Comments Tab and Request Justification Tab

Hi Everyone,
Our Mangement would like to further simplify the access request form and would want the comments tab removed from the access request form. Is this possible? I have not seen anywhere in the configuration area where this can be done.
Thanks,
Jerri,

Hi Jerri,
Removal of comment Tab form access request form is not possible in both the version of Access Enforcer 5.2 and 5.3.
You have to create enhancement request To SAP for this type of functionality.
Regards,
Jagat

Similar Messages

A report for 'Responsible CCtr' and 'Requesting CCtr' in Internal Orders

Hi All,
displaing the master data of an Internal Order, in the tab 'assignment' I can see the fields 'Responsible CCtr'
and 'Requesting CCtr'.
I wonder, is ther a report in which these field are recalled?
Thanks

Hi,
T-code KOK5.
Define a sel. variant, run KOK4 with this variant to create an order group, view this order group in KOK5 and in the layout choose the fields you need.
best regards, Christian

"Sign in to facetime" keeps appearing, and requesting a login

"Sign in to facetime" keeps appearing, and requesting a login. If I press CANCEL it immediately re-appears - less than 1 second interval, so very difficult to do any other operation in that time.
Additional issue, which may impact trying to solve the problem above:
My daughter set up my phone (on her iTunes) and the "Sign in to facetime" login is coming up with her (old) Apple ID - which is an EMail address that she no longer has access to.
I have my own (different) Apple ID - although that was not the one used to set up my phone.
I am happy to reset the phone / whatever to *my* Apple ID - but it is critical I don't lose all my contacts / phone numbers / Text messages. I have done a backup onto my PC, but I don't know (given mis-matching Apple IDs) if that will have backed everything important up such that I will be able to restore it. Backup gave a message that APPs were not backed up - the message mentioned something similar to a "permission-mismatch"
I don't think there is anything else on the phone that I need preserved (including any APPs - haven;t been able to buy any as phone is set up with my Daughter's (old) Apple ID
Thanks

I entered the password correctly, but it comes back saying the password is incorrect! I can confirm this by using a laptop with internet connection and the same username/password get accepted by logging iTune or even this website.
It turns out that the phone does not have any data connection: no wifi, no cellular turn on.
The ugly thing about this is that Apply/Facetime wrongly shows the message. Why doesn't it say "There is no connection to verify the username/password?"
STUPID!
After I quickly tab "Cancel" and able to turn on cellular network, enter the same password again, and the popup goes away.

Something keeps trying to download on my mac and I don't know what it is. It is not in the apple store and just comes out nowhere and request for my password to download something and I don't know what it is. How to make this stop?

Something keeps trying to download on my mac and I don't know what it is. It is not in the apple store and just comes out nowhere and request for my password to download something and I don't know what it is. How to make this stop? It pops up every single day.

Erica,
     I can, with 99.99% certainty, tell you that you are absolutely right in not wanting to download or install this "Helper," whatever it is (but we can be equally certain it would not "help" anything).
     I cannot comment as to Oglethorpe's recommendation of 'adwaremedic'; I am unfamiliar with it. His links to the Apple discussion and support pages warrant your time and attention.
     It might be really simple -- Trying looking in your Downloads folder, trash anything that you don't know with certainty is something you want to keep, and then Secure Empty your Trash. Then remove the AdBlock extension, LastPass, and Web of Trust extensions to Safari and re-boot. If the issue goes away, still be extraordinarily careful in the future.
     Unfortunately, it's probably not going to be that simple to get rid of, in which case I'd then try the line by line editing in HT203987.
     I have no further suggestions (other than a complete wipe and re-install...but that's a pain because trying to restore from Time Machine would simply ... restore the Mal).
   For the rest of us, please post when you find a solution.
     Best.
     BPW
(Also, try to edit your second post -- black out your last name on the screenshot and re-post it for others)

ARQ: Risk Mitigation Mandatory and Request Forward causing problem???

