Command tnsping not found

Hi,
I have installed three packages to use oracle client (basic, sqlplus & sdk additionnal) on a Ubuntu Server 10.04.3.
I used the software Alien on Ubuntu to convert .RPM to .DEB.
And i can't find the command TNSPING in /usr/lib/oracle/11.2/client/bin.
I have to install another package ?
For information, sqlplus works on my computer without problem.
Thanks for your help.
orygynz

909659 wrote:
Hi,
I have installed three packages to use oracle client (basic, sqlplus & sdk additionnal) on a Ubuntu Server 10.04.3.
I used the software Alien on Ubuntu to convert .RPM to .DEB.
And i can't find the command TNSPING in /usr/lib/oracle/11.2/client/bin.
I have to install another package ?
For information, sqlplus works on my computer without problem.
Thanks for your help.
orygynz
env |grep ORA|sort
ls -l $ORACLE_HOME
which tnspingcopy the above commands and paste them into a command line when logged on as the oracle software owner
copy entire terminal session (commands and results) and paste back here.

Similar Messages

Appletviewer command is not found (URGENT)

hi
I am using Fedora Core 4, When i installed FC 4, I have installed all, so it has installed java in /usr/java/jdk1.5.0_04 also. After that i have installed sun jre in /opt/jre1.5.0_06. also i have installed jdk1.5.0_06 in /usr/local
but swing and applets are not working.
After that i have started to compile Applet program, but appletviewer is not found. so i went to /usr/local/jdk1.5.0_06/binappletviewer command is not found (URGENT) and tried to compile appletviewer but it has given me the following errors, please help me what should i do? I guess i have to set CLASS PATH. but how and where?
If i am in /usr/local/jdk1.5.0_06/bin. then Applet is poped up but not initialized,
[nirlep@nirlep bin]$ appletviewer /home/np/java_prog/java_for_linux/applet/Hello.html
Warning: Can't read AppletViewer properties file: /home/nirlep/.hotjava/properties Using defaults.
load: Hello.class is not public or has no public constructor.
java.lang.IllegalAccessException: Class sun.applet.AppletPanel can not access a member of class Hello with modifiers "public"
at sun.reflect.Reflection.ensureMemberAccess(Reflection.java:65)
at java.lang.Class.newInstance0(Class.java:344)
at java.lang.Class.newInstance(Class.java:303)
at sun.applet.AppletPanel.createApplet(AppletPanel.java:721)
at sun.applet.AppletPanel.runLoader(AppletPanel.java:650)
at sun.applet.AppletPanel.run(AppletPanel.java:324)
at java.lang.Thread.run(Thread.java:595)
[nirlep@nirlep bin]$
If i run appletviewer in my /home/np/java_prog/applet/ then appletviewer
command is not found.
require urgent help.
thanks.

Oh dang, it's urgent. I must be too late to answer... too bad.

Cmd command "Tasklist" not found.

I'm running Windows 8.1 and I've been having issues playing League of Legends, so I sent a support ticket to Riot Games, and they told me a list of information that I needed to retrieve to help them identify the problem. One of the steps they asked me
to complete was send them a process list through the cmd command tasklist /v > "%USERPROFILE%\desktop\Process.txt"
I pasted the command to the cmd and it came up with an error message reading "Error: Not Found" I ran the cmd in admin mode after this to see if that would work but to no avail. Is there a way to fix this error, or is there another way to
compile a process list? Any help would be appreciated.

Not sure why this is not working.
As a work around, You can grab the list of processes using process explorer.
http://technet.microsoft.com/en-au/sysinternals/bb896653.aspx
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Following Beginner's Guide, but one command is "not found" - alsact1

Hello
I'm following the Beginner's guide and doing everything exactly as it says. However, when i get to the Sound Card setup instructions (using ALSA) one of the commands it is telling me to use returns the error "-bash: alsact1: command not found"
I have done everything exactly as per the directions. According to the instructions, this command saves the mixer settings so that on boot-up, the volume levels are as they were previously.
I wasn't able to create the file that "alsact1" is supposed to create, but upon boot-up, the sound levels appear to be as they were last time. so everything works just fine.
Should I just forget about the "alsact1" command and move on? Anyone else have this issue? Is there a fix? or is it a typo in the instructions?
Thanks in advance!

The last letter is an L, not a 1
ie ALSACTL rather than ALSACT1

Command not found error

I'm trying to run this command in my terminal:
sudo ./cloudera-manager-installer.bin
however, it is saying that such a command is not found... I've tried also inputting the actual path to the object as such:
sudo ./cloudera-manager-installer.bin
and have gotten the same error messsage. Any feedback would be greatly appreciated!

