Command to open Messager Server 3600
Hi Experts,
I want to open a Messager Server Port 3600
Could anyone provide me the command to open this port at command line, My OS is Windows
Thanks
Murtuza
hi,
Just like Markus said your SAP server will listen to port 3600.
To make sure that your port (3600) on SAP server is open, you can type :
TE:LNET <IP ADDRESS OF YOUR SAP SERVER> 3600
If you get blank screen then you are connected.
ardhian
http://ardhian.kioslinux.com
http://sapbasis.wordpress.com
Similar Messages
-
Unable to open Messaging Server 6.2 through admin console 5.2
my system is
Sun Java(tm) System Messaging Server 6.2-3.05 (built Nov 23 2005)
libimta.dll 6.2-3.05 (built 02:22:19, Nov 23 2005)
Microsoft Windows 2000 version 5.2 (Build 3790)
i installed Sun Java Enterprise System (directory, admin, messaging) servers on my windows 2003 server, all is working fine except:
1- unable to open my messaging server through my admin console 5.2.
when checking the error log file i see
"[05/Jun/2006:10:51:49] failure ( 2624): for host t.est.hotmail.com trying to GET /msg-config/tasks/operation/cgi_root, cgi_scan_headers reports: the CGI program E:\Sun\Server-Root\bin\msg\admin\bin\cgi_root.exe did not produce a valid header (program terminated without a valid CGI header. Check for core dump or other abnormal termination)"
Any clue?
2- When creating a new user through the admin console 5.2, and check the mail account checkbox, i don't get the "mail tab" to complete the needed information, and therefore the newly created user is not an active email account as mainly the mailhost attribute has not been created for the account
Is this related to the problem in point 1?
NOTE 1: i ran cmm_dssetup.pl before configuring the messaging server and selected schema 1
NOTE 2: i downloaded the software from sun.com, didn't register it yet as i'm in the testing phase
Appreciate your help, direction and tipsOh, my.....
1. The Directory Console is not very useful, for anything in Messaging 6. The MTA is configured via editing files, and the mail store is better configured using the configutil utility.
2. You SHOULD NOT attempt to create users with the Directory Console. They won't work. Use either the command-line tools provided (comm-admin), or use the Delegated Admin tool provided. -
I have 2 exchange server "A" and "B". Server "A" have "Test1" database and Server "B" have "Test2" database. I tried move some mailboxes from "Test1" to "Test2"
but sometimes mailboxes cannot finished and display below error. I used Domain administrator to move mailboxes and grant "Manage full access permission" to these mailboxes but still failed. Finally, I clear the failed move request
and repeat the move mailboxes action several times. Then, the move request completed without error. Have any suggestion? Please help. Thank you!
Mailbox move for 'xxx.com/xxx/xxx/xxx - Users/xxx/Peter' (331d5b4e-0bd1-428a-ae28-d97581ae0d7f) has failed.
Error code: -2147024891
MapiExceptionNoAccess: Unable to open message store. (hr=0x80070005, ec=-2147024891)
Diagnostic context:
Lid: 18969 EcDoRpcExt2 called [length=132]
Lid: 27161 EcDoRpcExt2 returned [ec=0x80070005][length=202][latency=0]
Lid: 32881 StoreEc: 0x80070005
Lid: 50035
Lid: 64625 StoreEc: 0x80070005
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropLogon [254]
Lid: 56503
Lid: 12716 StoreEc: 0x80070005
Lid: 20794
Lid: 28474 StoreEc: 0x80070005
Lid: 22330 dwParam: 0x0 Msg: 14.03.0123.002:NHK-S08-MBD02
Lid: 1750 ---- Remote Context End ----
Lid: 23354 StoreEc: 0x80070005
Lid: 25913
Lid: 21817 ROP Failure: 0x80070005
Lid: 26297
Lid: 16585 StoreEc: 0x80070005
Lid: 32441
Lid: 1706 StoreEc: 0x80070005
Lid: 24761
Lid: 20665 StoreEc: 0x80070005
Lid: 25785
Lid: 29881 StoreEc: 0x80070005
Context:
Mailbox: Primary (331d5b4e-0bd1-428a-ae28-d97581ae0d7f)Hi Gordon
This could happen if there is any mailbox which has occupied more space than its normal quota allocated.
As suggested by geo try to clean all the DB's first
You can probably run Get-Mailboxdatabase | Clean-Mailboxdatabase which will clean all of your DB's wait for some time until it gets completed
Also try running the command with the MRS server parameter switch and specify a CAS FQDN and see the results if it gets succeded
Get-Mailbox -Database 'DBNAME'| New-MoveRequest -TargetDatabase DBNAME -BatchName "BATCHNAME" -BadItemLimit 100 -AcceptLargeDataLoss -MRSserver CAS server FQDN Good Luck !!Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you.
Regards,
Sathish -
while trying to access my local network I get the message..."The page could not be opened because server cannot be found." This, after updating to Yosemite and paying (again) for the server app.
It's absolutley scandalous that a company with Apple's resources can let this happen. They should have staggered the release by region rather than opening the flood gates. The upgrade itself took me about 10 attempts to download it, and then I thought I was home free. That was until it rebooted and won't activate. It's over 2 hours now.
Scandalous! -
Messaging server user "mailsrv" continously using the netstat command
I can notice a lot of netstat commands for the mailsrv user and parent id tcp_smtp_server.
Is this normal? Any ideas?We have had this query before, most recently a few years ago.
Messaging Server itself does not directly call netstat, at all. However, it's possible that one or another system call we make could be calling netstat. It's the OS responsibility to return something like that quicklyl. We have had reports of these things occastionally taking a long time. That's not a normal issue. -
Command-Line Remove Open Directory Server
What is the terminal command to remove an Open Directory server?
On LDAP server open the Terminal and run this:
+sudo slapconfig -destroyldapserver+
*man slapconfig* will give you more interesting options -
Hi i'm trying to delete my bulk mail messages but it keep telling me this message"The IMAP command “DELETE” failed with server error: DELETE failed - Mailbox is reserved " is there any way to delete of stop messages from coming into it ??
thanksSounds like the mail server thinks you are asking to delete the bulk-mail mailbox instead of some/all of the messages within it.
How are you trying to delete your bulk mail messages? That is, what are you doing, step by step, up to the error message.
What you should probably be doing is selecting the bulk mail mailbox, selecting one of more messages inside it, then hitting the "delete" key. -
Integrating calendar server with messaging server
hi all,
i have installed messaging server but am not able to bind messaging server and calendar server together.the calendar server does not start with ./start-cal command.i am attaching the ics.conf file below.
