Comment on survey

Comment on survey:
Hi to the members of the forum.
I need to give a report to our CPA who is in charge of SOX subject.
The report has to show all the comments which were written in all the Subprocess and control assessments.
Is there other table beside GRPCQANSWER?
I donu2019t know in which table I can find the comments of the assessment itself- not for the lines in the survey but for the all of it and as well the process owner review comments.
Regards and best week,
Alik Keren

See, this is the problem with Apple. They can keep charging stocking fees, because no one knows what the Specs are of the machines, and they can keep saying it's within specs and charge the stocking fee.
Luckily, I never had to pay a restocking fee, and glad you got a refund, but to me, this looks like one big scam. They can keep reselling these machines, make there stocking fees, and still sell the old machines and make a nice healthy profit.

Similar Messages

Could this be the killer photography app for iPad (and Apple TV, etc)?

The iPad and Apple TV could become the next killer app for professional photographers - all Apple needs to do is copy the iPod programming into the Photo app as follows:
1. Enable rating photos being viewed (1=top, 5=bottom)
2. Enable viewing photos by rating (1s only, 1s and 2s, unrated, any combo)
3. Enable slideshow to randomly pick from photos by rating
4. Enable virtual albums just like the iPod playlist function, so photos could be organized into albums without being recopied.
5. Enable slideshow to use multiple folders, albums and playlists (new feature)
Then the wedding photographer could invite the client to see their virtual album, rate the pictures being viewed for selection in the wedding album.... you "get the picture?"
Come on Apple, this one's easy!

t4oyman wrote:
The iPad and Apple TV could become the next killer app for professional photographers - all Apple needs to do is copy the iPod programming into the Photo app as follows:
1. Enable rating photos being viewed (1=top, 5=bottom)
2. Enable viewing photos by rating (1s only, 1s and 2s, unrated, any combo)
3. Enable slideshow to randomly pick from photos by rating
4. Enable virtual albums just like the iPod playlist function, so photos could be organized into albums without being recopied.
5. Enable slideshow to use multiple folders, albums and playlists (new feature)
Then the wedding photographer could invite the client to see their virtual album, rate the pictures being viewed for selection in the wedding album.... you "get the picture?"
Come on Apple, this one's easy!
...but it doesn't post the suggestion for others to comment, which is what I was seeking here....
You didn't ask for comments in your original post. The tone of your post implied that you wanted to let Apple know your feeling, not a request for comment or survey, etc.

Networking via Oracle Mix

I just discovered Oracle Mix! It is really cool, because it lets you create or join groups, connect with other peers, invite other members, discuss topics, share your ideas, add your comments, run surveys...it even lets you chat with existing members!
So I just created a new Mix group for us, called QA / Testing Technology Center, and you can find it here https://mix.oracle.com/groups/12932
I hope to see you there, and of course....let me know if you think that we should change the name for our Mix group.

This might help if you're an XP user.
Use your BT Home Hub - Use it as a print server - Windows XP guide
Sunday 03 December 2006
Have you ever wondered what that USB port on your BT Home Hub was for? Well it turns out that you can use it to connect a printer to and therefore turning you BT Home Hub into a print server.
For some reason BT don't seem to share this information easily, I don't know why though as personally I think it's another selling point for them. The only reason I can think of is that they don't want to support it.
To set this up, follow the below (Windows Vista users, click here):
1) Connect your printer to the USB port on the BT Home Hub
2) Start the Add New Printer Wizard
3) Select to Add a local printer and make sure that the automatically detect option is unticked
4) Click Next
5) Select create a new port and select Standard TCP/IP port from the list
6) Click Next
7) Click Next
8) Enter 192.168.1.253 in the printer name field and the port name will automatically be completed
9) Click Next
10) Select Custom and click the settings button
11) Select LPR
12) Select LPR Byte Counting Enabled
13) Enter the Queue Name as LPT1
14) Click OK
15) Click Next
16) Click Finish
17) Either select your printer from the list or insert the printer driver CD and click have disk
18) Click Next
19) Enter your printer name and select if you want it to be your default printer
20) Click Next
21) Select if you want to share your printer
22) Click Next
23) Print a Test Page
24) Click Next
That's it, you should now be able to print to a USB printer connected to your BT Home Hub.

