Commenting Not Allowed

I have converted several scanned checklists to form fillable PDF's using Designer. After converting them to form fillable I have inserted several check box objects so that our employees (who all have Adobe Standard) can fill out the check lists and save them and insert the filled out checklists into work binders. On occassion they need the ability to add comments to a section of the checklist and they all know how to use the commenting features. On most of the forms I created commenting is alllowed however on the last two that I created "Commenting Allowed" is marked as no in the security settings and I can't get this to change.
The only thing that I can think of that I changed on these is that I might have selected "Preserve Appearance" instead of "Maintain Editablity" in step two of the New Form Assistant.
Is there any way to enable the commenting on these files? One of them is 90 pages long and took a long time to add all the checkboxes to.
Thanks

Try to save it as a static form. Here's the email from our tech team:
"If he did just have him save it as a static form. The issue becomes one of how do we know where to put the comments if the page/section doesnt exist."
Mike
Mike Potter
Adobe Enterprise Developer Relations

Similar Messages

  • Commenting not allowed after emailing pdfs

    I am fairly new to acrobat.  I am trying to save illustrator files as pdfs in order for clients to comment with stickies on the file.  No matter what security settings I use after emailing the files my document settings change.... comments not allowed....???

    Wired_Bob wrote:
    The option to allow commenting is checked and the document is saved replacing the first exported doc.
    I guess that part of your terminology is confusing. What do you mean by "checked".
    To be sure we're on the same page, by "checked" you mean after opening in Acrobat you went to Comments>Enable for commenting and analysis in Adobe Reader, correct?
    The reason I ask is because if you open it in Acrobat and go to File>Properties and see that commenting is "allowed", that still doesn't mean that it is enabled for Reader users.

  • Commenting Not allowed, even in docs I create  Reader 8.1.1

    I cannot comment or bring up the comment menu in any document in Reader 8.1.
    I do not know what happened. And this is true for at least 2 computers in my house. We have Acrobat 6 installed as a PDF Creator. But even in documents I create and have no security enabled, the Reader 8.1 tells me the document has "commenting" - "not allowed." I have tried everything I can think of, even un-installing reader and then installing a fresh copy, but the reader still does not allow me to make comments,
    Any ideas?

    Good morning all,
    I believe the following information may be helpful, I came across this issue this morning and found that this works:
    Once you have completed your file in Acrobat Professional you need to open the "Comments" tab menu and choose "Enable for commenting and analysis in Reader" option.
    This will save your file again and once opened in Reader the commenting functions will be enabled.
    Why this is so when all security options in the Professional File are show 'allowed' is beyond my comprehension.
    Hope it helps.
    Cheers.

  • Comments Not allowed?

    Hello freinds,
    I have installed Adobe LiveCycle designer 8.2 in my windows 7 machine, i opened a brand new pdf and entered contact details, then am trying to write comments, but, when i saw its peoperties, i noticed that COMMENTS: NOT ALLOWED under security tab!! Pls. let me know how i can enable and so that i can write comments.
    Thank you

    Hi Srinivas,
    Just to add my bit to the discussion, which is the same as what George and Chuck are saying.
    The issue is that the form is opening in the free Adobe Reader (even if opening in a browser, the Reader is still being used). As a result certain functionality is not available.
    For example, if the form is not Reader Enabled, then users with Reader will not be able to add comments to the form.
    Even if the form is Reader Enabled, if the form was originally saved as a Dynamic XML Form (in the LiveCycle Designer save-as dialog), then you will not be able to add comments.
    When working with forms that are created in LiveCycle Designer, you can only add comments where the form was originally saved as a Static PDF Form in the save-as dialog.
    Here is a summary. I suspect that your form is in Option 2, that is the form is not Reader Enabled and is opened in Reader.
    http://assure.ly/etkFNU.
    In addition there is a long discussion here: http://forums.adobe.com/message/2686010#2686010
    Hope that helps,
    Niall

  • XML-comments not allowed in IDOC_AAE-Adapter?