The second command is the same as the first. It will work only if there is an executable named "cloudera-manager-installer.bin" in the current directory. If there isn't, change to the directory or use the full path.

VM Tools install fails: "command not found"

Hi guys,
I'm running a Linux Mint guest on Win7 x32 using VMWare Player 6.0.5. It's basically going well, but I'm unable to install Tools. I open a terminal in the directory of the extracted files, then run the command under SUDO, but the command is not found. I'm attaching a shot of the command line and the target directory.
I re-extracted the Tools package, which is why the folder has " (2) appended to it, but that made no difference. Any help would be appreciated.
Paul

Please put your script between "code" format delimiters.
http://wiki.oracle.com/page/Oracle+Discussion+Forums+FAQ
You can add the line "set -x" at the beginning of your script to see at which line it fails? I suspect the . ./env line.

HT201442 i have tried the above resolution,but it says command not found.Can someone help with another resolution? Thanks

I have tried the above resolution and it said that the command was not found. Please help

Why not ask in the appropriate Mac forum as the command in the article is run on a Mac.

WINE Command not Found

I installed WINE 0.9.45 from source without any errors. I can go to /usr/local/bin via Konqueror and execute the shell scripts that are there and everything works perfectly. I can even run Windows applications through winefile.
However, when I try to do anything with WINE through the console, it says the "wine" command does not exist. If I type "man wine" it once again can not find it. The WINE install worked perfectly, and I can run WINE by going to its directory with Konqueror, so any ideas why the wine command is not found?

Protip: if you want to compile wine yourself run configure with --prefix=/home/you/(utilities/)wine45, because it produces a LOT of programs/scripts. This way you also don't need root.
And add $HOME/wine45/bin to your $PATH.
When the next version comes out you can install it to a new directory and delete the old one without having to worry about general package management issues.

[SOLVED] Command Not Found

I feel like this is some stupid error I am overlooking, but after searching I cannot figure out why the command is not found.
$ dmenu-with-yeganesh
zsh: command not found: dmenu-with-yeganesh
$ echo $PATH
/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/bin/core_perl:~/.xmonad/bin
$ ls -Alh ~/.xmonad/bin
total 4.0K
-rwxr-xr-x 1 name name 268 Jun 20 13:24 dmenu-with-yeganesh
Last edited by chetjan (2014-06-20 21:04:45)

The "~/.xmonad/bin" part in the $PATH is wrong. It should have been expanded to /home/$USER/.xmonad/bin; probably because you quoted the tilda in your .zshrc.

HT4103 my sudo command is not working

Hello, when i type sudo it show bellow message
Arifur-Rahmans-MacBook-Pro:~ arif$ sudo
-bash: sudo: command not found
when i type ls
Arifur-Rahmans-MacBook-Pro:~ arif$ ls
-bash: ls: command not found
Please help me i am not able to work anythings.

When I said type
echo $PATH
I did mean PATH in ALL CAPITALS. When working on the Unix side of Mac OS X, as weill all Unix systems upper and lower case do matter.
But from the error message, I can see that somewhere along the way, mongodb (a database package), and the modification of PATH was done incorrectly.
If you installed MongoDB, AND if the instructions had to modify your .profile (or perhaps .bash_profile), then either their instructions were wrong, or you missed a step, which explains why you can not enter commands are not found
PATH is a Unix environment variable that contains a colon separate list of directories where the shell will look for commands when you enter them at the command prompt.
So your choices are delete the offending .profile (or perhaps .bash_profile) and forget about MongoDB, or if you do need MongoDB, then fix your .profile (or .bash_profile) so it has a properly formed PATH environment variable.
Fixing this would look like
/bin/ls -a # this will show you all the files starting with a period (dot) as in .profile or .bash_profile
/usr/bin/nano .profile
now in this text editor use the arrow keys, and the delete key to find and delete offending text, then type in the corrected text. Nano gives you a menu at the botton of the editor with additional commands. ^O (Control-O) writes out any changes you made. ^X (Control-X) exits from Nano.
You want your PATH variable to look like (REMEMBER UPPER/lowercase is IMPORTANT) ALSO spaces or nospaces are important.
export PATH="/usr/local/mongodb-osx-x86_64-1.8.2:$PATH"
NOTICE there is a colon between the MongoDB directory path, and the $PATH. The $PATH will append your existing PATH to the end of the new PATH environment variable you are setting up. The entire PATH string is enclosed in double quotes. ALSO NOTICE, there is only 1 space between export and PATH. No spaces anywhere else in the line.
Again, I used .profile as the most likely file name, HOWEVER, your shell will look for 1 of 3 different initialization files starting with
.bash_profile
.bash_login
.profile
If will use the first file it finds in the above order and stop looking as soon as it finds a match. So it is important that you edit the correct file. The
/bin/ls -a
command will tell you want leading period filenames exist in your home directory
I'll also give you one word of caution. When playing on the Unix side of Mac OS X, and following instructions you do not understand, it is generally wise to have a very recent full backup of your system. There are some commands that can make your system unusable should you enter them blindly.
Message was edited by: BobHarris

