Comments in DNS/DHCP Java console not editable after SP2
Upgraded to OES11 SP2 (on SLES11 SP3) and now when using the DNS/DHCP Java console (Win 64) we get the following error when attempting to edit or create a comment for a host: "This functionality is not supported in this version of OES DHCP Server"
Is it correct that we can not use the comments field any more? no note of that as a change in the docs...
Thanks for any assistance.
Colin.
Originally Posted by chill
Upgraded to OES11 SP2 (on SLES11 SP3) and now when using the DNS/DHCP Java console (Win 64) we get the following error when attempting to edit or create a comment for a host: "This functionality is not supported in this version of OES DHCP Server"
I'm experiencing the exact same problem, but have to add: I think it's not just the comment field. Applying any changes after creating a record throws this error.
Similar Messages
-
DNS/DHCP Managment Console- IP Addresses not releasing
Hello,
I have added a new subnet on our network so we can add more wireless devices (iPads, Cellphones, etc. are all now needing IP addresses)
Everything is working fine except that the addresses are not releasing after 3 days. If someone with a Laptop comes into our building with a cell phone or laptop they are picking up an IP address automatically. Then once they leave (and the 3 day lease time expires) DNS/DHCP is not making that address available for another device.
Now we are quickly running out of local IP addresses on this new subnet. How can I get DNS/DHCP management console to hand out previously used expired IP addresses to new devices?
Thanks in advance!Originally Posted by Marcel_Cox
Have you actually run out of IP addresses? I have not checked the behavior of the DHCP server too closely, but it is well possible that it will hand out unused addresses before reusing expired ones, but that doesn't mean it will really run out of addresses.
Hello,
No we haven't run out yet so that my very well be the case.
We do have two subnets in the same building .30 subnet and .32 subnet
They both work, and any client can pickup an IP on either subnet.
The .30 subnet was the old one and the .32 subnet has just been created. Now all new clients pickup an address on the .32 subnet.
Is there any way to figure out why all the clients want to pull a .32 address now?
Thanks -
DNS/DHCP Management Console doesn't start
Folks,
I am running the DNS/DHCP Management Console in an old Windows XP Pro SP2 computer, and it works fine. But when I install it in my XP Pro SP3 computer it refuses to start. It stucks at the welcome screen with the globe animation and doesn't go any further. And there is also no apparent program or process to kill in the Task Manager, and the CPU util is zero. I have to log out and back in again to get rid of the welcome screen.
I am wondering if it may have something to do with the Java Runtime Environment (JRE)? I am using the latest version in my SP3 machine, where it doesn't work, and a much older version in my SP2 machine, where it works. I have not upgraded Java in that machine because I am afraid that the Management Console might stop working... If Java is the source of the problem, is it impossible to get it to work with a newer Java?
PJI wrote a TID on this, but it hasn't shown up yet. It is TID 7016049
As I am still waiting for it to show up on the public site, I will populate the resolution portion of the TID here. Hope it helps:
Despite uninstalling all older versions of Java, a remnant of the old install still exists. The offending file is javaw.exe, but there may also be a java.exe in the same location.
In the C:\Windows\SysWOW64 directory there may be a javaw.exe and java.exe from a previous installation. Check the properties > details tab of the file to confirm the version. If this javaw.exe is found first then Windows is directed to look in the wrong location in the registry for the Java Runtime Environment key. Once removed the javaw.exe from C:\Program Files\Java\JRE1.8.0_25\bin directory is found, which sends Windows down the correct path to find the necessary key in the registry.
Once the older version of javaw.exe is removed, the JMC should load.
The SysWOW64 directory is for 64-bit machines. If this error is being encountered on a 32 bit machine, then the superfluous javaw.exe must be found and removed. Process Monitor for Windows can be downloaded and utilized to track down the superfluous javaw.exe. As the java.exe is also superfluous, we recommend removing it to (or copy it out to a backup directory until testing is complete). -
Viewing Dynamic Leases Under The DNS/DHCP Management Console
My dhcp-server is on oes2 sp3 / sles 10 sp3 and i am trying to set it up for viewing dynamic leases in the DNS/DHCP Management Console.
I am following TID 7006450 and right away i get stuck.