    Hi,
    we have a File to IDOC scenario and are using the IDOC_AAE adapter for sending IDOCs to the SAP system.
    In our mapping we have added some comments into the XML-IDOC-structure.
    By sending the document to the SAP-system we are getting the following error:
    MP: exception caught with cause
    com.sap.aii.af.idoc.exception.IDOCAdapterException: Error before sending due to
    idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE: Invalid XML 1.0 character
    encountered within IDocXML for type <INVOIC01>:
    state=READING_FIELD_STARTTAG, charPosition=872, lineNumber=23, columnNumber=14,
    invalidChar=U+0021,
    sourceSnippet=...RCY>^~~~<KUNDEUINR>DEXXXXXXX</KUNDEUINR>^~~~<BSART>INVO</BSART>^~~~<!--
    ZIM_IDOC_RBU_HEAD_S -->^~~... ^
    The problem seems to be the <!-- - Tag in the structure.
    But the ! (U+0021) is a correct XML 1.0 character. I don't know why the IDOC-XML parser throws this exception.
    Does anybody have an idea what the problem is?
    When we remove the comments the IDOC could be sent successfully to the SAP system.
    Are only IDOC-specific characters allowed here, no comments and no other XML-specific characters and structures?
    This would be very strange.
    Thanks for your answer.
    Regards
    Thorsten

    Hi Anoop / Ilayarajan,
    Could you please post the solution for this error. When I provision a user to PeopleSoft, I am getting similar error: com.waveset.util.WavesetException: An error occurred adding user "userID' to resource 'PeopleSoft Component Interface'. com.waveset.util.XmlParseException: XML Error: 1:1: Content is not allowed in prolog.
    Thanks
    User_idm

  • As a new Macbook Pro user I was saddened to find that the feature of using keywords in iPhoto '11 does not allow showing same under each photo.  I understand this was available in earlier versions.  Any comments?

    As a new Macbook Pro user I was saddened to find that the feature of using keywords in iPhoto '11 does not allow showing same under each photo.  I understand this was available in earlier versions.  Any comments?

    Against TOU which you "agreed" to in order to post in these user to user forums.  If you want to "suggest" something to Apple, do so in the Product Feedback area.

  • Acrobat Reader 9.0 PDF - Commenting property "Not Allowed"

    Hi,
    I saved a document in Illustrator as PDF but unfortunately the Commenting property is set to "Not Allowed" and I cannot mark-up the file in Acrobat Reader. What is strange is all properties are set to "Allowed" when I open the same document in Acrobat Pro!
    Can I do anything in Illustrator or Acrobat Reader in order to have this Commenting property set to "Allowed"?
    For info, I am using Illustrator CS2 and Acrobat Reader 9.0
    Cheers!

    This is normal. Reader cannot normally add comments.
    HOWEVER, a file can be prepared in Acrobat Pro (See the Comments menu)
    so Reader can add comments. This locks out certain other things: read
    the warning carefully.
    Aandi Inston

  • IWeb does not allow me to 'allow comments' via the 'inspector' to my website

    iWeb does not allow me to use the inspector ' blog ...allow comments' in order for me to make comments available on my pages on my website at mobileme

    Try resetting your Apple ID password that is associated with your iCloud account >  Apple - My Apple ID

  • Adobe Pro not allowing me to comment????

    I received a PDF that has no restrictions and when I got to select the Markup Tool or Sticky notes, they are dark and not allowing me to selct them.  I went into the Customize toolbars and selected all the tools I want to allow but I still unable to select the tools.
    any ideas?

    Well you say "Adobe Pro" but you're in the Reader forum. Can I assume you mean that you have Reader?
    If so, those tools won't be active until someone with Adobe Acrobat enables the PDF so that Reader users can use them.

