Comment téléchager l'IOS d'un Router sans le Service Contract:

Bonjour à tous,
Je travaille pour une organisation humanitaire au Tchad, à la frontière avec le Soudan en vue d'apporter de l'aide aux réfugiés soudanais du Darfour. J'ai reçu il y a quelques jours des routers CISCO 881SRST et j'ai besoin d'un IOS.
J'essaie de le téléchager depuis maintenant trois jours sans succès car je n'ai pas de Service Contract, je suis juste en charge du service informatique et télécoms sur le terrain, alors que les achats sont faits depuis Genève par une personne que je ne connais pas.
Quelqu'un pourrait-il me dire comment faire pour en avoir un? où encore comment pouvoir télécharger cette IOS autrement?
Je reste à votre écoute et merci à l'avance.
Joël Etoundi.

uneprincesse wrote:
comment je peux faire pour retrouner à l'iOS d'avant sans perdre toute mes appli,photos,contacts,musique,SMS, etc?
Il ne se peux pas retourner a un version d'avant.

Similar Messages

Today! I have a few comments about the objective error iOS 7.0

To contact Apple was difficult, because I have a few comments about the objective error iOS 7.0 operating system.
On iPhone 4s, iPhone 5, this operating system slowly when I touch to apple apps such as notes, compass, telephone, ... very slowly. Also as simple to use application photo of about 4 minutes, iOS 7.0 on iPhone 4s was overheat and battery from 100% use 4 minutes to 96%, so quickly. In the lock screen (not control center) when playing song, I just press forward 1 song very difficult, strong problem. On Safari, I can not adjust the font size in Reader. why have app Facetime on iPhone 4, iPhone 4s?
Hopefully, Apple can continue to fix bugs in iOS 7 for the client and myself. On the iPad 3 and iPad 4 are also many more errors such as freezes, slow to open applications, the iOS app does not fit 7 tablet.

To contact Apple was difficult, because I have a few comments about the objective error iOS 7.0 operating system.
On iPhone 4s, iPhone 5, this operating system slowly when I touch to apple apps such as notes, compass, telephone, ... very slowly. Also as simple to use application photo of about 4 minutes, iOS 7.0 on iPhone 4s was overheat and battery from 100% use 4 minutes to 96%, so quickly. In the lock screen (not control center) when playing song, I just press "back" 1 song very difficult, strong problem. On Safari, I can not adjust the font size in Reader. why have app Facetime on iPhone 4, iPhone 4s?
Hopefully, Apple can continue to fix bugs in iOS 7 for the client and myself. On the iPad 3 and iPad 4 are also many more errors such as freezes, slow to open applications, the iOS app does not fit 7 tablet.

What are the following:1)Cisco 1600 Series IOS WIRELESS LAN RECOVERY. 2)Service Provider Option 60 for Vendor Class Idenfier

What are the following:1)Cisco 1600 Series IOS WIRELESS LAN RECOVERY. 2)Service Provider Option 60 for Vendor Class Idenfier
These items are listed with 1600 series AP but I'm unable to understand what are these things & the use of them

DHCP Option 60: Go HERE.

Why i can't download IOS = "Service contract required" ???!!!

Hi,
I try to update IOS for my router (Cisco 2821 ).
When i click to download button, i receive this message : Service contract required
What can i do for upgrade IOS on my hardware ? Is it needed to pay for this ? WTF ?
Thks for your advise in advance.
Best Regards.

Just for the record, let me clarify some terminology.
An update is when you get software of a newer version but the mostly same capbility.
An upgrade is when you get software of substantially improved capability or new features in a feature family.
A feature set upgrade is when you move up to a different licensed set of features.
In general, service contracts will get you updates and ugrades, but feature set upgrades will require a purchase (just like going from Windows Home to Windows Ultimate, for example)
The issue that Leo refers to was the January 2011 change where software center started a more rigourous enforcement of access based on covered products, which prevented users from downloading software for devices and device families for which they had no service contract. Customers have always needed a service contract to download Cisco IOS; the change merely disabled the ability to inadventently download software for which no active service contract existed.
For more details on the Software Download center, please see
http://www.cisco.com/web/Downloads/SDS/Software_Downloads/FAQs.html

