Comment sortir une photo de lightroom sans perdre les modifications par exemple la mettre sur le bureau

Comment sortir une photo de lightroom sans perdre les modifications ,si je la fait glisser sur le bureau les modifications n'y sont plus et j'obtiens le fichier d'origine ?

I don't think you should ever drag a photo from Lightroom to somewhere else.
The proper way is to select the file in Library (in the Film Strip at the bottom of the window). Then press the button "Export". You will then get a dialogue box. Type in the information for the place where you want to save it. Press the button "Export". The changed (edited) photo will then be where you told it to be saved.
(I am a beginner in Lightroom but think the above is correct)

Similar Messages

  • Comment changer mon compte iCloud sans perdre les données de mon iPad?

    Comment changer mon compte iCloud sans perdre les données de mon iPad?

    Merci de votre réponse.
    Entre-temps, j'ai fais un essai sur quelques unes de mes images selon la procédure décrite plus haut.
    Il semble que je n'ai rien perdu. Dans le nouveau catalogue créé, les images dont les originaux ont été déplacés ont conservé leurs mots clés
    Je retrouve dans le catalogue d'origine les aperçus dynamiques de mes originaux.
    Quelque chose m'a-t-il échappé ?
    L'idée de créer un seul catalogue général m'interpelle dans le sens où celui-ci comprendrait plusieurs centaines de milliers d'images...
    Comment gérer cela ?
    Par avance merci de votre aide
    AB

  • Désinstaller une version antérieure sans perdre sa licence

    Bonjour à tous,
    je viens d'acquérire PSE 13 et j'aimerais désinstatller en le désactivant PSE 12.
    Je ne trouve pas la solution pour effectuer cette opération.
    Quelqu'un peut-il m'aider ?
    D'avance merci
    Cordialement
    Les2C83

    S'il vous plaît suivre les étapes suivantes pour résoudre le problème.
    1. Téléchargez et exécutez propre outil qui j'ai donné dans le post ci-dessus.
    2. Télécharger et installer Adobe Application Manager. S'il vous plaît voir le lien ci-dessous pour le télécharger.
      http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
    3. Après avoir réussi à l'installer, ouvrez l'invite de commande.
    4. Dans l'invite de commande, accédez au dossier où vous avez le fichier msi pour Acrobat et exécutez-le, s'il vous plaît ajouter IGNOREAAM = 1 dans la déclaration
    exemple:
    msiexec / i acropro.msi IGNOREAAM = 1

  • Dsc comment rendre une image sous forme de bouton

    bonjour,
    je veux créer une interface sur labview en utilisant le module DSC.
    grace à la bibliothéque DSC je peux avoir simplement des images.
    je veux savoir comment je peux rendre ses images sous formes de boutons booleens qui appraraissent sur mmon diagramme pour que je puisse les commandes 
    donc au lieu d'avoir une simple image sur ma face avant d'un moteur par exemple, je veux pouvoir cliquer sur ce moteur pour le commande ou bien l'arreter en diré un bouton booleen mais affiché sous forme de moteur
    merci de m'aider 
    Solved!
    Go to Solution.
    Attachments:
    moteur.png ‏63 KB

    Hi,
    You should have posted this message in the french section of the forum
    Anyway...
    LabVIEW permet de personnaliser les commandes, par exemple l'aspect d'un bouton booléen.
    1) Placer sur la face-avant du VI un bouton booléen de la taille voulue et sélectionner "Personnaliser..." dans le menu local ;
    2) Dans la fenêtre de commande qui s'ouvre, un clic droit sur le bouton permet d'importer une image pour chaque état (Vrai ou Faux) du booléen ;
    3) Enregistrer la commande modifiée (à la fermeture du fichier .ctl, on peut remplacer ou non la commande initiale sur la face-avant).
    En pièce jointe, un exemple de ce que ça peut donner avec tes images de moteur. On peut faire mieux en important des images au format PNG permettant notamment d'avoir un fond tansparent, mais je n'ai pas le logiciel ad hoc sous la main...
    HL
    Attachments:
    Etape_1.png ‏16 KB
    Etape_2.png ‏12 KB
    Commande.ctl ‏6 KB

  • Comment telecharger une video depuis you tube

    comment telecharger une video depuis you tube?
    je n'arrive pas à le faire sur mon MAC alors que je pouvais le faire sur windows avec REAL PLAYER

    Are you using the latest version of Adobe Flash Player?  Have you tried using other browsers?  Your issue could be browser issue if not a flash issue. 

  • J'ai installer l'iOS 7.1 il y a quelque jours mais je regrette beaucoup,je n'aime pas du tout leur nouvelle touche pour repondre ou raccrocher le téléphone,comment je peux faire pour retrouner à l'iOS d'avant sans perdre toute mes appli,photo,contact,ect?