!!!! ics.conf Parameter Specification: You can have three kinds of records
!!!! #1) Uncommented Key: Starts with alphabet [a-z] and in the form a="b"
!!!! #2) Commented key: Start with !!<alphabet> OR !![a-z]
!!!! And in the form !!a="b" (min 7 chars length)
!!!! #3) Commented Lines: Starts with ! But not with !![a-z]
!!!! #4) Records other than types #1, #2, #3 will be ignored or won't be
!!!! processed e.g. blank lines, lines starting with non-alphabets etc..
!!!! All these parameters are SINGLE valued
!!!! Imaginary Domain Names siroe.com, varrius.com, florizel.com, and sesta.com
!!!! are used in the examples below.
! Description sent with insufficient disk space messages.
alarm.diskstat.msgalarmdescription = "percentage calendar partition diskspace available"
! Number of seconds between monitoring disk space.
alarm.diskstat.msgalarmstatinterval = "3600"
! Percentage of available disk space that triggers sending a warning message.
alarm.diskstat.msgalarmthreshold = "10"
! Whether alarm.diskavail.msgalarmthreshold is above or below percentage. -1 is below and 1 would be above.
alarm.diskstat.msgalarmthresholddirection = "-1"
! Number of hours between sending warning messages about insufficient disk space sent out.
alarm.diskstat.msgalarmwarninginterval = "24"
! Specifies the SMTP host for server alarms.
alarm.msgalarmnoticehost = "sonlinux.bg2iop.com"
! Specifies the SMTP port for server alarms.
alarm.msgalarmnoticeport = "25"
! Who are server alarms sent to?
alarm.msgalarmnoticercpt = "[email protected]"
! When server alarms are sent, who is the sender?
alarm.msgalarmnoticesender = "[email protected]"
! Default is "From: %s\nTo: %s\nSubject: ALARM: %s of \"%s\" is %u\n\n%s\n"
alarm.msgalarmnoticetemplate = ""
! Description sent with no service response messages.
alarm.responsestat.msgalarmdescription = "calendar service not responding"
! Number of seconds between monitoring services.
alarm.responsestat.msgalarmstatinterval = "3600"
! Only trigger sending a warning message if no service response.
alarm.responsestat.msgalarmthreshold = "100"
! Whether alarm.responsestat.msgalarmthreshold is above or below percentage. -1 is below and 1 would be above.
alarm.responsestat.msgalarmthresholddirection = "-1"
! Number of hours between sending warning messages about no service response sent out.
alarm.responsestat.msgalarmwarninginterval = "24"
! Enable (yes) or Disable (no) browser cache for performance reasons.
browser.cache.enable = "no"
! Retry time in seconds after a recoverable alarm delivery error.
caldb.berkeleydb.alarmretrytime = "300"
caldb.berkeleydb.archive.enable = "0"
! Interval between hotbackup or archivebackup in seconds
caldb.berkeleydb.archive.interval = "120"
! Maximum number of days of archivebackup
caldb.berkeleydb.archive.maxdays = "6"
! Minimum number of days of archivebackup
caldb.berkeleydb.archive.mindays = "3"
caldb.berkeleydb.archive.path = "/var/opt/sun/calendar/csdb/archive"
! Percentage threshold of allowable disk space usage
caldb.berkeleydb.archive.threshold = "70"
! Seconds between checkpointing.
caldb.berkeleydb.checkpointinterval = "60"
! Remove checkpoint files after synchronized? (yes/no)
caldb.berkeleydb.circularlogging = "yes"
! Milliseconds between checking database deadlocks.
caldb.berkeleydb.deadlockinterval = "100"
! Enable more advanced notifications - replyevent/refreshevent/replytodo/refreshtodo considered
! as advanced topics. By default, all these notifications will be published to
! modifyevent and modifytodo respectively. If it is enabled modifyevent will get only
! organizer updates to components and attendees replies and the refreshes triggered by replies
! to components will be published to the respective topics. (yes/no)
caldb.berkeleydb.ensmsg.advancedtopics = "no"
! Create an ENS message when a calendar is created? (yes/no)
caldb.berkeleydb.ensmsg.createcal = "no"
! Create an ENS message when an event is created? (yes/no)
caldb.berkeleydb.ensmsg.createevent = "no"
! Create an ENS message when a task is created? (yes/no)
caldb.berkeleydb.ensmsg.createtodo = "no"
! Create an ENS message when a calendar is deleted? (yes/no)
caldb.berkeleydb.ensmsg.deletecal = "no"
! Create an ENS message when an event is deleted? (yes/no)
caldb.berkeleydb.ensmsg.deleteevent = "no"
! Create an ENS message when a task is deleted? (yes/no)
caldb.berkeleydb.ensmsg.deletetodo = "no"
! Create an ENS message when a calendar is modified? (yes/no)
caldb.berkeleydb.ensmsg.modifycal = "no"
! Create an ENS message when an event is modified? (yes/no)
caldb.berkeleydb.ensmsg.modifyevent = "no"
! Create an ENS message when a task is modified? (yes/no)
caldb.berkeleydb.ensmsg.modifytodo = "no"
! Initial size of the in-memory Event Notification Server message queue. This queue stores all ENS messages other than alarm reminders.
caldb.berkeleydb.ensmsg.qsize = "10000"
! Create an ENS message when an event is refreshed? (yes/no)
caldb.berkeleydb.ensmsg.refreshevent = "no"
! Create an ENS message when a task is refreshed? (yes/no)
caldb.berkeleydb.ensmsg.refreshtodo = "no"
! Create an ENS message when an event is replied? (yes/no)
caldb.berkeleydb.ensmsg.replyevent = "no"
! Create an ENS message when a task is replied? (yes/no)
caldb.berkeleydb.ensmsg.replytodo = "no"
! Create an ENS message when a scheduling request written to the calendar is deleted? (yes/no)
caldb.berkeleydb.ensmsg.schedreq = "no"
! Physical path location of database event, task, and alarm files.
caldb.berkeleydb.homedir.path = "/var/opt/sun/calendar/csdb"
caldb.berkeleydb.hotbackup.enable = "0"
! Maximum number of days of hotbackup
caldb.berkeleydb.hotbackup.maxdays = "6"
! Path for archivebackup
!caldb.berkeleydb.archive.path
! Path for hobackup
!caldb.berkeleydb.hotbackup.path
! Enable/disable of archivebackup feature, yes/no
!caldb.berkeleydb.archive.enable
! Enable/disable of hotbackup feature, yes/no
!caldb.berkeleydb.hotbackup.enable
! Minimum number of days of hotbackup
caldb.berkeleydb.hotbackup.mindays = "3"
caldb.berkeleydb.hotbackup.path = "/var/opt/sun/calendar/csdb/hotbackup"
! Percentage threshold of allowable disk space usage
caldb.berkeleydb.hotbackup.threshold = "70"
! Max megabytes of checkpoint file.
