Command + s not consistant.

Sometimes when I press command + s in an edit screen, I get the web browser screen save, but most of the time I get the discussion saved to the forum ( equivalent to clicking to button at the bottom of the page).
Any ideas? Could it be cursor position?

If the browser's focus is in the text field, it'll save the message. To check, see if there's a blinking cursor or blue highlighted text in it.
(84857)

Similar Messages

Keyboard shortcut Command-~ DOES NOT WORK in/on some apps/machines

It seems that in Mac OS 10.6.2 the keyboard shortcut "Command-~" ( a.k.a.
"⌘-~" or "Command-tilde") is quite fickle. It is used in most apps to
switch between open windows within an application. It was available in OS
10.5 in Safari, Microsoft Office (including Entourage), and most other apps
with the capacity to open multiple windows simultaneously. But in OS 10.6.2
this shortcut is available in Safari on my 2.16 GHz Core2Duo 20" iMac but
NOT on my 2.4 GHz Core2Duo Unibody 13" MacBook; it's available in Entourage
on my MacBook but NOT on my iMac. So it's available on some apps and some
machines but not on others, there's no rhyme or reason to it, and it's not
consistent between like machines and apps, which makes me think that there's
a system-wide preference or command that could turn this on and off. I
thought perhaps it was controlled by a preference in certain apps, but I
have found no such prefs. Is there a way to control this - in other words,
to make it available where it currently is not? Or is there a command to
make it universally available on any 10.6 machine (my preferred solution)?
Thanks for any help offered.

Not a reply to this specific question, just a quasi-relevant comment that might help some folks.
In Leopard, and with (for example) English and Russian chosen in System Prefs under "Language" and the keyboard shortcut set to command+space, I would always see the flag change in the menu bar as soon as command+space were chosen. Now, under Snow Leopard, hitting command+space seems not to make the change. But it does make the change, you just need to take your fingers off the keys first, then the flag will change.

New tabs, automatic selection not consistent

Running Safari 4.0.1 on a 20" 2.16gHz iMac with OS X 10.5.7 with 4GB RAM.
Has anyone noticed this? My home page is Google (I don't like the Search box). When I Command-T to open a new tab, the auto selection is not consistent. If it is the first new tab that I open, the address bar is selected. For all subsequent tabs, the Google search box is selected. I would, of course, prefer that the Google search box is selected for all tabs. Why would Apple make this different depending on whether I'm opening tab #2 or tab #7? It should be consistent, first of all. In a perfect world, it would always select the Google search box first. Mouse-free browsing is the way to go.

You can find the New Tab button showing as a '+' on the Tab bar.<br />
You can open the Customize window and drag the New Tab button from the Tab bar on another toolbar and it will become a regular toolbar button like the New Tab button that you have in Firefox 3 versions.<br />
If you want the New Tab button at the far right end of the Tab bar then place a flexible to the left of it.
* New tab toolbar button: https://addons.mozilla.org/firefox/addon/new-tab-toolbar-button/
If you click the new window toolbar icon or use Firefox > Tab > Open New Window then you always open a new window.

After REFRESH the cached object is not consistent with the database table

After REFRESH, the cached object is not consistent with the database table. Why?
I created a JDBC connection with the Oracle database (HR schema) using JDeveloper(10.1.3) and then I created an offline database (HR schema)
in JDeveloper from the existing database tables (HR schema). Then I made some updates to the JOBS database table using SQL*Plus.
Then I returned to the JDeveloper tool and refreshed the HR connection. But I found no any changes made to the offline database table JOBS in
JDeveloper.
How to make the JDeveloper's offline tables to be synchronized with the underling database tables?

qkc,
Once you create an offline table, it's just a copy of a table definition as of the point in time you brought it in from the database. Refreshing the connection, as you describe it, just refreshes the database browser, and not any offline objects. If you want to syncrhnonize the offline table, right-click the offline table and choose "Generate or Reconcile Objects" to reconcile the object to the database. I just tried this in 10.1.3.3 (not the latest 10.1.3, I know), and it works properly.
John

My iphone 4s voice dictation for text messages is not consistently working. Sometimes it works, other times after the dictation it just gives me a blank space. Anyone else having this problem?

