Comment mettre en place mon système(table xy,LabVIEW 7.1,PCI-7344 et le TL78 )?

Je suis un nouvel utilisateur de le système Motion Control(table xy, TL78, PCI-7344, Windows2000 et LabVIEW 7.1 ).
Je voudrais contrôler les table xy(MC)à partir de Labview.
J'ai télécharger Motion Assistant et des programmes de test et de contrôle.
Lorsque j'essai "program demo".
Modal Error indique une erreur 70137
si je lance "Test single axis" alors il m'indique l'erreur 70129 pourtant
ma configuration de l'axe est "enable".
Je n'arrive pas à paramètrer le système, malgré mes recherches sur le site de NI.
Je ne comprends pas comment exporter les signaux sous Labview.
je suis perdu!!!
Que dois-je faire??

Bonjour Neo,
Pour bien comprendre comment configurer votre système, ci-dessous le "User Manual" de la carte PCI-7344 :
http://digital.ni.com/manuals.nsf/websearch/B9EBDE089990585986256A29005C5228?opendocument
Les erreurs que vous avez reçues sont typiquement des erreurs de configuration. Pour les corriger :
http://digital.ni.com/public.nsf/websearch/80E248BAE0267A4286256A0F00039331?OpenDocument
Pour votre programme de contrôle de table xy, veuillez bien lire les documents ci-dessous :
http://zone.ni.com/devzone/conceptd.nsf/webmain/45BBF7386CF123BC862567F200671EC5?opendocument
http://forums.ni.com/ni/board/message?board.id=240&message.id=1332&requireLogin=False
Je reste à votre disposition.
Cordialement,
Sanaa T
National Instruments France
Sanaa T.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> http://www.nidays.fr/images/081110_ban_nidays09_468X60.gif