From the TID
1. Launch the DNS/DHCP management console and login to the server
2. Click on the 'DHCP (OES Linux) tab toward the top of the console
3. Find the DHCP Server object at the bottom of the console and select it
4. Toward the top-right hand side of the console select the GENERAL tab and find the section called DHCP SERVER
---- There is no section called DHCP SERVER only Services
5. Click the ADD button and enter the IP address of the DHCP server
NOTE: If doing this step on OES 2 SP 2 the buttons may be greyed out. This is due to the schema not being extended. This option is officially supported on OES 2 SP 3
---- There is no ADD button
6. Click on the SAVE button toward the top, left-hand side of the console (looks like a floppy disk)
---- There is no SAVE button
I have downloaded the latest DNS/DHCP Management Console Version OES2 SP2 october 2009
Is ther a newer version to download-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Any error on the failed start that could help troubleshoot it? A coworker
confirmed the TID worked for him so that's a little comforting, though of
course no idea how your two systems differ. A Service Request (SR) with
Novell is always an option to work on this but it'd be useful to know what
your system showed when it wouldn't start dhcpd.
Good luck.
On 01/31/2011 01:06 PM, RPummel wrote:
>
> That is great advice about making sure to get the software from your
> OES2SP3 box.
>
> Being able to view dynamic leases has been a MAJOR feature I have been
> looking for. We have a bunch of NetWare servers still and are just
> starting to install OES2 Linux boxes, and I have had no visibility via
> the console into the leases hosted by our new Linux boxes.
>
> So, I just installed the console and followed the instructions in TID
> 7006450. However, something must be wrong. Not only does it still refuse
> to show me the dynamically assigned addresses, but if I stop the dhcpd
> service on the server and attempt to start it again, it FAILS! After a
> short panic, I deleted the TSIG Key object which the TID directed me to
> create. This allowed me to successfully start the dhcpd service. (Whew!)
> But, of course, I still can't see the dynamic addresses. I went through
> the directions again and got the same results.
>
> In case you are wondering, I made sure to set the secret for the TSIG
> Key to something divisible by 4, as instructed. I am at a loss. Ideas?
>
> Rick P
>
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.15 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iQIcBAEBAgAGBQJNRxqsAAoJEF+XTK08PnB5m4gP/2XmWBPd2fCbuahlRMik5fbN
37pYvKFrLsHLlUQMnDJc6Oh6AHxJ2yKmDz3Tr/n7MjKYWKX/oc4JcJK2zZ45wqUS
cuJi+ffwbXOOfPYj0zL4k9oTxm6YDYUZFtnsf8+idqm3BUd3k+ t3QzFjcmlGHBJY
l28V0kr0NvwQlyu8csPix+j5lwVEed33WE3AYP5myKPBxmPyAN Q4qHhyfHFNIKyH
9EAFG+ySpvAx1Q8+6m8XuQC5GUS7StO+hOytWh1SAIvqyx1Lfg loq5FdJxzQxidK
q8AA2TB3866gykMSXxIg07l9wZIDrVPSYeJrZfmBjLuac+ZRsa pIGl+K34HKxyqx
EAQ+frV95aOpfcPMFV5C7C+WttkiDHPZWGtKBPxdcx17W0S69N uhxDoswwiNZ/5g
hWqPatuW7HK5Adp6nUdsSwJKYWTr/a/ZCTFL/9zRBImafGygiD6Yt3oyD/BotiQM
Wy5WW4uayW7Wbfn9R5BmMi+sUDGfNS2k79BcM0uMTmoA3UZX3j UP04P7/dp6kANh
zKnHBGg6WSORi7/xYDvB9VX/Xm2nrBoyl0mA0hdnm+PmMtvm01BQ1tiAWfOQF8iw
7KRABNvH5lxvhVITsE7d9yuyAuMuFc8N+bZW5W09C+bqWGMn8M 5xudLNFZ4N6nb+
kVciE7BUkpeNvjOFNjBx
=lA0E
-----END PGP SIGNATURE----- -
Java console not displaying off internet explorer view tool bar
Hello,
I'm curious why my java console is not displaying when i click on it?
Internet Explorer: View: Java Console
and it doesn't work
does anyone know why this maybe?
Thank you...Basically,
just to add to it...
I am trying to access a website that has a NETLET from Sun Microsystems display
when accessing the website. When i do that from my computer...the NETLET does not
display...The NETLET runs on Jvm..virtual machine...I wondering if anyone knows why this isn't working...This relates to the Java console not working off of Internet Explorer..they seem to be correlated..Thank you -
I have "Show console" enabled in my Java Preferences Panel and the latest version of Java from Oracle installed. Running Mavericks 10.9.3. For some reason my Java console is not showing up?
Basically,
just to add to it...
