Command to temporarily change login window to require username and password

Is there a command to temporarily change the login in window from the little bubble where you select your user to having you type in both the username and password? If not, is there a way to switch user accounts, like in fast user switching, through terminal?

Hi Maitreyee,
I picked up the incident you set up with this question, and responded there, but just saw that you had asked the question here as well (which is a good idea).
This is the feedback I provided in the incident, so I'm not sure if you want to get feedback from someone else, but the answer is:
In order to change the ID's and Passwords for those service accounts you will have to uninstall and reinstall BPC with the new accounts. There is really no way to make that kind of change maunually in our system as there are too many backend pieces that use those accounts.
Also, you'll need to make sure before reinstalling that the new accounts have the correct permissions per the installation document.
Thank you,
Dan

Similar Messages

Lately I have been getting a rectangular screen titled Login Setting, with my Username and Password and asking me to Login. This screen shows up on opening the computer and has never been seen before the last month or so.

Lately I have been getting a rectangular screen titled Login Setting, with my Username and Password and asking me to Login. This screen shows up on opening the computer and has never been seen before the last month or so. It has one box titled Login Credentials with a username and password field and a second box titled Login Status at the bottom where it says "Profile not found" in red. I've never seen this before and ignoring it does not effect any operations. Is this legitimate or some kind of identity fishing?

Hello,
Have you done the recent Security updates?
Is this from Sleep or on bootup?
Timing is about right for the FlashBack attack.
Disable Java in your Browser settings, not JavaScript.
http://support.apple.com/kb/HT5241?viewlocale=en_US
http://support.google.com/chrome/bin/answer.py?hl=en-GB&answer=142064
http://support.mozilla.org/en-US/kb/How%20to%20turn%20off%20Java%20applets
Flashback - Detect and remove the uprising Mac OS X Trojan...
http://www.mac-and-i.net/2012/04/flashback-detect-and-remove-uprising.html
In order to avoid detection, the installer will first look for the presence of some antivirus tools and other utilities that might be present on a power user's system, which according to F-Secure include the following:
/Library/Little Snitch
/Developer/Applications/Xcode.app/Contents/MacOS/Xcode
/Applications/VirusBarrier X6.app
/Applications/iAntiVirus/iAntiVirus.app
/Applications/avast!.app
/Applications/ClamXav.app
/Applications/HTTPScoop.app
/Applications/Packet Peeper.app
If these tools are found, then the malware deletes itself in an attempt to prevent detection by those who have the means and capability to do so. Many malware programs use this behavior, as was seen in others such as the Tsunami malware bot.
http://reviews.cnet.com/8301-13727_7-57410096-263/how-to-remove-the-flashback-ma lware-from-os-x/
http://x704.net/bbs/viewtopic.php?f=8&t=5844&p=70660#p70660
The most current flashback removal instructions are F-Secure's Trojan-Downloader:OSX/Flashback.K.
https://www.securelist.com/en/blog/208193454/Flashfake_Removal_Tool_and_online_c hecking_site
More bad news...
https://www.securelist.com/en/blog/208193467/SabPub_Mac_OS_X_Backdoor_Java_Explo its_Targeted_Attacks_and_Possible_APT_link

TS1702 How do change the old Apple ID username and password to the updated username and password for the apps store?

How do you change the old Apple ID username and password to the updated username and password in order to get updated apps from the app store?

cbkitche wrote:
How do you change the old Apple ID username and password to the updated username and password in order to get updated apps from the app store?
Do you mean you kept the same account but you only updated your AppleID?
Just log out and log back in with new ID.
Note that the AppleID is embedded into the item at purchase and cannot be changed.
However, when you change your AppleID, it will link the old account name to the new account name so you will not have any problems updating apps using the new AppleID.

Require username and password

How can I require username and password to access a page on my Muse site

Hi orduncan,
you will need to create a secure zone in Business Catalyst. You can do this under Site Manager > Secure Zones. You can find more information on how to do it in detail here: http://kb.worldsecuresystems.com/164/bc_1647.html
Nicole - BCGurus.com | http://bcgurus.com/Business-Catalyst-Templates for only $7

I can't access sites that require username and password since 4.3 update

Since updating to IOS 4.3, I can't access bookmarked sites that require username and password. I can still get on sites that don't require it. Help please...

