is the same key command for View options but it always worked before. So even if I make it a new command, it still won't work.
    Anyone else have a similar problem?
    Thanks

    You shouldn't clear cookies on shut down, but let them expire instead.
    Details like websites remembering you (log you in automatically) are stored in a cookie.
    *Create a cookie 'allow' exception to keep such cookies, especially in case of secure websites and when cookies expire when Firefox is closed.
    *Firefox > Preferences > Privacy > "Use custom settings for history" > Cookies: Exceptions
    In case you use "Clear history when Firefox closes" or otherwise clear history:
    *do not clear the Cookies
    *do not clear the Site Preferences
    *https://support.mozilla.org/kb/remove-recent-browsing-search-and-download-history
    Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, passwords, and other website specific data.
    Clearing cookies will remove all specified (selected) cookies including cookies with an allow exception that you would like to keep.

  • Photoshop CS5 Clone Stamp Tool option-click just stopped working, why?

    I've been using clone stamp tool option-click (healing brush  option-click also) on Photoshop CS5 on my Mac 10.6.5 and it stopped  working suddenly on Monday.  Had just used it on Sunday.  So, I've tried  to isolate the problem.
    1. Went to Apple store and my keyboard and  mouse work fine on their inhouse systems running Photosochop CS5.   Problem still exists on home system.
    2. Adobe photoshop suggested I go back to Mac 10.6.3.  I did and problem still exits.
    3. Reset all presets in CS5.  Problem still exists.
    4.  Spent several hours with Adobe Photoshop tech on phone -- he couldn't  make it work remotely either using his keyboard.  Reloaded Photoshop  from scratch.  Problem still exists.
    Question:
    Could this be a hardware problem?  Graphic board problem? 
    Or is this a software problem aside from Mac OS and CS5?

    Hi Joan
    It sounds like you are not having fun at all : )
    >I talked with a for fee Mac guru today who says I need to wipe slate clean and install operating system from scratch since I did not use time machine.
    .....you ever notice how easy it is for a consultant to tell you what to do when they don't have to do it?
    ..... I wonder why the guru thought your system was gone if your new user account was working?
    If your new user account is working.... why not use it?  The system seems fine but something went screwy with the settings in your original account.
    hopefully someone else will chime in here with more insight before you start from scratch.

Maybe you are looking for

  • No Save As box appears

    We are using an MRP software package that when we create a report we want to export it to a PDF. This option was working fine up until April 20th. We use to click on the Export icon in the report, get a box that says export to what-- we choose Acroba

  • Motion 3 crash during training

    I purchased the Motion 3 training book While going threw lesson 2 it crashed over and over when I tried adding the "Sharpen" filter. Other than that I can't proceed to E.blendmodes.motn stage - it crashes again & again

  • Select-options in CATS_DA using BAdI

    How do you alter the selection screen options in CATS_DA?  I am using the CATS_REPORT BAdI and implemented a class ZCL_IM_CATS_REPORTING_01 using the interface IF_EX_CATS_REPORTING. The documentation states that the methods GET_SELECTION_VALUE and SE

  • WP8 - Different b/w Lock button and windows button pressed

    Hello, I need to differentiate the below scenarios: 1. Press Lock, then unlock button  and open the application 2. Press windows button and search for application from list of apps and open it I need to handle the scenarios differently, Can you pleas

  • Java Plugin Won't Run!!! HELP!!!!

    I installed 1.4 and it wouldn't run any of swing applets, so I uninstalled it, now I get Java Plug-in 1.4 Fatal Error Java Plug-in 1.3.1_01 cannot be located because values in the registry key HKEY_LOCAL_MACHINE/SOFTWARE/JavaSoft/Java Plug-in/1.3.1_0