I am trying to access a website that has a NETLET from Sun Microsystems display
when accessing the website. When i do that from my computer...the NETLET does not
display...The NETLET runs on Jvm..virtual machine...I wondering if anyone knows why this isn't working...This relates to the Java console not working off of Internet Explorer..they seem to be correlated..Thank you -
Po should not editable after grn
Dear All
My clint wants po should not editable after grn.
pls helpHi,
you can use user exit : EXIT_SAPMM06E_016
Following Logic can be use:
1. Validate the company code (BUKRS ) & Purchasing document type (BSART = F) from EKKO table for the Purchase order number (EBELN).
2. Check the entries for the Purchase order and the item number in the Purchase order history table ( EKBE) and also Validate if there is no reversal document for goods receipt ..
3. If we find GR doc in EKBE table with out reversal documents then display the warning or error message as POP - UP by using functional module POPUP_TO_CONFIRM.
Step 1: Validate Company code and Purchasing Document type from EKKO table
Step 2: Check the Purchasing document history from EKBE table
Step 3: Check whether any reversal made for goods receipt.
Step 4: Display popup message to user:
Use the function module u201CPOPUP_TO_CONFIRMu201D to display the below message u201CThe PO has been already Receipted. Before changing PO please take care about GR document reversalu201D.
Regards,
Vikas -
XP OS, have NoScript installed, disabled, Java console still will not load from FFx.
I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards -
java applets will not load,
i have run the java test page & i have the latest version installed.
have removed all old versions of java from my hard drive & restarted the computer.
i have checked that java is enabled in the plug-ins and it is with version se 6 u22, also something called java development toolkit 6.0.220.4 np runtime script plug-in library for java (tm) deploy.
if i click on java console in tolls nothing happensHi,
You might want to look in your control panel for 'Java' icon. It should give you an option to enable java plugin into your browser. Let me know if you still face the issue.
Thanks! -
Internet Explorer: Java Console Not showing
Hello,
I'm curious why my java console is not displaying when i click on it?
Internet Explorer: View: Java Console
and it doesn't work
does anyone know why this maybe?
Thank you...IE is a plague on mankind -- use Mozilla.
-
Java console not compatible with 6.01 Mozilla update
Since the 6.01 Firefox update, I can no longer view flash panels and some images are not appearing on web sites. I look and found all the java consoles greyed out with the message they were incompatible with 6.01 Firefox. So what do I do now? I also notice that websites suddenly disappear when I did not close them. Please fix this problem.
Hi catnip009:
I can confirm cor-el's information that it is "normal" for the Java Console extension to be disabled in FF6 (see my post [https://support.mozilla.com/en-US/questions/870013#answer-247544 here] for instructions on how to test your Java installation).
When you say "flash panels", do you mean that '''Adobe Flash''' doesn't seem to be working on some web sites with FF6?
If that's the case, then try the following:
First, check your Flash installation [http://www.adobe.com/software/flash/about/ here] on the Adobe web site. If your Flash isn't working or you don't have the latest Flash v. 10.3.183.7, do the following:
# Uninstall Adobe Flash from the Windows Control Panel
# Download and run the [http://kb2.adobe.com/cps/141/tn_14157.html Adobe Flash Uninstall Utility] to clean out remnants of any old installation
# Re-boot your PC
# Run the Adobe Flash Uninstall Utility again for safe measure
# Download the Adobe Flash v. 10.3.183.7 standalone plugin installer (the non-IE NPAPI version) from the FileHippo site [http://www.filehippo.com/download_flashplayer_firefox/10462/ here] . Be sure to download v. 10.3.183.7 (the current stable version) and not a beta test version. '''Save the installation file to your hard drive and do not run the installation from your browser'''
# Install Adobe Flash from the Run command (Start | Run) with the new installation file with all browsers and instant messenger software closed
# Check your new Flash installation [http://www.adobe.com/software/flash/about/ here].
If you also use the IE browser, the ActiveX version of Flash v. 10.3.183.7 for IE can be downloaded from FileHippo [http://www.filehippo.com/download_flashplayer_ie/10461/ here]. If you prefer you can re-install Flash from the Adobe site ([http://get.adobe.com/flashplayer/ here] for auto-detection of OS and default browser; [http://get.adobe.com/flashplayer/otherversions/ here] for any version of Flash), but I prefer using the standalone installers from FileHippo because Flash occasionally doesn't install correctly when you run the installation from the Adobe site via your web browser.
Windows Vista Home Premium 32-bit SP2 * IE 9.0 * Firefox 6.0 * Java 7.0 * Adobe Flash 10.3.183.7 -
Hi I'm using fire fox 4.0. when I click on the Java console nothing happens
Java 6 U22 is installed. That is however and older version.
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
#Next Generation Java Plug-in 1.6.0_22 for Mozilla browsers
Update the [[Using the Java plugin with Firefox|Java]] plugin to the latest version.
