Command to compute the CPu utilisation of a process and its respective chil

Hi All,
what the command equivalent of "sar -X" of linux on solaris ? need this for performance testing .
appreciate if you respond AQAP .
Warm Regards ,
Chakravarthy

I don't know what 'sar -X' does on linux. Can you describe the behavior you want?
I see CPU utililization in the subject. Perhaps you're looking for something like 'prstat' or more likely system accounting.
Darren

Similar Messages

HT4060 My iPad wont charge when plugged into a computer, the battery isn't lasting long, and its getting hot when charging

My iPad wont charge when plugged into a computer, the battery isn't lasting long, and its getting hot when charging

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Need to retrieve all the UDAs associated to a member and its respective children in Excel

Dear Experts,
I'm working on Essbase version 11.1.2.1.106 and Hyperion smart view 11.1.2.1. There is a custom dimension in the outline and UDAs are assigned to all the members of that custom dimension.
Now the requirement is to retrieve all the UDAs of a particular member and its respective children in Excel. Please let me know if there is any option to fulfill the requirement.
Let say there is a member A and it has 10 childrens(A1-A10). All these members have UDAs assigned to them. Now i would like to retrieve/adhoc analysis all these members as well as its associated UDA in Excel. How can we do that using smart view.
All your inputs are appreciated.
Thanks in Advance

Sree,
If one does as you suggest, the individual UDAs can be viewed in the member selector dialog box and then members (not the UDAs) can be selected based on that.
That is not, I think, what the OP wants:
>>Now the requirement is to retrieve all the UDAs of a particular member and its respective children in Excel.
Your approach doesn't provide the above.
People have thought about using MDX to get the UDAs (and maybe someone really good with MDX metadata queries might come up with this), but that doesn't seem to be the case:
Retrieving all Uda using Mdx Query-what should be string_value_expression?
The API or Applied OLAP's new and improved Outline Extractor would seem to be the way to go. Or of course you could export out the outline using MaxL and then parse the XML.
Regards,
Cameron Lackpour

I start the computer the screen has blue vertical stripes and says that the Adobe Air application can not be found. Some of my programs don't run and say: You: Error access violation at 0x0055F525

I start the computer the screen has blue vertical stripes and says that the Adobe Air application can not be found. Some of my programs don't run and say:
You: Error access violation at 0x0055F525. I reinstalled Adobe Air. No change. I went to the Adobe webside and they said to repair it with a program. I bought RegCure. Didn't change anything. What to do?

Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time.

HT2311 After waiting 27 minutes while the new iTunes supposedly downloaded onto my computer, the Finder window did not appear, and the iTunes.mpkg icon didn't appear on my desktop (where downloads usually go). What do I do?

After waiting 27 minutes while the new iTunes supposedly downloaded onto my computer, the Finder window did not appear, and the iTunes.mpkg icon didn't appear on my desktop (where downloads usually go). I also looked for the new iTunes by clicking on my Hard Drive icon but didn't see it there either. I only see the icon for the old iTunes. What do I do?

The exclamation mark means that the app has lost the link to the actual file.
First step: try and make sure the iPhoto Library is working correctly:
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

HT201302 When i open up itunes on my computer, it says that i have 2 videos but when i sync it and check my ipod touch, it says i have no videos so it only shows up on my computer but not on my iPod touch and its a 4th Generation.

When i open up itunes on my computer, it says that i have 2 videos but when i sync it and check my ipod touch, it says i have no videos so it only shows up on my computer but not on my iPod touch and its a 4th Generation.

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem

I forgot the code to the lock screen to my phone and its telling me to connect to itunes....what do I do?

I forgot the code to the lock screen to my phone and its telling me to connect to itunes....what do I do?

You need to connect the phone to your computer's iTunes, and that should recognise the phone and let you reset it back to factory defaults - you can then restore/resync your content to it.
Disabled device : iOS: Forgot passcode or device disabled

My Ipod is showing the loading sign while turning off and its frozen there.

My Ipod is showing the loading sign while turning off and its frozen there. My computer wont reconize it either. My Safari didnt work so I thought that I will turn it off to see if its working after and it just gotb stuck in the loaeding sign while turning off.

