Command option mouse click

Hi,
Since I upgraded to Lion I have the problem that I'm unable to use ccommand, option, shift and alt with mouse click.
Keyboard shortcuts still word, but the combination with the mouse doesn't work.
The strange thing is that at first it worked then suddenly anymore then it worked again and now since the last reboot it doesn't work anymore.
Does anyone have an idea what the cause is?
Regards

It's called New Tab Homepage and it's here:
https://addons.mozilla.org/en-US/firefox/addon/new-tab-homepage/
It's OK and fixed my problem with 90%. Before New Tab which I wanted to open in Background, was opening just after main Tab. Now New Tabs are opening in Background, but at the end...
But it's OK - like Safari.
Thanks man!

Similar Messages

  • I can't use option "Open in Background Tab". Before was Command+Left mouse click

    Hey,
    Here:
    http://support.mozilla.com/en-US/kb/Mouse%20shortcuts?s=Open+in+Background+Tab&as=s
    is shown that '''Command+left mouse click''' is opening in new tab in background.
    In Firefox 4 it doesn't work. Do you have any idea how to make it work?
    Thanks.

    It's called New Tab Homepage and it's here:
    https://addons.mozilla.org/en-US/firefox/addon/new-tab-homepage/
    It's OK and fixed my problem with 90%. Before New Tab which I wanted to open in Background, was opening just after main Tab. Now New Tabs are opening in Background, but at the end...
    But it's OK - like Safari.
    Thanks man!

  • Photoshop CS4 or 5 curves command-option-shift click

    Back in the day, if you did the combination of command-option-shift click while in the curves adjustment window, it would mark those points on all channels so you could then make adjustments to that one place. That seems to be gone. Is it? Is there a replacement? That click/drag curve point is not what I'm needing.

    Open Curves panel.
    Activate Targeted Adjustment Tool (the little finger thingy).
    Command-click on image places a point on the active curve.
    Shift-command-click places points on the all of the color channel curves.
    Cycle through channels:
    Option-2 for composite channel
    Option-3, 4, 5, 6 (if CMYK) for individual color channels.
    Takes a while to get used to, but it's the reality now. You'll get used to it.

  • How to remap Ctrl + Mouse click

    Hi, I searched but couldn't find an answer.
    My kid tore a handful of keys out of my PowerBook keyboard. I fixed most of them (to my surprise), apart from the Ctrl key which was torn out 'with meat', so to speak — it now wobbles and falls off every time I press it.
    How do I remap 'Ctrl + mouse click' to 'option + mouse click', for example? The list of keyboard shortcuts doesn't have this choice.
    I'll bring it to repairs later on... but I need my machine for a whole week of high profile presentations starting tomorrow. Couldn't be the worst time for this.
    Appreciate your help.

    Ah, thanks goodness — I took my keyboard apart and fixed the button. It's now just a bit raised over the rest of the keys but it's operation is back to normal.
    Sheesh — I was almost 'forced' to switch to MBP ahead of my plans!

  • Applescript help pt 2...Mouse Clicks & Click Lock?

    Hi all,
    Second challenge for me, it would be great to be able to use voice commands for mouse clicks. Most specifically I would like to be able to do a click-lock so that I can draw with a trackball and not have to hold down the button. It would be nice as well to be able to single and double click...
    I tried to figure it out based on the help I got in the last thread but could use a nudge in the right direction.
    Thanks!!!

    I suggest you take a look at this it has an example of the Systems Events 'click'
    I actually had seen this but it ties the click event to a specific button. When I tried to program just a click event w/o a button or target specified it did not seem to work.
    I would need something like "click current mouse position"....
    You should also re-think the click and hold idea. A click/hold/drag/release, is really just a select/copy/paste if done with menus.
    What I need to do click lock for is to control drawing in Adobe Illustrator. I need to be able to use alternative tools to the Wacom Pen, because no matter how good a tool is if you use it enough hours you will get hand fatigue. I want to be able to draw part of the time with a large trackball, and in order to make that work the mouse button has to be held down continuously while drawing.
    Message was edited by: V Silly

  • Terminal [ UNIX ] "mouse click" command question

    Can I emulate a left mouse click using a command in terminal? Or any freeware solutions available that would help?
    So what I wanna do is
    +open -a blabla filename+
    and then click on a specific area (like If I can tell the x,y co-ordinates to the command it would emulate the action and my application being on top would make the click)

    Let's say that myApp is the reference to your application and myItem is the item in which you want to click. Then you can do something like this
    osascript -e 'tell application "System Events" to tell myApp to click myItem at {x, y}'
    The 'at' part is optional and of course replace 'x' and 'y' with the numbers representing the x and y coordinates. For more information look at this [thread|http://forums.macosxhints.com/archive/index.php/t-36121.html]

  • My iPhoto images won't show, and Photo Library Repair will not open when I command-Option-click on the iPhoto icon.

    Some of my iPhoto albums will not show, as below:
    When I click on any of those individual albums, for a brief split second I can see the images displayed, but then they revert to this:
    Then if I click on any of those images, this image appears:
    I have real a lot of posts that say to click Command+Option while opening iPhoto and this will open the Photo Library Repair window, but... this is not happening. Each time I do it, iPhoto just opens as it normally does. I've tried about 10 times, closing iPhoto completely. I've tried through the dock icon and through the applications listing. Neither will open anything other than regular old iPhoto.
    Can anyone help me and suggest what I may be doing wrong, or are there any alternative was to open Photo Library Repair so I can rebuild my library? I really don't want to lose all of those photos, especially since some are really important and irreplaceable.
    Thanks.

