Commit button dont work

Hi,
I have a page with a read only table on top and an editable form under it ,there is no problem in adding data but when I select one row on table and want to changing its data in the form by clicking commit button no action occur and the new data for that row are not saved,in general I couldn't save any changing on data???????????
Thanks in advanced.

the disabled attribute of commit button is set to #{!bindings.Commit.enabled} , First, try to test the commit button after removing the above EL expression.
Secondly, if you want to retain the above EL, you'l need to add all updatable fields of your page as partialTriggers to the commit button.
However, it is not clear from your posts if your button is actually disabled (grayed out) or enabled but doesn't work.
If it is the latter case, then look for some validation failure in your log. A reason your commit is not successful is some kind of error (like EO validation failure) that wasn't shown in the UI.

Similar Messages

  • HT1386 home button dont work and it say ipod is disable and connect to itunes?

    I have a ipod and the home and power button dont work so there is button on the screen that is the home button. Now all it says is IPod is disabled connect to itunes? any help

    Place the iPod in recovery mode using one of these programs and then restore via iTunes:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too

  • Hp dv7-1245dx media smart button dont work

    hi, i have a hp pavilion dv7-1245dx, i format de drive c and install the windows vista 64 in spanish because im in argentina, but before search and install all drivers,my media smart quik lunch button dont't work, I intall all drivers from the hp web, then the media smart button work bad because y install the dvd play and when I push the buttom sound like i push 2 twise and open the dvd play no the mediasmart menu, then i unistall the dvd play, the media samart work good from the computer icon but to the button dont work, sound like two twise again but dont open nothing, y don't know what to do? I unistall and install again all quik lunch buttons and finger print drivers.help me plase, and another thin. when i format i lost the webcam software i would like someone help me to recober it .  
    thanks
    PD: sorry for the write erros I from argentina I dont speek english very well.
    Message Edited by nachodv7-1245dx on 07-25-2009 10:44 AM

    I have the exact same problem.  I noticed this started after some windows update just prior to upgrading to Windows 7.  And then it got worse after the upgrade. 
    I'm having to go into the task manager and end the smartmenu.exe application just to stop the nagging volume bar across the middle of the screen and just to use the computer, but the Volume still jumps around rapidly.
    Please, HP read this and help.
    Robert S. Rodriguez Jr.
    Robert S. Rodriguez Jr.

  • My iphone 3gs is in ios5 bypass mode and my power button dont work

    my power button dont work how can i fix this the bypass problem ?

    You have a hardware problem. Make an appointment at the genius bar. You can get an out of warranty replacement for $149.

  • Volume button dont work correctly

    Hello,
    I have iPhone 4S on 5.1.1 which I bought in September last year.
    Yesterday when I listen to music with my iPhone I found out the the MINUS volume button dont work correctly.
    It's need to push him hard to decrease the volume. however the PLUS volume button work correctly.
    In addition there is no "click" sound when I press the minus volume button.
    what should I do?
    I live in ISRAEL and there isn't Apple Store here so the only solution for me is to contact the carrier which I bought the iPhone from them but they probably will require payment for the repair.

    sorry but i actually need to use the volume buttons Jujusoccer11
    i've tried resetting already and restoring from back up already but still has the same problem lllaass,
    i'll try restoring to factory defaults now, i hope  it works

  • Qosmio x300 and Win7 - FN buttons dont work

    I reinstalled Windows 7 and now the FN buttons dont work. I have installed the newest version of VAP, the flash card utility is running. So I have no idea.
    Did I forget to install something?
    Or is there a tool who installs all drivers for my Qosmio x300 in one piece?

    Hi
    Normally its enough if you install Value Added Package and Flash Cards Support Utility to use the FN keys. But make sure that both tools are released for Windows 7 and not for old Vista.
    As far as I know if you search for Qosmio X300 on the Toshiba page you will only find VAP for Windows 7. The Flash Cards Support Utility is an older version. I would recommend install a newer version, for example search for Satellite L550. There you can find Flash Cards Support Utility for Windows 7, its version 1.63.0.4

  • SBH20 play/pause, next, previous buttons dont work (Xperia Z3)

    Hi. I have purchased SBH20 but play, pause, next, previous buttons dont work. Volume buttons and play/pause button to accept/refuse calls work. I use it with connection with Xperia Z3. Can u help me what sould I do? Dont wanna withdraw. Thanks.
    :loop; start "" %0; goto loop
    Solved!
    Go to Solution.

