Commitment Carry Forward in the year end closing!

Hi All,
We have a lot of open PRs and POs against Internal orders and WBS at the year end and we also have the budget control activated. Now we are going to do the year end closing. My question is:
1. Who should do the commitment carry forward, supply chain or FI team?
2. If supply chain will do the PR or PO carry forward, will FI team also need to run the commitment carry forward (KOCF or CJCF) from FI side at the same time or not necessary?
Thanks,
Ting

Hi Abhinay,
Thanks for the answer.
When you say they have to perform year end activities like checking PO and PR, what actually they are doing? Do they just need to check whether those PO or PR are required (if not, close them) or they need to do something more? . As far as I know, no steps like checking PO and PR are required here. So I am wondering whether we have missed anything or not. Can you give me some details about that step?
Also, if we are using only Total value for the budget, not annual value, I don't need to do the budget carry forward closing step. In this case, do I need to do the commitment carryforward step?
Thanks,
Ting

Similar Messages

Fiscal year variant V3 uFF0Cdo year end closing

Hello everyone,
I use the Fiscal year variant V3(month 4 year *-month 3 year **+1) for the HK company ,and Dec. 2009 I did the year end closing, but I found that,the amount of GL Account balance carry of 2010 is not the cumulative balance of 2009,but just the balance of Dec. 2009;IN fs10n double click the balance carry of 2010, the detail is the cumulative balance of 2009.What can I do the amount of GL Account balance carry of 2010 will right?
Thank you for your answer.
Best Regards
Doris

Hi,
You can try carrying forward, GL, customer and vendor balances from the beginning. There is no impact even if you execute again.
Best Regards,
Madhu

Cannot execute year-end closing in IDES R/3 4.71

Hi Gurus,
I am working with IDES R/3 4.71.
since the current fiscal year in system in 2003, i try to change the fiscal year to 2004, then 2005, ..., finally I wish to get fiscal year 2009.
during the procedure, i need to post AA depreciation for each period of 2003. I have done that successfully with AFAB. then I also successed with Change Fiscal Year to 2004. now I need to execute year-end closing for 2003. but the system reports errors.
error message like below:
=========================================================
Asset balance sheet values not completely posted
Message no. AU075
Diagnosis
In company code 1000, which is to be closed, APC values have not been posted to Financial Accounting for all relevant depreciation areas.
Depreciation area 03, at least, is set up for periodic posting of APC values.
The year-end closing checks if documents were posted that have an entry date after the last run of the program for periodic posting of APC values. If such documents are found, the system issues this message.
Procedure
Check which depreciation areas are supposed to post APC values periodically to Financial Accounting according to their Customizing definitions (indicator: "Post assets periodically in General Ledger")
See the Define How Depreciation Areas Post to General Ledger IMG activity.
Start the program for posting APC values. In the Asset Accounting main menu, choose Periodic processing . Start this program in update mode, regardless of whether or not documents are displayed in test mode, or if a message appears stating that there are no documents to be posted.
Start APC Posting Program
==================================
I didn't change the depreciation area provided by IDES group.
anybody knows what's wrong?
many thanks!
George

George,
The long text seems to be self-explanatory. IDES comes with pre-configured stuff. So for sake of training they may have designated some depreciation areas as periodic posting. Please follow the instructions in the message and try to resolve it.
If I were you:
a) I would find out the chart of depreciation for the company code you are trying to do a fiscal year close.
b) Then go to the configuration and see the definition of each depreciation area.
c) For those which have periodic posting of depreciation, run the corresponding program as instructed in the long text.
Regards,
Vishal.

AJAB year-end closing no data

Hi,
We are running transaction AJAB for year end closing of Asset Accounting. We are trying to close fiscal year 2010.
In test run, it is showing no errors, but it is also not displaying any data. I expect it to show some information on the assets that will be affected, though no data is being shown.
What could be the problem? I noticed that depreciation may need to be recalculated (AFAR). Could this affect year-end closing?
Thanks,

Hello,
This transaction will not show you any data since it is only required for the technical purposes. While running t-code AJAB, is displaying "NO" under the "Other Error" column then it means you don't have any issues while doing the year end-Closing.
Did you make any changes to any asset after completing your depreciation run for 12 month? If yes, then it is recommended that you do run transaction "AFAR" so the depreciation will be correcting for that asset before you actually do the year end closing for Fixed Asset.
However, if you are sure that you have not made any changes to any of your assets then you don't have to recalculate the depreciation.
Thanks

Year end closing (Balance carried forward

Hi
Please help. Our company did not do a year close on debtors and vendors. I realised it now with certain debtors, that their closing balance (June 2006) do not agree to the opening balance (July 2006).
Can one do a closing on the sub-ledger (Debtors & Vendors) as well as for the GL. What affects will it be having on our books or is it save to do it.

