Commit not working on web

Using Forms 6i Client/Server & on App Server
I have a form that runs in both client/server and on the app server.
In C/S it commits with no problems. On the App Server the commit does not work. No errors are produced. There is no ddl_commit in the form, just a straightforward 'commit'.
Can anyone shed any light on this mystery?

After further investigation, I have managed to replicate the problem in the Client/Server environment by changing the run time compatability mode in the form level properties to 5.0. It seems that 5.0 behavior is carried out by default when the form is run on the Application Server.
The problem was to do with a non display item having it's required property set to YES but not being populated. On the web, this item was being validated where as client server (where the runtime compatability mode property was 4.5 in the form), it isn't.
The form on-error trigger prevented the error from being displayed but once I got around that, I was able to track down the errant item! I guess the answer is to set the run time compatability mode to 5.0 when moving to the App Server to ensure consistent behavior with the Client/Server Environment.
The property and the differences between 4.5 and 5.0 are documented in the Forms Help system.

Similar Messages

"Execute" is not working in web reports

Friends,
" Execute" link is not working in web my report. And also the selection screen is blank for style sheets. Do you have any idea about the cause?
Joe

Also check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078
Hope it Helps
Chetan
@CP..

LOVs not working in Webi Report for SAP BO 4.1 SP 2 Patch 3

Hello ,
I have developed reports and universes in SAP BO 4.0 SP 5 and i have migrated those reports to higher version of BO which is 4.1 SP2 Patch 3.
My universe is working fine with LOVs but when i run the webi report , the LOVs arent working.
have anyone facing the same issue. any idea why the LOVs arent working on higher version.?

Hi Victor,
The List of values we will assign in universe in order to get filtered data works on universe query panel
but the same objects when i am using in report(webi report) , the List of values are not working .i.e
they are not getting displayed in webi report.
for ex: i have country object having country names as LOVs and state objects having state names as LOVs . Now when i select Country value , the LOVs of state objects should get filtered and shows only states which belongs to country .
the above logic is not working in webi report , i am only able to select country and when i go for state, the state names do not get filtered.
please let me know why this is happening in the SP2 patch 3 version and its working fine for SP2 , but the chrome issue gets solved after applying patch 3 and not if we only upgrade to SP2.
the webi reports are not working in chrome browser if we using SAP B04.1 SP2 and lower version
but the LOVs are not working in SAP BO 4.1 SP 2 patch 1, 2,3.
kindly help me with the issue

Javascript does not work in web browser

Hello friends.
I have a problem with javascript in my Captivate project.
This script only works in preview in Captivate, but does not work in web browser (IE 9, Mozilla, Chrome).
Anybody knows why?
Thank you for your answers.

Common JS interface
That is the official documentation for JS in Captivate 8. For more information, have a look at Jim Leichliter's website: CaptivateDev.com - eLearning Development with Adobe Captivate

BI Publisher not working with Web Cache

BI Publisher not working with Web Cache
I'm trying to enable BI Publisher to run from the internet. I have Web Cache (AS10g rel 2) in an internet DMZ, trying to work with BI Publisher running on a AS10g rel 3 server in a application DMZ. BI Publisher won't allow Web Cache to hide the URL after login. It tries to use the application server name as a URL and gets lost, since this is not resolvable from the internet. We have Content DB, other J2EE application installed in this same configuration, and it works fine.
This is duty managed as of today. They required an enhancement request, which I submitted. SR 6696835.993 -

Currently an enhancement - it was logged as that but IMHO its a bug as other Oracle products work OK - it kinda depends on whether its an ORacle strd to work with webcache or not. Suffice to say, we are investigating the issue and will update the er/bug soon.
Tim