*http://kb.mozillazine.org/Java
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
The Java Console extension is no longer supported and you can remove them.
See:
* http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
You can also disable the Java Quick Starter extension: Tools -> Add-ons -> Extensions
* Control Panel -> Java -> Advanced tab -> Miscellaneous -> Java Quick Starter (disable)
See:
* http://www.java.com/en/download/help/quickstarter.xml - What is Java Quick Starter (JQS)? What is the benefit of running JQS? - 6.0 -
AS Java applications not starting after patching from 2004s SPS10 to SPS11
Hi folks,
after patching our NetWeaver 2004s from SPS10 to SPS11 and the Kernel from 7.00.83.0 to 7.00.95.0, the applications on the AS Java do not start up automatically any more.
Under the following URLs, the same error is shown:
http://<fully qualified host name>:51000/
http://<fully qualified host name>:51000/nwa
http://<fully qualified host name>:51000/sap/monitoring/SystemInfo
http://<fully qualified host name>:51000/useradmin/
http://<fully qualified host name>:51000/wsnavigator
http://<fully qualified host name>:51000/uddiclient
503 Service Unavailable
SAP J2EE Engine/7.00
Application stopped.
Details: You have requested an application that is currently stopped
http://<fully qualified host name>:51000/webdynpro/welcome/Welcome.jsp
itself works, the two links Content Administrator and Web Dynpro Console both lead to the same 503 error described above
On http://<fully qualified host name>:51000/irj, the error message is different:
com.sap.engine.services.deploy.container.ApplicationInManualStartUpException:
Application sap.com/com.sap.portal.fpn.accessservice cannot be started because is in MANUAL start-up mode..
Exception id: 09:33_09/05/07_0003_102709250
See the details for the exception ID in the log file
In std_server0.out we have the following entries, right after the list of all services that were started:
ServiceManager started for 39904 ms.
Framework started for 46720 ms.
SAP J2EE Engine Version 7.00 PatchLevel is running!
PatchLevel January 31, 2007 18:37 GMT
May 9, 2007 9:40:19 AM com.sap.portal.prt.sapj2ee.error [SAPEngine_Application_Thread[impl:3]_3] Fatal:
The last line with com.sap.portal.prt.sapj2ee.error is listed another 131 times, and there is also the following message:
### Excluding compile: com.sapportals.portal.prt.jndisupport.util.AbstractHierarchicalContext::lookup
We can connect to the system using Visual Administrator. Under Server->Services->Deploy, most applications are not running. It is possible to start a few applications manually, others however do not start showing different exceptions.
We have AS ABAP and AS Java installed, as well as BI, DI, EP and EPC. AS ABAP seems to be running fine.
We have also noticed the following deviations in JSPM:
BC_FES_IGS is Release 7.00 SP Level 7.0
EP_BUILDT is Release 7.00 SP Level 10.0
SAP_BUILDT is Release 7.00 SP Level 0.0
All other components except for the Kernel are Release 7.00 SP Level 11.0 or 11.2
What could be wrong, and what can we do to solve it?
Best regards,
Robert SchulteThanks for your response, usha rani
1. We already tried that, unfortunately, it does not help
2. We checked the kernel version thoroughly after you suggested it, everything seems to be fine. We had a Unicode kernel before, and we still have one.
3. safemode is already set to NO
4. J2EE's default.trace is full of exceptions, but none of them is pointing me into a helpful direction.
Perhaps the exceptions mean more to someone else:
java.lang.Exception: Exception loading and instanciating sub-manager:
com.sap.caf.km.repositorymanager.CAFSecurityManager
(java.lang.ClassNotFoundException: com.sap.caf.km.repositorymanager.CAFSecurityManager)
com.sapportals.wcm.repository.runtime.CmConfigurationProvider#
sap.com/irj#com.sapportals.wcm.repository.runtime.CmConfigurationProvider.Component
<SetRoomIdForDiscussionObjects> will not be available.
