Command z doesn´t work on pages and other issues

Hi, I have a problem… I accidentally changed a table from inline to floating and IT DISSAPEARED!!.. sooo… I tried to undo mi mistake and cmd Z didn´t worked… sooo… I tried to do a new table and I couldn´t create a new one.
I restarted pages… Nothing...
I restarted my macbook… nothing...
I don´t know what else to do!!! help!!!
BTW: I have a late 2011 macbook pro with OS X Lion 10.7.5 with Pages`09 v 4.3
Thank you!!!

Try opening the file and reverting to a previous version.
From memory in Lion you did that by command clicking up near the name of the file near the top of the window.
You probably didn't lose the table, just caused it to pop over and off the page because it didn't fit.
Peter

Similar Messages

Folder redirection doesn't work in DOS and other apps

We are redirecting my documents and some other locations.
If I open a dos window and cd c:\users\username\documents it does to a local directory not the redirected location. I can browse that same path in explorer. it seems to only be when I use the library and shortcuts in a "open" dialog that I see the folder redirection location.
A new application we are using saves the config file to "my docs\application\session"
I've saved the config file to the redirect my docs\application\session, but the application doesn't pull up with the config. I'm guessing its not using the correct environment variable to look for the config file. What is the correct environment variable that would recognize redirected folders?
thanks,jb
This topic first appeared in the Spiceworks Community

I'm having the same problem. It just started yesterday. My top row buttons were not working in SMS and Loopt. I did a reset. I did a restore. I removed all applications and restored to original factory settings and did not put my backed up information back on- still he same issue. The "messages" and "clear" buttons do not respond in SMS, but the screen responds in that location in all other applications and on the home screen. It definitely seems to be a software issue and not the screen itself.

SMB under 10.7.6 doesn't work with Lexmark and others

I understand that Apple has changed SMB -- and it is not incompatible with lots of applications and devices (e.g. Lexmark scanners than scan to Mac). Short of going back to Snow Leopard, is there a way to get the "old" SMB to replace the 10.7.6 SMB -- or is there a prayer that Apple will "fix" this problem?
Thanks,
Jim

You must configure the destination path through the Lexmark printer web page.
http://www.lexmark.com/publications/pdfs/2007/x560/v8752703_en.pdf
Page 78, "Creating an FTP address using the Embedded Web Server"
At 6.d
If the FTP server requires you to log in, enter the name and password in the appropriate fields
Let's say
Username Jim
Password jimpassword
At 6.e
If you want to use, for example, a folder called Scanner inside your Pictures folder, into server path field type
Pictures/Scanner
If you leave it blank, scanned image goes to your home folder

Telephone Number Links no longer work...and other issues

I received the 2.3.3, 4.5.608.A956, update a few feeks ago and since then I have noticed reduced functionality and after combing these forums and Motorola's forums I am curious if I am alone in these findings.
One) Before the update if I looked something up in Google or an app presented a phone number I could tap it and the phone would switch to the phone controls and would dial the number. Not anymore! Now if I tap a phone number the phone controls open but the number is not in the dial window.
Two) If you use the Motorola widget, Contact quick tasks, and have them displayed on one of your home screens and you use the physical keyboard, causing the screen to rotate 90 degrees, they get blurry! That's right the text is blurry on the screen. It overlays the text on top of itself twice but slightly offset so it looks blurry.
Anyone else seeing anything like this?

Give this a try Guys it should help some b33
Here is How you Clear the system Cache on the Bionic : Do as Follows
Step 1: power your bionic down
Step 2: hold volume up, down, and power simultaneously
Step 3: use the volume down to navigate to "recovery," use volume up to select
Step 4: you will get a screen with a triangle with an exclamation point, next to an Android. Press volume up and down simultaneously
Step 5: use the volume rocker to navigate to "wipe cache" and use the power button to select.
Step 6: after it has finished, use the volume rocker to navigate to "reboot system now" and use the power button to select.
You Can also Try a: Soft Reset
Here's How to perform a Soft Reset For your Bionic : b33
Soft Reset - DROID BIONIC by Motorola
A soft reset is the most useful tool for resolving a variety of issues. In most cases, a soft reset will not affect data on the device, unless the battery is very low.
If the device doesn't respond to input, remove then re-insert the battery.
Press and hold the Power button.
Select Power off.
Press and hold the Power button to power the device on.

HT1338 I'm trying to print a document fro safari and the print command is at the bottom of the page and not visible. I can't move it up and the print command shortcut doesn't work. How do I print this document.