My iphone 4s voice dictiation for text messages is not consistently working. I've had the phone since Thanksgiving and it always worked perfectly, but the last few weeks it's been hit or miss. Sometimes it works, sometimes it doesn't. Anyone else having this problem? I tried the hard reset but that hasn't fixed it.

I have the same problem since updating to IOS 8.3. Any app to which I want to send a new link via IMessage does not allow me to select a contact to send the IMessage to. Using a pre-existing thread does not have same problem.

Airport Extreme Not Consistently Assigning DHCP

I am using a relatively new (within the last year) Airport Extreme as the primary router on my home network. Connected directly to the router is a GigE switch, an AT&T Microcell, and another router - an Aruba RAP which creates a secure VPN for my home/remote office network. The connection to my Apple desktop is made through the GigE switch, as are three additional wired connections to other devices in my home, including two Apple TV's and (hopefully) two Airport Expresses.
I recently discovered when trying to configure a new Airport Express to extend my wireless network over ethernet (roaiming network) that my Airport extreme is not consistently assigning the IP addresses within it's defined DHCP range (10.0.1.0 - 10.0.1.200). About half of the time devices on the network are getting a default 169.254.x.x IP address, which (in the case of my desktop) results in an 'self assigned IP' error within the network settings. I can reboot my apple desktop and the next time it gets a correct 10.0.1.1 address. Reboot again, it defaults back to a 169 address - and so on. It doesnt seem to make any difference if I connect my desktop directly to the Extreme, or, if I connect it through the GigE switch. And, every time I get a 'self assigned IP' I have no connectivity beyond the Extreme (no internet), and I'm forced to use my wireless/Airport connection.
Another problem here is that the Expresses both expect to receive 10.x IP addresses and when they don't get one, they basically become pretty $100 paperweights when connected over ethernet. Also, if you try to configure a new Express without the 10.x address it expects to be assigned (and defaults to a 169.x), the Airport Utility will no longer 'find' the Express once the Express auto-restarts and the update will fail. I learned this after spending two hours on the phone with Apple support yesterday - during which they were able to get my first generation Express configured, but, not my 24-hour old second Generation Express, which continues to act only as a paperweight. Oddly enough, everything works perfectly well if I use only wireless connections to the Extreme - there are no IP problems and everything works correctly. Unfortunately, I want to use wired connections for all my devices (expresses, Apple TV's) because we stream alot of audio and video.
Is my Extreme not working correctly? Does anyone think it's problematic to have a second router (the Aruba) connected behind the Extreme? I suppose I could force some components to use only specific IP's, but, that sounds like a pain. If the Aruba is problematic, I would also consider a second internet connection, or, finding some way to split home IP traffic vs work IP traffic.
Thoughts?

I've been doing some research and it appears the 'self assigned IP' address is a common problem in the Apple support community. And, for what it's worth, it appears an inability to isolate or accurately troubleshoot the problem - by users or Apple tech support - is a recurring theme. I totally understand that no two home networks are exactly alike (different ISPs, switches, configurations, etc.), but, after being a die-hard PC user for my entire life I can honestly say I never encountered anything like this while using my PC. I'm not about to trash my Mac, but, the Apple 'ease of use' selling point is quickly losing it's lustre.
I got into this mess because I added a GigE switch to my network. Rather than buy a different switch (a tactic which assumes my problems are being caused by the switch) I'm inclined to buy another Airport Extreme and try daisy-chaining them together to overcome the reason I bought the GigE switch in the first place, which is not enough ethernet ports on the Extreme. That, or I'll spend a weekend in my attic re-wiring my home network to daisy-chain my two Express devices together instead of requiring individual connections to my router. My experience with Apple hardware thus far is that it prefers to 'play nice' with other Apple hardware over non-Apple hardware. It could be $100 error on my end (or, a weekend of not doing yardwork), but, I think it's the best shot. Other possible fixes, including manually assigned IP-addresses, put too much emphasis on software and network configuration - which (by my non-scentific analysis), are two areas even harder to troubleshoot.
I'll let you know how it goes.
Mh
Post Script - Dear Apple: please find a way to significantly increase the number of ethernet ports on your Airport Extreme Router. Thank you.