  • "Content is not allowed in prolog" with SOAP Attachment

    I'm writing an application using SAAJ that sends a soap message to a servlet which responds with some information, including HTML which the client application will display. The HTML has to go into a SOAP attachment so the tags won't get confused with XML.
    I had the whole thing working with plain text sending within a normal node, and I only switched a few lines to make that text an attachment with HTML instead, but now I'm getting the exception "Content is not allowed in prolog" on the Client side when it tries to create the envelope from the SOAPMessage.
    Code for building answering SOAPMessage with attachment (Servlet to Client)
         public static SOAPMessage buildXML(Message newMessage){
              SOAPMessage msg = null;
              try {
                   MessageFactory msgFactory = MessageFactory.newInstance();
                   msg = msgFactory.createMessage();
                   // Create an envelope in the message
                   SOAPEnvelope envelope = msg.getSOAPPart().getEnvelope();
                   msg.setProperty(SOAPMessage.WRITE_XML_DECLARATION, "true");
                   msg.setProperty(SOAPMessage.CHARACTER_SET_ENCODING, "UTF-8");
                   //Get hold of the the body
                   SOAPBody body = envelope.getBody();
                   SOAPElement soap_message = body.addChildElement("MESSAGE");
                   if (newMessage.message_type != null){
                        SOAPElement soap_message_type = soap_message.addChildElement("MESSAGETYPE");
                        soap_message_type.addTextNode(newMessage.message_type);
                   if (newMessage.questionID != 0){
                        SOAPElement soap_questionID = soap_message.addChildElement("QUESTIONID");
                        soap_questionID.addTextNode("" + newMessage.questionID);
                   if (newMessage.username != null){
                        SOAPElement soap_username = soap_message.addChildElement("USERNAME");
                        soap_username.addTextNode(newMessage.username);
                   if (newMessage.password != null){
                        SOAPElement soap_password = soap_message.addChildElement("PASSWORD");
                        soap_password.addTextNode(newMessage.password);
                   if (newMessage.message_text != null){
                        AttachmentPart soap_message_text = msg.createAttachmentPart("<html><body>" + newMessage.message_text + "</body></html>", "text/html");
                        soap_message_text.setContentId("MESSAGETEXT");
                        msg.addAttachmentPart(soap_message_text);
                        //SOAPElement soap_message_text = soap_message.addChildElement("MESSAGETEXT");
                        //soap_message_text.addTextNode(newMessage.message_text);
                   if (newMessage.sampleString != null){
                        SOAPElement soap_password = soap_message.addChildElement("SAMPLESTRING");
                        soap_password.addTextNode(newMessage.sampleString);
                   SOAPElement tmpEl;
                   for (int i=0; i<newMessage.numArrayUsed; i++){
                        tmpEl = soap_message.addChildElement("SAMPLEINT");
                        tmpEl.addTextNode("" + newMessage.sampleInt);
                   msg.saveChanges();
              } catch (Exception e) {
                   e.printStackTrace();
              return msg;
    You can see in the area where it adds MESSAGETEXT there are two clients commented out which work. The three lines above it are what changed to make it an attachment instead.
    Code in Client for recieving reply from Servlet
    SOAPMessage reply = connection.call(soap_msg, endpoint);
    System.out.println("\nReceived reply from: " + endpoint);
    reply.writeTo(System.out);
    System.out.println("");
    reply_msg = ProcessXML.parse(reply);This is the console output:
    Edit: These forums seem to be inserting an extra > before the <?xml version="1.0" encoding="UTF-8"?> line, but it doesn't exist in the code I'm pasting
    Received reply from: http://localhost:8080/kuj/CaseStudyServlet
    ------=_Part_2_371807.1137465625031
    Content-Type: text/xml; charset=UTF-8
    <?xml version="1.0" encoding="UTF-8"?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"><SOAP-ENV:Header/><SOAP-ENV:Body><MESSAGE><MESSAGETYPE>deliverquestion</MESSAGETYPE><QUESTIONID>1</QUESTIONID><USERNAME>zac</USERNAME></MESSAGE></SOAP-ENV:Body></SOAP-ENV:Envelope>
    ------=_Part_2_371807.1137465625031
    Content-Type: text/html
    Content-Id: MESSAGETEXT
    <html><body>This is an Array sort Question. You will be given 10 random integers and you must sort and return them in the order of greatest to least.</body></html>
    ------=_Part_2_371807.1137465625031--
    ERROR:  'Content is not allowed in prolog.'
    17-Jan-2006 02:40:25 com.sun.xml.messaging.saaj.soap.EnvelopeFactory createEnvelope
    SEVERE: SAAJ0511: Unable to create envelope from given source
    com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to create envelope from given source:
         at com.sun.xml.messaging.saaj.soap.EnvelopeFactory.createEnvelope(EnvelopeFactory.java:111)
         at com.sun.xml.messaging.saaj.soap.ver1_1.SOAPPart1_1Impl.createEnvelopeFromSource(SOAPPart1_1Impl.java:39)
         at com.sun.xml.messaging.saaj.soap.SOAPPartImpl.getEnvelope(SOAPPartImpl.java:98)
         at com.zacwittedesign.xml.ProcessXML.realParse(ProcessXML.java:32)
         at com.zacwittedesign.xml.ProcessXML.parse(ProcessXML.java:26)
    (snip)And this is the beginning of the code for extracting the info from the SOAPMessage on the Client side:
    private static Message realParse(SOAPMessage msg){
              Message newMessage = new Message();
              try {
                   SOAPEnvelope envelope = msg.getSOAPPart().getEnvelope();
                   SOAPBody body = envelope.getBody();
    (snip)It dies on SOAPEnvelope envelope = msg.getSOAPPart().getEnvelope();
    Does anyone know what I'm doing wrong?

