Command to open all inserts

What is the command to open all plug-in inserts on a track, either from the inspector view or the mixer view?

Open all of them ?
I might have a drum track that has compression and EQ on it and a guitar track that has all the individual possibilities of the Pedalboard and compression, EQ, a couple of kinds of modulation fx on a keyboard track, compressor, maybe some groovy Limiter on the bass etc..
That's only basic guitar, bass, drums and keyboard tracks, so, sorry if I've missed the point, but are you sure you want to open all of them ?

Similar Messages

Is there a command to open all speed dials in new tabs without ckicking each speed dial individually? Thank you in advance!

Is there a command to open all speed dials in new tabs without ckicking each speed dial individually? Thank you in advance!
== This happened ==
Every time Firefox opened
== always

Don't use that extension myself.
See the Speed Dial manual on this website:
http://speeddial.uworks.net/

Mavericks won't accept 'change all' command to open ALL pages files with v 4.3 app

Hello again,
I upgraded my MacBook Air mid June 2013 build to Mavericks at my Apple store. The download was fast, under 30 min., and the installation went well, also fast at about 40 minutes. All apps are working fine. I spent much time before taking the plunge to learn the pros and cons of this upgrade, and the biggest issue for me was the ability to keep using the older versions of Pages and Numbers. The new, watered down versions cannot do what I need. I followed the instructions to select a Pages file in Finder, open the Info pane, and under 'Open with' selected the old version. Then, to apply this to ALL the files, I selected 'Change all...' and 'Continue'. But, it still lists the new version as default. So far, the only fix is to go through ALL my files and manually choose the old version for each. Very laborious. Am I missing something? It seems Mavericks will not accept to change them all for some reason.
Thank you, Cinilla

I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
Today I discovered a new treasure of doggie poop in Lion. No Save As......
I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
I am starting to believe that Apple is Satan.

Open all Bins as Tabs

Yes, there is NO limit to my ignorance...
Is there a command to open all bins as tabs within the project window?

LL,
I believe that is in the territory of a feature request. No mention of being able to open mutliple bins as tabs in mentioned in the Help documentation:
http://helpx.adobe.com/premiere-pro/using/organizing-assets-project-panel.html#working_wit h_bins
Make a feature request, it's a good one: http://www.adobe.com/go/wish
Thanks,
Kevin

How can I open all the tabs saved in a sub folder of the bookmark menu simultaneously in a single click/command ?

I have saved some of the related tabs in a common sub folder in the bookmarks list and whenever i have to open this tabs always i have to open them individually coz the 'open all in new tabs' option is not available for subfolder, so is there any command or click available from which i can directly open all the saved tabs of a subfolder simultaneously in one single attempt ? using vaio laptop, windows 7 basic, firefox version 6.0.2 !

yes i do that on my desktop but i dont have middle click option on laptop and even in the right click context the ''open all in tabs'' option is desplayed but is in light color i.e. not functional. Is this a problem with windows 7 or missing plugin or add on could help or extension of some sort ? please help !

How can I open all attachments in mail at once?

I use Mail to collect messages from the IMAP server rather than logging in through my university's webmail interface. I often get mail messages with many attachments that all need to be opened at once (example: an admissions application that has 7 or 8 components for me to review). Clicking on each of them separately is a pain, particularly since I have repetitive strain issues, and the various applications needed to open the attachments (Word and Adobe Reader for example) want to grab focus after every click, forcing me to keep switching programs.
Is there any way I can tell Mail to just open all attachments to a message at once?

Try:
Select the attachments you want to open. (Use click, shift click, command click, as usual.) Control-click on (one of) the selected attachments. Then select "Open Selected Attachments".
charlie

Firefox 7 crashes when using "open all in tabs"

Since upgrading to FF7 (and 7.0.1) every time I use the "open all in tabs" command from the folder of bookmarks in the bookmarks toolbar, the whole thing freezes and never finished loading any of the pages. I also can't open another window and get anything to load there.
I'm tried starting up in safe mode and still have the issue. I reinstalled FF6 right over FF7 and it was back to normal with no problems.
No crash reports since it doesn't get that far. I have to close all windows and restart FF, then it works again until I try open all in tabs.

Finally found a fix that is working for me! I've been using it for the last 10 mins or so and has not crashed/hung once yet!
'''Go to about:config and change the max connections from 256 to 48. The setting is "network.http.max-connections"'''
Found here: [http://forums.mozillazine.org/viewtopic.php?f=38&t=2323259 LINK]
So far so good. Please comment if this works for you as well!