Comment mettre des films ou des series sur itunes sans les acheter ?

comment mettre des films ou des series sur itunes sans les acheter ?

iPhone and iPad's acceptable movie formats are MOV, M4V and MP4. You will have to find a third party Video converter to convert the format from AVI to MP4 or M4V.
A good and free one is called Any Video Converter, you can download from CNET's Download.com from this link:
http://download.cnet.com/Any-Video-Converter/3000-2194_4-10661456.html?tag=mncol ;7

Is it permissible to offer free IOS apps backed by paid subscription services?

Hello,
I was wondering if it's permissible according to Apple's guidelines and standards to offer free IOS apps that interact with online services that are paid for outside of the Apple ecosystem. Apps for Netflix and Dropbox, to name a few, seem to suggest this is perfectly reasonable. I was hoping that someone could point me towards the appropriate standard or guideline that spells this out expliclty.
Thanks in advance,
Mike

I must apologize for my reply. Somehow I read that you were looking to use a 3rd party advertising platform. I don't know where that came from.
You can certainly connect to a non-Apple, paid service. What trips people up is that you can't have a link to sign up for said paid service. If users are able to sign up directly in the app, they must do it through the App Store. It is a very good idea to have a native login to said service as well. If you use WebKit then the website could display a "sign up now" button that would get your app rejected.
All of the details are in the guidelines and developer agreement. You need a developer account to see them but people have posted then all over the Internet. In the developers site, they are listed right up at the top.

View PDF comments in Adobe Reader for iOS

Adobe Reader XI for Mac and PC can display a "Comments List" to show all of the comments that have been added to the document using the annotation features. Clicking on a comment scrolls the PDF document to where the comment was entered.
Could this feature be added to Adobe Reader for iOS so that comments added in the Mac / PC versions can be viewed on an iPad?

Hi,
A Comments list has been on our feature ToDo list for quite some time now. Unfortunately, it has not made it into the product yet.
Thank you for the feedback!

Comment repasser a ios 6.1.3 sans shsh ?

Bonjour !
J'ai un iphone 4 GSM et j'ai recemment effectuer la mise a jour iOS 7.
Malheuresement et contre tout attente, se iOS 7 et l'iphone 4 sont compatible mais de nombreux ralentissement apparaissent !
Je voudrais repasser a iOS 6.1.3 mais je n'ai pas de SHSH ...
Aidez moi S'il Vous Plait !

No se puede regresar a iOS 6.

J'ai éffacer facebook et depuis ios a changer du coup je ne peut plus le télécharger comment je fais pour changer ios ?

S'il vous plait aidé moi?

Google translate.
I erase and facebook ios has changed since the sudden I can not download it how do I change ios?
You are out of luck unless you have a copy of the version of the FaceBook app that was compatible with your 2G iPod.
A 2G iPod can only go to iOS 4.2.1.
Identifying iPod models

Comment activer airplay avec keynote ios et un ipad 1 ?

Bonjour,
Mon ipad 1 fonctionne très bien avec airplay pour diffuser des vidéos ou bien utiliser des applications qui gèrent airplay. Il semblerait que keynote gère maintenant airplay. Cela est-il uniquement valable avec un iPad 2 et la fonction miroir ou bien peut-on l'utiliser avec un ipad 1 et airplay classique?

up

ITunes match does not work on my iPhone 4S, but is working across all of my other Macs and iOS devices. All other iCloud services are working fine on the 4S - any suggestions?

iTunes match is not working on my iPhone 4S; it works awesome across all of my Macs and other iOS devices (iPad 2, iPod Touch 4g x 2, and my wife's iPhone 4). Any suggestions? Thanks!

It is not possible to "toggle back and forth" at will. If you associate a device with an Apple ID and you have iTunes Match enabled you must wait 90 days before you can associate it with another Apple ID. See this Apple KB article for more information: http://support.apple.com/kb/HT4627

Iphone 5 is still not staying connected to my carrier even after the ios 8 update. Says no service or searching..