Commit not working with actionBinding

I am having a bit of a problem, i am trying to change a value from an iterator (this part work fine) but can't commit this value for some reason but i get no error.
I click on the button that will change the value of the selected row in the table.
First sysout return the right value.
second sysout return "N" which is good.
third sysout return "Y" which is what i want to do.
I do have a commit action in my page definition.
I tried addind a button that will commit but no success here.
Any help ?
public String disableSelectedProject(){
RowKeySet selectedRowKeys = table1.getSelectionState();
//Store original rowKey
Object oldRowKey = table1.getRowKey();
if (selectedRowKeys != null)
Iterator iter = selectedRowKeys.getKeySet().iterator();
if (iter != null && iter.hasNext())
Object rowKey = iter.next();
System.out.println(rowKey.toString());
//set the current row in the ADF binding to the same row
DCIteratorBinding dcib = (DCIteratorBinding)bindings.get("ProjectList1Iterator");
dcib.setCurrentRowWithKeyValue(rowKey.toString());
Row rowData = dcib.getCurrentRow();
System.out.println( rowData.getAttribute(ProjectListRowImpl.ISDELETED));
//set the field flag to Deleted
rowData.setAttribute(ProjectListRowImpl.ISDELETED, "Y");
System.out.println( rowData.getAttribute(ProjectListRowImpl.ISDELETED));
//commit the transaction - for iterators Not working for this case.
JUCtrlActionBinding actionBinding = (JUCtrlActionBinding)bindings.get("Commit");
actionBinding.execute();
//refresh list
DCIteratorBinding iterator = (DCIteratorBinding)bindings.get("ProjectList1Iterator");
iterator.executeQuery();
//Restore the original rowKey
table1.setRowKey(oldRowKey);
return "";
Thank you

hi Charles
... I am using Jdev 10.1.3.1.1 and use Application Dev framework documentation. But i did not start at the beggining of the project so i was able to looked at the code already there. ...You might want to review documentation sections:
- "8 Implementing Business Services with Application Modules "
at http://download.oracle.com/docs/cd/B32110_01/web.1013/b25947/bcservices.htm
- "24 Testing and Debugging Web Applications "
at http://download.oracle.com/docs/cd/B32110_01/web.1013/b25947/web_testdebug.htm
You also might want to try to add more System.out.println() statements to see which statements get executed and which don't, and combine that with some try-catch statements (maybe for the whole method) like this
try
    ; // some statements
catch(Throwable th)
    th.printStackTrace();
    throw new RuntimeException("statements failed, th = " + th, th);
}success
Jan