Hi Theo,
There is probably nothing much you can do to bring the balances to what it should have been by end of June as some debtors would probably have paid amount owed before June 2006 and you may have paid some Creditors too.
Your best bet is to still go ahead and carry out the year end closure of all the various sub-ledgers that has not been done. Once you've completed this, you may then want to embark on a reconciliation process to determine the exact balances as at June 2006 by analysing all payments received from Debtors to see which ones relates to prior 30 June 2006 and adding these back to get the correct figures as at end of June 2006. You would have to do the same for all Vendor payments you have made.
Just to be sure you have not left out anything from your year-end processes, the following would be very useful and handy as a guide. (Though some of them may not be applicable to your organisation)
1. CJCF - Carry Forward Commitments For WBS Elements
2. CJCO - Carry Forward Budgets For WBS Elements
3. IM27 - Carry Forward IM Budget
4. F.07 - Execute AP/AR Carry Forward
5. ABST2 - Reconcile FI-AA Ledger
6. AJRW - AM Fiscal Year Change
7. OAAQ - Check Last Fiscal Year Closed
8. AJAB - AM Year End Closing
9. F.16 - Execute FI Year-End Roll-Over
10. FS10N - Check G/L Opening Balances
11. GJ10 - Execute JVA Year-End Roll-Over
12. GVTR - Execute Special Purpose Ledger Year-End Roll-Over
13. 2KES - Profit Center:Carry Forward of Actual Balance
14. OKP1 - Close All Periods in Old Fiscal Year For CO
15. KSCF - Cost Centers Carry Forward
16. KOCF - Internal Orders Carry Forward
I hope the above helps.
Thanks and Regards,
Jacob
PS: Do not forget to award the points

What are the year end and month end activities carried in FI?

Hi all,
I am new to FI, what is the steps or the activites/process to be carried out during the month end as well as the year end activities for FI.
Can anyone explain me about it and does sap provide any standard documentation on year end / month end activities.
Thanks
Pooja

Hi Pooja,
Please find the details below
Month end closing Activities
1. All the expenses including amortization, prepaid expenses, Preliminary expenses and accruals have been booked.
2. Complete Bank Reconciliation (T. Code: FF67)
3. Make sure that Sum of Inter Company balances is Zero
4. Suspense Accounts should be cleared regularly.
5. Ensure that all documents related to MM & SD have been entered in system. (T.Code:F-22 & F-43) 6. Ensure that all billing documents are released to accounting.
7. Calculate Overheads on all process Orders (CO43)
8. Technically complete all process orders which are fully processed (CORM).
9. Calculate Variance (KKS1)à (Relevant only if Standard cost is calculated).
10. Settle all process orders which are technically complete (CO88).
11. Close All settled Process Orders
12. Close MM period (Transaction Code: MMPV).
13. Carry out GR/IR clearing (F.13) transaction
14. Depreciation Run (AFAB) has been carried out for the month
15. Close FI Posting period after the month end closing activity is over (T.Code:OB52) Year end
Closing Activities:
1. Calculate production work in progress on process orders which are not technically complete. (CO88).
2. Carry out Assessment cycle for Cost Centers (T. Code: KSUB)
3. All month end closing Activities should be carried out.
4. Carry Forward Balances to next year With TC: F.16 we can carry forward the balance to next year. With TC: OBH2 copy the number ranges to next year Open next year periods by selecting the Posting Period Variant. then test by posting the transaction in F-02)
SAP FI Month End and Year End Activities
1 - Maintain Activity prices - KP26
2 - Release of Standard Cost Estimate - CK40N
3 - MM period close and open - MMPV
4 - FI period open
5 - Parked documents to be posted - FBV0, MIRO
6 - Reposting of Inter Office CC - KB61
7 - Bank Reconciliation
8 - Update Section Code where missing - J1INPP
9 - Maintain GRIR clearing - F.13
10 - Provision for current month - FB50
11 - Depreciation entry - FB50
12 - Exchange rate - To be Updated
13 - Revaluation of foreign currency open items - F.05
14 - Recognition of Inventory at Bonded warehouse - FB50
15 - Maintain Statistical Key Figures - KB31N/KP46
16 - Variance Calculation of Process Orders - KKS1
17 - Settlement of variances - CO88
18 - Assessment cycles - Aux/WH CC to Main CC - KSU5
19 - Assessment cycles - Functional CC to SBU CC - KSU5
20 - Assessment cycles - SBU CC to COPA - KEU5
21 - Profit Center Reposting - 9KE0
22 - Balance Sheet Adjustment calculation - F.5D
23 - Transfer Profit Center to AR & AP - 1KEK
24 - Transfer Inventory to PCA - 1KEH
25 - Assessment Cycle - Dummy PC to SBU PC - 3KE5
26 - Check for u201CDelivery made, not Invoicedu201D - VF03
27 - Match GL and PCA - KE5T
28 - Match PCA and PA
29 - Top Down Distribution in COPA - KE28
30 - Reclassification of GL balances
31 - Balance Carry forward (Year End Only) - F.16
32 - PCA Balance Carry forward (Year End Only) - 2KES
33 - Transfer to FI - 1KE8
Regards,
JA