When I'm in Yahoo news comments, WaterFox keeps interrupting me with a survey about FireFox. Then I can't get back to where I was. Help?

Actually, I'm using WaterFox 28.0, but that wasn't an option.
I try to access my comments to Yahoo news stories. I may be in the middle of posting a comment, or just running through them to see how people have responded. WaterFox suddenly interrupts me with a survey about FireFox. It interrupts what I'm doing, and afterward the only way back to the place where I was is to start at the top of the comments again and search for it. If I was posting, either my post is lost entirely, or it posted in incomplete form.
I've tried answering the survey in the hopes that it will go away, but it keeps showing up. It's exceedingly annoying, and, much as I love WaterFox I'm considering going with Chrome or Torch instead.
I have WaterFox set to block pop-ups, but apparently WaterFox doesn't think that applies to itself.
Does ANYONE know how to make this go away?
MargretMinette

You have a bad extension loaded into Firefox.
*MediaPlayerplus
Remove this by going to [[Image:new fx menu]] > Add-ons > Extensions
Uninstall anything you don't recognize from your control panel. (Start > Control Panel > Uninstall a Program
You will also want to run ADW Cleaner to remove any remnants of the extension
*http://www.bleepingcomputer.com/download/adwcleaner/

Surveys without comments

Is there any way to disable the users' ability to post comments on a Survey? For example, we would only want to let the users vote, but not comment.
The User guide doesn't appear to say so. I did a fresh survey, and the option did not appear.
Thank you.

clinderman,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Add comments box in a survey

hi,
i am currently looking into a survey list and i have created a survey. But the issue is that, I want to add a comments box at the end of the survey.
ie, when user completes the survey, he should enter comments about the same. i searched in net, came to know that its not possible in SP out of the box. So, is there any way i can achieve this, with a small customization.
thnx

http://stackoverflow.com/questions/2341390/sharepoint-survey-can-i-add-a-comment-box-to-a-rating-likert-question
There is no starightforward way for doing this. But here is a work around which I used.
1.Add a Question, with Text box, below the question under which you need this comment box.
2.Edit the Newform.aspx page and insert a content editor webpart in the below of existing survey webpart
3.Copy and paste the below code in the content editor webpart
<script>
var tables
tables = (document.getElementById('ctl00_m_g_c7647c31_a9f9_4f27_aa53_e0728c485b2c_ctl00_ctl01_ctl00_ctl00_ctl00_ctl04_ctl00_ctl00_TextField').offsetParent).offsetParent;
var i
var str
for(i=0;i<tables.rows.length;i++)
str = tables.rows[i].cells[0].innerHTML;
str = str.substring(0,7)
//alert(str);
if(str == 'Comment')
tables.rows[i].cells[0].innerHTML = '<table width=400px border=0><tr><td><font color=blue size=3></font></td></tr></table>';
</script>
In the above code ctl00_m_g_c7647c31_a9f9_4f27_aa53_e0728c485b2c_ctl00_ctl01_ctl00_ctl00_ctl00_ctl04_ctl00_ctl00_TextField is the ID of the Comment textbox control (You can get it by viewing source)
We get the container of this control (table) and then hide the question. Hope this helps. Let me know if you need more help.
Or
http://social.technet.microsoft.com/Forums/en-US/3decfbc5-f921-42b2-857b-4dbc6ed93c31/how-can-i-have-no-answer-questionsfree-text-using-sharepoint-2010-survey?forum=sharepointgeneralprevious
The survey page is the NewForm page of the Survey. You can open SharePoint Designer, select the survey list, click NewForm.aspx in the Right and insert a TextBox. Then you can see the standalone free textbox when you respond to this survey. However, the
value you entered into texbox cannot be saved into the survey.
As a workaround, you can add a question and set the type of answer to Single line of text. You can enter the value whatever you want as the question.
http://highbrowse.wordpress.com/2011/12/13/taking-the-sharepoint-survey-list-a-step-further/
http://iedaddy.com/2012/05/sharepoint-2010-change-survey-option-specify-your-own-value-to-other/
If this helped you resolve your issue, please mark it Answered