Swing components in applet not working in web browser

Hi Guys,
I've created an applet which makes use of some swing components, but unfortunately, not all of them function properly in my web browser (internet explorer or Mozilla Firefox). Its mainly the buttons; the last buttons works and displays the correct file within the broswer, but the first 5 buttons do not work...
any help please on how I can sort this problem out?
Heres the code for my applet:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.applet.*;
public class MainAppWindow extends JApplet
int gapBetweenButtons = 5;
final JPanel displayPanel = new JPanel(new BorderLayout());
public void init()
   //Panel for overall display in applet window.
   JPanel mainPanel = new JPanel(new BorderLayout());
   mainPanel.add(new JLabel(new ImageIcon(getClass().getResource("images/smalllogo2.gif"))),BorderLayout.NORTH);
   //sub mainPanel which holds all mainPanels together.
   JPanel holdingPanel = new JPanel(new BorderLayout());
   //Panel for displaying all slide show and applications in.
   displayPanel.setBackground(Color.white);
   displayPanel.add(new JLabel(new ImageIcon(getClass().getResource("images/IntroPage.jpg"))),BorderLayout.CENTER);
   displayPanel.setPreferredSize(new Dimension(590,400));
   JPanel buttonPanel = new JPanel(new GridLayout(6,1,0,gapBetweenButtons));
   buttonPanel.setBackground(Color.white);
   JButton button1 = new JButton("User guide");
   button1.addActionListener(
     new ActionListener() {
          public void actionPerformed(ActionEvent e)
               if(displayPanel.getComponents().length > 0)displayPanel.removeAll(); // If there are any components in the mainPanel, remove them and then add label
               displayPanel.setBackground(Color.white);
               displayPanel.add(new JLabel(new ImageIcon("images/UserGuide.jpg")));
               displayPanel.revalidate(); // Validates displayPanel to allow changes to occur onto it, allowing to add different number images/applicaions to it.
   JButton button2 = new JButton("What is a Stack?");
   button2.addActionListener(
   new ActionListener() {
           public void actionPerformed(ActionEvent e)
               if(displayPanel.getComponents().length > 0)displayPanel.removeAll();
               displayPanel.setBackground(Color.white);
               displayPanel.add(new JLabel(new ImageIcon("images/WhatIsAStack.jpg")));
               displayPanel.revalidate();
   JButton button3 = new JButton("STACK(ADT)");
   button3.addActionListener(
   new ActionListener() {
         public void actionPerformed(ActionEvent e)
               if(displayPanel.getComponents().length > 0)displayPanel.removeAll();
               displayPanel.setBackground(Color.white);
               displayPanel.add(new JLabel(new ImageIcon("images/StackADT.jpg")));
               displayPanel.revalidate();
   JButton button4 = new JButton("Stacks in the Real World");
   button4.addActionListener(
   new ActionListener() {
         public void actionPerformed(ActionEvent e)
               if(displayPanel.getComponents().length > 0)displayPanel.removeAll();
               displayPanel.setBackground(Color.white);
               displayPanel.add(new JLabel(new ImageIcon("images/StacksInTheRealWorld.jpg")));
               displayPanel.revalidate();
   JButton button5 = new JButton("DEMONSTRATION");
   button5.addActionListener(
   new ActionListener() {
         public void actionPerformed(ActionEvent e)
             if(displayPanel.getComponents().length > 0)displayPanel.removeAll();
             Demonstration app = new Demonstration();
             JPanel appPanel = app.createComponents();//gets the created components from Demonstration application.
             appPanel.setBackground(Color.pink);
           displayPanel.add(appPanel);
           displayPanel.revalidate();
   JButton button6 = new JButton("Towers Of Hanoi");
   button6.addActionListener(
   new ActionListener() {
         public void actionPerformed(ActionEvent e)
                 if(displayPanel.getComponents().length > 0)displayPanel.removeAll();
                 TowerOfHanoi app = new TowerOfHanoi();
                 JPanel appPanel = app.createComponents();//gets the created components from Towers of Hanoi
                 JPanel mainPanel = new JPanel();//panel used to centralise the application in center
                 mainPanel.add(appPanel);
                 mainPanel.setBackground(Color.pink); //sets mainPanel's background color for 'Towers Of Hanoi'
                 displayPanel.add(mainPanel);
                 displayPanel.revalidate();
   //adding buttons to the buttonPanel.
   buttonPanel.add(button1);
   buttonPanel.add(button2);
   buttonPanel.add(button3);
   buttonPanel.add(button4);
   buttonPanel.add(button5);
   buttonPanel.add(button6);
   JPanel p = new JPanel(); // Used so that the buttons maintain their default shape
   p.setBackground(Color.white);
   p.add(buttonPanel);
   holdingPanel.add(p,BorderLayout.WEST);
   holdingPanel.add(displayPanel,BorderLayout.CENTER);
   //Positioning of holdingPanel in mainPanel.
   mainPanel.add(holdingPanel,BorderLayout.CENTER);
   //indent mainPanel so that its not touching the applet window frame.
   mainPanel.setBorder(BorderFactory.createEmptyBorder(10,20,10,20));
   mainPanel.setBackground(Color.white);
   mainPanel.setPreferredSize(new Dimension(850,600)); //size of applet window
   mainPanel.setOpaque(false); // Needed for Applet
   this.setContentPane(mainPanel);
}