I'm trying to print a document from safari and the print command is at the bottom of the page and I can't move it up. The print command shortcut doesn't work and I would like to know how I can print this document.

Why do we have to install 2 add ins for something that should be built in? Please add this to the next version or an update to this one even. We should see the full path of a bookmark when we search for it. Show Parent Folder alone isn't enough if you have sub folders, so I installed Go Parent Folder as well in case of sub folders.

I upgraded my iMac to 10.9.4. Now the feature where you can go to 4 diff. screens (Command+Control) doesn't work. How do I fix this?

I upgraded my iMac to 10.9.4. Now the feature where you can go to 4 diff. screens (Command+Control) doesn't work.
How do I fix this?

Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Working with Pages and Word-questions!

NOTE: Sorry for the similarity of this to my post a few minutes ago titled "Which do I use, Pages or Word)? I learned some things through experimentation and have created subtler and more challenging questions for you.
Help me out here (please). I am now working with Pages, sharing documents with dozens of behind the times colleagues who are using some old program called "Word." It's my job to work with these people and I'm trying to make it as easy for everyone as possible.
Do I have this right? When I create a document (or open an old Word document into pages), in order to be able to share it with people, I save it, and check the box to save a copy in Word format. Then when I send my documents, it works like a charm. Yes?
If I start by opening a Word document, and every time I save I check "save copy to Word," I end up with only one document, no version in Pages. If I start with a Pages document, or save without checking the box, I end up with two separate versions of the document (like when I create a pdf)? It appears that if I I want to keep working in the Word format, every time I save it will give me a dialog box and make me check the box (and possibly select my location). This is cumbersome since I am now in the habit of saving often (you learn that when you work with Word for the Mac for any period of time--bomb, bomb, bomb). So, an I correct in assuming that if I want to save regularly, I really have to work in Pages, and then be scrupulous about saving into Word when I'm done for the day, or just before I send? It's sort of a pain in the butt, although I can learn to do it--I just want to make sure I'm not missing something here. Also, is there an autosave function so I don't have to rely on my discipline? Or does it never ever bomb?
What happens if I open the Word version and make changes to it? Do I have to do something differently to make sure I have both versions identical? Am I better off always to open the Pages document to work on, then save and send?
Do I always then have two versions of the same document (like I would if I did this same thing with pdf)?
How do I make sure that the Word version is always up to date since that is the one I am sending to colleagues? Do I always have to save and check the box, and then select the correct document to send?
I do see that when sending a single document I can easily send it while I am in the document itself. When I do this, selecting to send it as a Word document (or a pdf for that matter), will it send the version I most recently saved, or the version that is on my screen (if I forgot to save changes)?
FInally, I'd be open to any tips from people working regularly with others who must use Word. I want it to work as simply as possible, but want to set up some good habits from the beginning.
Finally, finally, have you had problems with compatibility. I have to say that there have been very few Word document yet that I've opened that I haven't gotten a message that says that Pages doesn't support some aspect of the document and formatting is removed, or spacing is different, etc. The most common is that "paragraph borders operate differently so all borders except outside borders have been removed." I'm a bit nervous about this--will I be getting documents from others that I can't trust? Will I have to ask them to send a pdf as well so I can confirm that I got it right? Can anyone ease my mind? Or am I living in reality?
Thanks a million!
EagerLearner
Message was edited by: eagerlearner

Well yes they are not the same program so there will be differences.
For example Pages only allows a border all the way around a paragraph with few options on the style of line, which is why you got the warning.
A workflow would consist of you doing your work in Pages however you like it and when you have finished and saved, making a Word copy which you despatch to your colleagues and then throw away.
Of course this is more cumbersome than sticking with MsWord which is another option. You choose. It comes down to whether or not you have to tightly conform and interact with Word users. Maybe Pages is not for you, or even NeoOfffice which is a clone of MsOffice.
Test it. If it works and you like it stick with whatever solution works for you.

Right-Command Key doesn't work

Well, on my PowerBook G4, there are 2 command-keys (I'm sure that's common).
My right command key doesn't work what-so-ever. I tried using the keyboard viewer and it doesn't turn gray either. Funny thing, but when I press the LEFT one, both cmd keys turn gray.
Well i dont know if its a missing driver or a setting, (maybe even a malfunctioning keyboard?) but if anyone can help I would appreciate it. Thanks.

Sorry, my bad. Haven't read through it in awhile and thought it affected keyboard too, but looks like just trackpad and other issues described. You may just have a bad keyboard or something lodged under that key.