2009 Survey is open - and a good place to offer comments and suggestions

Hi all:
The 2009 survey is a good place to make your voices heard about SDN, BPX, BusinessObjects communities. It'll take a few minutes and earns you a few points, plus someone will win a free ticket to TechEd '09. Go here please: http://sdnweb.sdn.sap.com/cnsurveys/SDNSurvey2009.htm

You may try iFixit.com and see if they have a battery for your model MBP.
Ciao.

Site Survey Theory .... All Comments, Thoughts, and Theories are welcome

Hello All,
I am seeking opinions about a survey methodology that was told to me today. I have my own thoughts about it but I just want to make sure I'm not off base so any help is greatly appreciated. The requirements for the wireless network are as follows:
- Data and Voice
- Clients will utilize all bands but newer devices will be pushed to 5GHz
- Clients are laptops and iPads right now but the future goal is to implement BYOD
So, here is the methodology that was told to me ... "We survey only in the 5GHz spectrum because if you have coverage in that spectrum (5GHz) the coverage in the 2.4GHz will be the fine or even better than that. Therefore, we feel comfortable not capturing the data in the 2.4GHz spectrum."
Thoughts about the above statement are welcome!!!
Thanks,
Malwan

The essential question for a high-density design is how many channels for each band will be needed to match the client base? This can be a tricky question since even dual band capable clients do not always select the faster 5 GHz band. Since bandwidth in 2.4 GHz is going to be limited, 5 GHz must be relied on to reach the goal.
Dual band adapters have been shipping with most laptops for some time. This does not mean that every laptop is a dual band client, but many are. Simply having a dual band client does not guarantee that it will choose 5 GHz over 2.4 GHz. The Microsoft Windows operating system defaults to a Wi-Fi channel search that starts with the 5 GHz channel 36 and continues searching through all of the 5 GHz channels that the client is capable of. If no 5 GHz AP is found then it will continue the search in 2.4 GHz starting at channel 1. Unless the Windows default is changed or the user has chosen a third party Wi-Fi utility to set spectrum preference to 2.4 GHz, the client radio will first try to associate to a 5 GHz AP. Apple Computer's latest release for Atheros and Broadcom chipsets also searches 5 GHz first.
The Cisco BandSelect feature enables the infrastructure to optimize these types of client connection choices. Where possible, it helps make sure that devices are attaching to the 5 GHz spectrum channels where interference sources tend to be significantly lighter. A much greater channel selection leads to the alleviation of bandwidth challenges.
Tablet computers and smartphones have begun entering the market at a staggering rate. The vast majority of smartphones shipping today operate in 2.4 GHz only. While many of them are 802.11n clients, of these most have implemented a single input single output (SISO) rather than Multiple Input, Multiple Output (MIMO). A SISO device is only capable of supporting MCS7 data rates, or 54 Mbps.

How do I add a survey to my website?

Hello everyone,
I want to build my own website using IWeb. I want use this website to collect data for my honours thesis. What I would like to do is add a survey to my website. I would like visitors to be able to answer a number of questions and I would like these answers to be send to me. Therefore, I need to add some sort of "form" to my website. Does anyone whether this is possible in IWeb? Or whether I can download anything to add it to my website? Or maybe add a link to it, directing to another website?
Thanks you all very much in advance!
Gabrielle

Copy/Paste this into an html snippet
<FORM ACTION="mailto:[email protected]?subject=Email Subject you see when someone fills out your form " ENCTYPE="text/plain">
<B>Radio Button Questions</B>
<BR>
<INPUT TYPE="radio" NAME=Category is VALUE="Answer 1 ">
Answer 1
<INPUT TYPE="radio" NAME=Category is VALUE="Answer 2 ">
Answer 2
<INPUT TYPE="radio" NAME=Category is VALUE="Answer 3 ">
Answer 3
<B>Basic one-Line submission Question</B>
<BR><INPUT Name="Question2" size="50">
<B>Large comment box area</B>
<BR><TEXTAREA NAME="comment" ROWS=5 COLS=50></TEXTAREA>
<INPUT TYPE=submit VALUE="Send Form ">
<INPUT TYPE=reset VALUE="Reset Form">
</FORM>
Google "form tags" to find more...