GR/IR Clearing Account 2..... Not Consistent

SAP Experts,
I blocked GR/IR clearing account temporarely while I updated the open line item field. It turns out that after I finish running the program and unblocked the account. Receiving ca no longer receeive into teh account it says "G/L Accuont 2...... Not Consistent"
Does anyone knows what could possibly be?

I was able to go into IMG bring the field " Only Balances in Local Currency" then went into account brought it to a "ZERO Balance" with TCODE FB50. Went into FS00 and updated field. Then reversed entry, and it works fine.

Host command is not working on linux

Hi
I m using linux for application server n windows for client. I need to create folder from client machine by cliking a button of forms10g runtime.HOST command is not working which was working fine in windows.
Any help is appriciateable.
kazi mokarem

Hi
I had the same issue on linux a few weeks back. What tuned out was, when you install the Oracle app svr it does not include the system paths by default.
The path where mkdir is located may not be visible to the app.
Try to hardcode the path for mkdir as /bin/mkdir .... and seee if that works.
If the above statement works then add that path in the paths variable in default.env file located in $ORACLE_HOME/forms/server directory
HTH
Arvind

My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

I'm afraid you'll have to get the phone serviced, dropping the phone must have damaged additional parts inside the phone.
But Apple will not service the phone anymore, opening the phone and replacing the battery should only be done by authorized personal, not by users.
You'll have to look for a 3rd party repair shop and see if they can fix this, sorry.

Read from sql task and send to data flow task - [OLE DB Source [1]] Error: A rowset based on the SQL command was not returned by the OLE DB provider.

I have created a execut sql task -
In that, i have a created a 'empidvar' variable of string type and put sqlstatement = 'select distinct empid from emp'
Resultset=resultname=0 and variablename=empidvar
I have added data flow task of ole db type and I put this sql statement under sql command - exec emp_sp @empidvar=?
I am getting an error.
[OLE DB Source [1]] Error: A rowset based on the SQL command was not returned by the OLE DB provider.
[SSIS.Pipeline] Error: component "OLE DB Source" (1) failed the pre-execute phase and returned error code 0xC02092B4.

shouldnt setting be Result
Set=Full Resultset as your query returns a resultset? also i think variable to be mapped should be of object type.
Then for data flow task also you need to put it inside a ForEachLoop based on ADO.NET recordset and map your earlier variable inside it so as to iterate for every value the sql task returns.
Also if using SP in oledb source make sure you read this
http://consultingblogs.emc.com/jamiethomson/archive/2006/12/20/SSIS_3A00_-Using-stored-procedures-inside-an-OLE-DB-Source-component.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

A rowset based on the SQL command was not returned by the OLE DB provider.

Hi
I am calling a stored procedure using ssis.
i am creating a work table--temp in the procedure and using that to join and select columns from other tables.
i am gettig the error
[Positions [22612]] Error: A rowset based on the SQL command was not returned by the OLE DB provider.
please help

SET NOCOUNT ON
in the stored procedure and try again.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Error while deploying : DCM command did not complete successfully (-8)