Try here:
iOS: Not responding or does not turn on

My ipod touch 4g keeps flashing the apple sign on the screen what should i do and its warranty is over to

My ipod touch 4g keeps flashing the apple sign on the screen what should i do and its warranty is over to

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. The appointment is free.
Apple Retail Store - Genius Bar

Question about the rescheduling of a Sales Order and its Production Order

Hello Everybody,
I experience something strange with the rescheduling of a Sales Order and its corresponding Production Order.
It will be easier to explain with an example...
For a material, I have created a Sales Order.
And from this Sales Order, I have now a Production Order converted from a Planned Order generated by the MRP Run.
This is what I have in transaction MD04:
SALES ORDER
AV DATE: 20/02/2008
GR DATE: 20/02/2008
PRODUCTION ORDER
AV DATE: 20/02/2008
GR DATE: 18/02/2008 (GR process time is 2 days).
==> OK !
Now, I have to reschedule the Sales Order one week sooner.
SALES ORDER
AV DATE: 13/02/2008
GR DATE: 13/02/2008
After transaction COHV to reschedule the Production Order, I have:
PRODUCTION ORDER
AV DATE: 15/02/2008
GR DATE: 13/02/2008
But I expected to have:
PRODUCTION ORDER
AV DATE: 13/02/2008
GR DATE: 11/02/2008
Do you have an idea about what is wrong?
Thanks in advance for your help on this subject.
Regards,
Rudy

Hello.
Thank you for your reply.
But in fact, I am doing some tests on a test platform, which is using an "old" copy of production database.
So, there can't be data already scheduled for the dates I am using.
Moreover, I just tried now to do the same with dates in November 2008, exactly with the same results.
In production platform, they experience this problem too.
Summary of my new test:
Before rescheduling:
SALES ORDER:
AV. DATE = 20/11/2008
GR. DATE = 20/11/2008
PROD. ORDER:
AV. DATE = 20/11/2008
GR. DATE = 18/11/2008
After rescheduling of one week sooner:
SALES ORDER:
AV. DATE = 13/11/2008
GR. DATE = 13/11/2008
PROD. ORDER:
AV. DATE = 15/11/2008 (ipo 13/11/2008)
GR. DATE = 13/11/2008 (ipo 11/11/2008)
I really don't understand why I don't have the same kind of dates as the ones I get before the rescheduling...
In my mind, I expect to have all these dates set back of one week...
Regards
Rudy
Rudy

I tried updating to iOS 8.1 but it have the apple symbol and a blue screen pops up and it restarts the process and its been going on about 3 weeks already. I dont know what to do? Is my iPad broke cause I just got that iPad in August.

I tried updating to iOS 8.1 but it have the apple symbol and a blue screen pops up and it restarts the process and its been going on about 3 weeks already. I dont know what to do? Is my iPad broke cause I just got that iPad in August.

Hi You may have a hardware fault take ipad to Apple Store. Ring then first to make an Appointment take box and you purchase paperwork they may give you A replacement. Before you do that Try a Reboot hold down power button & menu button hold both down until you see Apple Logo you may need to hold down for up to 30 Seconds But you may need to do this more than once. If it doesn't work take back to Apple Store. Cheers Brian

What do i do i was downloading the ios7 to my iphone 4s and its frizzed it wont load or turn off

what do i do i was downloading the ios7 to my iphone 4s and its frizzed it wont load or turn off and my last backup is from 2012 and i dont want to loose my contact information.

You will have to contact iTunes and resolve the problem before being
able to download. Start here:
http://www.apple.com/support/itunes/contact/

How to catch the error occurred in Integration Process, and then save it?

1. how to catch the error occurred in Integration Process, and then save the detailed error message to the file?
2. there are fault message type for inbound message interface, how to use the fault message type in IR?
Thanks,
Michael
Message was edited by: Spring Tang
inital
Message was edited by: Spring Tang
detailed message output
Message was edited by: Spring Tang
fault message type

Hi Spring,
If u give an exception step along with your Transformation Step, whenever some error occurs in your message mapping, this exception block wil be triggered.
You can configure your exception block to do all exception processing that you want. This exception handling is like any other java Exceptio n Handler. You can do anything that you want in your exception handler block on the basis of your requirements.
<i>If an exception is triggered at runtime, the system first searches for the relevant exception handler in surrounding blocks. If it does not find the correct exception handler, it continues the search in the next block in the block hierarchy.
When the system finds the correct system handler, it stops all active steps in the block in which the exception handler is defined and then continues processing in the exception handler branch. Once the exception handler has finished processing, the process is continued after the block.
If the system fails to find an exception handler, it terminates the integration process with an error.</i>
Regards,
Bhavesh

In downloading a TV show from iTunes to my PC the file is stuck in processing and never completes the download

When downloading a purchased TV show from the Itunes store to my PC (Windows 7) the file is stuck in processing and never completes the download.

The EXACT same thing happened to me last night! Rented a movie; it had barely started and then froze. When I touch the video app icon, all I get is a blank, dimly lit screen. None of the other videos I own will display either. Was your problem ever resolved?

I can't purchase through the game ap clash of clans and its referring me to apple support....

I can't purchase through the game ap clash of clans and its referring me to apple support....

Do what it told you to do.
Contact itunes support

Command to compute the CPu utilisation of a process and its respective chil

Similar Messages

Maybe you are looking for