    J'ai Installé l'iOS 7.1 il ya quelque jours maisje regrette beaucoup, je n'aime pas du tout leur nouvelle touches pour repondre ou raccrocher le téléphone, comment je peux faire pour retrouner à l'iOS d'avant sans perdre toute mes appli,photos,contacts,musique,SMS, etc?
    Je suis une débutante alors je suis un peu perdue, merci d'avance.

    uneprincesse wrote:
    comment je peux faire pour retrouner à l'iOS d'avant sans perdre toute mes appli,photos,contacts,musique,SMS, etc?
    Il ne se peux pas retourner a un version d'avant.

  • Comment retrouver sur Mac la date de prise de vue d'une photo modifiée par Lightroom

    Lue sur une carte et stockée dans un fichier sur le Finder, une photo possède une date de prise de vue. Dès qu'elle est modifiée par Lightroom et exportée, la date de prise de vue est modifiée et devient la date de l'export de la photo.
    Ce problème est celui de l'interface Lightroom - Mac.
    Je ne dois pas être la seule à avoir ce problème.
    Je vous remercie par avance de toute solution que vous me proposerez.
    Cordialement
    Hélène Fallour

    Merci beaucoup pour cette aide.
    Hélène Fallour
    Le 28 juin 2014 à 12:23, TonyPT <[email protected]> a écrit :
    Comment retrouver sur Mac la date de prise de vue d'une photo modifiée par Lightroom
    created by TonyPT in Photoshop Lightroom - View the full discussion
    S'il vous plaît voir ce post. Mais il est en anglais
    .Keeping creation date when exporting to jpeg
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6505147#6505147
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Lightroom by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Comment réinstaller OS X MOuntain Lion sans perdre mes fichiers

    J'aimerais savoir comment on peut réinstaller OS X Mountain Lion sans perdre ses données (photos, musique, etc.)?

    Utilisez Microsoft Office 2008 ou plus récent ou un produit tel que TextEdit, OpenOffice, LibreOffice ou.
    (85204)

  • Comment exporter des photos avec des corrections réalisés dans Lightroom vers Photoshop ?

    Bonjour, quelqu'un pourrait me dire
    Comment exporter des photos avec des corrections réalisés dans Lightroom vers Photoshop ?
    A chaque fois que je fais cette maneuvre, je perds systématiquements tous les réglages de Lightroom,et mon fichiers une fois dans ouvert dans Photoshop redevient  vierge. !

    Once you've made all the LR corrections you want, right click on the image and chose Edit In Photoshop.
    If Photoshop does not come up as the default external editor, go to LR>preferences>ExternalEditors tab and chose PS as your external editor. Once you make your edits in PS, be sure to SAVE (not SaveAs) and the file will go back to LR and be included in your catalog.
    Hope the adobe translator works on my reply - it worked fine on your message :-)
    Cheers,
    Tom

  • I am having trouble syncing photos with lightroom mobile. Lightroom (on computer) tells me that it's syncing but nothing appears on my I pad. Any comments?

    I am having trouble syncing photos with lightroom mobile. Lightroom (on computer) tells me that it's syncing but nothing appears on my I pad. Any comments?

    however when I try to sync my older ipod with it and upload some new music to it, Itunes keeps telling me that all the previous songs will be erased
    Yes, that's correct. If you don't have the songs that are currently on your iPod also in your new iTunes installation, they will be erased from the iPod if you sync it. Best to start afresh by first transferring all the music on your iPod back to your new computer/iTunes library.
    For iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
    Find out how to do that here.
    How to copy iTunes purchases from an iPod or iPhone to a computer.
    For all other non purchased content (your own CDs etc), check out the instructions/suggestions here.
    Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it is a little more involved than other methods.
    Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
    One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
    Other free programs are Pod Player, SharePod and Floola.
    If you want to recover just the structure of playlists from the iPod (and not the actual song files themselves), there's iRepo for Windows. which I understand has this feature along with all the standard features for these programs.
    iPodRip also has the feature enabling you to reconstruct playlists.
    There is also CopyTrans. This does preserve ratings/playcounts etc if those are important to you but this program is not free. It also supports video transfer.
    Once all the music is safely back in your new iTunes library, you can sync your iPod as normal.

  • Comment je dois procéder pour telecharger mon logiciel lightroom sur un 2e ordinateur il est maintenant installer sur un imac et je voudrais le mettre sur mon portable et avoir tout les photos avec le modification qui ont été apporter dans le logiciel. qu

    Comment je dois faire pour installer mon logiciel lightroom sur mon portable il est actuellement sur mon imac et je voudrais avoir sur mon portable avec tout les photos qu'il contient dans la bibliothèque avec les modifications qui ont été fait

    Lightroom - all versions
    Windows
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
    Mac
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

  • Comment débloquer Lightroom sans numéro de série lorsqu'on a souscrit au Programme de photographie Photoshop

    comment débloquer Lightroom sans numéro de série lorsqu'on a souscrit au Programme de photographie Photoshop ?

