Command To Run The PHP Error Files

Nothing I've found is working.
Does anyone know what the command is?
Thank you.

MJN1812 wrote:
Nothing I've found is working.
Does anyone know what the command is?
Unless I don't understand what a "PHP error file" is, your topic post makes it seem that you feel the "PHP error files" are executable, which is presumably not the case. Please describe in more detail what you really want to do.

Similar Messages

  • Get these two error messages when I run the iTunes exe file:  Error 2 and Error 2 (Windows error 2).  Both say Apple Application Support is required.  Uninstalled and tried to install again several times.  Using Windows 7 64 bit on laptop.

    Trying to install iTunes on my Dell laptop with Windows 7 - 64 bit.  Get these two error messages when I run the iTunes exe file:  Error 2 and Error 2 (Windows error 2).  Both say Apple Application Support was not found.  Can anyone tell me why this is happening?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Error when trying to run the rcu.bat file as part of OBIEE 11g installation

    when trying to run the rcu.bat file as part of OBIEE 11g installation on windows 7 64 bit I am getting the following error
    "windows cannot find C:\Users\manoj\Desktop\Oracle.Make sure you typed the name correctly, and then try again".
    Please help me how to overcome this error, I am not able to understand why it is looking for C:\Users\manoj\Desktop\Oracle.
    Thanks
    Manoj

    after setting the ORACLE_HOME and Path environment variables also....I am still getting the same error...so is it like RCU can be run only on windows 7 32-bit machines and it does not work on 64-bit machines? and also it seems like the previous versions of OBIEE 10.1.3.X does not support windows 7 64-bit machines...
    please help me finding a solution to this error....
    and what are all the versions of OBIEE can be installed on windows 7 64-bit machines?
    can't we install OBIEE 11g on windows 7 64-bit machines without including RCU?
    thanks
    Manoj
    Edited by: mkumar on Jun 2, 2011 3:47 AM

  • When updating iTunes to 11.4 I get the following error:  "Files Shared by these updates" has an invalid signature. It will not be installed. Running Windows 7 64-bit.

    When updating iTunes to 11.4 I get the following error:  "Files Shared by these updates" has an invalid signature. It will not be installed. Running Windows 7 64-bit.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Cannot run the bcp_extract.bat  file OMWB created

    Hello Everyone,
    I am working on transferring data offline using the OMWB.
    In OMWB ORACLE Model pane, i selected a user schema object, a table, and i chose Object<Generate SQL*Loader script.
    Now that i was able to find my bcp_extract.bat file, i copied the contents of the directory where OMWB generated the data unload scripts onto the computer that my source database, SQL SERVER 7, is installed.
    Per OMWB documentation, I modified the bcp_extract.bat file to include the source database Server Name. And I did remove the angle brackets as well. I double clicked the bcp_extract.bat file and a command window poped up and went down immediately. No data file was generated nor anything was added to the sql_load_script.bat file in the Oracle directory that was creatd by the Generate SQL*Loader Scripts.
    Is there any other information that i need to modify/add in order to be able to run the bcp_extract.bat file. In fact, i thought about adding the password after -P switch and see if i can run the file, but after adding the password i still could not get the bcp_extract.bat file running.
    I appreciate if someone can help me out to get the bcp_extract.bat file running.
    Thank you so much!
    Mitra

    Hello Everyone,
    I am working on transferring data offline using the OMWB.
    In OMWB ORACLE Model pane, i selected a user schema object, a table, and i chose Object<Generate SQL*Loader script.
    Now that i was able to find my bcp_extract.bat file, i copied the contents of the directory where OMWB generated the data unload scripts onto the computer that my source database, SQL SERVER 7, is installed.
    Per OMWB documentation, I modified the bcp_extract.bat file to include the source database Server Name. And I did remove the angle brackets as well. I double clicked the bcp_extract.bat file and a command window poped up and went down immediately. No data file was generated nor anything was added to the sql_load_script.bat file in the Oracle directory that was creatd by the Generate SQL*Loader Scripts.
    Is there any other information that i need to modify/add in order to be able to run the bcp_extract.bat file. In fact, i thought about adding the password after -P switch and see if i can run the file, but after adding the password i still could not get the bcp_extract.bat file running.
    I appreciate if someone can help me out to get the bcp_extract.bat file running.
    Thank you so much!
    Mitra

  • Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.

