Comment augmenter le volume de la sonnerie de FaceTime?

Comment augmenter le volume de la sonnerie de FaceTime sur le IPad?

Je passer pour venir dire que j'ai réussi à contourner le problème.
Je ne sais toujours pas d'ou cela peut venir mais en passant mes vidéos par un logiciel de montage vidéo labview les accepte. A mon avis la compression des  vidéos devait être trop élevée, pour une heure la vidéo ne pesait que 40Mo, une fois modifier et réencoder elle fait 200Mo et est accepté par Labview.
Je vais quand même répondre aux question, DirectX 9.0c, Labview 8.6, NI-IMAQ 4.1
Je perd pas mal de temps en devant repasser les vidéos par le logiciel de montage vidéo mais c'est un moindre mal.

Similar Messages

  • Comment augmenter le temps de lecture vidéo?

    Bonjour,
    Je suis actuellement en train de faire un VI qui traite une vidéo. J'utilise donc les VI associé au AVI.
    Mon problème se pose lorsque j'utilise des vidéos très longues (au delà de 10min) la boucle qui traite chaque image se bloque car directx atteint le temps limite de lecture d'un fichier AVI. Une partie du message d'erreur concerne la fermeture de l'avi hors je ne le ferme qu'une fois avoir parcouru toutes les images de la vidéo à l'aide d'une boucle FOR. Le VI n'atteint donc meme pas le VI de fermeture, cela bloque avant.
    Il m'est demandé d'augmenter le temps d'attente comment puis je faire ceci?
    Pièces jointes :
    probleme fermeture directx.JPG ‏27 KB

    Je passer pour venir dire que j'ai réussi à contourner le problème.
    Je ne sais toujours pas d'ou cela peut venir mais en passant mes vidéos par un logiciel de montage vidéo labview les accepte. A mon avis la compression des  vidéos devait être trop élevée, pour une heure la vidéo ne pesait que 40Mo, une fois modifier et réencoder elle fait 200Mo et est accepté par Labview.
    Je vais quand même répondre aux question, DirectX 9.0c, Labview 8.6, NI-IMAQ 4.1
    Je perd pas mal de temps en devant repasser les vidéos par le logiciel de montage vidéo mais c'est un moindre mal.

  • Le bouton pour augmenter le volume ne marche pas

    Bonjour, il y a deux jours j'ai essaye de monter le volume pour ecoute de la music mais ca ne marchait pas. Alors j'ai eteint mon ipod mais ca ne fonctionnais pas.
    Si vous savez comment regler ce probleme s.v.p aide moi
    Hi,there are two days ago I try to up the volume for lisen music but it didn't work. So I turning down my Ipod but it wasn't fonctionning
    If you know how fix this problem please help me.

    Contact your carrier. Maybe they have an exchange program.
    If your iPhone is not working and under warranty, APple will replace it with the same model. If it is damaged, you can probalbly get an out of warranty replacement by paying a fee, but it will be the same model.

  • Comment augmenter la tailles des informations et commandes dans photoshop c5

    au cours d'une mise à jour la taille des informations et le visuel de photoshop  est devenu difficile à lire pour moi quel est la procédure pour augmenter la taille de lecture des commandes

    Hello,
    Je ne suis pas sur que la méthode de la DLL soit une bonne idée. Je ne vois pas en quoi cela aidera au partage de données entre deux applications (c'est très compliqué). Pour lire/écrire un fichier binaire, il faut savoir exactement comment sont agencés les types de données en mémoire, comme mentionné. Et notamment pour les tableaux, les en-têtes sont nécessaires (sinon on ne sait pas où s'arrête le tableau!). Il suffit de connaitre la taille de l'en-tête à la relecture pour la traiter correctement.
    Pour les types de données à passer à des DLLs, quelques documents intéressants :
    - http://digital.ni.com/public.nsf/allkb/5FE3C48E8E1C3D018625722900681AF6?OpenDocument
    - http://digital.ni.com/public.nsf/allkb/9216E4328E6704C3862576330071CF8E?OpenDocument
    Note : si les données sont relues immédiatement sur l'autre application, passer par une liaison TCP serait peut-être plus simple et plus rapide...
    Cdt
    --Eric
    Eric M. - Application Engineering Specialist
    Certified LabVIEW Architect
    Certified LabWindows™/CVI Developer