When restarting firefox after a crash, how do I stop it from re-opening all web pages that were open at the time of the crash?

When firefox crashes, or if it hangs and I have to kill it, then when I go to restart it, it tries to re-open all pages that were open at the time it crashed or was killed. This is incredibly annoying, especially if one of the visited pages caused the crash or hang. It is also really annoying if some of the web pages happened to require passwords to log in, from multiple sites. In my case this occurs as I am frequently logged into multiple online educational web sites like ucsc-extension.edu and berkleemusic.com. In the login case you get multiple login prompt pop-ups with no way to correlate which pop-up goes with which web page. If there are a lot of them then it's a hopeless mess. This behavior is something that I never ever want and it infuriates me that not only is it the default behavior, it is something that there seems to be no way to turn off, at least via the configuration menus. Am I wrong? Is there a way to turn this off? If not can somebody either make it configurable or get rid if this fantastically idiotic behavior?
I suspect there's a command line option for this but on my Mac (or most systems these days) it's sort of "unnatural" to be starting programs like browsers by means other than a provided program start-up icon, which gives you no choice about the command line options.
Besides, as a default behavior the current behavior is something I cannot conceive of ever wanting. I would rather have a poke in the eye with a sharp stick.
== This happened ==
Every time Firefox opened
== firefox crashed

You can try this.
In the address bar type about:config you will be warned that this is dangerous.
Search for browser.sessionstore.resume_from_crash
Double click on true to toggle it to false.
Exit the page.
Firefox will now NOT try to reload websites after a crash.

In Safari I can define what pages are loaded when I open a "New Window". How do I achieve the same in Firefox (and supress the current begavior of it opening all of the tabs that I defined as my home page all the time)?

I am returning to Firefox after having used Safari on Mac for the past year. One thing I liked about Safari was that I could define what page gets loaded when I used the File Menu command to open a new Browser Window. I defined this as opening up with my Bookmarks Menu where I then was able to select the page I wanted to go to.
I have not been able to find a way to define this in Firefox and was surprised to see that "New Window" in Firefox opens all of tabs that I've defined as my Home Page.
Is there a way to manage this?

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How to open all bookmarks in a folder

Hello,
I've had a longstanding question regarding the behavior of bookmark folders and the Command/Ctrl"shortcut" that acts as if selecting Open All in Tabs.
Why does the menu open when I Command click on a bookmark folder from the bookmarks toolbar? It forces the user to "click out" to exit the menu to continue. This essentially negates the benefit of the Command click shortcut. If I have to click twice, I may as well open the bookmark folder normally and select Open All in Tabs.
I'm assuming that Command/Control click is intended to be a shortcut feature to open all the bookmarks contained within a folder on the toolbar. It seems like unwanted functionality to have that menu open. If someone is trying to use the "shortcut" they don't intend to make a selection from the menu and wouldn't need it to open.
Let me know how I need to proceed. I'm not sure if this is a really old bug, a feature request, or just something I'm missing. If you could point me in the direction of an add-on or configuration parameter that would allow me to change this on my own, that would be much appreciated. Thanks!!!

I never noticed that glitch with {Ctrl + Click} on a folder on the Bookmarks Toolbar before you mention it now. I have always used a Middle-click to open all the bookmarks in a folder, the downside is that it opens new tabs and doesn't overwrite the tab that is already open.

How can I open all sync'ed open tabs all at once?

I would like to be able to open all sync'd open tabs on my 2nd computer all at once instead of clicking on each one of them from a list from the History menu.
== This happened ==
Every time Firefox opened
== I first installed FF Sync

The only way I know of doing this is to highlight all tabs in blue, in the history menu (shift and click) and then right click to open all. This should be a one button command! Thanks, hope this changes.

Is there a way to bypass all inserts on a track at once?

When recording with a ton of inserts, the latency is in the vicinity of about .5 seconds - so is there a way to bypass all inserts on a channel at one?
So far, I have to open each one and hit "bypass" but I do it so much, since I need to hear it after the inserts, it ends up taking a lot of time.
I also tried to save the channel setting, reset the channel, then re-insert the channel, but then all automation is lost....

Not as far as I know, but there are two things that might help.
1) You don't need to open a plug-in to bypass it - just option-click on its insert slot.
2) Check out low latency mode. (prefs -> audio -> general) which will bypass plug-ins which exceed your latency preference. Click it off when you're done.