    I suppose I should also include the bit where the Servlet actually SENDs the resulting SOAPMessage
    SOAPMessage msg = ProcessXML.buildXML(outMessage);
    // try to send it
    try {
         response.setContentType("text/xml");
         msg.writeTo(response.getOutputStream());

  • The latest version of iTunes does not allow me to open a playlist in a separate window.  I need this feature.  Is there another way?  You used to be able to double click a playlist and have it appear in a new window.

    The latest version of iTunes does not allow me to open a playlist in a separate window.  I need this feature.  Is there another way?  You used to be able to double click a playlist and have it appear in a new window.

    Others have commented on this too.  It seems to be one of the 'improvements' of the newer version you are supposed to embrace with joy as an exciting new development.  You can send feedback to Apple but realize you may be perceived as standing in the path of  progress.
    http://www.apple.com/feedback/itunesapp.html

  • Security error - User is not allowed to execute Proces - Resolved

    Enabled security on my domain by editing message-handlers.xml :
    <inbound-flow>
    <!-- <message-handler id="default" />-->
    <message-handler id="security" />
    </inbound-flow>
    commented out <property id="SecuredProcesses" > .. </property> to apply security to all processes.
    Now when I initiate process through BPELConsole I tick the WS-Security and use bpeladmin/welcome1 as credentials (I'm logged into console as this), I get the following error. In fact I get the very same error if I make up a username/password.
    <2007-10-24 08:17:41,343> <ERROR> <archi2.collaxa.cube> <BaseCubeSessionBean::lo
    gError> Error while invoking bean "delivery": [com.collaxa.cube.engine.handlers.
    HandlerInvocationException: Error while invoking inbound message handler.
    An error has occurred while attempting to invoke the inbound message handler cla
    ss "class com.collaxa.cube.security.Authenticator" for the message "". The exce
    ption reported was: User is not allowed to execute Proces, User[true] process [f
    alse]
    ORABPEL-02175
    In bpel.xml of the process itself I have this:
    <?xml version = '1.0' encoding = 'UTF-8'?>
    <BPELSuitcase>
    <BPELProcess id="SQTest2" src="SQTest2.bpel">
    <partnerLinkBindings> ....snip...
    </partnerLinkBindings>
    <preferences>
    <property name="user" encryption="plaintext">bpeladmin</property>
    <property name="pw" encryption="plaintext">welcome1</property>
    </preferences>
    </BPELProcess>
    </BPELSuitcase>
    If I don't supply username/password then I get "Could not apply security [No username provided, security expects user]" which sounds right enough.
    I'm using the default authentication scheme system-jazn-data.xml and using 10.1.3.3 patchset on linux.

    My own fault, putting user credentials in wrong place in bpel.xml:
    <?xml version = '1.0' encoding = 'UTF-8'?>
    <BPELSuitcase>
    <BPELProcess id="SQTest2" src="SQTest2.bpel">
    <partnerLinkBindings> ....
    </partnerLinkBindings>
    <configurations>
    <property name="user" encryption="plaintext">bpeladmin</property>
    <property name="pw" encryption="plaintext">welcome1</property>
    </configurations>
    </BPELProcess>
    </BPELSuitcase>

  • The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. InnerException: Requested registry access is not allowed.