Generated XML doc file contains comments from MFC source code

Hello, in my project I use the option /doc to generate XML doc file from my source codes but unfortunately in the output XML file there are mixed also comments from original MFC source codes, see the part of generated xml file:
Is there a solution to ignore these MFC cpp files?
Many thanks
Regards
Petr Stejskal
<?xml version="1.0"?>
<style xmlns="http://www.w3.org/1999/xhtml">@namespace html url(http://www.w3.org/1999/xhtml); :root { font:small Verdana; font-weight: bold; padding: 2em; padding- } * { display: block; padding- } html|style { display: none; } html|span, html|a
{ display: inline; padding: 0; font-weight: normal; text-decoration: none; } html|span.block { display: block; } *[html|hidden], span.block[html|hidden] { display: none; } .expand { display: block; } .expand:before { content: '+'; color: red; } .collapse
{ display: block; } .collapse:before { content: '-'; color: red; } </style><doc><assembly><assembly>
"Console" </assembly></assembly><members><members><member name="T:_RS"><member
name="T:_RS">Reed-Solomon codec control block</member></member><member name="M:MMask_makeMask(System.Int32,System.Byte*,System.Int32,QRecLevel)"><member
name="M:MMask_makeMask(System.Int32,System.Byte*,System.Int32,QRecLevel)">Mode indicator. See Table 2 in Appendix 1 of JIS X0510:2004, pp.107.</member></member><member
name="M:CMFCControlRenderer.IsScaled"><member
name="M:CMFCControlRenderer.IsScaled"><summary><summary>Tells whether this control
renderer works with scaled (resized) images.</summary></summary><returns><returns>Returns TRUE if this control
renderer works with resized (scaled) images.</returns></returns></member></member><member name="M:CMFCControlRenderer.SmoothResize(System.Double)"><member
name="M:CMFCControlRenderer.SmoothResize(System.Double)"><summary><summary>
Smoothly resizes images.</summary></summary><param name="dblScale" /><param
name="dblScale"> Scale ratio.</param><returns><returns>
TRUE if resize succeeds; otherwise FALSE.</returns></returns></member></member><member name="M:CDrawingManager.CreateBitmap_32(HBITMAP__*,System.UInt32!System.Runtime.CompilerServices.IsLong)"><member
name="M:CDrawingManager.CreateBitmap_32(HBITMAP__*,System.UInt32!System.Runtime.CompilerServices.IsLong)"><summary><summary>
Creates a 32 bit bitmap from the specified bitmap.</summary></summary><returns><returns> A handle to created
bitmap, or NULL, if creation fails.</returns></returns><param name="bitmap" /><param
name="bitmap"> A handle to the original bitmap.</param><param name="clrTransparent"
/><param
name="clrTransparent"> An RGB value specifying transparent color of the original bitmap.</param></member></member><member
name="M:CDrawingManager.CreateBitmap_32(CSize!System.Runtime.CompilerServices.IsConst*!System.Runtime.CompilerServices.IsImplicitlyDereferenced,System.Void**)"><member
name="M:CDrawingManager.CreateBitmap_32(CSize!System.Runtime.CompilerServices.IsConst*!System.Runtime.CompilerServices.IsImplicitlyDereferenced,System.Void**)"><summary><summary>
Creates an empty 32 bit bitmap.</summary></summary><returns><returns> A handle to created bitmap, or NULL,
if creation fails.</returns></returns><param name="size" /><param
name="size">Specifies bitmap size.</param><param name="pBits" /><param
name="pBits">When the function returns contains a pointer to bitmap bits.</param></member></member><member
name="M:CDrawingManager.DrawRotated(CRect,CDC*!System.Runtime.CompilerServices.IsImplicitlyDereferenced,System.Int32)"><member
name="M:CDrawingManager.DrawRotated(CRect,CDC*!System.Runtime.CompilerServices.IsImplicitlyDereferenced,System.Int32)"><summary><summary>Rotates
a source DC content inside the given rectangle by +/- 90 degrees</summary></summary><param name="rectDest" /><param
name="rectDest">Destination rectangle</param><param name="dcSrc" /><param
name="dcSrc">The source device content.</param><param name="bClockWise"
/><param
name="bClockWise">TRUE - rotate +90 degrees, FALSE - 90.</param></member></member><member
name="M:AfxRegDeleteKey(HKEY__*,System.Char!System.Runtime.CompilerServices.IsConst*,ATL.CAtlTransactionManager*)"><member
name="M:AfxRegDeleteKey(HKEY__*,System.Char!System.Runtime.CompilerServices.IsConst*,ATL.CAtlTransactionManager*)"><summary><summary>Deletes
the specified registry key.</summary></summary><returns><returns> If the function succeeds, the return
value is ERROR_SUCCESS. If the function fails, the return value is a nonzero error code defined in Winerror.h</returns></returns><param name="hKey" /><param
name="hKey">A handle to an open registry key.</param><param name="lpSubKey"
/><param
name="lpSubKey">The name of the key to be deleted.</param><param name="pTM" /><param
name="pTM">Pointer to CAtlTransactionManager object</param></member></member><member
name="M:AfxRegOpenKeyEx(HKEY__*,System.Char!System.Runtime.CompilerServices.IsConst*,System.UInt32!System.Runtime.CompilerServices.IsLong,System.UInt32!System.Runtime.CompilerServices.IsLong,HKEY__**,ATL.CAtlTransactionManager*)"><member
name="M:AfxRegOpenKeyEx(HKEY__*,System.Char!System.Runtime.CompilerServices.IsConst*,System.UInt32!System.Runtime.CompilerServices.IsLong,System.UInt32!System.Runtime.CompilerServices.IsLong,HKEY__**,ATL.CAtlTransactionManager*)"><summary><summary>Opens
the specified registry key.</summary></summary><returns><returns> If the function succeeds, the return
value is ERROR_SUCCESS. If the function fails, the return value is a nonzero error code defined in Winerror.h</returns></returns><param name="hKey" /><param
name="hKey">A handle to an open registry key.</param><param name="lpSubKey"
/><param
name="lpSubKey">The name of a key that this function opens or creates.</param><param name="ulOptions"
/><param
name="ulOptions">This parameter is reserved and must be zero.</param><param name="samDesired" /><param
name="samDesired">A mask that specifies the desired access rights to the key.</param><param
name="phkResult" /><param
name="phkResult">A pointer to a variable that receives a handle to the openedkey.</param><param
name="pTM" /><param
name="pTM">Pointer to CAtlTransactionManager object</param></member></member></members>