Java Class Def Not Found Error

Hi,
When I run a java program(us_noti.sh) I get the following error
======ERROR=========
us_noti.sh
Exception in thread "main" java.lang.NoClassDefFoundError:
org/acplt/oncrpc/XdrAble
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:509)
at
java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123
at
java.net.URLClassLoader.defineClass(URLClassLoader.java:246)
at java.net.URLClassLoader.access$100(URLClassLoader.java:54)
at java.net.URLClassLoader$1.run(URLClassLoader.java:193)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:186)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at
sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:265)
at java.lang.ClassLoader.loadClass(ClassLoader.java:262)
at
java.lang.ClassLoader.loadClassInternal(ClassLoader.java:322)======END OF ERROR=========
Any idea what needs to be included in the CLASSPATh for resolving this error. I am running the program on Solaris 2.8
Java Version is as follows
hostname] java -version
java version "1.4.0_03"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.0_03-b04)
Java HotSpot(TM) Client VM (build 1.4.0_03-b04, mixed mode)
Would appreciate any help on this problem..Have been stuck with this for a few days :-((
TIA
Femy

That means u need to have the class or jar files corresponding to
org/acplt/oncrpc/XdrAble
in your jre. giving CLASSPATH helps only for sdk compilation. and with newer versions of jre, even the /bin/jre command is not found. so it is not clear how to install new class or jar files with jre. let sombody who knows enligthen on this
bala

Camera raw file not found

I have adobe photoshop cs6 on mac os 10.6.8. I recently tried to upgrade my camera raw plugin and now when going to about plugin camera raw it pops a window open saying could not complete camera raw command file not found. Please help for i have no idea whats going on.

Yes that does seem to be my first issue. But now i think I might have to many plug-ins duplicated or downloaded causing it to crash. It is still is giving me the same response. It says "Could not complete your request because Photoshop does not recognize this type of file,'' when trying to open any cr2 or jpeg. When I click on; about plug-in, camera raw, its says "Could not complete the Camera Raw command because the file was not found," does this mean the file is misplaced or might i have too many duplicate plug-ins in the same location causing confusion. I just don't know where the plug-ins need to be nor where they're located to even fix the issue. Also if it matters my bridge appears to be Bridge CC and its working with Photoshop CS6. So if any one knows of how to resolve this issue of lost camera raw plug-in please fill me in.

Compiling package Not found

Hi All,
I have windows XP. I have java files in following 3 directories that I want to compile.
C:\spring\commands\*.java
C:\spring\controller\*.java
c:\spring\service\*.java
I went in to command directory and run javac *.java --- all java files successful compile
I went to service directory and run javac -d *.java It keeps complaining
AuthenticationService.java:9: package spring.commands does no exist
import springexample.commands.LoginCommand; not found
On the contrary AuthenticationService.class is present in the commands directory. Then why it complains and what is the solution ?
thanks
pp

Assuming all classes' source code starts with one of the following: package spring.commands; package spring.controller; package spring.service (and in the associated directory).javac -claspath c: spring\commands\*.java spring\controller\*.java spring\service\*.javaThe classpath must contain the root directory for the package, in this case c: not the package directories themselves. So the path to the .class file is classpath_directory + package_directory(s).
I am not sure that c: will be interpreted as a valid directory - you may need to use c:\ or you may need to put the .java files in a better directory such as c:\myjava.