    I have real a lot of posts that say to click Command+Option while opening iPhoto and this will open the Photo Library Repair window, but... this is not happening.
    Be sure you're holding the correct keys and that you're holding them long enough. Depress them before clicking on iPhoto and don't let go until the menu shows up.
    If you don't want to lose those photos, make a back up now. Hopefully it's not too late.

  • Need to go into photo library to retrieve photos that technical support lost at the store.  Told to do "command Option" at the same time - than click on "I-photo"  then check the box "repair the i-photo library.... I have had two appointment at the store

    How can i retrieve my photo library that got lost by your techs at the apple store?

    First to locate your library on the hard drive launch iPhoto with the Option key held down so you get this window:
    Your library should be displayed in the window and it's location displayed below the window when clicked on.
    If that fails to locate your library download and run Find Any File to search for a file named "ThumbJPGSegment.data" which is a file common to all versions of iPhoto libraries.
    FAF can search areas that Spotlight can't like invisible folders, system folders and packages. If there's a library hiding somewhere on your hard drive FAF will find it.
    Once you find the library you can try to repair if it doesn't open as it should by trying this:
    1 - launch iPhoto with the Command+Option keys held down to open the First Aid window.
    2 - Run Option #4, Rebuild Database.
    OT

  • Need a shortcut to "Allow pages to choose their own colors, instead of my selections above option preference" I know where it is and how to use it but I have to go through 7 mouse clicks to change it, then a few minutes later change it back. I also k

    Need a shortcut to "Allow pages to choose their own colors, instead of my selections above option preference" I know where it is and how to use it but I have to go through 7 mouse clicks to change it, then a few minutes later change it back. I also know the sequnce is alt t, alt o, alt c, alt a, then ok, ok. Got to be a way to make a one key short cut for this. I use a black background to reduce eye strain, but about 10% of the webpage I go to can't be send with black so I have to go into tools and hit 6 or 7 things to chnage it then after through with webpage have to do it all over at Not allow webpages to have own color. Very very cumbersome.
    == This happened ==
    A few times a week
    == made that way

    https://addons.mozilla.org/en-US/firefox/addon/toggledocumentcolors-198916/
    The above addon will solve your problem.
    Shortcut to toggle user color/page color :- Ctr+Shift+C

  • How do I fix error message "This document contains a link to an asset being upsampled. You should resize it smaller or right-mouse click on the asset in the Assets panel to see additional options." Which asset is it?

    I ab in Muse. How do I fix error message, This document contains a link to an asset being upsampled. You should resize it smaller or right-mouse click on the asset in the Assets panel to see additional options.

    You should ask in Help with using Adobe Muse CC
    This Cloud forum is not about using individual programs
    This Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes  doesn't accept my command and start clicking itself.what is the problem and how to fix it?

    The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes  doesn't accept my command and start clicking itself.what is the problem and how to fix it?

    If the mouse clicks something on its own then it looks like you have a hardware problem with the trackpad or possibly the battery that is right underneath the trackpad.
    I have read that the battery can swell and that would put pressure on the trackpad.

  • Use mouse click trigger option more than once?

    Hi, is there some way to use the "mouse click" trigger option more than once in the project? I am trying to build a menu button animate where the users click the (menu grid icon) once, and it transforms into the (x icon) and stays there until they click it again ONCE to change it back to the (menu grid icon). Other trigger actions aren't ideal, and I find that if I used the "double mouse click", the response gets a bit messy as clicking once would replay the whole sequence again. Thanks!

    At CreationComplete make a var as:
    button = -1;
    At click event of the button write:
    if (button == -1){
    sym.getSymbol("nmnmnmn").play("xicon");   // if you have a trigger in timeline to make this action that you want
    button++;
    else {
    sym.getSymbol("nmnmnmn").play("returnedicon");
    button = -1;
    Somehow like the above you'll have to do it.
    Or else you can use boolean , TRUE/FALSE

  • When I click on iPhoto icon I get a box that reads "The photo library needs to be upgraded to work with this version of iPhoto."  Whether I hit Quit or Upgrade the problem is not fixed.  Any suggestions?  Yes, I have tried Command Option iPhoto..no luck.

    When I click on iPhoto icon I get a box that reads "The photo library needs to be upgraded to work with this version of iPhoto."  Whether I hit Quit or Upgrade the problem is not fixed.  Any suggestions?  Yes, I have tried Command Option iPhoto..no luck.  I think I may have hit Upgrade the first time.  I really need this to be fixed ASAP.  Thanks for your help.

    Assuming iPhoto 09 or later:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • Command+option+click no longer works?

    Hi all.
    I have always used the combination command+option+click a lot to switch app and hide all others. Last week, this combination stopped working in a few apps, and now it doesn't work anywhere. Either my computer has forgotten a few things, or there's been some strange background update that I'm not aware of. Anyone else with this problem?

    Did you install anything last week?
    Have you tried it in another user account? That will isolate it to your user account problem or system-wide.
    Have you tried it in Safe Mode? That will isolate third-party software from interfering.
    http://support.apple.com/kb/HT1564

  • Why was command-option-click functionality removed.  Please bring back.

    Can anyone fill me in on this issue.
    I used to use command-option-click hundreds of times a day.  Cleared out all windows and got me to the application I wanted to use.  It is, apparently, gone in Mavericks.
    I'd be interested to know  why it was removed.  I also want it back.
    And, I'd llike it brought back with the functionality changes so that the application I make active with the command leaves the "hide" options in the Application pulldown menu active.  My one complaint about the shortcut was that it grayed out the "hide" options so I had to click out of the application and back in to use them.
    Please, please, I really want the shortcut!
    --Kenoli

    totally agree- the loss of 'pinch to resize' is a disaster.
    It was one of the main reasons i'd use it over powerpoint.
    C'mon Apple!
    rob

Maybe you are looking for