caldb.berkeleydb.logfilesizemb = "10"
! Max threads of database.
caldb.berkeleydb.maxthreads = "10000"
! Megabytes of shared memory.
caldb.berkeleydb.mempoolsizemb = "4"
! Time before which to purge deletelog
caldb.berkeleydb.purge.deletelog.beforetime = "86400"
! Time interval between auto purge of deletelog
caldb.berkeleydb.purge.deletelog.interval = "86400"
! If "yes", open the database in readonly mode
caldb.berkeleydb.readonly = "no"
! Email of calendar database administrator.
caldb.calmaster = "[email protected]"
! Seconds between checkpointing.
caldb.cld.cache.checkpointinterval = "60"
! Remove checkpoint files after synchronized? (yes/no)
caldb.cld.cache.circularlogging = "yes"
!service.calendarsearch.ldap.primaryownersearchfilter = "(&(|(uid=*%s*)(cn=*%s*))(objectclass=icsCalendarUser))"
! Enables ("yes") or disables ("no") cld db cache
caldb.cld.cache.enable = "yes"
! Physical path location of cache database
caldb.cld.cache.homedir.path = "/var/opt/sun/calendar/csdb/cld_cache"
! Max megabytes of checkpoint file.
caldb.cld.cache.logfilesizemb = "10"
! Max threads of database.
caldb.cld.cache.maxthreads = "1000"
! Megabytes of shared memory.
caldb.cld.cache.mempoolsizemb = "4"
! Type of Calendar Lookup Database plugin to use ("local" "algorithmic" or "directory").
caldb.cld.type = "local"
! Count data base statistics? (yes/no)
caldb.counters = "yes"
! Maximum number of calendars with counters.
caldb.counters.maxinstances = "100"
! Maximum number of backlogged requests before the server obtains a new network connection.
caldb.dwp.connthreshold = "1"
! Initial number of connections for DWP client to make to each DWP host.
caldb.dwp.initconns = "2"
! Initial number of threads for handling DWP requests.
caldb.dwp.initthreads = "2"
! Maximum number of connections allowed to a DWP server.
caldb.dwp.maxcons = "1000"
! Maximum number of threads to service HTTP requests in csdwpd.
caldb.dwp.maxthreads = "1000"
! Specifies if the server performs MD5 hash checking of all DWP requests.
caldb.dwp.md5 = "n"
! IP address of a specified DWP server.
!!caldb.dwp.server.[hostname.xyz.com].ip = "a.b.c.d"
! Port number of a specified DWP server (Algorithmic CLD only).
!!caldb.dwp.server.[hostname.xyz.com].port = "59779"
! Default DWP server (LDAP CLD only), used if user's icsDWPhost value does not exist.
!!caldb.dwp.server.default = "hostname.xyz.com"
! Stack size for DWP threads.
caldb.dwp.stacksize = "65536"
! Process alarms on the alarm queue -- that is, store them in the alarm queue when an event/todo is saved
caldb.serveralarms = "1"
! Timeout for contacting ENS. If no response, we assume ENS is not running
caldb.serveralarms.acktimeout = "30"
! Dispatch -- that is, enable alarm dispatching. When an alarm trigger time arrives send out email or ENS message.
caldb.serveralarms.dispatch = "yes"
! Enable binary alarms. Used by csnotifyd and csadmind. (default: yes)
!caldb.serveralarms.binary.enable = "yes"
! Binary alarm url. Used by csnotifyd and csadmind. (default: enp:///ics/alarm)
!caldb.serveralarms.binary.url = "enp:///ics/alarm"
! Custom alarm url. Use this to get xml or calendar mime type contents
!caldb.serveralarms.url = "enp:///ics/customalarm"
! Custom alarm url contenttype. (text/xml or text/calendar)
!caldb.serveralarms.contenttype = "text/calendar"
! Dispatch type for Calendar Server alarms ("ens" o "smtp").
caldb.serveralarms.dispatchtype = "ens"
! Initial number of threads for the Event Notification Server.
caldb.serveralarms.initthreads = "0"
! Specifies how long, in seconds, the server will continue to try reconnecting to ENS before giving up. -1 means forever.
caldb.serveralarms.maxretrytime = "-1"
! Maximum number of threads for the Event Notification Server
caldb.serveralarms.maxthreads = "10"
! Time to sleep, in seconds, after a timeout connecting to ens before making another attempt to connect to ens
caldb.serveralarms.retryinterval = "5"
! Stack frame size for Event Notification Server threads.
caldb.serveralarms.stacksize = "65536"
! Total time, in seconds, to retry connecting to ENS on startup.
caldb.serveralarms.startupretrytime = "30"
! Send alarms to this SMTP host.
caldb.smtphost = "sonlinux.bg2iop.com"
! Specifies the directory in cal/bin/config containing the localized version of the files used to format email notifications.
caldb.smtpmsgfmtdir = "en"
! Specifies the SMTP port.
caldb.smtpport = "25"
! Event reminder format file.
calmail.eventreminder.fname = "mail_eventreminder.fmt"
! Event cancellation format file.
calmail.imipeventcancel.fname = "mail_eventcancel.fmt"
! Event CANCEL NOTIFICATION message format file
calmail.imipeventcancelnotification.fname = "mail_eventcancelnotification.fmt"
calmail.imipeventcancelnotificationrecur.fname = "mail_eventcancelnotificationrecur.fmt"
! Event NOTIFICATION message format file
calmail.imipeventnotification.fname = "mail_eventnotification.fmt"
calmail.imipeventnotificationrecur.fname = "mail_eventnotificationrecur.fmt"
! Event notification format file.
calmail.imipeventpublish.fname = "mail_eventpublish.fmt"
! Event REPLY message format file
calmail.imipeventreply.fname = "mail_eventreply.fmt"
! Event REQUEST message format file
calmail.imipeventrequest.fname = "mail_eventrequest.fmt"
! Task cancellation format file.
calmail.imiptodocancel.fname = "mail_todocancel.fmt"
! Task notification format file
calmail.imiptodopublish.fname = "mail_todopublish.fmt"
! Task REPLY message format file
calmail.imiptodoreply.fname = "mail_todoreply.fmt"
! Task REQUEST Message format file
calmail.imiptodorequest.fname = "mail_todorequest.fmt"
! Task reminder format file.