  • Comment recuperer le volum ( Lettre) d'une clé USB pour creer un chemin relatif avec Labwindows cvi

    Bonjour,
    Apres multiple recherche sur internet, je n'ai rien trouvé pouvant être utilisé sur CVI.
    Voici mon probleme, j'essaie de recuperer le volum (lettre) d'une cle USB brancher sur un port de mon ordi ou bien de recuperer les différents volum branchés sur l'ordinateur.
    Le but est de voir creer un chemin relatif pour que la clé USB puisse être utilisé en lecture/ecriture sur différent PC.
    Chaque PC attribue une lettre particuliére à la clé ce qui empêche de voir pouvoir creer un chemin statique.
    Merci d'avance pour vos réponses.

    LeViins a écrit :
    Bonjour,
    bien de recuperer les différents volum branchés sur l'ordinateur.
    Bonjour, pour info sous LabVIEW, la fonction "list folder" ou lister le contenu du dossier, si le chemin de recherche est vide... il retourne les différents disques du PC
    Luc Desruelle | Voir mon profil | LabVIEW Code & blog
    Co-auteur livre LabVIEW : Programmation et applications
    CLA : Certified LabVIEW Architect / Certifié Architecte LabVIEW
    CLD : Certified LabVIEW Developer / Certifié Développeur LabVIEW

  • Le volume sur itune ne fonctionne pas. la fonction "mute" n'est pas activée. Comment remettre le volume fonctionnel ?

    Le volume sur itune ne fonctionne plus depuis 2 jours. La fonction "mute" n'est pas activé et le son partout ailleurs sur mon ordi fonctionne à merveille...?
    Avez-vous des solutions svp ??

    Bonjour, et bonne année, ah, oui, votre pilote de carte graphique date de 2008!
    J'ai fait une recherche sur "Driver Nvidia"
    Dans leur site, j'ai entré le type de carte, une 9XXXM pour portable, le systeme d'exploitation, et j'ai trouvé celui-ci: http://www.nvidia.fr/download/driverResults.aspx/70289/fr
    Maintenant, certains portables ont deux cartes, mais seule une est listée ici.
    En espérant que cela vous aide!

  • Old volume names still appears on client

    Dear reader,
    Hopefully a simple question. After changing the volume name on the server the old name still appears on the client using df. I am not sure it is a big problem but as I have also other problems, this one is may be easy to fix and potentially related.
    The old name was MiniMax HD and is changed to MiniMaxHD. ( I will never put spaces in a volume name again)
    See also attached result of df from the client. The volumes on the server ore correct.
    Thanks
    PS do not hesitate if you have other comments on this volume list as I also have other problems.
    Filesystem 512-blocks Used Available Capacity Mounted on
    /dev/disk0s2 116538416 96683640 19342776 84% /
    devfs 215 215 0 100% /dev
    map -hosts 0 0 0 100% /net
    map auto_home 0 0 0 100% /home
    map -fstab 0 0 0 100% /Network/Servers
    trigger 0 0 0 100% /Network/Servers/FamilieServer.bHome.LAN/Users
    trigger 0 0 0 100% /Network/Servers/FamilieServer.bHome.LAN/Users4
    trigger 0 0 0 100% /Network/Servers/FamilieServer.bHome.LAN/Users3
    trigger 0 0 0 100% /Network/Servers/FamilieServer.bHome.LAN/Users2
    trigger 0 0 0 100% /Network/Servers/FamilieServer.bHome.LAN/Users1
    trigger 0 0 0 100% /Network/Servers/FamilieServer.bHome.LAN/Volumes
    trigger 0 0 0 100% /Network/Servers/FamilieServer.bHome.LAN/Volumes/MiniMax HD
    trigger 0 0 0 100% /Network/Servers/FamilieServer.bHome.LAN/Volumes/MiniMaxHD
    trigger 0 0 0 100% /Network/Servers/FamilieServer.bHome.LAN/Volumes/MiniMaxHD/Users5
    trigger 0 0 0 100% /Network/Servers/FamilieServer.bHome.LAN/Volumes/MiniMaxHD/Gedeeld
    trigger 0 0 0 100% /Network/Servers/FamilieServer.bHome.LAN/Volumes/MiniMaxHD/Familie
    trigger 0 0 0 100% /Network/Servers/FamilieServer.bHome.LAN/Volumes/MiniMax HD/Users5
    trigger 0 0 0 100% /Network/Servers/FamilieServer.bHome.LAN/Volumes/MiniMax HD/Gedeeld
    trigger 0 0 0 100% /Network/Servers/FamilieServer.bHome.LAN/Volumes/MiniMax HD/Familie
    afp_0vJT9J4wOjrt0bq9vm1LVzpC-1.2d00001b 233769824 38169992 195599832 17% /Network/Servers/FamilieServer.bHome.LAN/Users1

