Comments for FCP users

While I'm in need to upgrade my little ibook (rendering takes forever) I wanted to get the opinions of people who use Adobe/ QT Pro/ and mainly FCP users who routinely use this machine for work.
Obviously, the one I'm interested in is the full blown 2.1 Ghz maxed out to the 2.5 Ram.
So if anyone already has this config and wants to tell the world how good/ not-so-good it is for rendering and major aps. please let me know all about it.

What a fantastic ANSWER.
Great reply. Can't wait to post soon.

Similar Messages

Free MPEG2 Playback Component download link for FCP users is broken?

http://www.apple.com/quicktime/mpeg2/update/
quote:
Final Cut Pro and DVD Studio Pro and Final Cut Studio Users
If you received your MPEG-2 Playback Component as part of Final Cut Pro or DVD Studio Pro or Final Cut Studio, you can download the update with your Final Cut Pro or DVD Studio Pro or Final Cut Studio serial number. Download Update.
I'm trying to download the update to MPEG2 Playback component via the URL that is listed at the address above ( http://www.apple.com/quicktime/mpeg2/download )
The links seems to be broken. I have received my Playback Component as a part of Final Cut Pro. Any suggestions on how to obtain the update?
ibook g4 Mac OS X (10.4.8)

Well if the link stay broken ...call them...Nothing
you can from here...sorry
Well, I actually e-mailed Apple Store support (since that's where I originally ordered the FCP crossgrade). They suggested that I post my question over here.
I don't feel comfortable about making a support call to USA from Finland... they might put me on hold for ages and it would end up costing a lot more than purchasing the component from Apple Store.
I think that the link has been broken for months already, although I'm not sure. Doesn't Apple have any kind of e-mail address to ask about this issue?
ibook g4 Mac OS X (10.4.8)

Beginning Questions for FCP user

Hi - I'm new to FCP (have used Premiere and Avid in past) and I have several questions. I have an Aja Kona 3 system with breakout box and want to know if it's possible to view HD footage captured on a Sony HD EX1 on my NTSC monitor? What should my Audio/Video setting be? I have 2 30"Apple HD cinema monitors and a Sony NTSC monitor.
Also - Do I always want to edit in the native format that I shot footage in when it comes to HD? This is my first time working w/HD, so I'm a bit confused, as I have a project that requires me to mix HD and SD footage, but I'm used to watching SD footage on an external NTSC monitor in real time.
Also - when worked with 24p SD footage in the past, I always had to do a 3:2 pulldown in After Effects - is this not necessary to do with HD footage now to manipulate it?
What does anyone recommend for my sequence timeline settings in general then? thanks -

Yes, the Kona3 can down convert HD to NTSC, those settings are controlled with the AJA control panel.
Your video settings (typically) should match the settings of (the majority of) your captured footage settings.
With the possible exception of HDV (in combination with the power of your computer) yes, you should typically edit in the native format of your footage when possible.
If your using a mix of HD and SD you'd base your settings on the desired end product, HD or SD.
You can not mix frame rates within a sequence. If you shot 24p set your sequence to 24p.
Sequence settings, in general, should match your captured footage native settings.

Speech recognition or other solution for FCP user with hand injuries?

Hi,
I work with final cut pro on a daily basis and have repetitive stress injuries on my hands/wrists from years of keyboard and mouse use. I was wondering if there is any way to use hands-free speech recognition software with a graphical program like fcp? Any other suggestions would be most welcome as well...
Thanks.

. I was wondering if
there is any way to use hands-free speech recognition
software with a graphical program like fcp?
Don't know about hands-free speech recognition, but I have a wacom tablet and pen that I love. Some people hate the pen but I love it. I allows free movement throughout the program with little effort of movement. It's also great for photoshop and After Effects when you're doing drawing type functions.
I'm assuming that you've seen a doctor and that you hand is being treated for injury. Correct?
Just a thought. My husband had carpal tunnel sydrome for months when a nasty hand injury forced surgery and they fixed the carpal tunnel while they were in there. Guys....

How Hard for FCP User

For the last 10 years I've been using Final Cut Pro as my NLE, but with the release of CS5 I'm seriously looking into moving to it. My question is a simple one: how difficult will it be to move from FCP to Premiere CS5? I figure there will be a small learning curve with a different workflow and names and everything, but how quickly do you think I'll be able to pick it up?

Easy peasy.

Spotlight Comments for All Users

Hello.
I have been trying to allow users to add spolight comments to files on a server. It seems that only the owner of a file can add spolight comments, which is of no use to us whatsoever. Is there any way of allowing all users to add spotlight comments to files on a server, without having to make everyone access the share as "admin"?
Thanks,
Tom

I fixed this problem in the end, but the solution is not ideal. I set up a new user, and added short names reflecting the names of the users, so as far as they are concerned, they are still logging in as themselves.
I did wonder if any user with their "primary group" set to the access group in the POSIX settings would be allowed to add file comments, but I try it in the end, though it might work.