So A few things occurred, I returned my Iphone 5 because of a defect in the sleep button last week, and then just got it back Monday. I went and got a new Sim Card activated at the AT&T store since the other was deactivated by rep on phone.(long story) Went home upgraded the phone to ios 8 and have my phone constantly searching for service or saying no service. I have done all trouble shooting on apple support and even had another sim card replace. Yesterday I updated to ios 8.2 and guess what it didn't do any good. AT&T stated last week my tower was having probs but the issue was fixed but lte had degrated and was still being worked on, I have not stayed in my city so I don't think that is the issue, I have no idea what to do now. Any suggestions?

My partner had this issue on the iPhone 6 a few days after moving from Windows phone. The move was seamless then no service at all. He called the service provider, they reactivated his phone/sim/whatever and it worked. Then, he had terrible signal issues, 1 bar in the house, the final problem was resolved by purchasing the 4G LTE Microcell. Now, even I have the best service I've ever had since 3G (I know, not saying much though FULL BARS NOW!)
Call AT&T from LAN Line with iPhone in hand.
Go to AT&T store and get the 4G LET Microcell (it's an LTE booster and easy to install.)

Ipad2 (3g WiFi) iOS 8.0.2 getting "No service" for 3G

Updated my iPad 2 (3G_WiFi) to iOS 8 without significant problems. Then updated to iOS 8.0.2 and now I'm getting the infamous "No service" for 3G.

Hi there Glimfeather,
You may find the troubleshooting steps in the article below helpful.
Get help with the cellular data connection on your iPad (Wi-Fi + Cellular Model)
-Griff W.

IOS IPS 3845 router

The IOS IPS keeps failing. For some reason it sends the alerts to MARS and then all of a sudden the IPS is disabled on the interface. This config. was down through SDM.

CS-MARS also integrates tightly with Cisco's premier security management suite, Cisco Security Manager (CSM). This tight integration maps traffic-related syslog messages to the firewall policies defined in CSM that triggered the event. Policy lookup enables rapid, round-trip analysis for troubleshooting firewall configuration-related network problems, policy configuration errors, and fine-tuning defined policies.
http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/prod_tech_notes_list.html