Similar Messages

Position Control of compumotor linear servo table and GV-U6E with PCI-7344

I'm referring PCI-7344 (not 7334).
I have the GV-U6E which is a drive only and does not possess control functionality. the drive only version does not store or use programs. So, serial commands can not be sent through COM port by LabVIEW even though A few basic commands can be emulated.
I am trying to do position control as I mentioned. For example, the motor should move A point to B point exactly with a certain speed. The points must be aboulte position.
I would like you to see the reference comment that I have been contacting with in your website forum.
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000DD490000&USEARCHCONTEXT_CATEGORY_0=_14_&USEARCHCONTEXT_CATEGORY_S=0&UCATEGORY_0=_14_&UCATEGORY_S=0
Regard,
Jin Ho Lee
----- Original Message -----
From:
To:
Sent: Thursday, September 26, 2002 5:00 PM
Subject: Re: (Reference#1549-QYW196) "Position Control of linear servo table and GV-U6E with PCI-7344
>
> Note: Your reference number is included in the Subject field of this
> message. It is very important that you do not remove or modify this
> reference number, or your message may be returned to you.
>
>
> JinHo. Compumotor is a very popular brand, and I know of several customers
> who integrate our 7334 with Computmotor drives. However, when you say that
> the MAX configuration doesn't fit in the compumotor drive settings, are you
> referring to the specs from the 7344? It looks like the 7344 and the
> Compumotor will work well together through a UMI break out box. If you're
> referring to specific commands that the Compumotor receives, I'd have to
> know more about the protocol. If the Compumotor needs serial commands,
> then you can send them through the computer's COM port from LabVIEW.
> Please let me know exactly what kind of configurations you're trying to
> set. The 7344 can be completely configured in MAX and LabVIEW.
>
>
> Best Regards
>
> Kyle Voosen
> Applications Engineer
> National Instruments
> http://www.ni.com/support
>
> ------------------------------------------------------------------------------
>
> Problem Description :
> "Position Control of compumotor 406LXR linear servo table and GV-U6E(motor
> drive) with PCI-7344"
>
> "Since I had the answers referring:
> http://exchange.ni.com/servlet/ ProcessRequest?RHIVEID=101&RPAGEID=135&
> HOID=506500000008000000DD490000& USEARCHCONTEXT_CATEGORY_0=_14_&
> USEARCHCONTEXT_CATEGORY_S=0& UCATEGORY_0=_14_&UCATEGORY_S=0
>
> Wiring step was done well. However, I still have a problem that MAX
> configuration doesn't fit in compumotor drive settings. Therefore, the
> setup is shown below, and I want to know how I can set up PCI-7344
> configuration in MAX or LabVIEW VI.
>
>
> -----------------------------------------------------
>
> Uploaded from device address 0
>
> Gemini GV Servo Drive Setup
>
>
>
> Motor Setup
> DMTR 1703
> Motor ID (406-x-LXR-M-x-D13-x-x-x-x-E5-x-x-x)
> DMTIC 2.48
> Continuous Current (Amps-RMS)
> DMTICD 0.00
> Continuous Current Derating (% derating at rated speed)
> DMTKE 17.6
> Motor Ke (Volts (0-to-peak)/krpm)
> DMTRES 10.10
> Motor Winding Resistance (Ohm)
> DMTJ 119.300
> Motor Rotor Inertia (kg*m*m*10e-6)
> DPOLE 1
> Number of Motor Pole Pairs
> DMTW 40.5
> Motor Rated Speed (rev/sec)
> DMTIP 7.40
> Peak Current (Amps-RMS)
> DMTLMN 3.4
> Minimum Motor Inductance (mH)
> DMTLMX 3.4
> Maximum Motor Inductance (mH)
> DMTD 0.000000
> Motor Damping (Nm/rad/sec)
> DMTRWC 0.23
> Motor Thermal Resistance (degrees Celsius/Watt)
> DMTTCM 20.0
> Motor Thermal Time Constant (minutes)
> DMTTCW 0.33
> Motor Winding Time Constant (minutes)
> DMTAMB 40.00
> Motor Ambient Temperature (degrees Celsius)
> DMTMAX 90.00
> Maximum Motor Winding Temperature (degrees Celsius)
> DHALL 1
> Disable Hall Sensor Checking
> DMTLQS 0
> Set Q Axis Inductance Saturation
> DMTLDS 0
> Set D Axis Inductance Saturation
> DTHERM 0
> Disable motor thermal switch input
>
>
>
> Drive Setup
> DMODE 2
> Drive Control Mode
> DRES 8400
> Drive Resolution (counts/rev)
> DPWM 16
> Drive PWM Frequency (kHz)
> SFB 1
> Encoder Feedback
> ERES 8400
> Encoder Resolution (counts/rev)
> ORES 8400
> Encoder Output Resolution (counts/rev)
> DMEPIT 42.00
> Electrical Pitch (mm)
> SHALL 0
> Invert Hall Sensors
> DMTLIM 1.5
> Torque Limit (Nm)
> DMTSCL 1.5
> Torque Scaling (Nm)
> DMVLIM 119.000000
> Velocity Limit (rev/sec)
> DMVSCL 119.000000
> Velocity Scaling (rev/sec)
>
>
>
> Load Setup
> LJRAT 0.0
> Load-to-Rotor Inertia Ratio
> LDAMP 0.0000
> Load Damping (Nm/rad/sec)
>
>
>
> Fault Setup
> FLTSTP 1
> Fault on Startup Indexer Pulses Enable
> FLTDSB 1
> Fault on Drive Disable Enable
> SMPER 8400
> Maximum Allowable Position Error (counts)
> SMVER 0.000000
> Maximum Allowable Velocity Error (rev/sec)
> DIFOLD 0
> Current Foldback Enable
>
>
>
> Digital Input Setup
> INLVL 11000000
> Input Active Level
> INDEB 50
> Input Debounce Time (milliseconds)
> INUFD 0
> Input User Fault Delay Time (milliseconds)
> LH 0
> Hardware EOT Limits Enable
>
>
>
> Digital Output Setup
> OUTBD 0
> Output Brake Delay Time (milliseconds)
> OUTLVL 0100000
> Output Active Level
>
>
>
> Analog Monitor Setup
> DMONAV 0
> Analog Monitor A Variable
> DMONAS 100
> Analog Monitor A Scaling (% of full scale output)
> DMONBV 0
> Analog Monitor B Variable
> DMONBS 100
> Analog Monitor B Scaling (% of full scale ouput)
>
>
>
> Servo Tuning
> DIBW 1500
> Current Loop Bandwidth (Hz)
> DVBW 100
> Velocity Loop Bandwidth (Hz)
> DPBW 40.00
> Position Loop Bandwidth (Hz)
> SGPSIG 1.000
> Velocity/Position Bandwidth Ratio
> SGIRAT 1.000
> Current Damping Ratio
> SGVRAT 1.000
> Velocity Damping Ratio
> SGPRAT 1.000
> Position Damping Ratio
> DNOTAF 0
> Notch Filter A Frequency (Hz)
> DNOTAQ 1.0
> Notch Filter A Quality Factor
> DNOTAD 0.0000
> Notch Filter A Depth
> DNOTBF 0
> Notch Filter B Frequency (Hz)
> DNOTBQ 1.0
> Notch Filter B Quality Factor
> DNOTBD 0.0000
> Notch Filter B Depth
> DNOTLG 0
> Notch Lag Filter Break Frequency (Hz)
> DNOTLD 0
> Notch Lead Filter Break Frequency (Hz)
> SGINTE 1
> Integrator Option
> SGVF 0
> Velocity Feedforward Gain (%)
> SGAF 0
> Acceleration Feedforward Gain (%)
> -----------------------------------------------------
>
>
> Regards,
> JinHo"
> NI Software :
> LabVIEW version 6.0
> NI Hardware :
> Motion Control device PCI-7344
> Driver Version :
> no
> OS :
> Windows 2000
> CPU :
> Pentium
> RAM :
> 128
> Vendor :
> DELL
> Customer Information :
> Jin Ho Lee
> North Carolina State Univ.
> US
> [email protected]
> Ph: (
> 919
> )
> 512-9929
>
>