    The problem still exists. It is even worse as the external disk gave up and I bought a different one with a different name.
    Where is this information generated or stored. Even in finder I get different paths if I go through Network or Volumes here it should be the same.
    Any hints??

  • Bonjour j ai un iphone 4s 32 giga je voudrais savoir comment fait on pour effacer une sonerie qui n'apparait pas dans itune ni dans les dossier d'itune

    bonjour j ai un iphone 4s 32 giga je voudrais savoir comment on fait pour effacer une sonnerie personaliser qui n'apparait pas dans itune ni dans les dossier d'itune mais qui es sur l'iphone ?merci de votre reponsse

    Translated:
    Hello,
    I have a table in InDesign CS3 which I would add a footnote on page, but I am not capable. The option does not appear in the Text menu. Is there another option that also manually insert the figure in exposing directly next to my text in the picture?
    Because if I do it manually, it will undo all my other chips that are automatic.
    Thank you!

  • Problème de sonnerie

    Pourquoi la sonnerie de mon iPhone ne fonctionne pas lorsque je reçoit un appel ou une alerte, pourtant tout les réglages sont fonctionnel et le bouton son/silence sur le côté du iPhone est réglé à son?

    Très bizarre comme déscription du problème. "Quasiment plus de sonnerie", l'iPhone sonne toujours ou pas ? Le volume de la sonnerie se règle.

  • Zen Creative 4GB Volume in my Car Questi

    When I plug my MP3 in the the Aux Outlet the volume on the car jumps from 8 to 49. This should be blasting me out of the car but it just normal volume. My car is a 2008 Prius if that makes any difference.
    When I unplug the MP3 player the volume goes back to around 8.
    Ed Rossier?

    Any device that has a cable which connects to the headphone jack of an ipod will work with a Creative mp3 player. The best method of connecting is with a cable to the aux in on the car stereo, although some people have commented that the volume in their car doesn't get loud enough that way(it depends on the car). Another way to connect is using a cassette adapter if your car has a tape player. If not, the third option is using an FM transmitter(they are illegal to use in some places such as the UK though).

  • Limited volume in ipod classic

    in all ipod classic model is modificated the level of volume ?  out of the eurpepan union=

    iPod models sold in Europe have a lower volume limit in place.
    http://www.ilounge.com/index.php/news/comments/eu-proposes-volume-limit-on-ipods -iphones/
    B-rock

  • ? about volume settings and decibels

    ive been importing some mp3's to iTunes and then converting them to AAC files. but once i convert them, i notice the AAC files are quite a bit quieter than the original mp3's. ive been using AAC encoder at 128kbps under the High Quality Settings.
    heres an example: i just converted a mp3 of 96kbps into an AAC using the high quality settings of 128kbps. now i have sound check on, and for the original mp3 file under Get Info it says Volume -5.8dB.
    The AAC says Volume -8.3dB. I listenend to both and heard that the AAC is QUITE a bit QUIETER than the mp3.
    if AAC is supposedly better then why is it quieter than the LOWER mp3 settings? Basically, the AAC file is quiter but bigger in size?
    Does anyone know why the conversion is liek this or what those Volume settings i mentioned about mean?