calmail.todoreminder.fname = "mail_todoreminder.fmt"
! Anonymous login CALID.
calstore.anonymous.calid = "anonymous"
! Does server support only two privacy types for components - PRIVATE (acts as confidential) /PUBLIC instead of PRIVATE/CONFIDENTIAL/PUBLIC
calstore.binaryprivacy.mode = "no"
! When creating new calendar of user, whether to lowercase calendar or not
! Also, when looking up calendar, whether to lowercase or not
calstore.calendar.create.lowercase = "n"
! For a newly created calendar, set the ACL to this
calstore.calendar.default.acl = "@@o^a^r^g;@@o^c^wdeic^g;@^a^fs^g;@^c^^g;@^p^r^g"
! Definition of the "owner" acl
calstore.calendar.owner.acl = "@@o^a^rsf^g;@@o^c^wdeic^g"
! Timezone ID used when importing files.
calstore.default.timezoneID = "America/New_York"
! Whether to filtering the private/confidential events on queries to server
calstore.filterprivateevents = "yes"
! Is user's default calendar included in user's freebusy-calendar-list or not
calstore.freebusy.include.defaultcalendar = "yes"
! Can user's default calendar be removed from user's freebusy-calendar-list or not
calstore.freebusy.remove.defaultcalendar = "no"
! Maximum number attendees to be allowed in a LDAP group when expanding event. Value of 0 means expand group entirely.
calstore.group.attendee.maxsize = "0"
! Maximum number of events created by recurrence
calstore.recurrence.bound = "60"
! Is user's default calendar included in user's subscribed-calendar-list or not
calstore.subscribed.include.defaultcalendar = "yes"
! Can user's default calendar be removed from user's subscribed-calendar-list or not
calstore.subscribed.remove.defaultcalendar = "no"
! For attendee calendar lookup, when encountering string that looks like (jdoe OR jdoe:tv), treat string as a userid (uid) when looking-up in Directory.
! Value can be {uid | cn | gid | res | mailto | cap}
calstore.unqualifiedattendee.fmt1.type = "uid"
! For attendee calendar lookup, when encountering string that looks like ([email protected]) (has @ sign), treat string as a mailto address when looking-up in Directory
! Value can be {uid | cn | gid | res | mailto | cap}
calstore.unqualifiedattendee.fmt2.type = "mailto"
! For attendee calendar lookup, when encountering string that looks like (John Doe) (has space), treat string as a common name (cn) when looking-up in Directory
! Value can be {uid | cn | gid | res | cap}
calstore.unqualifiedattendee.fmt3.type = "cn"
! Maximum number of results returned from LDAP lookup from user search. Value of 0 means no limit.
calstore.userlookup.maxsize = "200"
! Is Server in Virtual Domain mode or not (this affects 5.0p2 only)
calstore.virtualdomain.mode = "n"
! Enable (y) or disable (n) Access Control plugin.
csapi.plugin.accesscontrol = "n"
! Load only the plugin specified in csapi.plugin.authentication.name? (y/n)
csapi.plugin.authentication = "n"
! Enable (y) or disable (n) Calendar Lookup Database plugins.
csapi.plugin.calendarlookup = "n"
! Specifies the name of a specific Calendar Lookup Database plugin to load. If "*", load the plugins.
csapi.plugin.calendarlookup.name = "*"
! Load only the plugin specified in csapi.plugin.database.name or if not specified, load all database plugins in alphabetical order.
csapi.plugin.database = "y"
! Only load this specific plugin if csapi.plugin.loadall is no and csapi.plugin.database is yes.
csapi.plugin.database.name = "cs_caldb_berkeley10"
! Load only the plugin specified in csapi.plugin.datatranslator.name? (y/n)
csapi.plugin.datatranslator = "y"
! Only load this specific plugin if csapi.plugin.loadall is no and csapi.plugin.data translator is yes.
csapi.plugin.datatranslator.name = "cs_datatranslatorcsv10"
! Enable (y) or disable (n) database-to-output format plugins.
csapi.plugin.dbtranslator = "y"
! If "*", then load all the database-to-output format plugins. If a library name, only load that plugin. csapi.plugin.dbtranslator must be set to "yes" to load plugin
csapi.plugin.dbtranslator.name = "*"
! Load all plugins found in the plugins directory? (y/n)
csapi.plugin.loadall = "n"
! Load only the plugin specified in csapi.plugin.userprefs.name? (y/n)
csapi.plugin.userprefs = "n"
! Load only this plugin if csapi.plugin.loadall is no and csapi.plugin.userprefs is yes.
!!csapi.plugin.userprefs.name = "plugin_name"
! Enable the RSA Cypher Encryption Family Services for SSL
!!encryption.rsa.nssslactivation = "on"
! Define the Certificate name for the RSA Cypher Encryption Family
!!encryption.rsa.nssslpersonalityssl = "SampleSSLServerCert"
! Define the location of the RSA Cypher Encryption Family token
!!encryption.rsa.nsssltoken = "internal"
! Specifies if the auto refresh feature is enabled or disbaled. (yes/no)
gse.autorefreshreplystatus = "yes"
! Specifies (in seconds) how long to wait before the server scans the schedule queue for incoming jobs.
gse.belowthresholdtimeout = "3"
! Maximum number of concurrent threads the server uses to process the schedule queue.
gse.maxthreads = "10"
! Maximum length of time the server will retry to complete a group scheduling job.
gse.retryexpiredinterval = "86400"
! Specifies (in seconds) how often the server will retry a previous failing job.
gse.retryinterval = "300"
! Maximum stack size (in bytes) of a group scheduling thread
gse.stacksize = "65535"
! global flags to control notification for invitation and cancellation.
! Enable (yes) Disable (no), default is enabled. Notification will be sent.
ine.cancellation.enable = "yes"
ine.invitation.enable = "yes"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.basedir.path = "/opt/sun"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.betamajorversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.betaminorversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.caldbtype = "local"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csinstalldir.path = "/opt/sun"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodbasedir.path = "/opt/sun/calendar"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodclassesdir.path = "/opt/sun/calendar/classes"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csproddir.path = "/opt/sun"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodjavadir.path = "???"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodlibdir.path = "/opt/sun/calendar/lib"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodtoolsdir.path = "/opt/sun/calendar/tools"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csproduicustdir.path = "/opt/sun/calendar/uicust"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.fullversion = "6.0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.majorversion = "6"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.minorversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.osarch = "i386"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.osname = "linux"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.ostype = "unix"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.osversion = "2.6.9-22.el"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.patchversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.serveruidpassword = "icsuser"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.startupafterinstall = "no"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.startupatboot = "no"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.userauthtype = "ldap"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.userprefstype = "ldap"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.version = "6.0"
! Base DN for LDAP authentication. If not specified, use local.ugldapbasedn.
local.authldapbasedn = "o=bg2iop.com, dc=bg2iop,dc=com"
! Bind credentials (password) for user specified in local.authldapbinddn.
local.authldapbindcred = "admin123"
! DN used to bind to LDAP authentication host to search for user's dn.
local.authldapbinddn = "cn=Directory Manager"Hi Venigalla,
You can implement a federated portal network (FPN) using the SAP NetWeaver platform to share content between portals.