Issue when update ios for 7206 router

hi all ,
the ios on router was 12.4
i put the ios
c7200p-adventerprisek9-mz.152-4.M5.bin
in disk2 , of router
and added
boot system flash disk2:/c7200p-adventerprisek9-mz.152-4.M5.bin
after that ,
i restarted the router
i have the followign logs :
7200Gateway#reload
Proceed with reload? [confirm]
*Jan 11 15:24:11.469: %SYS-5-RELOAD: Reload requested by m0ulngateway on console. Reload Reason: Reload Command.
*Jan 11 15:24:11.681: %BGP-5-ADJCHANGE: neighbor 213.244.66.77 Down Peer closed the session
System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
Socket jumper: not present Failsafe jumper: present = normal
FPGA revision 0x00000026
C7200 platform with 2095104 Kbytes of main memory
Readonly ROMMON initialized
Self decompressing the image : ################################################################################################################################# [OK]
%SYS-6-CLOCKUPDATE: System clock has been updated from 15:26:31 UTC Sat Jan 11 2014 to 17:26:31 Israel Sat Jan 11 2014, configured from console by console.
% No interface specified for interface_command
X121 address and queued type can not be configured on the same rotary group 1
%SYS-3-IMAGE_TOO_BIG: 'disk2:/c7200p-adventerprisek9-mz.152-4.M5.bin' is too large for available memory (46143512 bytes).
%SYS-6-READ_BOOTFILE_FAIL: disk2:/c7200p-adventerprisek9-mz.152-4.M5.bin File read failed -- Not enough space.
%SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
boot of "cisco2-C7200" using boot helper "bootflash:c7200p-kboot-mz.124-4.XD5.bin" failed
error returned: File read failed -- Not enough space
loadprog: error - on file open
boot: cannot load "cisco2-C7200"
System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
Socket jumper: not present Failsafe jumper: present = normal
FPGA revision 0x00000026
C7200 platform with 2095104 Kbytes of main memory
Readonly ROMMON initialized
Self decompressing the image : ########################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################### [OK]
*** No sreloc section
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, 7200 Software (C7200P-ADVENTERPRISEK9-M), Version 15.2(4)M5, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Fri 13-Sep-13 19:12 by prod_rel_team
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Installed image archive
Cisco 7206VXR (NPE-G2) processor (revision A) with 1966080K/65536K bytes of memory.
Processor board ID 13252317
MPC7448 CPU at 1666Mhz, Implementation 0, Rev 2.2
6 slot VXR midplane, Version 2.0
Last reset from power-on
PCI bus mb1 (Slots 1, 3 and 5) has a capacity of 600 bandwidth points.
Current configuration on bus mb1 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
PCI bus mb2 (Slots 2, 4 and 6) has a capacity of 600 bandwidth points.
Current configuration on bus mb2 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
Please refer to the following document "Cisco 7200 Series Port Adaptor
Hardware Configuration Guidelines" on Cisco.com <http://www.cisco.com>
for c7200 bandwidth points oversubscription and usage guidelines.
1 FastEthernet interface
3 Gigabit Ethernet interfaces
2045K bytes of NVRAM.
250880K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).
65536K bytes of Flash internal SIMM (Sector size 512K).
Warning: The CLI will be deprecated soon
'enable secret 5 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Please move to 'enable secret <password>' CLI
max-reserved-bandwidth 95
   ^
% Invalid input detected at '^' marker.
Press RETURN to get started!
============================
focusing on the red lines above .
is there ANY THING WRONG ?????
AFTER THat i have sh ver :
7200Gateway#sh version
Cisco IOS Software, 7200 Software (C7200P-ADVENTERPRISEK9-M), Version 15.2(4)M5, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Fri 13-Sep-13 19:12 by prod_rel_team
ROM: System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)
7200Gateway uptime is 10 minutes
System returned to ROM by reload at 17:24:07 Israel Sat Jan 11 2014
System image file is "disk2:/c7200p-adventerprisek9-mz.152-4.M5.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 7206VXR (NPE-G2) processor (revision A) with 1966080K/65536K bytes of memory.
Processor board ID 13252317
MPC7448 CPU at 1666Mhz, Implementation 0, Rev 2.2
6 slot VXR midplane, Version 2.0
Last reset from power-on
PCI bus mb1 (Slots 1, 3 and 5) has a capacity of 600 bandwidth points.
Current configuration on bus mb1 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
PCI bus mb2 (Slots 2, 4 and 6) has a capacity of 600 bandwidth points.
Current configuration on bus mb2 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
Please refer to the following document "Cisco 7200 Series Port Adaptor
Hardware Configuration Guidelines" on Cisco.com <http://www.cisco.com>
for c7200 bandwidth points oversubscription and usage guidelines.
1 FastEthernet interface
3 Gigabit Ethernet interfaces
2045K bytes of NVRAM.
250880K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).
65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
=====================
focus on bold line ,
did the router get the new iso without problems ????
wish to clarify
regards

You are right, whenever Cisco device boots, the IOS files gets loaded on the DRAM.
But in this process, some temporary files are also generated which gets saved in the flash/Disk, that’s the only reason you got these error messages. It’s not recommended at all to have less space in the Flash than what is recommended on Cisco.com. I would say please remove some files from Disk and have minimum 256 MB flash otherwise your router may drop into rommon mode at the time of next reload.
Well, it’s good to upgrade the bootstarp image too. Currently you are running 15.X IOS code, I would say run 15.X bootstarp image on the box.
You may download bootstarp image for 7206VRX NPEG2 from the link below:-
http://software.cisco.com/download/release.html?mdfid=282188585&flowid=1380&softwareid=280805685&release=15.2.4S4&relind=AVAILABLE&rellifecycle=ED&reltype=latest
If you want to know the procedure of the upgrade, click the link mentioned below:-
http://www.cisco.com/en/US/docs/ios/12_2/configfun/command/reference/frf010.html#wp1017654
-Amant

Comment téléchager l'IOS d'un Router sans le Service Contract:

Similar Messages

Maybe you are looking for