Yes, we used an NI PXI-7344 motion control card with an NI UMI-7764 box connected to a Gemini GV-U12E servo drive. (which is a drive only.)
We did positional control in absolute position mode.
I can send you an AutoCAD schematic detailing how to connect the UMI-7764 to the Gemini GV servo drive.
In regard to the Rs232 interface to the GV servo drive,
the GV drive only model is "configurable" not "programmable". You can create unique GV configuration files with Compumotor's Motion planner then download the configuration via Rs232 using LabVIEW as desired. Or, using LabVIEW via Rs232 you can change individual GV drive parameters on demand,
or use the GV's two analog outputs back to LabVIEW's analog inputs to measure commanded motor current or torque, etc.etc.etc

Comment mettre undvd sur mon Ipod

Bonjour,
Quelqu'un serait il me dire comment transformer le format d'un dvd sur un ipod 80 Gb.
Merci par avance

Cminne,
Qqn vien de repondre a la même question en anglais. Cliquez ici.
J'espere que ça vous aide.
Ed
Windows XP

Comment mettre Airplay sur un iPad 2 ?

Bonjour j'ai un iPad 2 mais je n'ai pas dessus Airplay mais pourtant j'ai vu que certains iPad 2 avaient Airplay. Alors comment mettre Airplay sur mon iPad 2 ?
Merci d'avance.