    I have read some of the other posts for people that got this error, but none seem to apply to me.
    My program has been working for weeks.  I made some minor changes, and started getting the error (full details below).
    I did a TFS "undo pending changes" and still getting the same error, even after logging off.  The one odd thing is that I did change my Windows password this week. The connection string is using a SQL user id and password that has no issues.
    I'm an Admin own my own box (running WIn XP SP3).  I even tried "Run as Admin" on Visual Studio.
    I'm doing a Debug-Start, running a Console-Test-Program that calls a WCF service, which on local machine is hosted by "ASP.NET Development Server".
    We have two other developers, one has the same problem, one does not.  In theory, we have all done "get latest" and are running the same code.
    The SQL Connection is related to a trace database; we are using this library http://ukadcdiagnostics.codeplex.com which has worked fine for months.
    When I do "Start Run" in Visual Studio, I get this error:
    {"The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. "}
    with InnerException: {"The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception."}
    and it has InnerException: {"Requested registry access is not allowed. "}
    Outmost StackTrace:
       at System.Data.SqlClient.SqlConnection..ctor()
       at System.Data.SqlClient.SqlConnection..ctor(String connectionString)
       at FRB.Diagnostics.Listeners.SqlDataAccessCommand..ctor(String connectionString, String commandText, CommandType commandType)
       at FRB.Diagnostics.Listeners.SqlDataAccessAdapter.CreateCommand()
       at FRB.Diagnostics.Listeners.SqlTraceListener.TraceEventCore(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String message)
       at FRB.Diagnostics.Listeners.CustomTraceListener.FilterTraceEventCore(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String message)
       at FRB.Diagnostics.Listeners.CustomTraceListener.TraceEvent(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String format, Object[] args)
       at System.Diagnostics.TraceSource.TraceEvent(TraceEventType eventType, Int32 id, String format, Object[] args)
       at System.Diagnostics.TraceSource.TraceInformation(String message)
       at FRB.EC.AdminService.AdminService.TestHelloWorldWithTrace(String name)
       at SyncInvokeTestHelloWorldWithTrace(Object , Object[] , Object[] )
       at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
       at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
    Second Inner StackTrace:
       at System.Data.SqlClient.SqlConnection..cctor()
    Third Inner StackTrace:
          at System.Data.SqlClient.SqlConnectionFactory..cctor()
    When I do "Run as Admin", I get this error:
    {"Could not load file or assembly 'FRB.EFDataAccess, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Access is denied. "}
    Server stack trace:
       at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
       at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
       at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at FRB.EC.AdminService.ConsoleTester.svcRef.IAdminService.GetDispositionStatusTypeList()
       at FRB.EC.AdminService.ConsoleTester.svcRef.AdminServiceClient.GetDispositionStatusTypeList() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\Service References\svcRef\Reference.cs:line 2459
       at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.GetDispositionStatusTypeList() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 565
       at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.ExecuteNewRelease103QueryMethods() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 189
       at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.Main(String[] args) in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 76
       at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args)
       at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)
       at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
       at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ThreadHelper.ThreadStart()
    I am also posting the web.config/app.config, but I would rather not focus on that since there were absolutely no changes to it between the time it was working and the time it began failing. 
    Client app.config
    <?xml version="1.0" encoding="utf-8" ?>
    <configuration>
      <connectionStrings>
      </connectionStrings>
      <system.serviceModel>
        <behaviors>
          <serviceBehaviors>
            <behavior name="ServiceBehavior">
              <serviceMetadata httpGetEnabled="true"/>
              <serviceDebug includeExceptionDetailInFaults="false"/>
              <serviceAuthorization impersonateCallerForAllOperations="true"/>
            </behavior>
          </serviceBehaviors>
          <endpointBehaviors>
            <behavior name="FRB.AllowImpersonate">
              <clientCredentials>
                <windows allowedImpersonationLevel="Impersonation"/>
              </clientCredentials>
            </behavior>
          </endpointBehaviors>
        </behaviors>
        <bindings>
          <wsHttpBinding>
            <binding name="WSHttpBinding_IAdminService" closeTimeout="00:01:00"
              openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"
              bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard"
              maxBufferPoolSize="524288" maxReceivedMessageSize="5565536"
              messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true"
              allowCookies="false">
              <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384"
                maxBytesPerRead="4096" maxNameTableCharCount="16384" />
              <reliableSession ordered="true" inactivityTimeout="00:10:00"
                enabled="false" />
              <security mode="Message">
                <transport clientCredentialType="Windows" proxyCredentialType="None"
                  realm="" />
                <message clientCredentialType="Windows" negotiateServiceCredential="true"
                  algorithmSuite="Default" />
              </security>
            </binding>
          </wsHttpBinding>
        </bindings>
            <client>
                  <endpoint address="http://localhost:3588/AdminService.svc" binding="wsHttpBinding"
                        bindingConfiguration="WSHttpBinding_IAdminService" contract="svcRef.IAdminService"
                        name="WSHttpBinding_IAdminService">
                        <identity>
                              <dns value="localhost" />
                        </identity>
                  </endpoint>
            </client>
        </system.serviceModel>
    </configuration>
    web.config of WCF service:
      <?xml version="1.0"?>
    <configuration>
        <configSections>
        <section name="FRB.Diagnostics" type="FRB.Diagnostics.Configuration.UkadcDiagnosticsSection, FRB.Diagnostics"/>
      </configSections>
        <appSettings>
           <!-- whatever goes here -->
        </appSettings>
        <!-- connection string section -->
      <connectionStrings>
        <add name="log" connectionString="Data Source=myserver;Initial Catalog=ECWCFLOG_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True" providerName="System.Data.SqlClient"/>
        <add name="DBConn" connectionString="Data Source=myserver;Initial Catalog=ECData_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True" providerName="System.Data.SqlClient"/>
        <add name="EagleConnectEntities" connectionString="metadata=res://*/EagleConnect.csdl|res://*/EagleConnect.ssdl|res://*/EagleConnect.msl;provider=System.Data.SqlClient;provider connection string=&quot;Data Source=myserver;Initial
    Catalog=ECData_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True&quot;" providerName="System.Data.EntityClient"/>
      </connectionStrings>
        <!-- FRB.Diagnostics logging section -->
        <FRB.Diagnostics>
            <sqlTraceListeners>
                <sqlTraceListener name="sqlTraceListenerSettings"
                            connectionStringName="log"