A federated portal network allows organizations with distributed portal installations, both SAP and non-SAP, to provide a single portal access point per user to portal information, services and applications distributed on portals in the network.
WSRP-based application sharing (FPN Mode used for for integrating content between SAP and Non SAP portals) :-
--> Content administrators on a SAP NetWeaver consumer portal can integrate WSRP portlets (i.e. iViews) from remote non-SAP portals into SAP NetWeaver Portal.
--> SAP NetWeaver developers can create WSRP compliant iViews that can be consumed in non-SAP consumer portals.
You may kindly go through the below link, should be helpful:
http://help.sap.com/saphelp_nw70/helpdata/EN/43/23fb36cad10d23e10000000a1553f7/frameset.htm
Regards,
Anagha -
Dispatcher running but unable to connect to message server
Hi all,
I have installed ECC 6.0 EHP 4 on MAXDB 7.7.
After doing post steps and installing license I did local client copy, client copy stuck in between and I noticed that session hanged so I opened a new session and found that I was not able to run and t-code and and unable to login to the server although login screen appears( Login process continues but no result).
I realized the data or log directory may be filled up, so I checked and that was not the issue.
So I restarted the Server.
Now I am unable to see the login screen too and in SAP MMC dispatcher is yellow "Running but not connected to message server".
R3trans result is below
R3trans -d
2EETW169 no connect possible: "DBMS = ADABAS D --- DBNAME = ''"
r3trans finished (0012)
I am new to MAXDB database.
I installed database manager and checked the data folder status and find there is enough free space but log directory is 100% so i created new volume for log directory (not sure if any thing else is required to activate it, asl its still showing log directory 100% usage).
dev_ms log is as below
trc file: "dev_ms", trc level: 1, release: "701"
[Thr 2632] Wed Sep 29 16:26:35 2010
[Thr 2632] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 562 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 11
intno 20020600
make: multithreaded, Unicode, 64 bit, optimized
pid 2788
[Thr 2632] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2788) [msxxserv.c 1853]
[Thr 2632] load acl file = D:\usr\sap\DEV\SYS\global\ms_acl_info.DAT
[Thr 2632] MsGetOwnIpAddr: my host addresses are :
[Thr 2632] 1 : [192.168.1.4] raddev (HOSTNAME)
[Thr 2632] 2 : [127.0.0.1] raddev (LOCALHOST)
[Thr 2632] MsHttpInit: full qualified hostname = raddev
[Thr 2632] HTTP logging is switch off
[Thr 2632] set HTTP state to LISTEN
[Thr 2632] ms/icf_info_server : deleted
[Thr 2632] *** I listen to port sapmsDEV (3600) ***
[Thr 2632] *** I listen to internal port 3900 (3900) ***
[Thr 2632] *** HTTP port 8100 state LISTEN ***
[Thr 2632] CUSTOMER KEY: >W0104018144<
[Thr 2632] build version=701.2008.03.06
[Thr 2632] Wed Sep 29 16:37:07 2010
[Thr 2632] *** ERROR => MsSCheckConnections: no response from client C1 (raddev_DEV_00) after 300 secs received [msxxserv.c 3205]
[Thr 2632] *** ERROR => MsSCheckConnections: disconnect now [192.168.1.4] [msxxserv.c 3209]
please reply...
Regards
VinayHi Sunil,
Here is the trans.log
4 ETW000 r3trans version 6.14 (release 701 - 26.01.09 - 12:46:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 06.10.2010 - 14:11:50
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Oct 06 14:11:50 2010 5087 0.005087
4 ETW000 [dev trc ,00000] db_con_init called 40 0.005127
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 6818 0.011945
4 ETW000 [dev trc ,00000] Loading DB library 'dbsdbslib.dll' ... 45 0.011990
4 ETW000 [dev trc ,00000] load shared library (dbsdbslib.dll), hdl 0, addr 0000000186C80000
4 ETW000 59114 0.071104
4 ETW000 [dev trc ,00000] using "D:\usr\sap\DEV\SYS\exe\uc\NTAMD64\dbsdbslib.dll"
4 ETW000 21 0.071125
4 ETW000 [dev trc ,00000] Library 'dbsdbslib.dll' loaded 17 0.071142
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbsdbslib.dll
4 ETW000 9745 0.080887
4 ETW000 [dev trc ,00000] Wed Oct 06 14:11:51 2010 3372 0.084259
4 ETW000 [dev trc ,00000] Version of 'dbsdbslib.dll' is "700.08", patchlevel (0.24)
4 ETW000 20 0.084279
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbsdbslib.dll
4 ETW000 22 0.084301
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbsdbslib.dll
4 ETW000 229 0.084530
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 455 0.084985
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=39,arg_p=0000000000000000)
4 ETW000 27 0.085012
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 189 0.085201
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=000000000202F950)
4 ETW000 26 0.085227
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 14 0.085241
4 ETW000 [dev trc ,00000] New connection 0 created 15 0.085256
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 36 0.085292
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000141461DE8)
4 ETW000 34 0.085326
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 14 0.085340
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 16 0.085356
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 20 0.085376
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 40 0.085416
4 ETW000 [dev trc ,00000] { DbSlSdbConnect(con_info_p=0000000000000000) 26 0.085442
4 ETW000 [dev trc ,00000] DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.32)
4 ETW000 490 0.085932
4 ETW000 [dev trc ,00000] MAXDB shared library (dbsdbslib) patchlevels (last 10)
4 ETW000 23 0.085955
4 ETW000 [dev trc ,00000] (0.024) Default value for max. input variables is 2000 (note 655018)
4 ETW000 25 0.085980
4 ETW000 [dev trc ,00000] (0.024) Profile parameter to define max. input variables (note 655018)
4 ETW000 23 0.086003
4 ETW000 [dev trc ,00000] (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
4 ETW000 23 0.086026
4 ETW000 [dev trc ,00000] (0.024) Input parameters for SQL statements increased (note 655018)
4 ETW000 23 0.086049
4 ETW000 [dev trc ,00000] (0.018) Create index serial for MaxDB 7.6 (note 1267841)
4 ETW000 21 0.086070
4 ETW000 [dev trc ,00000] (0.018) More trace in case of packed to string conversion error (note 1262799)
4 ETW000 24 0.086094