Command key doesn't work in several usual function.

command key doesn't work in several usual function.
Selected object does't change to transform mode by hold down command.
and "command+2= lock the selected object " doesnt work as well..
but, these shortcut is still ok.
command + c,v
command + a
command + select tool = whole select tool
that is, the command key is not totally stopped.
Im cs5 but I have had this trouble in cs4.

causiu,
It is possible that the issues may be caused by preference corruption or interference from other applications.
You may try the following (you may have tried/done some of them already) and see whether it helps. Since you had it in CS4 too, the most likely is 5).
1) Close down Illy and open again;
2) Restart the computer;
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (irreversible);
4) Move the folder with Illy closed (reversible);
5) Look through and try out the relevant among the Other options, especially Item 7) with the usual suspects;
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Command + f2 doesn't work!

Hi!
Sorry for my english... but i try to explain my problem!
I have an iMac27, two months ago i have bought a Dr. Bott for playing with my ps3. Ok, all works fine!
Two weeks ago i came back from my holiday, i try to play but "command + f2" doesn't work!
The problem is that it seems that command doesn't work because my mac doesn't try to seach any external signal... simply it do nothing! If i try "command + f1" or "command + f3", for example... they work!
Can you help me!? My OS version is 10.6.4!
Please, help me! Winter is coming and i have to play a lot!!!! :-D

No, I'm suggesting that you test the ⌘F2 shortcut on something else, like Exposé (⇪). This is just to make sure that your keys aren't busted (or you could also just try using a different keyboard). If ⌘F2 works for Exposé, then go ahead and remove it from the Keyboard Settings to make sure your Dr Bott Video Link can use it again.
As for checking why you're not able to receive a signal, are you sure you're using 720p from your PS3? Did you try using the HDMI cable on other devices (maybe connect your PS3 to an HDTV) to make sure it's not broken? This may sound obvious, but did you also check to make sure your Dr Bott is powered up (it might be dead; I dunno)?

HT5622 The Game Center used to work with my Apple ID before I updated to iOS 7.4, I used to play multiple player with EA Real Racing 3 game but it doesn't work at all and every time I tried to go to the Game Center it's just blank, even to the settings no

The Game Center used to work with my Apple ID before I updated to iOS 7.4, I used to play multiple player with EA Real Racing 3 game but it doesn't work at all and every time I tried to go to the Game Center it's just blank, even to the settings nothing!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Game Center and sign out and sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

I can not get Firefox to play music backgrounds on pages in browsers it works in IE and other browsers but not firefox, what HTML or Jave script do I need too use to make them work?

I'm having a problem with firefox playing background music on some sites, it works with IE and other browsers but not with fire fox, what html or java script do I need to add to the pages so that they play the music?
I develop my pages in Front Page and I know that the music only works in IE, so if someone can tell me how to correct this problem as it is important as I use fire fox as my main browser.
I thank you in advance

If a website uses BGSOUND then it will only work in IE.
BGSOUND is not compatible with other browsers like Firefox.
* http://kb.mozillazine.org/Background_music_does_not_play

I want to play candy crush on Facebook and it says i need latest version of adobe flash player, i downloaded it and it still doesn't work. i uninstalled and re installed and still not working. what is wrong? what do i need to do,

i want to play candy crush on Facebook and it says i need latest version of adobe flash player, i downloaded it and it still doesn't work. i uninstalled and re installed and still not working. what is wrong? what do i need to do,

Translation from CS5 to Cloud doesn't work correct, navi and linked images are broken.

Translation from CS5 to Cloud doesn't work correct, <navi> and linked images are broken.
The data of CS5 was created at another PC. I installed Cloud version into two different PC. One has had the site data since dreamweaver CS5 and it works correct in Cloud version. Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.

Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.
This implies your site is not properly defined in DW. Go to Site > Manage Sites.
Or simply go to your other installation of DW and export the site definition file from Manage Sites.
Save it to a flash stick or other removable drive. Then import the STE file into your 2nd installation of DW.
Nancy O.

Zoom in-out and rotation in trackpad doesn't work in iPhoto and Aperture. Any solution?

Zoom in-out and rotation in trackpad doesn't work in iPhoto and Aperture. Any solution?

Sound like a trackpad problem and not an iPhoto one. Have you asked in the forum dedicated to the Mac model you're using or is this an add on trackpad?
OT

Command z doesn´t work on pages and other issues

Similar Messages

Maybe you are looking for