Thanks for the response. I don't quite understand what you're talking about though. I have, in my humble knowledge, done nothing with packages. I have put the applet class (WiaRekenToolActiz.class is the applet class) in the jar file wia_actiz_archive.jar. From what I read on the tutorial, java looks for the applet class in all the jar files specified. Since I put my CODEBASE as the main url, I thought it baiscally didn't matter where you out the html file.
I shall include the complete html page complete with applet tag to perhaps illuminate a bit more what I mean...
<html>
<head>
<title>Wia Rekenmodule hello!</title>
</head>
<body bgcolor="#C0C0C0">
<applet
CODEBASE= "http://www.creativemathsolutions.nl/test"
ARCHIVE= "Actiz/wia_actiz_archive.jar, Generic/wia_archive.jar"
CODE="WiaRekenToolActiz.class"
WIDTH=915 HEIGHT=555
>
<PARAM NAME = naam VALUE = "Piet Janssen">
<PARAM NAME = gebdag VALUE = "01">
<PARAM NAME = gebmaand VALUE = "06">
<PARAM NAME = gebjaar VALUE = "1970">
<PARAM NAME = geslacht VALUE = "man">
<PARAM NAME = dienstjaren VALUE = "10">
<PARAM NAME = salaris VALUE = "56500">
<PARAM NAME = deeltijdpercentage VALUE = "100">
<PARAM NAME = accountnaam VALUE = "Zorginstelling 'De Zonnebloem'">
</applet>
</body>
</html>

Right click is not working in Web dynpro explorer

Hi All,
I have SAP net weaver developer studio 2.0.9.
when i right click on web dynpro components, to create a component, the context menu is not coming, right click is not working.
though right click works fine in diagram view and outline view.
Please suggest what might have happened? and how to get back the settings.
Cheers,
Srini.

Hello Srinivas,
Try closing and opening NWDS. If you still see the same problem, simple solution for this is, Just Change Workspace to new folder.
Changing workspace - Window -> Workbench -> workspace -> give new path.
Close nwds and open it again. It should solve the problem.
Thanks,
Sridhar

Diagnostics not working in web role for Azure SDK 2.5.1

I am working with Azure SDK 2.5.1, mainly on the new designed diagnostics stuffs. However, I found I cannot get it run for my web role.
So, I created a cloud service project, added a web role. Then, I appended one Trace message at the end of Application_Start in Global.asax.cs:
Trace.TraceInformaction("Application_Start end.");
After that, I right clicked the WebRole and opened the Properties tab.
In the diagnostics config window:
General: I choose 'Custom
plan', also specified the storage account, keep the 'Disk
Quota in MB' as default '4096'
Application Logs: 'Log
level' switch to 'All',
others kept as default
Other tabs are in default config settings
After I deployed the project to cloud, I found some unexpected things:
There is no WADLogsTable exists
in Table storage. That's very strange, if I use a Worker Role, it would work as expected. So in web role, I just cannot find the Trace logging?
For the performance counters, since I am using the default config with 8 counters, I can only see 8 in WADPerformanceCountersTable table
storage. In my assumption, over time, there would be more and more values of this 8 counters transferred to this table. But it was just not happened, after several hours, it still had that 8 counter values.
I just thought the diagnostics for Web Role just crashed or not working at all. Meanwhile, I checked the logs located at "C:\Logs\Plugins\Microsoft.Azure.Diagnostics.PaaSDiagnostics\1.4.0.0\DiagnosticsPlugin.log" in
server, at the end of this file there is an exception said some diagnostics process exit:
DiagnosticsPlugin.exe Error: 0 : [4/25/2015 5:38:21 AM] System.ArgumentException: An item with the same key has already been added.
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
at Microsoft.Azure.Plugins.Diagnostics.dll.PluginConfigurationSettingsProvider.LoadWadXMLConfig(String fullConfig)
DiagnosticsPlugin.exe Error: 0 : [4/25/2015 5:38:21 AM] Failed to load configuration file
DiagnosticsPlugin.exe Information: 0 : [4/25/2015 5:38:21 AM] DiagnosticPlugin.exe exit with code -105
From MSDN,
the code -105 means:
The Diagnostics plugin cannot open the Diagnostics configuration file.
This is an internal error that should only happen if the Diagnostics plugin is manually invoked, incorrectly, on the VM.
It doesn't make sense, I did nothing to the VM.
As I said above, I just did very tiny changes to the scaffold code generated by Visual Studio 2013. Did I do something wrong or it's a bug for Azure SDK 2.5?
By the way, it seems everything is ok for Worker Role.