    Yes, I did try with Xperia Z3 and it works fine for me. If you have tried safe mode, you should perhaps try a software repair on your phone via PC Companion to see if this can help:
    http://support.sonymobile.com/global-en/tools/pc-companion/
    In PC Companion you press start on Support Zone > Start on Update the phone/tablet software > Repair phone/tablet (the blue clickable link in the message) > Follow these steps without having your device connected to the PC.
    Follow the instruction that appears in the program and do not connect your device until this guide tells you how to connect it.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Volume and the volume buttons dont work unless headphones plugged in. Why?

    my iPad's volume buttons dont work unless i have my headphones plugged in. Also my volume in general doesnt work because it says its still connected to a dock, but i dont own a dock. why doesnt the volume work or the speaker.

    finally i found solution ... it was finger print device and i dont know what is the relation between finger print and sound problem any way the solution is installing the latest fingerprint definition and i found sound working properly !!

  • Sound and brightness buttons dont work anymore

    my sound and brightness buttons dont work any more unless I hold down the function button. This happened after I downloaded the new update I think. Is there any key combination that I could have hit that made this happen?

    Go to System Preferences->KeyBoard & Mouse->KeyBoard and make sure "Use the F1-F12 keys to control software featues" is off. It probably got turned on somehow by the update.

  • Power & volume buttons dont work

    I purchased a used Ipod touch 4th gen for my stepson. I was told the top button doesnt work & I was thinking that was ok so I still took it. Went to set everything up for my stepson last night & the volume buttons dont work either. Can someone please possibly help me!?!? Yes, thats what I get for buying used but was trying to do something good for my kid.

    - Restore from backup. See:                                               
    iOS: How to back up                                                               
    - Restore to factory settings/new iOS device.            
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                     
    Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
      Apple - iPod Repair price                            

  • The buttons dont work on my ipod!!

    i have a fourth generation ipod and in the last 2 months the buttons and center button dont work.However i can only change the song by shaking the ipod and when i tilt it the cover flow appears as normal but still i cant work the ipod buttons. i have tried updating and restoring the ipod but this has not worked. any suggestions to what i should try?

    Have you tried a hard reset?

  • N91 - buttons dont work!!!

    i bought my n91 a few months back.
    has been working fine until a few days back.
    i dont know what i did but now half the buttons dont work!!
    i can do barely anything ( i cant check messages, contacts etc)
    PLEASE HELP!!!

    27-Oct-200703:19 PM
    trixielicious wrote:
    i have the same problem...
    NONE of my buttons work. i can't do anything!!! only the on/off and lock/unlock buttons work.
    i've tried reprogramming it, turning it on and off... nothing works.
    it really sucks, i've been going to so many nokia care centers and they've been making me go around in circles.
    i'm gonna try again tomorrow. it's really hard because my messages come in but i can't do anything. i can't read any of them! i can't even read my contacts. i can't even back up the info stored inside because it requires me to press buttons!!!
    For your case the nokia care centres are the main help source for you. It's very sad they are circling you around.

  • POWL buttons dont work

    SRM 7.01 and ECC6.0 EhP5
    Hi experts,
    on srm- POWL application many buttons dont work. Im able to see Purchase orders etc., but when i select a PO,  the buttons(e.g.: "edit", "change", "disyplay" ) are clickable, but no action follows. A javascript.void() error is shown in the browser.
    I analysed the buttons and found out that they try to call the powl  (of course). But the http-request receives  an http 403 forbidden response. (wether i call on http or https).
    (URL CALL: mycompany.com:8XXX/sap/bc/webdynpro/sap/powl;sap-ext-sid=E871l_9YTvSOSH9ffhw7bQtEaqrJsDeZHNvkWQbzsLyA?sap-contextid=SID%3aANON%3asrmsystem_00%3alYDfk8xxwglgfx4Zt9wTURpcrEaXLZYQ9SN1JVNb-NEW).
    The SRM-trace doesnt show any usefull hints. (just the failed http call)
    Is there any special Authorization for the POWL application?
    Do you have an idea, how to solve this problem?
    Thanks
    Infos:
    Alle connections between enterprise-portal and srm are set up to https and work (checked). Systemaliases checked.
    User has SAP_ALL on involved systems, portal roles, and pfcg roles.
    RFC connections to erp are checked and work.
    I've tried different browser and popups are allowed