                            commandText="INSERT INTO LogStore VALUES(@Source, @ActivityId, @ProcessId, @ThreadId, @EventType, @Message, @Timestamp)"
                            commandType="Text">
                    <parameters>
                        <parameter name="@Source" propertyToken="{Source}"/>
                        <parameter name="@ActivityId" propertyToken="{ActivityId}"/>
                        <parameter name="@ProcessId" propertyToken="{ProcessId}"/>
                        <parameter name="@ThreadId" propertyToken="{ThreadId}"/>
                        <parameter name="@EventType" propertyToken="{EventType}" callToString="true"/>
                        <parameter name="@Message" propertyToken="{Message}"/>
                        <parameter name="@Timestamp" propertyToken="{DateTime}"/>
              <!-- <parameter name="@UserId" propertyToken="{WindowsIdentity}"/> -->
            </parameters>
                </sqlTraceListener>
            </sqlTraceListeners>
            <smtpTraceListeners>
                <smtpTraceListener name="smtpTraceListenerSettings"
                             host="vssmtp"
                             port="25"
                             from="[email protected]"
                             to="[email protected]"
                             subject="AdminService Logging Event: {EventType}, {MachineName}"
                             body="{Message}&#xA;=======&#xA;Process={ProcessId},&#xA;Thread={ThreadId},&#xA;ActivityId={ActivityId}"/>
            </smtpTraceListeners>
        </FRB.Diagnostics>
        <!-- System.Diagnostics logging section -->
        <system.diagnostics>
            <sources>
                <source name="FRB.EC.AdminService" switchValue="All">
                    <listeners>
                        <clear/>
                        <add name="ods"/>
                        <add name="smtp"/>
                        <add name="sql"/>
                    </listeners>
                </source>
                <source name="System.ServiceModel" switchValue="Off" propagateActivity="true">
                    <listeners>
                        <add name="ignored" type="System.Diagnostics.ConsoleTraceListener"/>
                    </listeners>
                </source>
            </sources>
            <sharedListeners>
                <!-- OutputDebugStringTraceListener -->
                <add name="ods"
               type="FRB.Diagnostics.Listeners.OutputDebugStringTraceListener, FRB.Diagnostics"
               initializeData="{ActivityId}|{EventType}: {Message} - {DateTime}, Process={ProcessId}, Thread={ThreadId}"/>
                <!-- SqlTraceListener -->
                <add name="sql"
               type="FRB.Diagnostics.Listeners.SqlTraceListener, FRB.Diagnostics"
               initializeData="sqlTraceListenerSettings"
               traceOutputOptions="Timestamp"/>
                <!-- SmtpTraceListener -->
                <add name="smtp"
               type="FRB.Diagnostics.Listeners.SmtpTraceListener, FRB.Diagnostics"
               initializeData="smtpTraceListenerSettings">
                       <filter type="System.Diagnostics.EventTypeFilter"
                       initializeData="Error"/>
                </add>
            </sharedListeners>
            <trace autoflush="true"/>
        </system.diagnostics>
        <system.web>
        <compilation debug="true" targetFramework="4.0">
        </compilation>
            <roleManager enabled="true" defaultProvider="AspNetWindowsTokenRoleProvider"/>
        </system.web>
        <system.serviceModel>
            <services>
                <service name="FRB.EC.AdminService.AdminService"
                   behaviorConfiguration="FRB.EC.AdminService.AdminServiceBehavior">
                    <!-- Service Endpoints -->
                    <endpoint address="" binding="wsHttpBinding"
                      bindingConfiguration="wsHttpEndpointBinding"
                      contract="FRB.EC.AdminService.IAdminService">
                        <!--
                  Upon deployment, the following identity element should be removed or replaced to reflect the
                  identity under which the deployed service runs. 
                  If removed, WCF will infer an appropriate identity automatically.
              -->
                        <identity>
                            <dns value="localhost"/>
                        </identity>
                    </endpoint>
                    <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/>
                </service>
            </services>
            <bindings>
                <wsHttpBinding>
                    <binding name="wsHttpEndpointBinding"
                     maxBufferPoolSize="2147483647"
                     maxReceivedMessageSize="500000000">
                        <readerQuotas maxDepth="2147483647"
                            maxStringContentLength="2147483647"
                            maxArrayLength="2147483647"
                            maxBytesPerRead="2147483647"
                            maxNameTableCharCount="2147483647"/>
                        <security>
                            <message clientCredentialType="Windows"/>
                        </security>
                    </binding>
                </wsHttpBinding>
            </bindings>
            <behaviors>
                <serviceBehaviors>
                    <behavior name="FRB.EC.AdminService.AdminServiceBehavior">
                        <!-- To avoid disclosing metadata information, set the value below to false and
                   remove the metadata endpoint above before deployment -->
                        <serviceMetadata httpGetEnabled="true"/>
                        <!-- To receive exception details in faults for debugging purposes, set the value below to true. 
                   Set to false before deployment to avoid disclosing exception information -->
                        <serviceDebug includeExceptionDetailInFaults="true"/>
                        <serviceCredentials>
                        </serviceCredentials>
                        <!--<serviceAuthorization principalPermissionMode="UseAspNetRoles"
                    roleProviderName="AspNetWindowsTokenRoleProvider"/>-->
                        <serviceAuthorization principalPermissionMode="UseWindowsGroups"
                                    impersonateCallerForAllOperations="true"/>
                    </behavior>
                    <behavior name="FRB.EC.AdminService.IAdminServiceTransportBehavior">
                        <!-- To avoid disclosing metadata information, set the value below to false and
                   remove the metadata endpoint above before deployment -->
                        <serviceMetadata httpGetEnabled="true"/>
                        <!-- To receive exception details in faults for debugging purposes, set the value below to true. 
                   Set to false before deployment to avoid disclosing exception information -->
                        <serviceDebug includeExceptionDetailInFaults="false"/>
                        <serviceCredentials>
                            <clientCertificate>
                                <authentication certificateValidationMode="PeerTrust"/>
                                <!--<authentication certificateValidationMode="Custom" customCertificateValidatorType="DataFactionServices.FRBX509CertificateValidator"/>-->
                            </clientCertificate>
                            <serviceCertificate findValue="WCfServer"
                                    storeLocation="LocalMachine"
                                    storeName="My" x509FindType="FindBySubjectName"/>
                        </serviceCredentials>
                    </behavior>
                </serviceBehaviors>
            </behaviors>
            <serviceHostingEnvironment multipleSiteBindingsEnabled="true"/>
        </system.serviceModel>
        <system.webServer>
            <modules runAllManagedModulesForAllRequests="true"/>
        </system.webServer>
    </configuration>
    Thanks for any help.
    Neal