Hi stejsky,
Thank you for posting in MSDN forum.
>>In my project I use the option /doc to generate XML doc file from my source codes but unfortunately in the output XML file there are mixed also comments from original MFC source codes.
Based on your issue, could you please tell me how you use the option /doc to generate XML doc file from your source codes?
If you use the option /doc to generate the XML doc file by right-click the your MFC project->Properties->Configuration Properties->C/C++->Output file->set the Generate XML document files as Yes(/doc) like the following screen shot.
(1)If yes, since we could not reproduce your issue in mu side, so if possible, I suggest you could share me your MFC project so that we will further help you support this issue.
You could upload your MFC project to the OneDrive and then copy link here.
(2)If no, please try the above way to generate XML doc file and then check if you still get same issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Conditional Form Fields in a Survey

I am putting together our employee satisfaction survey and need some help. Employees will be asked to tell us how to satisfied they are with some aspects of the company. For example:
Question 1:
Cost of health insurance for employees and families
Ranking:
-3 -2 -1 0 1 2 3
What I would like to do is that every time an employee ranks us lower than -1 for a text box to automatically pop for them to add comments or suggestions on how we can improve in this area.
Any suggestions?

With respect to Michael, there's no benefit to using LiveCycle Designer for this. It would be helpful if you clarified what you mean when you say you want a text box to automatically pop up. It is possible to prompt the user to enter something either using the app.response JavaScript method of by creating a custom dialog. Or you could instead create a text box near the question that appears when one of the negative options is selected. WHich would you prefer? I'd suggest the latter as the better option.

How can I make a survey automatically identify the user in the results?

How can I make a survey automatically identify the user in the results (so that it won't be anonymous)?

I am not sure what information to provide. Here is what I am trying to do. I am trying to create an HR questionnaire with multiple choice questions and several multiline textboxes to capture comments. I want to send it out by email address and/or embed the questionnaire somewhere on the company's intranet website. But we don't want the questionnaire to be anonymous. If someone makes a particular comment, we want to be able to communicate with the person who made that particular comment. How would we be able to trace the person? By email address, or by user ID?