Hi,
I have a scenario where in, at a certain stage, "Risk Mitigation" is made mandatory and also "Forward Request" option is available at this stage for the same approver.
What is happening is that, when this approver tries to approve the request without mitigating the risks, it gives error message and request can not be approved. This is fine and going as per the configuration.
Now the same approver is trying to forward the request to some other person for some business reasons (with "WITH RETURN" check box checked and disabled). This request is reaching to the desired recipient as expected. But the problem is that, when after providing his comments (a business requirement before mitigating risks, if need be) if he tries to approve (submit) the request, application gives the same error message that: "Request can not be submitted. Mitigate Risk XYZ"!
Due to this, request can not be submitted and sent back to main approver! I noticed that, the request still lies on the same stage and the same stage configuration is being considered for this forwardee too!
This is keeping the request hanging as this forwadee is not authorized to mitigate the risks.
Can any one please help me resolve this?
Regards,
Faisal

Alessandro,
Thanks for your reply.
Now I see (as confirmed) that we have technical limitation or application design that when we forward a request, it DOES NOT change the stage (even I noticed this). So I was thinking that only we have "SUBMIT" button to send it back to the main approver.
But as you said, this forwardee can use the same "Forward Request" option instead of "Submit" button. This looks the option here which suits the situation.
But can you please tell me if we can do something to inform the forwardee that he must select "Forward Request" option and not Submit button?
Because, this submit button is visible and he can click it without knowing! And then this error message of Mandatory risk analysis then appears!
Is there any work around?
Please advise.
Regards,
Faisal

Difference between booked items and requested items

Hi Gurus,
I wanted to understand the difference between
Booking History - booked items – booked date
Booking History – requested items –booked date
The Series definition has the same definition given in the hint. I checked one of the below links for the same topic but couldn't get a full view.
Which series go to Actual_quantity in Standrad collections
Can any one let me know what the difference between booked items and requested items is? As I understand in OM, we have no differentiation. Do let me know
Thanks
DNP

Hi
In normal circumstances, there is no difference between requested item vs. booked item. But if you're using Item Substitution, these could be different. For example, a customer may call to request item A but for multiple reasons it may be substituted by a different item (usually an upgrade with similar form, function etc).
Oracle APS supports this functionality out of box in order promising and ASCP where it can be done based on a pre-defined relationship based on availability etc.
Hope this answers your question, please feel free to let me know if I may help calrify further
Navneet Goel
Inspirage
[email protected]

Do you have an option for block all incoming message and request EXCEPTED messages from my contacts?

Please help!!To whom it may concernDear Madam/Sir who works for Skype & Microsoft Dear all who can really help, Do you have an option for block all incoming message and request EXCEPTED messages from my contacts? or Do you have any solution to solve my problem from begin to now in present time? Even though, I set the Privacy settings: - Allow calls from... "people in my Contact list only"- Automatically received video and share screens with "people in my Contact list only"- Allow IMs from "people in my Contact list only" I still received unknow users sent me messages in every day, contact requests etc. And they're all clearly spammings and identity thefts. I only wanna contact with my family and my freinds here with Skype via my Windows device and my mobile phone (w/Android OS). And this is the only way to contact with them, because they could use Skype only in overseas. BUT I don't need new friend from other unknow Skype member. I keep blocked all unknow spammers in every day. However in this morning, I feel so scared with Skype on my mobile, I looked at my mobile Skype, I saw it automatically showed me the list of all blocked members. BUT they were all unblocked (contact unblocked) by my mobile (Android version) Skype itself automatically, and listed them one by one on the screen, and about 30 seconds later, they all were disappeared suddenly. I don't know what do to now, is it indicating my account was hacked?And how could I found out all those members again and block them again and delete all of them for ever? I appreciate if you would improve the privacy protection. Thank you very very very much.