4 ETW000 [dev trc ,00000] (0.016) R3trans export aborts with signal 6 (note 1262245)
4 ETW000 22 0.086116
4 ETW000 [dev trc ,00000] (0.009) IA64 alignment errors (note 1245982) 15 0.086131
4 ETW000 [dev trc ,00000] (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
4 ETW000 23 0.086154
4 ETW000 [dev trc ,00000] 12 0.086166
4 ETW000 [dev trc ,00000] -> init() 180 0.086346
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=14) : 0000000002678000 (30 bytes allocated)
4 ETW000 45 0.086391
4 ETW000 [dev trc ,00000] STATEMENT_CACHE_SIZE = 1000 466 0.086857
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=152000) : 0000000003E1CFD0 (152046 bytes allocated)
4 ETW000 198 0.087055
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=656000) : 0000000003E421B0 (808062 bytes allocated)
4 ETW000 30 0.087085
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=288000) : 0000000004E00080 (1096078 bytes allocated)
4 ETW000 37 0.087122
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=16144) : 0000000003EE2450 (1112238 bytes allocated)
4 ETW000 30 0.087152
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=32048) : 0000000003EE6380 (1144302 bytes allocated)
4 ETW000 29 0.087181
4 ETW000 [dev trc ,00000] -> loadClientRuntime() 515 0.087696
4 ETW000 [dev trc ,00000] Loading SQLDBC client runtime ... 18 0.087714
4 ETW000 [dev trc ,00000] SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 007-123-091-175
4 ETW000 6587 0.094301
4 ETW000 [dev trc ,00000] SQLDBC Library Version : libSQLDBC 7.6.5 BUILD 015-123-202-938
4 ETW000 55 0.094356
4 ETW000 [dev trc ,00000] SQLDBC client runtime is MaxDB 7.6.5.015 CL 202938
4 ETW000 302 0.094658
4 ETW000 [dev trc ,00000] SQLDBC supports new DECIMAL interface : 0 253 0.094911
4 ETW000 [dev trc ,00000] SQLDBC supports VARIABLE INPUT data : 1 17 0.094928
4 ETW000 [dev trc ,00000] SQLDBC supports keepAlive indicator : 0 16 0.094944
4 ETW000 [dev trc ,00000] -> getNewConnection() 14 0.094958
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=1672) : 0000000004E46750 (1145990 bytes allocated)
4 ETW000 36 0.094994
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=608) : 0000000004E4ADF0 (1146614 bytes allocated)
4 ETW000 53 0.095047
4 ETW000 [dev trc ,00000] <- getNewConnection(con_hdl=0) 44 0.095091
4 ETW000 [dev trc ,00000] -> checkEnvironment(con_hdl=0) 22 0.095113
4 ETW000 [dev trc ,00000] -> connect() 200 0.095313
4 ETW000 [dev trc ,00000] INFO : SQLOPT= -I 0 -t 0 -S SAPR3 62 0.095375
4 ETW000 [dev trc ,00000] Try to connect (DEFAULT) on connection 0 ... 63 0.095438
4 ETW000 [dbsdbsql ,00000] *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:[1] could not create comm. shared memory [5]))
4 ETW000 106621 0.202059
4 ETW000 [dev trc ,00000] -> SetSapdbCA(errcode=-10709) 20 0.202079
4 ETW000 [dev trc ,00000] -> freeConnection(con_hdl=0) 20 0.202099
4 ETW000 [dev trc ,00000] -> sdb_free(p=0000000004E4ADF0, size=608 (1145990 bytes allocated))
4 ETW000 48 0.202147
4 ETW000 [dev trc ,00000] -> sdb_free(p=0000000004E46750, size=1672 (1144302 bytes allocated))
4 ETW000 44 0.202191
4 ETW000 [dev trc ,00000] } DbSlSdbConnect(rc=99) 17 0.202208
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error -10709 performing CON [dblink#3 @ 431]
4 ETW000 8805 0.211013
4 ETW000 [dblink ,00431] ***LOG BY0=>Connection failed (RTE:[1] could not create comm. shared memory [5]) [dblink#3 @ 431]
4 ETW000 29 0.211042
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=41,arg_p=0000000140519908)
4 ETW000 315 0.211357
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 19 0.211376
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=14,arg_p=0000000002025EF0)
4 ETW000 24 0.211400
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 14 0.211414
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=50,arg_p=0000000002025FB0)
4 ETW000 24 0.211438
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 24 0.211462
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=13,arg_p=0000000002025F00)
4 ETW000 24 0.211486
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 19 0.211505
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=52,arg_p=0000000002025F50)
4 ETW000 24 0.211529
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 13 0.211542
2EETW169 no connect possible: "DBMS = ADABAS D --- DBNAME = ''"
4 ETW000 [dev trc ,00000] -> sdb_free(p=0000000002678000, size=14 (1144272 bytes allocated))
4 ETW000 10444 0.221986
Regards
Vinay -
Ubuntu Karmic authentication against Snow leopard open directory server
Hi,
I'm looking for help. I've tried to configure an installation of Karmic to authenticate against our office's open directory server running on an osx snow leopard server. Currently `getent password` show all users including those from the open directory server when running the command as both root and normal users. However authentication against the open directry users fails with the following messages in the /var/log/auth.log:-
Dec 7 22:42:05 [hostname] getent: nss_ldap: failed to bind to LDAP server ldap://server.domain.com: Invalid credentials
Dec 7 22:42:05 [hostname] getent: nss_ldap: could not search LDAP server - Server is unavailable
(I've changed the hostname and ldap url)
/etc/ldap.conf has:-
base dc=server,dc=domain,dc=com
ldap_version 3
rootbinddn cn=diradmin,dc=server,dc=domain,dc=com
bind_policy soft
pam_password md5
/etc/ldap.secret is set to the password of the diradmin user and has a permission mask of 600
/etc/pam.d/common-passwd :-
password sufficient pam_ldap.so md5
password required pam_unix.so nullok obscure md5
password optional pam_smbpass.so nullok use_authtok tryfirstpass missingok
/etc/pam.d/common-auth:-
auth [success=2 default=ignore] pam_unix.so nullok_secure
auth [success=1 default=ignore] pam_ldap.so usefirstpass
auth requisite pam_deny.so
auth required pam_permit.so
/etc/pam.d/common-account:-
account [success=2 newauthtokreqd=done default=ignore] pam_unix.so
account [success=1 default=ignore] pam_ldap.so
account requisite pam_deny.so
account required pam_permit.so
/etc/pam.d/common-session
session [default=1] pam_permit.so
session requisite pam_deny.so
session required pam_permit.so
session required pam_unix.so
session optional pam_ldap.so
session optional pamckconnector.so nox11
Does anyone have any ideas where to go from here?