    I don't have any comment on the "volume" issue, but in general I advise against converting from one format to another unless absolutley necessary.
    Since the original file is MP3, it's alredy been compressed - meaning audio data has been discarded in the process of making the mp3 file. Converting to AAC means another run through a compressor, and therefore even more lost data. The file will not sound better than the original, it's technically impossible.

  • Why is my Iphone's facetime volume so quiet now?

    Hey!
    I have a North American (Canadian) iPhone 4 running IOS 4.3.2.  Prior to this I had never updated the OS from 4.1.1.  I have never jailbroken/unlocked my phone or attempted to hack it in anyway.  It has always been in a case and has never experienced any form of physical damage.
    Anyways, I am in Australia now, and beginning about a month ago, the volume on facetime calls just randomly dropped to the point where I can hardly hear anyone unless I use headphones, and even then I need to have the volume at maximum.  As soon as I begin a call, the volume on the phone completely drops.  The sound of the ringer is quiet, and the other person's voice is quiet.  However, anyone I call can hear me just fine. This problem began and has continued prior to and after updating the ios.
    I've tried using the volume buttons, adjusting the volume in settings, closing all other apps, resetting the iphone, backing up and restoring the iphone, and none of this has worked for me.  I don't have anything covering the speaker or microphone, and I'm not covering the speaker with my hand or fingers.  It doesn't seem to be a problem with the speaker, because I can play music from the ipod or games without the headphones and they play at normal volume.  It's just facetime that causes a huge volume drop.  And I've tried this with my entire family back in Canada, all of whom have their own iPhone 4's (there are 4 of them), and it's the same in all cases.  They can hear me totally fine, but I can hardly hear them.
    I've looked at these similar posts and it seems like nobody has really found a solution in those cases either:
    https://discussions.apple.com/message/12437608#12437608
    https://discussions.apple.com/message/13298016#13298016
    https://discussions.apple.com/message/12356594?messageID=12356594
    Is there anything else to try besides bringing it to the Apple store? I just don't get it.  It only started about a month ago, it was never a problem back home in Canada, and I haven't done anything to my phone that would bring this about.
    Any help would be greatly appreciated!
    In the event that it is a problem with my phone, does my warranty extend from Canada to Australia? I bought my phone on September 9th, 2010, so it's within the 1 year warranty period.
    Thanks for your help!

    If that was in any way unclear, it seems somewhat similar to this user's scenario:
    https://discussions.apple.com/message/13059186#13059186