Need help with arrays in a survey

I am making a survey using arrays to store the answers to 2 questions and output the frequencies of each answer, as well as the average rating for each question. When I do it in a structured manner, it works properly:
import java.text.DecimalFormat; //in order to format numbers
import javax.swing.*;
public class Music1
public static void main (String[] args)
    int iCount = 0, iResponsesSum1 = 0, iResponsesSum2 = 0, iParticipants;
    double dResponsesAve1 = 0, dResponsesAve2 = 0;
    String sInput = "", sOutput = "", sOutput1 = "";
    int frequency1[] = new int[6];
    int frequency2[] = new int[6];
    iParticipants = Integer.parseInt(JOptionPane.showInputDialog("Enter the number of participants\nin music taste survey:"));
    int responses1[] = new int[iParticipants];
    int responses2[] = new int[iParticipants];
    for (iCount = 0; iCount < responses1.length; iCount++)//for loop
      responses1[iCount] = Integer.parseInt(JOptionPane.showInputDialog(null, "Please rate Rave music (1: awful - 5: great):", "Participant #" + (iCount + 1) + ":", JOptionPane.QUESTION_MESSAGE));//display first input box
      responses2[iCount] = Integer.parseInt(JOptionPane.showInputDialog(null, "Please rate Rock & Roll music (1: awful - 5 great):", "Participant #" + (iCount + 1) + ":", JOptionPane.QUESTION_MESSAGE));//display second input box
      ++frequency1[responses1[iCount]];
      ++frequency2[responses2[iCount]];
      iResponsesSum1+= responses1[iCount];//sum answers for first question
      iResponsesSum2+= responses2[iCount];//sum answers for second question
    }//end for loop
    for (int rating = 1; rating < frequency1.length; rating++)
      sOutput1+= " Participants who left rating " + rating + " \t" + frequency1[rating] + "\t" + frequency2[rating] + "\n";
    }//end for loop
    dResponsesAve1 = iResponsesSum1/(double)(responses1.length);
    dResponsesAve2 = iResponsesSum2/(double)(responses2.length);
    DecimalFormat myFormat = new DecimalFormat("0.00");
    sOutput = "\tMusic Survey Results\n\n\n\n" +
       " Number of participants: " + iParticipants + "\n\n" +
       " Rave average rating: " + myFormat.format(dResponsesAve1) + "\n" +             " Rock average rating: " + myFormat.format(dResponsesAve2) + "\n\n\n" +
       "\tRatings by music:\n\n" +
       "\t\t" +
       "Rave\tRock" + "\n" +
       sOutput1 + "\n";
    JTextArea outputArea = new JTextArea(20, 15);
    outputArea.setText(sOutput);
    JOptionPane.showMessageDialog(null, outputArea, "Music Survey", JOptionPane.PLAIN_MESSAGE);//output the message
System.exit(0);//exit the program
}//end main
}//end classNow, the problems start when I try to transform that into classess that create survey object and methods to be performed on that object.
import java.text.DecimalFormat;
import javax.swing.JOptionPane;
public class Music
     public int iCount;
     public int iRating;
     private int iResponsesSum1;
     private int iResponsesSum2;
     private int iParticipants;
     private double dResponsesAve1;
     private double dResponsesAve2;
     private String sInput;
     private String sOutput1;
     private String sOutput;
     private int responses1[];
     private int responses2[];
     private int frequency1[];
     private int frequency2[];
     public Music()
          setParticipants();
          iCount = 0;
          iRating = 0;
          iResponsesSum1 = 0;
          iResponsesSum2 = 0;
          iParticipants = 0;;
          dResponsesAve1 = 0;
          dResponsesAve1 = 0;
          iParticipants = 0;
          sInput = "";
          sOutput = "";
          sOutput1 = "";
          responses1 = new int[iParticipants];
          responses2 = new int[iParticipants];
          frequency1 = new int[6];
          frequency2 = new int[6];
     public void setParticipants()
          iParticipants = Integer.parseInt(JOptionPane.showInputDialog("Enter the number of participants\nin music taste survey:"));