Enable commenting for Reader users

This question was posted in response to the following article: http://help.adobe.com/en_US/acrobat/pro/using/WS8F17CB6D-B39D-4cf6-8060-7907C1AC53F7.w.htm l

When trying to share a Reader extended PDF, I get this dialog box: "The document you have chose cannot be sent for shared review or collaboration
because its current security permissions do not allow modifications. Please choose another document or change this document to allow modifications."
Does this meant that Reader extended PDFs are only sharable as email attachments and cannot be shared via Acrobat.com? If so, how do I get around
this? My department has Acrobat X, but most of the organization uses Reader X. We frequently need to share PDFs for review.

Suggested user rights for FCP daily work

friends,
I am wondering what is the suggested user rights for a user doing daily work with final cut pro?
Should this user be an admin or restricted?
What is the suggested - best practice?
I am wondering what the benefits - drawbacks are of iether means.
What do you do?
Thnaks

If you're the only user, you need to have admin privileges...
If you're not the only user, and you don't trust the other users, then just give one person admin privileges... That said, I know of several bays here in Denver which are used extensively by many users and they all share the same user account without a problem... just sort of depends on how much you trust all those different folks.
FCP runs fine either way, but only admin's can install updates or other applications. In some cases you can even set up systems that won't allow users to even use utilities... I think this is likely taking things a bit far, but it's certainly not unknown to do this. (keeps them from reformatting drives for example).
But in and of itself, FCS runs OK with or without admin privileges.
Jerry

How can I make comments Editable for the users?

Good day,
How to give edit rights for the user to edit his comment?
If anyone can point me to a tutorial on how to do this or even give me a few tips, would be greatly appreciated!.
Thanks

I think we need a bit more information. Most importantly:
#1 Edit comments where?
#2 What technologies are you using? (PHP, Cold Fusion, etc)
#3 A link to actual site would be most helpful
Brad

Sharepoint Foundation - search working for some users (or computers), but not others

Hi all,
We have doozy of a search problem with SharePoint Foundation 2010 that I'm hoping someone can help with.
We have an application that is listening on port 14197 and search is working just fine, but only for one or two users.
If I do a search while logged in using the account we set the application up with then the search works fine and it returns records as expected.
If I use a different account - one that has full control over the app, then the exact same search fails with the following message:
We did not find any results for 06BSL.
Suggestions:
Ensure words are spelled correctly.
Try using synonyms or related searches.
Try broadening your search by searching from a different site.
Additional resources:
Get additional search tips by visiting Search Help
If you cannot find a page that you know exists, contact your administrator.
We've done everything we can think of, including several procedures to create new search accounts, replace databases, etc.
Nothing has helped and all of the info we can find online is in relation to getting search working when it doesn't work at all. In our case it is working, but only for some users. We thought it might have been a permissions issue, but not matter
what permissions we seem to give to test accounts they still don't work. We've set up a test account, for example, that is a member of the 'application owners' group, but cannot produce any search results with it.
The SharePoint Foundation server is running on Windows 2008 Server Foundation, with a separate SBS 2003 DC.
Any help most appreciated.

Hi Alex, thanks for your response and apologies about the late reply - didn't realise someone had responded until now!
Agreed that this looks like a permissions issue, but we're stumped as to what it could be. The 'test' account displays this problem - if we try and search on 06BSL
we get no results, but it does appear that this account has full control over this document (see below).
Note that the 'Manage Permissions' page presents a comment 'This list item inherits permissions from its parent. (Customer QA & Product Management)' which is what we're
expecting.
The indexing schedule is set to 5 minutes.
Appreciate your help with this, as we've spent a huge amount of time on this problem but don't seem to be any closer to a resolution.
Cheers,
Damian
Check permissions result (this result is the same for the list or for the document itself):
Permission levels given to test (DOMAIN\test)
Full Control
Given through the "QA Application Owners" group.
Design, Contribute, Read
Given through the "QA Application Members" group.

RH10 - Search not producing results for some users

I am using RH10 and the help system is stored on a sharepoint server (it was output as WebHelp)
All users are able to access the system once we give them access, but when they go to search for topics, some get results and some don't. I believe it's related to java, but I can't find any documentation on what version of java is required for end users?
I have already uninstalled and reinstalled RH (as read in some of the forums) with no changes for the end users.
Are their other outputs that don't require java for searching?
Anything else I can test?
Other information that would be helpful to share?
Thanks!
Laura
(Moved this from the wrong forum -- sorry :-) )

We installed the patch and did a fresh upload and still have the same problems.
I was finally able to get the error information, but it doesn't seem to help me with troubleshooting. Any other suggestions are certainly welcome.
'Node' is undefined
whfhost.js
Line:3243
(it says this a few times and then it adds char:2)
That line of code is
function _getWordMatchType( a_Word, a_Tile, a_nPosition, a_nOffset )
The "waiting on" referred to in the next comment is the whfbody.thm file
The error was moving so quickly in the bottom left corner that I wasn't able to capture it in full, but it was "waiting on wh... <something>" -- I couldn't ever see what the entire name of the file it was waiting on was. I have limited time with the end users and have not been able to recreate in my environment unfortunately (even though I am using a similar set up as some).
If I search either the whfbody or whfhost in the message board archives, I come up with several instances where people have had similar issues, but there do not appear to be any fixes.
I am able to search whether I have enabled mode checked or unchecked, so I am not sure that works for us either.
Any other suggestions?
Thanks,
Laura

Can I use FCX for multiple users on the same machine?