Hi,
This issue could be an internal issue, I do not have any update on this as of now. There was a similar issue due to a regression last month that has been resolved, however i dont think this issue is related.
Please follow the below article on how to enable Diagnostics and let us know if it works.
http://azure.microsoft.com/en-in/documentation/articles/cloud-services-dotnet-diagnostics/
I will let you know if I have any update on this issue from my side.
Regards,
Nithin Rathnakar.

Query level filter not working in Webi report

Hi All,
I am using BOXI R3.1 (SP3), m facing one problem when refreshing Webi report on daily basis. I am using three query level filter as a prompt, but i checked one filter is not working then i need to reapply this filter and rest 2 filter is working fine.
Can anyone suggest me why problem is coming?
Regards,

Hi,
Prompts are interactive, and come from the query panel. Filters are not interactive, and are set on the report or block. There are also input controls, which are interactive filters
1. Select the universe in the list of universes to open the Query Panel.
2. Drag the Year object to the Result Objects pane.
3. Drag the Number of Guests object to the Query Filters pane and create a report filter that restricts Number of Guests to greater than n.
4. Click Combined Query.
The Combined Query pane appears in the bottom left of the Query panel with the two queries joined by UNION.
5. Click on the second query and remove the Year and Number of Guests objects.
6. Drag the Reservation Year object to the Result Objects pane.
7. Drag the Future Guests object to the Query Filters pane and create a report filter that restricts the future guests to greater than n.
8. Click Run Query.
Best Regards
Naveen

TH_DELETE_MODE not working in Web GUI after EHP7 upgrade

Hi
After upgrading to EHP7 the function module TH_DELETE_MODE is not working in the Web GUI. If I start the TH_DELETE_MODE in SE37 with the default paramter "1-" I'll get the HTTP error code 500. We use the function module for our webdynpro to logout but it is not working anymore.
Any idea or recommendation?
Thank you and best regards, Ronny

Your server-side include has all of the HTML on it for a full
page.
Strip everything from it except the stuff you want to
include.
http://www.fordwebs.com/mx-asp/ssi-index.asp
Ken Ford
Adobe Community Expert
Fordwebs, LLC
http://www.fordwebs.com
"ValsGalore" <[email protected]> wrote in
message news:f019c0$in1$[email protected]..
>I just recently began work on an existing Web site, which
includes the file
> nav.asp on every page. After I made some changes to one
of the pages (it's
> temporarily located at
http://www.enviroglasproducts.com/reps5.asp),
I found
> that when I closed it and reopened it in Dreamweaver, I
could no longer see the
> page in preview mode.
>
> It shows my </head> tag highlighted in yellow, but
won't let me click on it.
> In code view, the <table> tag, which is the first
tag after <body>, is "marked
> as invalid because it's an overlapping or unclosed tag."
I've been over this
> document several times, but I cannot find any errors in
the construction of the
> table.
>
> If I copy all the content into an identical page, it
will look fine in
> Dreamweaver until I close it and reopen it, and then I
will have the same
> problem.
>
> Oddly, when I remove the  from the second cell
> of the main table, then everything looks fine.
>
> Other points worth mentioning are that (until I delete
it), nav.asp shows up
> in its proper location in reps5.asp, but nothing else
does except for the image
> that appears right above it.
>
> In other pages on the site, the included nav.asp does
not show up in
> Dreamweaver at all.
>
> Can anyone think of why this is happening?
>
> Thanks!
>