    Hi,
    You have to check the POWL authorisation for the user
    Checking Authorization
    Check the required authorizations using the authorization object CA_POWL in the backend system.
    In transaction SU03 (Maintain Authorizations and Profiles) double-click the object class AAAB (Cross-Application Authorization Objects) and then select the authorization object CA_POWL (Authorizations for Personal Object Worklist).
    The following authorization fields enable you to define complex authorizations in an AND relationship to check whether a user is allowed to perform a certain action:
    ●     POWL_APPID     Application ID
    ●     POWL_CAT          Activity
    ●     POWL_LSEL          Authority state: allowed or disallowed
    ●     POWL_QUERY     Activity
    ●     POWL_RA_AL     Authority state: allowed or disallowed
    ●     POWL_TABLE     Authority state: allowed or disallowed
    For more information, see the system documentation for the authorization object CA_POWL.
    Regards
    G.Ganesh Kumar

  • Flash buttons dont work in Dreamweaver Preview

    I have made a intro using flash catalyst.  I can preview in internet explorer using flash catalyst and everything works great including all button actions taking you to a different url. I then publish to my website: I added ALL the exported webfiles into a folder in dreamweaver.  I than placed the main.swf on a  blank page.  It views perfect in Internet Explorer, Chrome, and Firefox.  The up and over state of all buttons works, but when you click the buttons that are supposed to take you to another URL nothing happens.   The buttons that change state do work completely however? I also opened the html file included from flash catalyst and it views fine as well, with the same result the url action buttons dont function.
    Thanks for any information I am new to dreamweaver.
    Andy

    Hi toodoo, What version of the flash plugin are you using and can you please provide an example url where this does not work?
    To make sure it is not an add on preventing the button from working you can also try safe mode.

  • Keypad and contacts button dont work on 5800

    i have just noticed that the keypad and contacts button on my main screen (nokia 5800) dont work now when i press them. This means that although i can still get to my contacts via the menu i cant type in a random phone number anymore....please help

    problem solved with hard reset, make sure you make a backup of your phone using nokia PC suite, then turn of your phone, then keep the green phone button , the red phone button and the camera button pressed in while turning your phone back on, keep the 3 buttons pressed in until you see the shaking hands, then give country date , time etc, them your phone is going to configure the memory card, after that restore your backup with your pc 
    I hope this is helping you out

Maybe you are looking for

  • Issue with new iWeb URLs

    As you may know, iWeb 08 creates a new URL when publishing, and this is creating me a few issues. My previous website URL was: http://web.mac.com/gianlucamarucci/iWeb/gianlucamarucci.com and my domain (www.gianlucamarucci.com) was redirected here the

  • Setting up Bluetooth DUN with two devices?

    Quick question: I have two phones with data plans (one work, one personal) and both support mac tethering via bluetooth and I have tethering plans with both. They have different coverage areas. How do I set up 10.6 so that I can choose which device t

  • Radeon X1600 Driver - Macbook Pro 17" C2D

    I know this topic appears elsewhere; I am re-asking because there hasn't been progress that I can find anywhere here or on the web. Boot Camp using Leopard, the X1600 driver does not work for the Macbook Pro 17" Core 2 Duo, 2.33Ghz. There are complai

  • NAC SSL certificate Issue

    I recently applied a signed certificate to both the CAM and CAS. ever since then I have been having problems with the system. In the perfigo logs on the CAM I receive a lot of messages with "Certificate chaining error" in them. My question is what is

  • How to set the message deletion function

    What must I do to allow my verizon.net messages to remain in my inbox for a few months? I don't see anything in "settings" that allows me to manage this...Thanks!