I have one mac pro, and two video cmpanies. I have two users on my machine and would like to set up two different final cut x workplatforms. Is that possible?

Of course, you can use FCP X from two different user accounts on your machine. The question here, I believe, is how to separate the content that each user accesses.
One obvious way to achieve that would be to store the content in the system disk - that would put events and projects in each user's Movies folder. But that is a bad option, for performance reasons, and more.
You could have separate external disks for each user to store his content.
Also, you could use different disk images which could, say, be all stored in the same internal (but not system) drive.

Import PST files for multiple users at the same time?

While importing PST files into archive mailboxes, the Exchange 2010 mailbox server went to 100% CPU and memory usage and I could not stop the imports because the EMS stopped responding. We had to restart the whole server to get back to normal.
Not sure if importing PSTs was the cause of it it was a coincidence. We have done imports the same way before without this issue.
How many PST imports can be done at the same time and how do we queue up multiple users and have the mailbox imports have unique names for each user? I noticed they are always called MailboxImport and MailboxImport1 and then it starts over as MailboxImport
again for additional users. So, if more than one user's PSTs are being imported at the same time, we will have multiple identically named imports running.
We would like multiple users' PST imports to queue up and start automatically when the previous users' imports complete.

Please try like this. Rename folder name same as alias. i.e. \\server\share\<alias>. below are examples.
"\\server\share\jsmith"
"\\server\share\tjones"
"\\server\share\rsmith"
"\\server\share\bspears"
"\\server\share\mmouse"
And run below command to take PST from the corresponding
foreach ($i in (Get-Mailbox)) { New-MailboxImportRequest -Mailbox $i -FilePath "\\Server\share\$($i.Alias)\$($i.Alias).pst" -baditemlimit 50 -acceptlargedataloss ;while ((Get-MailboxImportRequest -mailbox $i | ? {$_.Status -eq "Queued" -or $_.Status -eq "InProgress"})) { sleep 180 } }
If a folder missing with the alias you will see an error similar to this.I think this will work for you. You just keep only the required PST folders to import in the "\\Server\share" folder.
"Unable to open PST file '\\server\share\mmouse\mmouse.pst'.
Error details: Could
not find a part of the path '\\server\share\mmouse\mmouse.pst'.
+ CategoryInfo : NotSpecified: (0:Int32) [New-MailboxImportRequest], RemotePermanentException
+ FullyQualifiedErrorId : 27802833,Microsoft.Exchange.Management.RecipientTasks.NewMailboxImportRequest"
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

How do I add a network printer to a terminal server for one user?

I have a 2003 terminal server. I also have a network printer accessible by IP. I want one of the users on the TS to print to this printer.
If I log in as the user, all print options are greyed (access denied). There's no 'users' icon in control panel to give the user admin access like I might do on a workstation. This printer is not installed on a print server so even if he did
have access, doing so doesn't appear to be an option. If I log in as Administrator I can add printers but it wants me to specify \\servername\printername and it's not set up that way. It's just a network printer on an IP. Also I'm not trying
to get RDP to map the printer locally for the user, he needs to be able to print from the terminal server to the network printer. Any articles I can find assume the printer is either local to the user or on a print server of some kind.
Is this possible and how?
Thanks!

Hi,
In addition to TP’s comment, you can go through beneath article for information.
Terminal Server and Printer Redirection
http://blogs.technet.com/b/askperf/archive/2007/08/24/terminal-server-and-printer-redirection.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Set ip address same for all users

I'm having trouble with my internet connection. I would love to know how to diagnose the problem but I fear there is no easy wasy to do that.
I can connect to my router without a problem, when I bring myiMac out of sleep I can connect to the internet without problem then that connection is lost for a few minutes and then things are ok. How do I diagnose this?
One option that has been suggested to me is to set my IP address in my network preferences. If I do this, can I apply that change across the four user accounts on my machine or do I need to go into each account and change it there? Would i be worth trying different IP addresses for each user?
I am wondering if having multiple accounts on my iMac is the source of my problems.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple |Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri|sshd?_c)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' ' {/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' ' -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist ' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` " /e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf,ssh{,d}_c*} {,/usr/local}/etc/periodic/*/* .launchd.conf " list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Comments for FCP users

Similar Messages

Maybe you are looking for