Not Working-central web-authentication with a switch and Identity Service Engine

on the followup the document "Configuration example : central web-authentication with a switch and Identity Service Engine" by Nicolas Darchis, since the redirection on the switch is not working, i'm asking for your help...
I'm using ISE Version : 1.0.4.573 and WS-C2960-24PC-L w/software 12.2(55)SE1 and image C2960-LANBASEK9-M for the access.
The interface configuration looks like this:
interface FastEthernet0/24
switchport access vlan 6
switchport mode access
switchport voice vlan 20
ip access-group webauth in
authentication event fail action next-method
authentication event server dead action authorize
authentication event server alive action reinitialize
authentication order mab
authentication priority mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
spanning-tree portfast
end
The ACL's
Extended IP access list webauth
    10 permit ip any any
Extended IP access list redirect
    10 deny ip any host 172.22.2.38
    20 permit tcp any any eq www
    30 permit tcp any any eq 443
The ISE side configuration I follow it step by step...
When I conect the XP client, e see the following Autenthication session...
swlx0x0x#show authentication sessions interface fastEthernet 0/24
           Interface: FastEthernet0/24
          MAC Address: 0015.c549.5c99
           IP Address: 172.22.3.184
            User-Name: 00-15-C5-49-5C-99
               Status: Authz Success
               Domain: DATA
       Oper host mode: single-host
     Oper control dir: both
        Authorized By: Authentication Server
           Vlan Group: N/A
     URL Redirect ACL: redirect
         URL Redirect: https://ISE-ip:8443/guestportal/gateway?sessionId=AC16011F000000510B44FBD2&action=cwa
      Session timeout: N/A
         Idle timeout: N/A
    Common Session ID: AC16011F000000490AC1A9E2
      Acct Session ID: 0x00000077
               Handle: 0xB7000049
Runnable methods list:
       Method   State
       mab      Authc Success
But there is no redirection, and I get the the following message on switch console:
756005: Mar 28 11:40:30: epm-redirect:IP=172.22.3.184: No redirection policy for this host
756006: Mar 28 11:40:30: epm-redirect:IDB=FastEthernet0/24: In epm_host_ingress_traffic_qualify ...
I have to mention I'm using an http proxy on port 8080...
Any Ideas on what is going wrong?
Regards
Nuno

OK, so I upgraded the IOS to version
SW Version: 12.2(55)SE5, SW Image: C2960-LANBASEK9-M
I tweak with ACL's to the following:
Extended IP access list redirect
    10 permit ip any any (13 matches)
and created a DACL that is downloaded along with the authentication
Extended IP access list xACSACLx-IP-redirect-4f743d58 (per-user)
    10 permit ip any any
I can see the epm session
swlx0x0x#show epm session ip 172.22.3.74
     Admission feature: DOT1X
     ACS ACL: xACSACLx-IP-redirect-4f743d58
     URL Redirect ACL: redirect
     URL Redirect: https://ISE-ip:8443/guestportal/gateway?sessionId=AC16011F000000510B44FBD2&action=cwa
And authentication
swlx0x0x#show authentication sessions interface fastEthernet 0/24
     Interface: FastEthernet0/24
     MAC Address: 0015.c549.5c99
     IP Address: 172.22.3.74
     User-Name: 00-15-C5-49-5C-99
     Status: Authz Success
     Domain: DATA
     Oper host mode: multi-auth
     Oper control dir: both
     Authorized By: Authentication Server
     Vlan Group: N/A
     ACS ACL: xACSACLx-IP-redirect-4f743d58
     URL Redirect ACL: redirect
     URL Redirect: https://ISE-ip:8443/guestportal/gateway?sessionId=AC16011F000000510B44FBD2&action=cwa
     Session timeout: N/A
     Idle timeout: N/A
     Common Session ID: AC16011F000000160042BD98
     Acct Session ID: 0x0000001B
     Handle: 0x90000016
     Runnable methods list:
     Method   State
     mab      Authc Success
on the logging, I get the following messages...
017857: Mar 29 11:27:04: epm-redirect:IDB=FastEthernet0/24: In epm_host_ingress_traffic_qualify ...
017858: Mar 29 11:27:04: epm-redirect:epm_redirect_cache_gen_hash: IP=172.22.3.74 Hash=271
017859: Mar 29 11:27:04: epm-redirect:IP=172.22.3.74: CacheEntryGet Success
017860: Mar 29 11:27:04: epm-redirect:IP=172.22.3.74: Ingress packet on [idb= FastEthernet0/24] matched with [acl=redirect]
017861: Mar 29 11:27:04: epm-redirect:IDB=FastEthernet0/24: Enqueue the packet with if_input=FastEthernet0/24
017862: Mar 29 11:27:04: epm-redirect:IDB=FastEthernet0/24: In epm_host_ingress_traffic_process ...
017863: Mar 29 11:27:04: epm-redirect:IDB=FastEthernet0/24: Not an HTTP(s) packet
What I'm I missing?