    Ask for serial number http://forums.adobe.com/thread/1234635 has a FAQ link
    or
    Chat Now button near the bottom for Activation and Deactivation problems may help
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
    OR
    Asked to sign in after paying may help
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  • Comment récupérer toutes les valeurs de X et de Y de chaque épieux d une photo ?

    Bonjour a tous.
    Je vous adresse ce message en désespoir de cause je suis actuellement au Liban et je dois faire un programme sous LABVIEW, langage que je ne maîtrise absolument pas. Le but et de prendre une photo issue d un IRM et d isoler certaines zones plus claires dans cette image. Pour ce faire j ai mis limmage dans un tableau 2D que je balaye avec deux boucles for et japplique un seuillage a chaque Pixel. Cela marche a merveille mais maintenant il faudrait que je récupère chaque valeurs de X et de Y pour chaque pixel dit intéressant. Ceci afin de pouvoir du région growing. C est ici que ca bloque. Je ne connais pas tous les outils Labview et j ai notamment beaucoup de mal avec les tableaux. Mon idée étais de mettre une boucle conditionnelle et si mon pixel vérifie la condition du seuillage mettre en mémoire dans un tableau les valeurs de X et de Y. Je ne vois pas comment réaliser cela car quand jessaie de faire un tableau autot indexe a partir de la boucle for mais celui ci ne dépasse pas les 198 valeurs ce qui équivaut a la largeur de la photo. Or pour chaque pixel dit intéressant il me faut la valeur de X et de Y. Si vous voyez comment faire ou si vous pensez a une autre solution je suis tout ouïe.
    Voici un imprim écrans de la solution que je voudrais mettre en ouvre Si vous voulez dautres information n hésitez pas a demander.
    Veuillez excuser l orthographe mais je ne dispose pas de toutes les marques de ponctuation sur ce clavier. Merci d avance pour ceux qui pourrons maider
    Attachments:
    Untitled.png ‏15 KB

    Bonjour,
    Je vous conseille de regarder ce lien, si vous débutez en LabVIEW.
    http://zone.ni.com/devzone/cda/tut/p/id/7466
    Cordialement
    Samuel G. | Application Engineer Team Leader
    Certified LabVIEW Developer
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    Été de LabVIEW 2014
    12 présentations en ligne, du 30 juin au 18 juillet

  • J'ai acheté une application avec mon compte sur le mac d'un ami, comment je peux la mettre sur mon mac sans l'acheter de nouveau?

    J'ai acheté une application avec mon compte sur le mac d'un ami, comment je peux la mettre sur mon mac sans l'acheter de nouveau?

    I catch an app with my account with my friend's macbook . How can I put it on my mac without rebuying it

  • Comment afficher la date d'une photo

    Bonjour,
    je voudrais savoir si il est possible d'afficher la date, l'heure et le poids d'une photo.
    Si oui comment faut-il faire?
    Cordialement

    The Print button in the "3-bar" Firefox menu button drop-down list opens the Print Preview window.
    You can click the Print button in the Print Preview window or use the Print item in the File menu (File > Print) or use the Ctrl+P shortcut to have access to the print selection item and other print setup options.
    * Tap the Alt key or press F10 to show the Menu bar.
    See also:
    *Universal Print: https://addons.mozilla.org/firefox/addon/universal-print/

Maybe you are looking for

  • Contacts Synching problem with windows address book

    today i updated my itunes to ver 10, and updated my iphone os to ver 4.1, when i tried synching my contacts to windows address book, nothing happens, before today's update, i used to get a message while synching the contacts, that say eg. 25 contacts

  • IPad Screen Problem...HELP ME!!!

    i was using my iPad today just looking through pictures with friends. i shut it off then when i turned it back on for some reason a whole section of the screen is negative.if your at the home screen the strip is right around the second line of apps.

  • Previous button clears my online form...

    I'm using MIE 9 and I have created a form of 5 pages. when I want to see my answers for example on the first page and i hit previous to go back the form clears it self... Is this still the same problem as here? http://forums.adobe.com/message/4434484

  • 2d graphics in JLayeredPanes

    Hi! I am new to Swing. Hope you guys can help me out. I'm currently working on a JApplet that contains a JLayeredPane. I want to draw some 2d graphics (lines, dots, rectangles,...) on the DEFAULT_LAYER or FRAME_LAYER of the JApplet and then add anoth

  • ADF Faces & BC JDeveloper 10.1.3.4: af:menuTab in multiple rows.

    Hi all, We have a dynamic menu design in our application that is defined within the faces-config.xml file. The menu tabes are rendered in a single row, are there any ways to split these tabs into multiple rows (as more are necessary)? <f:facet name="