Hi Friends:
I am getting error while deploying the application on Oracle Portal AS. Following are the version details:
Portal 10.1.4 ; Portal AS 10.1.2.0.2 ; JDK 1.5.x ; Jdeveloper 10.1.3.3.0
I am able to deploy same on my Standalone OC4J Server.
Portal Server connection is Successful. Application i am trying to deploy is simple JSF application.
The deployment log is as follow:
---- Deployment started. ---- Aug 21, 2008 10:10:26 AM
Target platform is Oracle Application Server 10g 10.1.2 (Windows) (PortalASConnection1).
Wrote WAR file to C:\Jdeveloper\jdev\mywork\MyApplication\ViewController\deploy\myApp1.war
Wrote EAR file to C:\Jdeveloper\jdev\mywork\MyApplication\ViewController\deploy\myApp1.ear
Invoking DCM servlet client...
C:\Jdeveloper\jdk\jre\bin\javaw.exe -Djava.protocol.handler.pkgs=HTTPClient -jar C:\Jdeveloper\jdev\lib\oc4j_remote_deploy.jar http://01HW180457:18102/Oc4jDcmServletAPI/ ias_admin **** redeploy D:\OraHome_3 C:\Jdeveloper\jdev\mywork\MyApplication\ViewController\deploy\myApp1.ear myApp1
Initializing log
Servlet interface for OC4J DCM commands
Command timeout defined at 600 seconds
Executing DCM command...
Executing command redeploy D:\OraHome_3 C:\Jdeveloper\jdev\mywork\MyApplication\ViewController\deploy\myApp1.ear myApp1 UNDEFINED
Command = REDEPLOY
Reading application's ear file
Ear file was successfully read
Opening connection to Oc4jDcmServlet
Setting userName to ias_admin
Sending command to DCM servlet
HTTP response code = 200, HTTP response msg = OK
Command was successfully sent to Oc4jDcmServlet
Receiving session id from servlet to check command status
Session id = ac11c08f46b696f8630ce3484fda975697914ab9c18a
Please, wait for command to finish...
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=ac11c08f46b696f8630ce3484fda975697914ab9c18a
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has finished
Receiving command exit value
Receiving command output
**** No output was received from command
Closing connection to Oc4jDcmServlet
#### DCM command did not complete successfully (-8)
#### HTTP return code was -8
Exit status of DCM servlet client: -8
Elapsed time for deployment: 14 seconds
#### Deployment incomplete. #### Aug 21, 2008 10:10:39 AM
I will appriciate to hear from you.
Have A Nice Time!
Regards,
Kevin

Refer Note:373056.1 on MetaLink.
Thanks
Shail

Business partner of organizational unit is not consistent

Hi,
Client is on SRM 4.0. When we are trying to search a user in the org structure, and when clicking on "Check" for this user, it was showing fine. But when we are searching any BP in the org strucutre, then immediately the BP name is vanishing against the BP of the user and when doing the "Check" it is showing the below two messages:
Business Partner of organizational unit XXXXXXX is not consistent
User cannot be repaired becasue the organizational unit contains errors
When checking in BBP_CHECK_USRES, the user is not showing as defective. It is green.
Similarly, the the organizational unit check is also showing as green.
System is advising to run BBP_BP_OM_INTEGRATE. When we run this for the org units, these are coming as green.
Users are able to create the shopping carts and also are able to create confirmations. But the problem is happening for some of the users where the system is not allowing to create shopping basket / confirmation.
Strange thing is that, when we are searching the user by user id in the org structure, then the check is showing no messages. But if we search the same user using the BP number, then in the check, the messages are coming. And once the messages appear, it is appearing for all the users in the org strucutre even at the root node level.
Any help is highly appreciated.
Thanks & Regards,
Aswini