    I think I found it... this is sure a strange error for what is really happening.
    Apparently it had happened to me before, and fortuantely, I actually added the following comment:
                // Above is related to the WCFLOG SQL Diagnostics Trace 
                // If you get error here an inner exception "requested registry access is not allowed"
                // inside exception "type initializer for System.Data.SqlClient.SqlConnection"
                // then make sure you have impersonation enabled in your client.
                // See AdminConsole web.config or FRB.EC.AdminService.ConsoleTester.app.config for examples
    Now I think I will do a try catch and spit out the same text.
    Still testing to assure that this really was the issue.
          <endpointBehaviors>
            <behavior name="FRB.AllowImpersonate ">
              <clientCredentials>
                <windows allowedImpersonationLevel="Impersonation"/>
              </clientCredentials>
            </behavior>
          </endpointBehaviors>
    The line below in BOLD below is what somehow seemed to disappear from my app.config - probably due to a TFS human error - still checking that also:
            <client>
                  <endpoint address="http://localhost:4998/AdminService.svc"
                                  behaviorConfiguration="FRB.AllowImpersonate"
                                  binding="wsHttpBinding"
                                  bindingConfiguration="WSHttpBinding_IAdminService"
                                 contract="svcRef.IAdminService"
                            name="WSHttpBinding_IAdminService">
                        <identity>
                              <dns value="localhost" />
                        </identity>
                  </endpoint>
            </client>
    Here's how I "idiot-proofed" this error for now, to give an error that actually at least points to a solution:
            public SqlDataAccessCommand(string connectionString, string commandText, CommandType commandType)
                try
                    _connection = new SqlConnection(connectionString);
                    // Above is related to the WCFLOG SQL Diagnostics Trace  
                    // If you get error here an inner exception "requested registry access is not allowed"
                    // inside exception "type initializer for System.Data.SqlClient.SqlConnection"
                    // then make sure you have impersonation enabled in your client.
                    // See AdminConsole web.config or FRB.EC.AdminService.ConsoleTester.app.config for examples
                catch (Exception ex)
                    if (ex.ToString().Contains("The type initializer for"))
                    throw new System.ApplicationException(@"
                    Your client app <endpoint> must be cofigured have a
                  'behaviorConfiguration' attribute like this:
                    behaviorConfiguration='FRB.AllowImpersonate'
                   that points back to a behavior that has this syntax:         
              <behavior name='FRB.AllowImpersonate'>
                 <clientCredentials>
                     <windows allowedImpersonationLevel='Impersonation'/>
                 </clientCredentials>
              </behavior>
              ", ex);
                   else
                        throw ex;
                _command = _connection.CreateCommand();
                _command.CommandText = commandText;
                _command.CommandType = commandType;
                // TODO _command.CommandTimeout = ;
    Neal