Failed to load class
<com.sap.netweaver.coll.room.impl.filter.DiscussionSetRoomIdPropertyFilterManager>
#J2EE_GUEST#0####1e820b50fe4111db8e780013724175b4#SAPEngine_Application_Thread[impl:3]_22
##0#0#Error##Plain###
java.lang.ClassNotFoundException:
com.sap.netweaver.coll.room.impl.filter.DiscussionSetRoomIdPropertyFilterManager
com.sap.portal.prt.runtime.broker#sap.com/irj#
com.sap.portal.prt.runtime.broker#J2EE_GUEST#0####
1e820b50fe4111db8e780013724175b4#SAPEngine_Application_Thread[impl:3]_22##0#0#
Error#1#/System/Server#Java###
[PortalServiceItem.startServices] service initialisation failed:
tc.eu.odi.conn.uwl|OdiBridgeService
[EXCEPTION]
{0}#1#com.sapportals.portal.prt.core.broker.PortalServiceInstantiationException:
Could not instantiate implementation class com.sap.tc.eu.odi.conn.uwl.OdiBridgeService
of Portal Service tc.eu.odi.conn.uwl|OdiBridgeService because: could not load the service
com.sap.engine.services.deploy.container.ApplicationInManualStartUpException:
Application sap.com/com.sap.portal.fpn.accessservice cannot be started
because is in MANUAL start-up mode.
There are many more entries in default.trace. -
Weblogic console not work after JDK reinstalled
Hi all:
After i reinstalled JDK 1.3.1, the weblogic console doesn't work any
more. Previously i am using jdk1.3, and the console works.
Weblogic server itself can run without any effect. But now when i
click console in windows startup menu, the error msg is "WEblogic Err
Occurred: Java dll not found. Bad value for JAVA_HOME................".
After i copied javai.dll into the every possible folder, it still
compliants this error.
What is happenning here? Do i have to reinstall weblogic? Actullay i
try to do that, but weblogic asks me to remove the previous installation
first, and make sure to remove some windows registration
items..............headache!
Does any one know how to get around this? Seems the sonsole is using
windows specific infor inclduing dll and registration.......etc.
Thanks.
minjiangOk, partly i solved the problem. Now i can run weblogic console by using
startconcole.cmd file, not the other one called weblogic\bin\wlconsolew.exe
(although previously i can).
Don't know what caused this.
Thanks.
minjiang
minjiang wrote:
Hi all:
After i reinstalled JDK 1.3.1, the weblogic console doesn't work any
more. Previously i am using jdk1.3, and the console works.
Weblogic server itself can run without any effect. But now when i
click console in windows startup menu, the error msg is "WEblogic Err
Occurred: Java dll not found. Bad value for JAVA_HOME................".
After i copied javai.dll into the every possible folder, it still
compliants this error.
What is happenning here? Do i have to reinstall weblogic? Actullay i
try to do that, but weblogic asks me to remove the previous installation
first, and make sure to remove some windows registration
items..............headache!
Does any one know how to get around this? Seems the sonsole is using
windows specific infor inclduing dll and registration.......etc.
Thanks.
minjiang -
Dialog Instance Java is not up after restoring the DB from Stand alone
Dear Gurus,
We are migrating our Stand alone Production (Dual Stack) system to Cluster hardware and we donu2019t have any dialog instances for Standalone Production system.In the process we have taken the backup from the stand alone system and restored in cluster.
After that, the dialog instance Java in is not coming up but central instance java was working fine
As per our analysis, due to only one entry is there for java in the stand alone database and the same database backup is restored in the cluster, the DI instance java is not coming up. Please any body give us the solution to resolve this issue.
Your earliest reply is very much appreciated.
Regards
KaliDear Manoj,
Thanks for your reply.
My Problem was solved.
As per SAP , it won't suggest or support the DB refresh. so did export and import then it was working fine.
Maybe you are looking for
-
CD drive problems "Directory doesn't exist"
Seems like everybody has some variant of this problem. I'm having difficulty getting the CD drive to read the disks I put in. I'm using PCman as my file manager and when I try to access the CD drive I get a pair of error messages that simply say ".
-
Set "E" for V1801 Message: Pricing error: Mandatory condition ZR01 missing
Dear All, I want to set below error message to appear as ERROR. Right now this message appear as a GREEN Color message. Therefore user can save the sales order without pricing. My requirement is to BLOCK the user from entering a sales order in to the
-
Iphoto is streaming very slowly with my new ATV 2? why?
I have about 100+ Events. Some Events have 20 pictures, some have 100 pictures; I have two issues 1) Trying to load an Event and the pictures in the Event I feel takes around 1min+ most of the times (feels like forever) - I dislike the experience 2)
-
Server is unwilling to perform -Error Message
All, I have an application that sync up to novell eDirectory and pull all the users from the eDirectory. During Sync up, i have seen a weared issue as 1. Assume we have 500 users in eDirectory - My application will be able to sync all the users and i
-
Hi, The Integration developers guide mentioned that the Corrective action codes and details in the oracle.apps.aia.core.eh.i18n.EHCorrectiveActionRB class. Do we need to write this class or is there any configuration file exists,which is referred by