Bonjour dhelene,
C'est ne pas possible d'installer iWork de CD.
The CD version is for Mac OS X and will not work with iOS on the iPad Mini. You must purchase each part you want from the App Store for the iPad.
Ralph

Comment mettre la mise a jour ipod avec nouveau ordinateur, comment mettre la mise a jour ipod avec nouveau ordinateur

comment mettre la mise a jour avec un nouvelle ordinateur sur mon ipod

Bonjour et merci de votre réponse,
Pour ce qui est du controle de mon chassis, je ne souhaite pas faire appel au websever... j'aimerais que l'affichage de l'IHM sur la tablette soit "propre", je veux dire par la, que je voudrais que l'utilisateur ai l'impression d'utiliser une application standard comme on peut le voir de nos jour sur nos tablette et non pas afficher mon interface dans un navigateur web... c'est juste par soucis esthétique mais j'y tiens beaucoup :-)
Je n'avais pas pensé au variable partagé sur le réseau car je n'en ai jamais utilisé, je pensais qu'il était possible de mettre à jour des commandes a l'aide de Viserver meme si ces variable sont situé dans une boucle while... Cela me semble bisard que ce ne soit pas possible car il me semble que l'on peut controler un exécutable créer à partir de VI labview.

Comment mettre des films dans l'ipad

Bonjour j'aimerai savoir comment mettre dans mon ipad des films au format avi pour pouvoir les regarderr sur l'ipad svp ?

iPhone and iPad's acceptable movie formats are MOV, M4V and MP4. You will have to find a third party Video converter to convert the format from AVI to MP4 or M4V.
A good and free one is called Any Video Converter, you can download from CNET's Download.com from this link:
http://download.cnet.com/Any-Video-Converter/3000-2194_4-10661456.html?tag=mncol ;7

Comment faire pour activé mon ipod touch

comment faire pour activé mon ipod touch

Google translate:
How to déblolquer ipod touch has never been synchronized on Itunes and it is locked by a password. thank you
Place the iPod in Recovery Mode and restore via iTunes. The iPod will be erased
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Backing up, updating, and restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the iPod backup that iTunes makes.
You can redownload iTuns purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Comment mettre à jour la fréquence de la sortie compteur

Comment mettre à jour la fréquence de la sortie compteur d'une carte 6723 sans arreter la tâche ?
Merci

Bonjour Lunik
Effectivement Olivier a raison.
Veillez cependant à bien placer le noeud de propriété après que la tâche daqmx ait exécuté au moins un cycle pour ne pas générer d'erreur. (cf photo). Dans le diagramme d'exemple que je vous fourni cela se fait en plaçant le noeud de propriété après le VI "Wait until task done".
Romain D
Romain DUVAL || Application Engineer Specialist ||Certified LabVIEW Architect (CLA) || Certified TestStand Architect (CTA)
National Instruments France

Hier j'ai acheté et téléchargé Photoshop Elements 13 or je viens de voir que mon système étant sous windows Vista je ne povais pas utiliser cette version, puis je tlécharger la version 12 et l'installer avec le numéro de série que j'ai eu pour la version

Hier j'ai téléchargé la version 13 de Adobe Elements alors que mon système tourne sous Vista. Est ce que je peux télécharger la version 12 ou 11 qui est compatible et utiliser le même numéro de série ?
Merci d'avance

Bonjour, Adrien.
Dans ce cas, j'essayerais d'abord de mettle à jour les pilotes de la carte graphique, sur le site d'AMD.
Ensuite, essayer de mettre à jour le programme creative cloud, pour qu'il détecte correctement les mises à jour de Photoshop.

Comment mettre une chanson en sonnerie pour les appels entrants???

bonjour, je voudrais savoir comment mettre une chanson en sonnerie sur mon iphone 3, je sais qu'il faut que la chanson fasse entre 30 et 40 secondes...mais comment faire???