Message was edited by: zebardyHi
It's easy enough to 'connect' any version of OS X Server to any other version of OS X Server. Use the Join button in the Users & Groups Preferences Pane. Alternatively use the Directory Utility itself.
You seem to be misunderstanding what an Open Directory Master and Replica are? They are not what I think you think they are. They are not a 'back-up' of each other if you're providing more than the shared Directory Service.
An OD Replica maintains a read-only copy of the LDAP Database (Usernames, Passwords and Policies etc) that's stored on the OD Master and nothing more. If the Master was to go offline for any reason the Replica can be quickly promoted to a Master Role and continue to provide information for the shared directory. This assumes it has easy and quick access to the Volume storing networked home folders? The LDAP Database in that case would then become writable. Later on and whenever you've fixed the problem with the old Master it can quickly be demoted and made a Replica of the now new Master.
Although this is for 10.6 Server (it is nevertheless still applicable) everything you need to know about Master and Replica relationships is here:
http://manuals.info.apple.com/en_US/OpenDirAdmin_v10.6.pdf
Page 55 onwards.
From Page 64:
"The Open Directory master and its replicas must use the same version of Mac OS X Server. . ."
If your OD Master is also providing Mail, Calendar and Contact Services then none of these will be replicated. You will have to maintain a backup of these databases yourself using whatever method you deem fit for your needs.
HTH?
Tony -
NLS:4: Cannot open message catalog TMADMIN_CAT, Solaris Container
Hello,
Can someone please help me ?
I have used Tuxedo 8 for many years on Solaris 8 servers, however we have now ported our installation to a Solaris 8 container on a Solaris 10 server. The server was ported using a flar image from the source server onto the new zone (or container). Tuxedo works absolutely fine in the container and the application appears to run as expected until I try using tmadmin or qmadmin on the command line and run a command in the shell and the following message appears for tmadmin, qmadmin message is similar.
NLS:4: Cannot open message catalog TMADMIN_CAT, set 1, num 111; check TUXDIR=/opt/apps/tuxedo/8.0, LANG=C
tmadmin/qmadmin performs the function but appears to be unable to open it's message catalog in $TUXDIR/locale/C
The mesasage catalog exists in $TUXDIR/locale/C and chksum's identical to source server.
I have manually re-installed the Tuxedo software in the container with no effect
I have tried installing Tuxedo in a different directory
I have tried setting NLSPATH=$TUXDIR/locale/C in the environent with no effect
The tuxedo application works fine with no similar messages in the ULOG from the running application, it is just tmadmin and qmadmin on the command line, using the same user as runs the application
localel settings are identical to original source server and :
localeLANG=
LC_CTYPE="C"
LC_NUMERIC="C"
LC_TIME="C"
LC_COLLATE="C"
LC_MONETARY="C"
LC_MESSAGES="C"
LC_ALL=
If i set $LANG = C and run tmadmin and run a command I get the following message instead
NLS:6: Message not found, catalog TMADMIN_CAT, set 1, num 1136
Which implies it can see the catalog but cannot open it
Tuxedo version is 8.0 Rolling patch 222
Can anyone help? i would be very grateful
Thanks
AdamI have now worked arround this by re-generating the message catalogs from the catalog text files
cd $TUXDIR/locale/C
gencat TMADMIN_CAT TMADMIN.text
gencat Q_CAT Q.text
tmadmin and qmadmin now display the output ok, It kind of makes sense since the catalogs are generated in the new environment, but a full install still did not work.
The new catalogs are identical to the old catalogs and cksum identically, but they work. Still scratching my head over this one, but at least we can move forward now. -
Question about active queue and related msg of Nets.Messaging server 4.15
I have Netscape Messaging Server 4.15 Patch 7 (buil
t Sep 11 2001). I see that the number of messages in active queue viewed as number of file (ls -l queue/messages | wc -l) doesn't matches with the number of messages that I see in Mailbox-deliver as showed by sendmail -bp command.
Why?
Very often number of file are few hundred, when the emulator of sendmail shows only twenty-thirty messages.
And I see that the messages in active queue (if I open them with commands like more, view...) are all for local domains on server, so mailbox-deliver.
There are sometimes a lot of messages of months ago...
Thank you very much
Best Regards
MarcoI have Netscape Messaging Server 4.15 Patch 7 (buil
t Sep 11 2001). I see that the number of messages in active queue viewed as number of file (ls -l queue/messages | wc -l) doesn't matches with the number of messages that I see in Mailbox-deliver as showed by sendmail -bp command.
Why?
Very often number of file are few hundred, when the emulator of sendmail shows only twenty-thirty messages.
And I see that the messages in active queue (if I open them with commands like more, view...) are all for local domains on server, so mailbox-deliver.
There are sometimes a lot of messages of months ago...
Thank you very much
Best Regards
Marco -
Changin installation directory of messaging server
Hello,
I have installed and configured messaging server at /opt/sun/comms/messaging64/.....
I wanted to change that to /messaging/mail1/bin directory
I stopped the messaging server
I copied all the content of messaging64/ to messaging/mail1/bin
moved messaging64 folder. I am able to do start stop for messaging. however imsrestart is giving error ....
starting dispatched serverf ld.so.1: dispatched : fatal: libimta.so: open failed: no such file or directory.
Exit code =2 (2) - IMTA_NO, basic No,......
i checked file libimta.so is there under messaging/mail1/bin/lib
I also added above path in to LD_LIBRARY_PATH and also to the path.
still getting the same error.
also checked with sh -x imsimta version
it is showing correct directories.
what other action need to be taken here?
regards,
sumantmr.chhunchha wrote:
I have installed and configured messaging server at /opt/sun/comms/messaging64/.....
I wanted to change that to /messaging/mail1/bin directoryJust for future reference you can specify the install-root by using the --installroot <path> commpkg option as per:
http://wikis.sun.com/display/CommSuite/commpkg+install+Usage
starting dispatched serverf ld.so.1: dispatched : fatal: libimta.so: open failed: no such file or directory.
what other action need to be taken here?You need to make sure that the crle values are correctly set to match the new path (run the crle command and you will see the paths I am referring to).