Hrm... that may be true and this may be a function of the phone email client that Apple just doesn't do.
No, I can easily MANUALLY delete the messages. I would prefer if I didn't have to do it twice, tho. Once on the mail server and once on the phone.
What I think the phone needs to do is, when it checks the POP, anything NOT there should be removed locally. I think you are correct on POP; the phone will poll the mx (mail exchanger) and the mx will pass off the messages to the phone. The phone then keeps ALL of that unitl you manually delete it.
If, say, I remove a message from the mx, I would like the phone, when next polls, to see that that particular message isn't on the server anymore and remove it locally.
Perhaps it's just me but if I delete the message on the mx itself, via my ISP's webmail interface, I really don't want to have to remove it again from my phone.
thxs!
cheers
rOot

I have purchased a in app purchase of a 'gcsepod' for my little brother however the purchase does not come up in the app and requests me to buy another. How do i solve this? I have also got the receipt for this purchase.

i have purchased a in app purchase of a 'gcsepod' for my little brother however the purchase does not come up in the app and requests me to buy another. How do i solve this? I have also got the receipt for this purchase.

I'm not sure I can make sense of this but without asking too many questions, you can resolve your question by contacting iTunes direct.
Apple - Support - iTunes - Contact Us
But they will be wondering about the reference to hacking and you feeling bad about getting something for free.
Best step in my view is to make sure you don't get similarly involved in future. You must know roughly what you were doing. Then writie it off to a not to be repeated experience.

Creation of new package and request number.

Hi frndz,
Hope everyone are doing fine. Coming to my query, its quite simple for you guys.
But me being new to BW, I would like to know how to create a new package and request number.
And I have a task to create a new IS and DS also. So do i need to create these new package and request number separately or at the time of creation of IS and DS.
Please give me clear idea.
Thanking you.
regards
Dubbu

Hi Vinay,
I hope you are speaking about Package to collect Objects and collecting them in Transport Requests.
Usually you use the same packages for all the objects. According to requirement if you want to create the Package you can goto SE80--> There you can create a New Package. Give Transport layer as SAP. and Activate it. Then you collect the package in a Transport Request. You can create the request by the create button on the screen when it ask for Transport Request.
While creating the Infosource or other objects you mention the package which you have created while saving and you can use the existing TR or new TR for collecting them.
You can use RSA1---> Transport Connection to collect the objects easily to TR's
Regards
Karthik

Every time my IMAC is unused for a period, then goes to sleep mode, it loses it's wireless connection and when I wake it up, it DOES NOT automatically reconnect. I have to go to systme preferences network and request that it reconnect.

My iMac is set up wireless. Everytime it's allowed to go in sleep mode, it loses wireless connectivity. Then, when I wake it up, I must go to System preferences, Network, and request it to reconnect to my home wireless network. It always does this successfully, but it's quite annoying that it seems unable to achieve this on it's own. My iPad 2 and kindle can do this, why not my iMac?

This appears to be a known issue, there are a couple of things both of you should do, first file a bug report in www.apple.com/feedback.
The next thing is more a work around than a fix. Instead of putting your computer to sleep just put the display to sleep. You will find this in System Preferences - Energy Saver. Set the computer sleep to Never and then set the display sleep to what ever time you prefer.

How to make a original frame same with Comment List and Attachment?

How can I make original frame looking like Comment List?
I'm using Windows XP and Adobe Acrobat 9 Pro and Acrobat 9 SDK.
I want to make a new plug-in that use a new frame.
The new frame is looking like Comment List and Attachment.
I want to show my original list and input form to the frame.
It is close to Comment List frame, but I want to show original list.
Additionally, I want to add new button upper of Comments Button on Navigation Button Panel.
Can I have any help?

There is no support in the SDK for adding your own panels.
There is no support for modifying the existing panels.

How can I get the No. of package and requesting system name in user exit?