Have you tried the standard fix of resetting your iPad?
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

How do i open a protected pdf that requires username and password in side the pdf itself?

Hi,
I bought this pdf from SABS South Africa, the file contains the electrical unit standards and I cant walk around with my laptop all the time. The PDF has a username and password field on page 6, which connects directly to SABS website to be able to unlock from page 6 to 397. Why cant i type into the username and password fields on my mobile??
Regards,
Christo

Hi,
Is the PDF document "protectedPDF" by Vitrium?
Currently, Acrobat DC mobile products (for iOS and Android) do not support PDF documents with DRM (Digital Rights Management) by third-parties.
I am not aware of any other free mobile apps that support "protectedPDF" documents.
I'd recommend using the desktop version of Reader on a Windows or Mac computer to view the PDF documents. Sorry for the inconvenience.

I changed the code for saving usernames and passwords, it didn't work, so I restored a backup of the code I had made, now usernames and passwords don't work at all. Help?

I found a method online to force firefox to save usernames and passwords which the site itself requested not to be saved. I made a backup of the file on my hard drive, moved it to the desktop, changed the code and tried it. It didn't work as expected so, I deleted that file, returned the original file to it's appropriate place and restarted firefox. Now it won't save ANY passwords or user names, even on sites it previously did so. I've tried reinstalling over the existing copy, and would REALLY prefer not to uninstall/reinstall since I have a ton of bookmarks, addons etc, which I don't want to have to restore. Has anyone encountered this issue? or have a suggestion on how to fix it?

Do you still see names and passwords in the Password Manager?
Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
You can still reinstall Firefox. Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected.
See also http://kb.mozillazine.org/Password_Manager (Troubleshooting)

CANNOT CONNECT TO WIFI THROUGH IPOD TOUCH 4G..ROUTER REQUIRES USERNAME AND PASSWORD..HELP NEEDED

i have a ipod touch 4g...and my router requires WEP key and a username and a password when i connect to it through my laptop..ipod touch only asks for a password i.e. the WEP key..question is how to enter the username and the password in ipod touch?

my service provider has provided me with a username and a password..therefore my router is "NOT ALWAYS CONNECTED TO THE INTERNET"..also PPPoE is enabled...
i think i ll have to call the ISP and tell him to remove the username and password...because i dont think that ipod has a provision for entering passwords other than the WEP key..

How to create a login funtion with different usernames and password to iweb

Hi,
Im looking for hours for a solution to create / add a function to iweb which allows users to login to a member area with their own user names and passwords.
Is there a simple way to realize this? So far I know there has to be a file with all the user name --> password combinations, can I add such a file to my idisk and then get it working with my iweb site?
Is such an idea in general possible with iweb?
Thanks for your help!
Message was edited by: Macusar08

One possibility may be to use the free drop.io to privately share links to your iWeb site pages and/or iDisk files. +"Each 'drop' (...) can be password-protected and set to expire after a period of time, so you can share exactly what you want with whom you want for as long as you want."+ (source).
Note that drop.io doesn't require an email address, name or personal registration to set up a "drop". And you can place data in either one drop or multiple drops. Each drop comes with 100mb of storage for free and you can have as many drops as you want without signing up.

Yosemite, require username and password at login

Hello
I can't seem to change the login to REQUIRE you to write a username, it will only show a list of users.
Has this being remove in Yosemite?
Thanks

Thanks for the reply.
I see the options too, have you tested the name & password option. On my macbook air, enabled or not, i still get a list.
Thanks

Design login form for user username and password

any body can help me??
in login button i wrot this code
DECLARE
     V_USER VARCHAR2(20);
V_PASS VARCHAR2(20);
BEGIN
     ---check the user name ---
     if :ADMUSER_USER_NAME is not null and :ADMUSER_PASSWORD is not null then
SELECT ADMUSER_USER_NAME
INTO V_USER
FROM ADMUSER011
WHERE ADMUSER_ID_PK = :ADMUSER_ID_PK;
IF V_USER <> 0 THEN ---it mean this user is available---
---check the user password ---
SELECT COUNT(ADMUSER_PASSWORD)
INTO V_PASS
FROM ADMUSER011
WHERE ADMUSER_USER_NAME = :ADMUSER_USER_NAME
and ADMUSER_PASSWORD = :ADMUSER_PASSWORD;
IF V_PASS = 0 THEN
     MESSAGE('Invalid User Name');
     MESSAGE('Invalid User Name');
     clear_message;
     raise form_trigger_failure;
else
     open_form('next_form');
end if;
end if;
end if;
end;