    Hi!
    We have 5 Exchange 2013 servers and when I’m trying to run a script that includes the cmd-let Get-MessageTrackinglog with StartDate = the first of the month and with EndDate = the end of the month I get the following error message after
    a couple of hours. The script is run on the server SERVER01 and goes through the Message Tracking logs of all Exchange servers. I have tried the script on other servers and get the same result.
    Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.
    [Server=SERVER01, TimeStamp = 918/2014 19:32:34]
    For more information, see the about_Remote_Troubleshooting Help topic.
        + CategoryInfo         
    : OperationStopped: (server01.domain.com:String) [], PSRemotingTransportException
        + FullyQualifiedErrorId : JobFailure
        + PSComputerName       
    : server01.domain.com
    I have gone through “about_Remote_Troubleshooting Help topic”, but can’t find anything related to my issue. There is nothing in the Application or the Windows PowerShell log either.
    /Henrik

    Hi Henado 
    Check the time on your Exchange server(s) relative to the DCs and ensure they are in correct sync
    Use another account which is assigned the Organization Management permission and log to to the server run the command in shell and see the results
    Run 
    Add-PSSnapin -Name Microsoft.Exchange.Management.PowerShell.E2010
    Set-Adserversettings -ViewEntireForest $True and then run message tracking command and see the results
    If none of the above helps you may need to remove and re-install the WinRM and see the results
    Good Luck :)
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

  • My computer won't let me run the setup.exe file. I am an admin I've run as admin and I've downloaded many times. I just reformatted my computer and now it won't work.

    My computer won't let me run the setup.exe file. I am an admin I've run as admin and I've downloaded many times. I just reformatted my computer and now it won't work.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808http://support.apple.com/kb/ht1808
     Cheers, Tom

  • How to run the emca batch file

    Hello,
    I would just like to know how to run the emca batch file for a single test database on my PC with SID = ORCL1.
    Hope someone can help me.
    Thanks!

    Hi
    If you mean running EMCA as batch file and test something.
    I think the best way is to write OS level script to handle this

  • How to run the Main.kon file ?

    Hi
    I have Downloaded and Installed
    SAP Widget Foundation.
    I am trying to Create the HelloWorld Widget.
    I have Written the Main.kon file
    as described in the tutorial.
    But how to run the Main.kon file ?
    Regards
    Rajendra

    hi,
    check whether you have installed yahoo widget engine...
    Then right-click on the main.kon and choose run..
    thanks
    jaideep