  • I got a new computer and backed up my iTunes library to an external hard drive.  The external hard drive is not allowing me to access the drive.  Is there a way to transfer the songs from my iPod touch to my new computer?

    I got a new computer and backed up my iTunes library to an external hard drive.  The external hard drive is not allowing me to access the drive.  I no longer have access to the old computer.  Is there a way to transfer the songs from my iPod touch to my new computer?

    That's a bummer, didn't realize the exHD files were corrupt, esp if you have tried from another PC and not just this new computer.
    You can get purchases from the itunes store transferred from an iPod using these directions:
    http://support.apple.com/kb/HT1848?viewlocale=en_US
    If you want everything (meaning non-itunes songs, app data, photos, etc) you need to buy a 3rd-party ipod manager that support iTouch. Here is an iLounge article to start your research:
    http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/P2/

  • HT3275 Time machine at home and it will not allow me to remove the listing of my external hard drive from the excluded files list.

    Please help guys, I have a Time machine at home and it will not allow me to remove the listing of my external hard drive from the excluded files list.
    I am trying to use time machine to back up the hard drive. For backing up from Macbooik pro and Imac, there is no problem. It seems to not want to allow the external drive to be removed from the Excluded list and as such will not back up from it.
    Is there a way to be able to transfer files (music, movies etc) to time machine, format the external drive then put the files back to hard drive?
    Sorry it is a long winded question but it is driving me nuts that I cant sort this out.
    The <Macbook and Imac are both running mountain lion.
    Thanks Guys

    As for the hard drive to which you have never been able to write, is it by any chance in NTFS format? OS X can read NTFS for importing files, but it does not contain code for writing on an NTFS volume. That's a choice, not a bug.
    There is third-party software available to install NTFS-writing capability into OS X. An example is Paragon NTFS for Mac OS X. Another alternative would be to use a disk format that both Macs and Windows systems can use for both reading and writing; this would require either a new drive or erase the existing data.
    If by "the new system software" you mean OS X 10.9 Mavericks, you may want to repost that portion of your query in the Mavericks forum at https://discussions.apple.com/community/mac_os/os_x_mavericks . I haven't made the leap yet.
    I don't know what other problems you have been having, so I cannot comment on them. You don't seem to have any other recent postings on these forums.

Maybe you are looking for