     public int getParticipants()
          return iParticipants;
     public void setResponses1()
          for (iCount = 0; iCount < responses1.length; iCount++)//for loop
               responses1[iCount] = Integer.parseInt(JOptionPane.showInputDialog(null, "Please rate Rave music (1: awful - 5: great):", "Participant #" + (iCount + 1) + ":", JOptionPane.QUESTION_MESSAGE));//display first input box
     public void setResponses2()
          for (iCount = 0; iCount < responses1.length; iCount++)//for loop
               responses2[iCount] = Integer.parseInt(JOptionPane.showInputDialog(null, "Please rate Rock & Roll(1: awful - 5: great):", "Participant #" + (iCount + 1) + ":", JOptionPane.QUESTION_MESSAGE));//display second input box
     public void setFrequency1()
          ++frequency1[responses1[iCount]];
     public void setFrequency2()
          ++frequency1[responses1[iCount]];
     public void setSum1()
          iResponsesSum1+= responses1[iCount];//sum answers for first question
     public int getSum1()
          return iResponsesSum1;
     public void setSum2()
          iResponsesSum2+= responses2[iCount];//sum answers for first question
     public int getSum2()
          return iResponsesSum2;
     public void setFrequenciesByRating()
          sOutput1+= "Participants who left rating " + iRating + "               " + frequency1[iRating] + "                        " + frequency2[iRating] + "\n";
     public String getFrequenciesByRating()
          return sOutput1;
     public double getAverage1()
          dResponsesAve1 = getSum1()/(double)(responses1.length);
          return dResponsesAve1;
     public double getAverage2()
          dResponsesAve2 = getSum2()/(double)(responses2.length);
          return dResponsesAve2;
     public String toString()
          DecimalFormat myFormat = new DecimalFormat("0.00");
          sOutput = "                        Music Survey Results\n\n\n\n" +
               "Number of participants: " + getParticipants() + "\n\n" +
               "Rave average rating: " + myFormat.format(getAverage1()) + "\n" +
               "Rock average rating: " + myFormat.format(getAverage2()) + "\n\n\n" +
               "                        Ratings by music:\n\n" +
               "                                                          " +
               "Rave       Rock" + "\n" +
               getFrequenciesByRating() + "\n";
          return sOutput;
}Here is what I have for the main program:
mport java.text.DecimalFormat; //in order to format numbers
import javax.swing.JOptionPane;
public class MusicApp
     public static void main (String[] args)
          int iCount = 0, iRating = 0;
          int responses1[] = new int[6];
          Music survey = new Music();
          for (int iCount1 = 0; iCount1 < responses1.length; iCount1++)
               survey.setResponses1();
          for (int iCount2 = 0; iCount2 < responses1.length; iCount2++)
               survey.setResponses2();
          for (int iCount3 = 0; iCount3 < responses1.length; iCount3++)
               survey.setFrequency1();
          for (int iCount4 = 0; iCount4 < responses1.length; iCount4++)
               survey.setFrequency2();
          for (iRating = 1; iRating < responses1.length; iRating++)
               survey.setFrequenciesByRating();
          JOptionPane.showMessageDialog(null,survey.toString(), "Music Survey", JOptionPane.PLAIN_MESSAGE);//output the message
          System.exit(0);//exit the program
}This obviously doesn't work, it gives me an ArrayIndexOutOfBoundsException.
I tried to twist it in every way I could think of, but I still couldn't get it to work. I would like the program to run as it does in the structured form.
I think I have a problem with the scope of the variables, but I am really not sure, that's why I hope that someone can give me some insight into what I am doing wrong.
So, please, any constructive comment or advice is greatly appreciated.