Command not found error while executing a shell script

Hello,
I am a newbie to linux.I am attaching the code which gives me following errors..
error list:
1. no such file or directory enviornemnt
2. command not found
3. ambiguous redirectline
Script
cd $HOME/wkdir
rm /tmp/*.log
# source environment
. ./env
# Run the install script to setup the database
# Configure SH account
sqlplus "/ as sysdba" <<! > /tmp/perflab_install.log 2>&1
grant connect, resource, dba to SH;
alter user sh account unlock;
# create the fetch_n_rows procedure
sqlplus "$PERFLAB_USER" <<! >> /tmp/perflab_install.log 2>&1
drop index sales_time_bix;
drop index sales_time_idx;
create index sales_time_idx on sales(time_id) compute statistics;
-- fetch_n_rows: fetches 'n' rows from the specified statement --
CREATE OR REPLACE PROCEDURE fetch_n_rows(
stmt VARCHAR,
name VARCHAR,
nexec NUMBER := 1,
nrows NUMBER := 0,
debug BOOLEAN := FALSE)
IS
-- Local variables
curs INTEGER := null;
rc INTEGER;
nexec_it INTEGER := 0;
nrows_it INTEGER;
BEGIN
dbms_application_info.set_module('DEMO', name);
WHILE (nexec_it < nexec)
LOOP
curs := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE(curs, stmt, DBMS_SQL.NATIVE);
rc := DBMS_SQL.EXECUTE(curs);
nrows_it := 0;
LOOP
IF (dbms_sql.fetch_rows(curs) <= 0 OR (nrows <> 0 AND nrows_it = nrows
THEN
EXIT;
ELSE IF (debug = TRUE)
THEN
DBMS_OUTPUT.PUT_LINE(nrows_it);
END IF;
END IF;
nrows_it := nrows_it + 1;
END LOOP;
DBMS_SQL.CLOSE_CURSOR(curs);
nexec_it := nexec_it + 1;
END LOOP;
dbms_application_info.set_module(null, null);
END fetch_n_rows;
show errors
# Start the workload
. ./start_workload.sh > /tmp/setup_perflab.log 2>&1
# Wait two minutes for workload to get going
sleep 120
# Modify snapshot interval
sqlplus -s /NOLOG <<EOF >> /tmp/setup_perflab.log 2>&1
connect / as sysdba
set head on
set feedback on;
set pagesize 40
rem -- event to allow setting very short Flushing interval
alter session set events '13508 trace name context forever, level 1';
rem -- change INTERVAL setting to 2 minutes
rem -- change RETENTION setting to 6 hours (total of 180 snapshots)
execute dbms_workload_repository.modify_snapshot_settings(interval => 2,-
retention => 360);
EOF
Note : start_workload.sh is also in the same directory..
Any help would be greatly appreciated.

Please put your script between "code" format delimiters.
http://wiki.oracle.com/page/Oracle+Discussion+Forums+FAQ
You can add the line "set -x" at the beginning of your script to see at which line it fails? I suspect the . ./env line.

Shell Commands not found error when running application

Hello,
Im using MonoDevelop IDE in my Mac, before it used to work fine but after few days, now when I'm opening the application nothing happens., i checked the Console for the log and it says this
May 9 21:29:39 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x52052].com.ximian.monodevelop[1510]: /Applications/MonoDevelop.app/Contents/MacOS/monodevelop: line 17: dirname: command not found
May 9 21:29:39 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x52052].com.ximian.monodevelop[1510]: /Applications/MonoDevelop.app/Contents/MacOS/monodevelop: line 31: //mono-version-check: No such file or directory
May 9 21:29:39 Sri-Vishnu-Totakuras-MacBook-Pro com.apple.launchd.peruser.501[599] ([0x0-0x52052].com.ximian.monodevelop[1510]): Exited with code: 1
I thought may be some error with the "dirname" command, so i commented it in the code and gave the path of directory myself and then the console shows up like this.
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 19: grep: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 19: cut: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 20: cut: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 21: cut: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 22: cut: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 31: osascript: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: Cannot launch MonoDevelop
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: MonoDevelop requires the Mono Framework version 2.10.4 or later.
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro com.apple.launchd.peruser.501[599] ([0x0-0x56056].com.ximian.monodevelop[1532]): Exited with code: 1
I opened the contents of the application and run the shell script for opening aplication there it worked very fine and application started working.. But if i open application directly through launchpad or finder it doesnt show up and console
I tried running those commands in the terminal directly there they work.. But dunno whats wrong in here. and even if try to open the application through the terminal it all opens fine.. what could be the possible problem, is it with my mac..?

i finally figured out the problem.. it is with the environmental variables. the path for all those commands like "grep" is not being set for the GUI applications. that is why i got that error.
for those GUI applications which require path, we have to set path in the file /etc/launchd.conf the environmental variables set in here are used by the gui applications and those which are launched through spotlight.
that file may bot be present in most of the macs. No problem even if not present,we can create one and use.
so type in terminal
$ sudo vi /etc/launchd.conf
and in the editor add these lines
setenv PATH = /new/path
and save. Note: replace /new/path with the path which you need to have for the commands used in the script.
remeber that you need to restart your mac for applications to use these environmental variables.

Command tnsping not found

Similar Messages

Maybe you are looking for