ODBC not working in WEB FORM(Dev6i)!!!

Hi :
I found ODBC are not working in Dev6i Web Forms , my reports all based on excel though ODBC .
Can anyone help me to solve this problem ?
Help me !!!!
Thanks in advenace !!!

Answering Oracle Reports questions is a bit out of my league, but I deal with a lot of ODBC apps, so I'll take a shot.
Try doing the following-
1) Open the Control Panel, Open the Data Sources (ODBC) control, and select the DSN you'll be using.
2) Put mnewman in the User ID field and mnn4578 in the password field.
3) I'm not familiar with the Oracle Reports dialog you're referring to when you say "I put in mnewman/mnn4578@ODBC:*", but make sure that you aren't providing more information than is being asked for (i.e. putting user/password@ODBC:* in a field that just asks for username). Since it's asking you to pick a DSN, it should be able to pull username/password information from the DSN.
Justin Cave
ODBC Development

Get_file_name is not working on web

hello friends,
i am developing one form that include open dialog on when button press trigger
it will work well but when running that form on web is not working
also don't show any kind of error
so, how to solve this proble
i am using forms 6i..
any other option 4 that
i have tried win_api_dialog but when i running that on web then it gives me error
frm-40734
thanx in advance

You cannot use GET_FILE_NAME in a web form because it will attempt to open the dialog box on the server and not the client.
In a web form, only the presentation layer is seen by the end-user. All of the pl/sql is executed on the application server.
You will need to create a Java Bean to perform any client side tasks in a web form for version 6.x. In Forms 9.x and newer we offer WebUtil. WebUtil is an add-on which offers many client side features. Unfortunately, WebUtil is not supported for use in Forms 6.x. Further Forms 6 is no longer supported.
http://www.oracle.com/technology/products/forms/htdocs/webutil/webutil.htm

Javascript not working with web.show_document.

Hi,
I executed the below command from forms 10g and it is not working.
web.show_document('javascript:var win=showModalDialog("http://otn.oracle.com/products/forms");','_self');
But if I execute javascript:var win=showModalDialog("http://otn.oracle.com/products/forms"); directly in IE, then it is working.
Frank, can you help me in this or any other people having any idea ?
Very urgent.
Thanks & Regds,
Nandakumar

Hi Mark,
Thanks for your quick reply. Your question is right. I think let me explain clearly my requirement. I have an application accessed in the web. A internet user is trying to a report through the application by giving a parameter as "A". Now using the window.open method, the report is displayed in the IE browser. Now the user can go to history and can see the complete URL with parameters.
If he just copies and pastes that url from history in the browser, the reports runs successfully. If he changes any of the parameter to "B", there is a chance that report will show the report for parameter "B". This should not happen.
Hope this is clear. Let me know if you are not still clear. Moreover, in the IE it is possible to clear history, but for internet based applications, how can we set them.
Thanks & Regds,
Nandakumar

Commit not working on web

Similar Messages

Maybe you are looking for