By the way, have a good look at your Music constructor:
setParticipants(); //this will only be called once!
iCount = 0;
iRating = 0;
iResponsesSum1 = 0;
iResponsesSum2 = 0;
iParticipants = 0;; //double semicolon :)
dResponsesAve1 = 0;
dResponsesAve1 = 0;
iParticipants = 0; //!!
sInput = "";
sOutput = "";
sOutput1 = "";
responses1 = new int[iParticipants]; //this creates an array of int with size 0 (see iParticipants)
responses2 = new int[iParticipants]; //idem
frequency1 = new int[6]; //this creates an array of size 6 [0,0,0,0,0,0]
frequency2 = new int[6]; //idem

How to unsubscribe from blog comments?

I've posted a comment on a blog and got subscribed for the comments, but now I don't care to receive those emails anymore and would like to unsubscribe.
The email reads: "To stop receiving notifications about this or other Weblogs, go to http://www.sdn.sap.com/irj/scn/sdnweblogs/bloggerhome and select "Comment Notifications".
But when I click on the link, it takes me to 'Blogger Home' and wants me to fill in some form ("Thank you for your interest in becoming an Weblogger/Podcaster..."). There is no "Comment Notifications" link anywhere on the screen. There is also nothing in my profile for blog subscriptions, similar to the forum watches.
Am I missing something or does email have an incorrect link? Thanks!

Well that was a first, and you are right, it sucks.
Even as a superadmin, I had a hard time trying to find out where to disable the notice. I finally found that one of your two userids, S0004916999, has a notice activated for a weblog on the 2010 SCN survey. There is no way you would have been able to get to the interface to shut it off. I did so.
In future, if you run in to site problems, please write to [email protected]
BR
David

Hyperlink in comment is not reported by Word object model

I believe this is a bug with Word. I have verified with Word 2010 & 2013. I did not test with any other version.
If a hyperlink in a comment is the first thing in the comment, the Word object model does not report that there is a hyperlink in the comment. If I modify the comment and add any text (including a space)
before the link, the link will be reported by the object model.
Steps to reproduce:
in a document, go to Review Ribbon and select "New Comment"
type in text, select text, and insert hyperlink (Ctrl+k), in address field add http://www.google.com
Add a new macro that will loop through the comments and report if a hyperlink is found, see code below
I also verified using VSTO the same behavior
Dim doc As Document
Set doc = ActiveDocument
Dim link As Hyperlink
Dim comment As comment
For Each comment In doc.Comments
On Error Resume Next
If Not comment.Range Then
For Each link In comment.Range.Hyperlinks
MsgBox "Link found in comment"
Next link
End If
Next comment
Byron

Hi Byron,
Based on the description, you can’t detect the hyperlink in the comments if the hyperlink is at the beginning of the comment. I can’t reproduce the issue by following the steps above like figure below:
The version of Word application is like figure below:
I suggest you trying to update the Office to the latest version to see whether this issue is fixed.
Hope it is helpful.
Best regards
Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Comment on survey

Similar Messages

Maybe you are looking for