Hi Aswini,
There are some possibilities to raise these kind of errors messages:
1) User with inconsistent data.
Please, check the instructions described in the following notes:
597475 - Repair users with inconsistent address data
-> use the report B_REPAIR_EBP_USER_2 to make the user consistent.
419423 - Repairing incorrect EBP users
350129 - Creating business partner for organizational unit
When you create the Org Units have you fully completed the address
data, e.g post coe, telephone/fax number etc..
If not, please enter a full address, save the data and see if this
generates the Business Partner.
Remember, that you can delete this user and create a new user.
2) Error in the positions after HR replication
Please, implement the following notes and retest the scenario:
1056873 - Incorrect SRM users after HR distribution
1016450 - Replication of persons deletes positions in SRM
After implementing these notes you should send the employee
corresponsing to the user in error with his position (using
transaction PFAL or report RHALEINI in UPDATE mode for all periods.
3) the user was deleted and a new was created and during these two
actions the user opened documents. So, in this case, the new user
becomes inconsistent
If the user is deleted from SU01 still the BP and S which is related to
that user will be retained (we can see this in PPOMA_BBP) transaction.
In this case we can create the user again using SU01 and can be attached
with the old 'S' and 'BP'.
2. If the user is completed deleted ie., all relations BP and S.
The new user has created.
In this case if the new user is corrupted we can delete this
user (since the new user doesn't create any documents so far). But the
old documents should refer to the new BP related to the new user.
========================
Also, another option would be to follow the below instructions
After applying the notes 1056873 & 1016450, send the employees
corresponding to the users in errors with their positions (using
transaction PFAL or report RHALEINI in UPDATE mode for all periods,
using evaluation path A008) ? If not, please do this and it must repair
the SRM users. Please test and give me the feedback.
Hope this helps,
Kind Regards,
Matthew

GL Account not consistent

Hi
When we are processing MIGO for a PO we are getting error message GL ac so and so in not consistent and if I double click on that message below detial message is getting displayed:
This line item carries the "W" posting line identification. The master record for GL Account 2150000 in company code 1000 must have the "balance only in local currency " indicator if the W identifier is set.
What is "W" posting line identification. Please let me know the solution for this issue
Regards
Padma.

Hi,
As this error is pertaining to GL master check this account under FS00 and tick "only balance in local currency" as it is your GR/IR clearing account which should be managed as open item basis.
Moreover, also make sure field status to this GL (for line item) and of account group (obd4) are in sync.
In OBYC, you have assigned this account under your wrx i.e. GR/IR clearing.
Hope above will help you.
Regards,
Valay Pandya

External command is not working in File Receiver Adapter

Hi,
   I have tried to copy the file which is mentioned in my File Adapter (Receiver) to 3 different folders thru OS command. The purpose is to save time. I have created one CC for Source(File) and one CC for target(File). After the target file is created, I want to copy this file in 3 folders. For this I have written one batch file in my system.
File Name: copy1.bat
@ECHO OFF
COPY %1 C:\TEST1\arch_t1
COPY %1 C:\TEST2\arch_t2
COPY %1 C:\TEST3\arch_t3
DEL %1
The command which I entered in the Receiver CC (File Adatper is)
Run Operating System Command After Message Processing
Command Line: C:\FILES\copy1.bat %F %f
Timeout(secs): 60
Terminate Program After Timeout - Check box is selected.
But, this external command is not working. (because the target files are not created in those directories C:\TEST1, C:\TEST2, C:\TEST3)
   I did this scenario by refering the Michael'w weblog:
/people/michal.krawczyk2/blog/2007/02/08/xipi-command-line-sample-functions
   In this blog, he has also given how to troubleshoot external command. I tried this also. It is not working.
    I use Windows XP OS. XI 3.0 SP 18.
   Friends, Could you kindly tell why this external command is not working? What could be the problem?
Thanks in advance.
Kind Regards,
Jeg P.

Hi, Jeg.
As the note says, please check the java Runtime.exec behavior
with the proper user.
If in doubt, check if the command can be successfully run through
the Java Runtime.exec(...) API. Also note that the command is run
as user "<sid>adm" (Unix) / "SAPService<SID>" (Windows).
So, Could you check the following(very dirty one!) Java in your
XI server and check if it works? For simulating %F, create a test
file C:\FILES\test.txt whatever the content is.
import java.util.*;
import java.io.*;
public class ExecJava {
public static void main(String args[]) {
    try {
      Runtime rt = Runtime.getRuntime();
      Process proc = rt.exec("C:/FILES/copy1.bat C:
FILES
test.txt");
    } catch (Exception e) {
      e.printStackTrace();
Good Luck.
Sejoon

Command + s not consistant.

Similar Messages

Maybe you are looking for