  • Experience​s with Lenovo and my purchases of two laptops

    Experiences with Lenovo and my purchases of two laptops (one was exchanged) and issues following with defective parts:
    First.. Lenovo Return Policy:
    I had ordered an E420, and by  mistake in that I responded to an email advertisement while at work, and rushed through the online order (bad mistake).
    When I received the E420, I didn't like the LCD or keyboard at all... and was really disappointed. While researching other customer experiences, I assumed Lenovo basically had an "all sales final" policy for Canadian Customers.
    I called them the next business day after receiving the E420, and said I was disatisified with the it, and would like to exchange it for a T520. She said that is possible, but I'd have to order the T520 before I could get a return authorization (which was ok).
    I ordered the T520, and within a week (I had to call and bug them once), I received the return labels for the E420, and returned it that day. It took about 10 days, for the full E420 credit to show up on my credit card, and I was very happy to see they did not charge me restocking.
    Second, issues with the T520:
    Within hours of opening the T520, I noticed the upper cursor key was not working. Not very good for a brand new laptop... a bit disappointing.
    I called lenovo the next morning, and she apologized for the issue, and said she'd send me another keyboard asap... and the instructions. This was ok, since repairing PC's and laptops is a skill I have. The keyboard came the next day.... and I replaced it.. all good.
    Next issue:
    The bluetooth worked for about 3 days, and stopped working (which was a pain because I used a lenovo blue tooth mouse).  Bios shows it enabled, but does not show up anymore when I do a FN F5, or in device manager. Just to be sure it wasn't an issue with software, I used the recovery DVDs to reinstall the OS... still no bluetooth.
    Called Lenovo support, he had me pull battery, press the power button with no power sources connected (he said it drained any capacitors), reset bios to system defaults... reboot a few times... still no bluetooth.
    He suggested I re-seat the bluetooth daughter card. While I felt comfortable with this, I was surprised Lenovo Support would suggest this, because I am sure many or most customers would not have this expertise to open a laptop without doing some sort of damage. That being said, Lenovo does have a Hardware Maintenance Guide that explains step by step procedures for replacement of parts on the T520.
    I didn't do this while on the phone with him, but after going through the troubleshooting, he said a box would come to my door, and I'd have to ship my laptop away for a week or so to have it fixed.
    I expressed my unhappyness with this idea as UPS/Lenovo just delivered the Laptop to my door and a week had not even passed, and I have to do without it for a week or ???. 
    I said, this is why purchasing a laptop online can be a huge drawback... had I purchased from "Best Buy" I could go exchange it over the counter in a few hours.
    Anyways.. I asked if I could drop it off at an Authorized Lenovo Repair depot, and he said yes.. just bring the case number.
    I personally don't trust "Repair Depots" by default.  They scratch laptops, they leave screws out, they mark the plastic edges when separating the covers, bezels, etc because they use metal screwdrivers or are not careful when doing so.
    After I got off the phone, I was able to re-seat the bluetooth card... still not resolved. I think I will call Lenovo back and ask the part to be sent to me, and I'll replace it.
    Other comments:
    Sound - The volume level on the T520 isn't as loud as my HP nx9420... unfortunate.. but I can live with it.
    Performance: The Performance rating on my 5 year old HP nx9420 was 4.3, this new T520 was 4.6... not that much better and appears to be due to the video card rating.
    Lenovo Packaging:
    I was also very surprised that Lenovo ships the laptops by sending them in their own box, and not putting them in a large box with padding to protect them. That means that any rough handing by UPS, would be experienced by the laptop, which if you ever talk to people who work for UPS or other couriers admit that they work on volume/speed and not giving much priority to ensuring items are handled carefully.

    The Windows experience index is only a rough guide, not a benchmark. Many people have reported having minor things wrong with the machines as shipped. Perhaps, this is due to shipping damage.
    I find it interesting that you BT went out after a keyboard replacement. Mine did the same thing, and had to be replaced. 
    When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
    My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

  • What Song Info is Stored in the File?

    Can anyone tell me which pieces of information about a song are stored in the song's file (as opposed to being stored in some iTunes database file)? I know Title, Artist, Genre, and artwork are, and that rating and play count are not, but what about:
    - "Part of a Compilation" status
    - Beats Per Minute
    - Grouping
    - Lyrics
    - Start and end time (see the "options section")
    - Equalizer Presets
    I'm considering moving some of my iTuens music to an external drive, but apparently the only way to do this is to remove it from iTunes and then re-import it (see Mike G., "Moving Lossless files to an external drive" #4, 05:09pm Nov 6, 2005 CDT ), which will cause me to lose all song information that isn't stored in the song files themselves...
    Thanks!

    For M4A and MP3 files...
    These are in the iTunes Library only:
    -- Playlists
    -- Ratings
    -- Play Count
    -- Last Played
    -- Date Added
    -- Date Modified
    -- Equalizer
    -- Volume Adjustment
    These are stored in the music file itself:
    -- Artist
    -- Album
    -- Song Title
    -- Year
    -- Comments
    -- Genre
    -- Grouping
    -- Volume Adjustment (a special iTunes only tag in the file - non-standard)
    -- Composer
    -- Bit Rate (not a tag - inherent to the file itself)
    -- BPM
    -- Kind (not a tag - inherent to the file itself)
    -- Album Art (only stored in the file - not copied to the iTunes Library ITL or XML files)
    You can keep the Ratings, Play Count, Last Played attributes with Otto42’s SaveRatings tool:
    http://ottodestruct.com/iTunes/SaveRatings.zip
    See: Otto42, "An ever-ubituous import library question ???" #7, 02:17pm Sep 28, 2005 CDT for directions

Maybe you are looking for