Regards,
Shane. -
Same command works on the server but not on the workstation
Scenario
Exchange 2010 sp3
Name Value
CLRVersion 2.0.50727.4984
BuildVersion 6.1.7600.16385
PSVersion 2.0
WSManStackVersion 2.0
PSCompatibleVersions {1.0, 2.0}
SerializationVersion 1.1.0.1
PSRemotingProtocolVersion 2.1
Worstation:
Name Value
PSVersion 4.0
WSManStackVersion 3.0
SerializationVersion 1.1.0.1
CLRVersion 4.0.30319.18063
BuildVersion 6.3.9600.16406
PSCompatibleVersions {1.0, 2.0, 3.0, 4.0}
PSRemotingProtocolVersion 2.2
I input a command from my workstation using ISE
get-exchangeserver | Where-Object {$_.IshubtransportServer -eq $True} | Get-MessageTrackingLog -Start (get-date).AddHours(-2) -Sender '[email protected]'
Error:
The input object cannot be bound to any parameters for the command either because the command does not take pipeline input or the input and its properties do not match any of the
parameters that take pipeline input.
The Exact same command from the Server works.
In my profile I have the following:
set-Location c:\
$Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri 'http://MyExchangeServer/powershell'
import-pssession $Session
Import-Module ActiveDirectory
$host.PrivateData.ErrorForegroundColor = 'green'
Clear-Host
From My Workstation:
PS C:\> Get-PSSession
Id Name ComputerName State ConfigurationName Availability
1 Session1 MyExchangeServer Opened Microsoft.Exchange Available
Why does the command work on the server but not on the workstation?
AlexisHi Tiri2014,
There are some differences between Remote PowerShell and Exchange Management Shell. You cannot use the pipeline when you run some cmdlets by using Remote PowerShell.
Here’s a link to similar case for your reference:
Error message when you try to pipe the result of a cmdlet into another cmdlet by using Remote Powershell in Office 365 dedicated: “The input object cannot be bound to any parameters
for the command”
http://support.microsoft.com/kb/2701827/en-us
Hope it helps
Best regards -
Messaging server vs Directory Server
Hi everybody,
My system have 2 server, 1 is Iplanet messaging server 5.2 P2 and the other is Directory Server 5.2. Recent days, i could not check email and when checked for error i got this :
On directory server, run command netstat -an
10.12.0.6.10389 210.245.31.25.45571 49640 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.52754 49640 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.39489 48475 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.40364 49640 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.35518 49640 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.62958 49640 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.39052 48475 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.39936 49640 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.39947 48475 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.48198 49640 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.40819 48475 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.42586 48475 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.42592 49640 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.44336 48475 0 49640 0 ESTABLISHED
Over 4000 sessions still in state ESTABLISHED (about 100 people use this mail server but not usually). So, i check the logs file (LDAP log file), i saw :
[01/Sep/2008:07:46:08 +0700] - DEBUG - conn=-1 op=-1 msgId=-1 - Listening for new connections again
[01/Sep/2008:07:46:08 +0700] - ERROR<12293> - Connection - conn=-1 op=-1 msgId=-1 - fd limit exceeded Too many open file descriptor
s - not listening on new connection
[01/Sep/2008:07:46:08 +0700] - DEBUG - conn=-1 op=-1 msgId=-1 - Listening for new connections again
[01/Sep/2008:07:46:08 +0700] - ERROR<12293> - Connection - conn=-1 op=-1 msgId=-1 - fd limit exceeded Too many open file descriptor
s - not listening on new connection
Did i reach to limitation of max-connection which this server allows ? Any ideas ?
Thanksall4ims wrote:
My system have 2 server, 1 is Iplanet messaging server 5.2 P2 and the other is Directory Server 5.2. Recent days, i could not check email and when checked for error i got this :
On directory server, run command netstat -an
10.12.0.6.10389 210.245.31.25.45571 49640 0 49640 0 ESTABLISHEDWhat application is running on 210.245.31.25 that would require so many established connections to the directory server?
Over 4000 sessions still in state ESTABLISHED (about 100 people use this mail server but not usually). So, i check the logs file (LDAP log file), i saw :
[01/Sep/2008:07:46:08 +0700] - DEBUG - conn=-1 op=-1 msgId=-1 - Listening for new connections again
[01/Sep/2008:07:46:08 +0700] - ERROR<12293> - Connection - conn=-1 op=-1 msgId=-1 - fd limit exceeded Too many open file descriptor
s - not listening on new connection
[01/Sep/2008:07:46:08 +0700] - DEBUG - conn=-1 op=-1 msgId=-1 - Listening for new connections again
[01/Sep/2008:07:46:08 +0700] - ERROR<12293> - Connection - conn=-1 op=-1 msgId=-1 - fd limit exceeded Too many open file descriptor
s - not listening on new connection
Did i reach to limitation of max-connection which this server allows ? Any ideas ?You hit the maximum file-descriptor limit as the error points out. Remember that each TCP network connection consumes a file-descriptor.
At this point you have a few options:
1) Try to determine why there are so many active connections from the system 210.245.31.25 to the LDAP server and reduce them (e.g. restart the application holding open the connections, fix the application).
2) Increase the maximum number of file-descriptors for the system to allow for additional connections -- although this may just delay the problem from re-occurring if you don't address (1).
3) Restart the Directory Server to close the established connections. This is a short-term fix only.
Regards,
Shane.
Maybe you are looking for
-
Short dump in report CLEAN_REQREQ_UP
Hi, I'm in classic scenario with SRM 5.5 . I've created a PO in backend and when I run this report, a short dump appears Have anybody any idea? Thanks in advance Best Regards
-
How i can check new storage after i add it, specially LDAP storage
Hi Thank you for reading my post. is there any way that i can check whether new storages are configured correcyly inside sun access manager 7 or not? for example I have an LDAP storage and i want to check whether i have add it correctly or not. thank
-
Hi all Do any one give me the code to make the object in the tree node as link to navigate to another page, Note:Onmouseover alone the object gets the link and I need to get the hand symbol reg balaji
-
Viewing plot files in Forms 6i
Please can someone give us some guidance on viewing Autocad plot files (.plt extension). We are able to view TIF versions of the files, but is there an option somewhere to add in different file types which are not in the standard image format list? M
-
Create "seamless steel pipe" border ???
I'm a real newb on Illustrator - I want to create a border for export to Flash Catalyst that looks like a continuous steel pipe with rounded corners. I've tried several things and looked all over for examples. It seems that I need to create 2 rectang