Right mouse click the song in music library you want to create ringtone and choose “Get Info”
Choose “Option” Tab, Check “Start Time” & Stop Time” of the track you want to make into ringtone and put in your start time and end time (Max 40 secs duration), then click OK
Right mouse click the song again and choose “Create AAC Version”
You will see a copy of song with same name appeared but with 40sec duration only. Now drag the song onto your desktop and you will see the name is now xxxxxx.m4a.
Change the file extension m4a into m4r from the desktop
Delete the 40sec m4a file from the music library (You must do this step or Itune will not accept your new m4r file).
*Important - Now uncheck the start & stop time of the original song so that you can play back full length.
Now, drag the m4r file from desktop to Library
Click onto the Tones under Library, and you find you ringone file.
Note: Just in case you cannot "Create AAC version" from Step 3, go to top menu, click "Edit", "Preference". Under "general" Tab, click "Import Settings", make sure under Import Using that "AAC Encoder" is selected.

The place holders in my Table of Contents will not accept a photo. I have several chapters with photos in the Table of Contents placeholders, but several at the beginning that will not let me put the photos in. Can anyone help me with this?

The Place Holders in my Table of Contents will not accept a photo for the first few chapters. I have rebooted the computer and that didn't work. Can anyone help? I have worked so hard on getting everything done for this book and this is the last thing to do and I need help with it.

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

How can i put de number 2 over km 2? Comment mettre le 2 surélevé pour km carré?

How can i put de number 2 over km 2? Comment mettre le 2 surélevé pour km carré?

Hi Bellu77,
Using the Character Viewer you can add a ² to make km² in Mountain Lion:
OS X Mountain Lion: Enter special characters and symbols
http://support.apple.com/kb/PH10758
By default, the Digits list is not listed in Character Viewer, but that article includes instructions on showing other lists including Digits:
Customize the Character Viewer
If you don’t see the character or symbol that you want to use, try customizing the Character Viewer.
Choose Customize List from the Action pop-up menu (looks like a gear) in the top-left corner of the Character Viewer.
Select the categories that you want to appear in the Character Viewer, and then click Done.
Cheers!
- Ari

Comment mettre une video sur ipod

comment mettre une video du imac au ipod?

Bonjour,
Quelle version de LabVIEW tu utilises ?
SI tu as une version récente, et que tu as la palette Silver (ou argent en français), tu peux partir d'un de ces boutons qui possèdent une image dessus. Tu suis la procédure proposée par Kaleck0 mais au lieu de remplacer le bouton en lui-même, tu le fait sur l'image utilisée dans le bouton silver.
Tu devrais obtenir le résultat souhaité, c'est à dire une image qui est comprise dans le bouton mais qui n'est pas le bouton.
Par contre, je ne crois pas qu'on puisse avoir une image différente en fonction de l'état du bouton.
.mesLeft{float:left} .mesInfo{border-left:solid 1px #989898;font-size:x-small;color:#989898} .mesLogo{float:right;opacity:0.18} .mesLogo:hover{opacity:0.9}
Maxime R.
  CLD - Certified LabVIEW Developer / Développeur LabVIEW Certifié
  CLAD - Certified LabVIEW Associate Developer

Comment mettre des films ou des series sur itunes sans les acheter ?

comment mettre des films ou des series sur itunes sans les acheter ?

iPhone and iPad's acceptable movie formats are MOV, M4V and MP4. You will have to find a third party Video converter to convert the format from AVI to MP4 or M4V.
A good and free one is called Any Video Converter, you can download from CNET's Download.com from this link:
http://download.cnet.com/Any-Video-Converter/3000-2194_4-10661456.html?tag=mncol ;7

Comment installer photoshop de mon ordi de bureau à mon ordi portable? merci

j'ai un imac avec dessus photoshop et elements 12 et comment les installer sur mon ordi portable?
merci

Lantara30 wrote:
I downloaded the application documents2 SavySoda on my iPhone. How to transfer documents from my computer to my smartphone (both devices are connected and open iTunes).
Thank you. (Google Translate)
iTunes 10 for Windows: Transfer files between your computer and mobile apps
Hope this helps.

Comment mettre en place mon système(table xy,LabVIEW 7.1,PCI-7344 et le TL78 )?

Similar Messages

Maybe you are looking for