Dear all,
Is there anybody knowing how to obtain the extracting package number and requesting system name in the user exit "EXIT_SAPLRSAP_002" ? here is detail on my questions as below:
For package number. If extracting 100,000 records of 0MATERIAL_TEXT , and the package size is 20,000, then there are 10 packages, when executing the user exit, how can I know which package I am extracting on?
For requesting name, when executing the user exit, how can I know the logical system name from which the extraction request is sent?
Thanks.
best regards
Patrick

Hi Mansi,
Thanks for your quick response.
The background of this requirement is, in the datasource 0material_Plant_Att, we added two fields in the extraction structure, one is variable price, another is previous year's variable price, which need to be obtained by searching data KEKO & CKIS in the user exit, these tables have the huge data volume, in each data package, the user exit needs to be executed once, so the heavy searching needs to be done once, consequently, the total running time of this request including several data packages is very long. In order to improve the performance, we design the following logic:
1. Create the temporary tables YCKIS & YKEKO in R/3.
2. Run BW request in BIW.
3. In R/3, If this is first data package of this request, delete all data in YCKIS & YKEKO, then search the data from CKIS & KEKO ( Average 20 million records), then insert these data into YCKIS & YKEKO ( Average 0.2 million records).
4. In R/3, if this is not first data package of this request, then search the data directly from YCKIS & YKEKO.
You can see in the above, in the step 4, the data searching performance can be improved significantly due to reading data from temporary table, this is why I need to know the No. of data package. In addition, apparently, it can not be done in BIW side since the performance issue is in the user exit rather than in BIW. Also it is very difficult to setup one counter to deliver this since we do not know when to reset the counter. For example,
- Assuming there are 3 data packages.
- 1st day, we schedule one request from BIW, in R/3,
   -> At 1st package, counter = 0+1=1
   -> At 2nd package, counter =1+1= 2.
   -> At 3rd package, counter = 2+1= 3, then reset counter = 0 for next request.
Question 1: How can we know the 3rd package is last one?
Question 2: If during the 2nd package, the extraction job is cancelled exceptionally, the counter value is 2 not 0, then for the next request, the data searching is not correct, right.
Hope the above is clear, and apology this email is too long.
Thanks.
best regards
Patrick

Service and Request Offerings not listed in console library

The Service and Request offering sections are missing from the console.
Everything was working fine, now they are gone and I can't find what MP they are in to reimport.
SM 2012 SP1

Seems this was related to third party software. I redeployed the OOTB portal to confirm the issues. OOTB portal is using the correct permission scope from catalog groups.

Is it possible to use markers in a Premiere Pro sequence such as Chapter / Comment / Segmentation and export the XMP metadata for a database so that when the video is used as a Video On-Demand resource, a viewer can do a keyword search and jump to a relat

Is it possible to use markers in a Premiere Pro sequence such as Chapter / Comment / Segmentation and export the XMP metadata for a database so that when the video is used as a Video On-Demand resource, a viewer can do a keyword search and jump to a related point in the video?

take have to take turns
and you have to disable one and enable the other manually

Periodically the computer screen darkens and requests shutdown

Periodically the computer screen darkens and requests shutdown
this problem inturrupts almost everything and it started happening ever since i installed snow leopard
i want to format the computer and reinstall regular leopard because of this problem
Basically what happens is:
•The System freezes and the screen darkens a few shades.
•A message appears requesting that i hold the power button to shut off and restart.
•When i restart a message appears that says, "You shut your computer down because of a problem"
and it requests i report it
so i reported it its happened at least once a day everyday since i installed leopard on the 28th

This is, what they call a "Kernel Panic" - a unrecoverable error encountered by the Operating System during operation.
I assume, that you did a Upgrade Installation from Leopard or Tiger. There is probably some incompatible KernelExtension or Application remaining, which causes the problem.
Can you open Console.app in Applications > Utilities. Inside Console, you go to Diagnostic Information > System Diagnostic Reports. Here's a list of all recent Application / Kernel Crashes. You are interested in the following files: "kernel_<date and time of the Crash>". Click on a few of these. You will find some Information about the crash inside. If you're lucky, there's something like this inside: "BSD process name corresponding to current thread: <APPLICATION NAME>". This can help identify the faulty App.
Also you might want to try starting in Safe Mode. If the Problem does not appear there, it's most certainly some Issue with old Software.
Message was edited by: FlipChris

Comments Tab and Request Justification Tab

Similar Messages

Maybe you are looking for