Aperture 3.5 does not open all files in external editor (PS CS6)

When I select several photos in Aperture (which are parts of a panorama serie for example) and click choose to open them in the external editor (here Adobe Photoshop CS6), only a random subset are opened.
Aperture warns me if I want the (for example) 14 pictures to be exported for edition, I confirm, but I end up with only (for example) 9 photos in Photoshop. The missing ones can be any photos (not necessarily the first or latest).
Note that 9 is not an upper limit, I once opened 23 photos and only had 21 in Photoshop opened.
If I again select those same photos and choose to export them (either as PSD using the same format as with the Editor command, or asking for the original that was created for the external editor) to a folder. Then when I open all the photos at once form the finder (or Bridge) to Photoshop, I have all the photos in Photoshop. So Photoshop has no problem opening the files.
Do you have the problem too? How do you solve it?
For the time being I manually export the files, open them from the Finder, stitch them in PS and reimport the result in Aperture.
A bit tedious... If there is no work around, I will try to fiddle with some automation...
Final note:
PS CS6, Aperture and OS X are all at there latest respective versions (i-e respectively: 13.0.6, 3.5.1 and 10.9.2)

I was just noticing this issue with A2.0.1
Selecting multiple files in A2, only one would open in Photoshop.
I have found that, if when opening files from Aperture, the color setting profile in PS is different than the color tag in the image, such as sRGB vs aRGB, the mismatch warning appears and stops subsequent photos opening.
If the image profile matches the color settings in PS, then all selected photos open from Aperture to PS.

Adobe Reader 9.4 has started to open all my PDF documents continuously

Recently, every time I open Adobe Reader, or click on a PDF document on file to open it, Reader starts opening all PDF documents on file continuously until I get a message saying there are too many open documents to open any more. The only way out appears to be use of force quit.
Have I picked up some kind of virus, or is there just a setting that I need to change?

Oddly, it sort of sounds like app behavior under Mac OS X Lion. Lion has a feature called Resume that puts an app that is launched into the state it was in when it last quit. So, if certain documents were open when it last quit, those documents would "resume" (re-open automatically) the next time the app is launched.
Now, your profile info says you have a PowerPC iMac running Leopard (and you are posting the "iMac (PPC)" forum), so this should not apply. But maybe you are running Lion on a newer Mac and your profile info is old. Or maybe Adobe Reader has been updated to have a restore open documents feature. In that case, if you accidentally selected all in a folder full of many PDF files and opened them all, and then you quit Reader in that state, that "state" may have been saved for the next time you launched Reader. By closing each document manually, and then quitting Reader, you changed the state when last quit to having no open documents.
If this happens again (in any app), these commands may be useful to know:
There is usually a Close command under the File menu (in the Menu Bar). If you press the Option key, that command changes to Close All. So if an app unintentionally opens a very large number of windows (and it is not locked up as a result), you can give the Close All command instead of manually closing each window.
In Lion, if you press (and hold) the Shift key while launching an app, the app launches with a "clean slate" (ignoring the state when it last quit). I don't know if that would have worked in your case, but it would have been worth a try. Sorry I did not think of it before; I did not see the possible connection to the Resume feature.

Key Command for Selecting All in Stack?

- Hi, I'm wondering if there is a key command that I missed that allows you to select all items in a stack when it is collapsed?
I'm mostly using Bridge for the Stacks feature. I actually prefer to use cataloging programs for DAM. But shooting HDR, stacks are a must!
But when I want to do things with the images in a stack, such as deleting them all, opening in Photoshop (individually or to merge), etc., it only selects the top image by default.
I must be missing something. It's a drag to have to open/close all the time.
And a separate but related issue:
- Does anyone know why all stacks are removed when you do a Batch Rename on a set of photos?
I let Photoshop churn for 30min. + on the 'combine HDR/Panorama into stacks' command. Got all my HDR sets grouped nicely as stacks. Then decided to batch rename them and presto - no more stacks! Had to do it all over again!!!

Hi Kenny,
To apply a command to all photos in a collapsed stack, you must select them all by clicking the stack border, not the top image. See
Stack files in Bridge Community Help.
I'm not sure about the batch rename issue that you describe. Maybe someone else can chime in on that.

Command to open all inserts

Similar Messages

Maybe you are looking for