  • Exception while running the jcwde.app file

    Hi,
    I have a class which implements ToolkitInterface,ToolkitConstants interfaces (public class HelloWorld extends Applet implements ToolkitInterface,ToolkitConstants {.........} ). I have done following things now,
    1) create a classes directory and copy the required api_export_files to it.
    2) Compile the classes.
    3) Conver classes to .cap, .exp, and .jca ( call %JC_HOME%\bin\converter -config ..\src\ToolkitAppletExample\HelloWorld.opt ) - Successfully files created
    4) Create a scr file ( call %JC_HOME%\bin\scriptgen -o hello.scr ..\..\..\classes\ToolkitAppletExample\javacard\ToolkitAppletExample.cap ) - Successfully files created
    5) Then create a jcwde.app as follows,
    //applet                              AID
    com.sun.javacard.installer.InstallerApplet     0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0x8:0x1
    ToolkitAppletExample.HelloWorld                     0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x6:0x1
    6) Run the jcwde ( jcwde jcwde.app )
    then it will gives the following errror,
    Java Card 2.2.1 Workstation Development Environment, Version 1.3
    Copyright 2003 Sun Microsystems, Inc. All rights reserved. Use is subject to lic
    ense terms.
    jcwde is listening for T=0 Apdu's on TCP/IP port 9,025.
    Exception in thread "main" java.lang.NoClassDefFoundError: sim/toolkit/ToolkitIn
    terface
    at java.lang.ClassLoader.defineClass0(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
    at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:12
    3)
    at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
    at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
    at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:141)
    at com.sun.javacard.jcwde.MaskedApplets.getInstallInstance(MaskedApplets
    .java:307)
    at com.sun.javacard.jcwde.MaskedApplets.getAppInstallMethod(MaskedApplet
    s.java:288)
    at com.sun.javacard.jcwde.MaskedApplets$TempPkgTableEntry.addToPackageTa
    ble(MaskedApplets.java:384)
    at com.sun.javacard.jcwde.MaskedApplets.readConfigFile(MaskedApplets.jav
    a:110)
    at com.sun.javacard.jcwde.Main.<init>(Main.java:57)
    at com.sun.javacard.jcwde.Main.main(Main.java:129)
    So what would be the reason?
    Do I need to add AID for ToolkitInterface,ToolkitConstants classes in the jcwde.app file? If so how can I find the AIDs of those classes?
    Really appreciate for any help.
    Thank you.
    Thilina.

    The only time I've really seen this error occur is during application development when a webapp is deployed/undeployed multiple times.
    When this is the case, it's usually a memory leak of some sort (example: the webapp classloader is being retained somewhere when it shouldn't be).
    As a work around you can increase the size the PermGen space.

  • How to run the deployed java file

    Hi friends
    please guide me hoe to run the deployed Java class file on the machine on which the java sdk is not installed please tell me also the it is necessary to change environment variables
    becoz i have created one small package & i want to deploy & capable to work it on machine on which there is no java SDK is installed

    Does your application have a GUI (e.g. Swing or AWT)? Can you distribute it from a web site?

  • Where is the php config file?

    where does os x 10.4.6 keep the php.ini (configuration) file for it's preinstalled php api?

    i wouldnt go messing with the system php install... install a new one in /usr/local and mess with that if you need some customization. that way youre not put in a situation where you have to try to patch things back or reinstall. Not that backing up an restoring a simple ini is all that involved but you never know what it may lead to

  • HT1926 I a m unable to install and run the lates - Error 7()Windows error 1114)t version of iTunes. I keep getting a rruntime error - R6034 and a windows error

    I am unable to install and run  the latest version ot iTunes. Getting "Runtime error - R6034. An application has made an attempt to load the C runtime library incorrectly"
    Error 7(Windows error 1114)

    Try and not duplicate these issues and do a search next time.
    Now load https://discussions.apple.com/thread/5826672?start=0&tstart=0
    and that Topic has the correct information to fix this problem.
    Regards
    pcbugfixer

  • How run the simple .jsp file on 9 i as application server?

    hi,
    i developed simple .jsp file on notepad,the same .jsp file to run in 9ias server?
    how can any one help me or send steps how to do?
    jpullareddy

    Hi,
    Try out these samples...
    http://otn.oracle.com/sample_code/tech/java/jsp/htdocs/jspdemo/OjspReadme.html
    Thanks,
    Rajat

  • Modifying the System Error file in portal

    hi experts,
    i have DMS to Km Connector BP Deployed.its working fine
    when there is no user mapping for the dms system it throws System Error: with screen
    System Error :
    An exception occurred during the program execution. Below you will find technical information pertaining to this exception that you might want to forward to your system administrator.
    Exception Class:  <input field>
    Exception Message:  <input field>
    Details -->this is button
    My Requirement:
    i want to change this standard error screen text with custom message
    how can i achive this.
    if i need to change any par/.sca file
    where exactly i can find this file
    what is the screen needs to be changed
    Pls let me now the Location of System Error File Location
    regards,
    vani

    Hi,
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/ee4f58ff1bce41b4dc6d2612fae211/frameset.htm
    and More here..
    Problem with system.log
    Regards,
    N.

Maybe you are looking for