any body can help me??For What?
To write again your code? Because there is a error| What is it?
Anyway, here is that.
DECLARE
    userexist NUMBER(4) :=0;
BEGIN
---check the user name ---
if :ADMUSER_USER_NAME is not null and :ADMUSER_PASSWORD is not null then
     SELECT count(*)
     INTO userexist
     FROM ADMUSER011
     WHERE ADMUSER_ID_PK    = :ADMUSER_ID_PK;
        and ADMUSER_USER_NAME = :ADMUSER_USER_NAME
     and ADMUSER_PASSWORD = :ADMUSER_PASSWORD;
    if userexist = 0 then
     MESSAGE('Invalid User Name');
     MESSAGE(' ');
     raise form_trigger_failure;
    else
     open_form('next_form');
    end if;
end if;
end;

Username and password for Windows doesn't work for Safari

I just installed Safari 3.0.3 for windows under WindowsXP on local machine. But I have problem access local IIS.
Here is what I did:
1. type http://localhost in Safari
2. I get a pop up login window says "To view this page, you need to log in to area localhost on localhost:80",
3. I entered my username and password to Windows, then "Enter"
4. The pop up window comes back, it says "the name and password entered for are localhost on localhost:80 is incorrect."
I don't see this problem in IE or Firefox on the same machine. In Firefox, it pops a similar window ask for username and password, I entered the same username and password to Windows, it works. But in Safari, it doesn't.
I am wondering if anyone knows how to solve this problem. thanks.

Hi,
i've couple of ideas that might help...
1:
just wandering are either of you guys accessing the internet via a proxy server? if so i suspect that Safari is not by bypassing local addresses and hitting the proxy server first.
if this is the case, Safari should respect the same settings that IE does, so try setting IE and/or FF to bypass the proxy for local address/servers - and see if Safari now works...
2:
also, the text box that ask's you for your password, does it say on it somewhere, something like, "password will be sent clear" or "password will be sent encrypted"
i seem to get a similar problem, but with accessing our work ISA server, my localhost is fine btw. Anyway it might be the case the safari is trying to send a clear text password to an encrpyted password request or vica-verca (sp?) - soooo try setting your IIS to accept clear/basic authentation as well at NT Auth/Encrypted
ok, hope that helps, and make sense

How can I change the admin username and password

how can I change the default admin adminadmin username and password for the server

What version of Creator are you use?
In Creator 2 Update 1, using Application Server version 8.2, you can do the following..
1) Log into the Admin Console using the default UID/PWD
2) Expand the tree view by following this path:
Application Server > Configuration > Security > Realms > admin-realm
3) Click on "Manage Users"
4) Click on the UserID "admin"
5) enter the new password that you would like
6) Click on the "Save" button on the upper right side of the page.
That should do it for you.
Good luck

I changed my Adobe user ID when we changed from Windows PC to Mac and now I am unable to read previously downloaded ebooks on my Sony Reader device due to Digital Rights Management. Can I resolve this?

I changed my Adobe user ID when we changed from Windows PC to Mac and now I am unable to read previously downloaded ebooks on my Sony Reader device due to Digital Rights Management. Any ideas how I can get access to these now?

Hi Blotontheland,
Thanks for the prompt reply. The interesting thing is that my Macbook Pro was upgraded today to Yosemite and I still have the spinning wheel on the start up screen before the login page comes up.

I cant get my iphone 4 tolog in to my company wifi. i updated to ios 6 and now it just goes to my companies login screen. i enter my username and password and it just sticks. however it will logon to wifi without a requirement for a user name and password

I have to log onto my companies wifi by first going thru a log on page that equires a username and password. before i updated to ios 6. it worked fine now it just goes to the login page and when i hit enter it doesnt do anything just stays stuck on that page. however the phone will log onto a regular wifi router that doesnt require any kind of username or password. any ideas on how to fix it. i have tried everything including reseting all network settings.

1. Settings>General>Reset>Reset Network Settings
or
2. Use "Forget This Network"

Command to temporarily change login window to require username and password

Similar Messages

Maybe you are looking for