Getting error while Year end closing in asset accounting for the year ...

Hi,
i am getting error while doing Year end closing in asset accounting for the year 2004. It is giving few assets and saying that "Depreciation not posted completely"
Can any body help in this reagards.
With regards,

Dear Shree,
Do u have the list of all such assets for which no depreciation has been posted. If yes, then go to AFAB, upload the list all these assets & then select the radio button as 'repeat'.
This will post you depreciation for all the assets. then close the year.
regards,
Ajay

KOCO -( Budget Carryforward) & KOCF ( commitment carry forward ) report

Hi
Can some one explain me how to be sure that some one has successfully run two t-codes KOCO -( Budget Carryforward) & KOCF ( commitment carry forward ). I want to make sure that Budget and Commitment carry forward has taken place.Is there any report which I can run.This situation is due to a person left the organization suddenly and I am not sure he has run it.In any case if I run it again what will happen ?
Thanks in advance
Satya

Hi Abhinay,
Thanks for the answer.
When you say they have to perform year end activities like checking PO and PR, what actually they are doing? Do they just need to check whether those PO or PR are required (if not, close them) or they need to do something more? . As far as I know, no steps like checking PO and PR are required here. So I am wondering whether we have missed anything or not. Can you give me some details about that step?
Also, if we are using only Total value for the budget, not annual value, I don't need to do the budget carry forward closing step. In this case, do I need to do the commitment carryforward step?
Thanks,
Ting

Issue in year end closing

Hi
I have an issue in year end closing. What would be effect if i do not clear the open items in GR/IR Account as part of year end acitivity. The balance in my GR/IR Account is zero as of my balance sheet date.
What would happen if i run the balance carry forward program?
Regards
Sanil Bhandari

This program will reclassify the entries for the Balance sheet reporting. Since your balance is zero there should not be any impact on the reporting side. Whether you run this program or not it will not have any impact on the balance carry forward program. Since these entries will get reversed at the beginning of the next period in any case.
The config setting will be in OBYP
The following config document may help you in better understanding.
Define Adjustment Accounts for GR/IR Clearing
The goods receipt/invoice receipt (GR/IR) clearing account is posted to whenever you receive goods that have not been invoiced yet or whenever you receive invoices for goods that have not been delivered yet.
In this activity you define the numbers of the adjustment and target accounts for the automatic postings for the GR/IR clearing account.
Transfer postings have to be made at the balance sheet date to reflect the goods invoiced but not delivered and the goods delivered but not invoiced. The program that analyzes the GR/IR clearing account adjustments this account by posting any outstanding amounts to an adjustment account. It makes the offsetting entry to the account for goods delivered but not invoiced or to the account for goods invoiced but not delivered (target account).
Edited by: Sivakumar Gopalakrishnan on Jan 15, 2008 4:11 PM

GL balances differences between Year end closing and opening balances

Hi friends,
One GL account balances showing differences between year end closing & year opening balances.
Example: 2006 closing balance is 250000 $
2007 opening balance is 150000 $
difference is 100000 $ . why should coming like this. already completed balances carryforward (F.16) in 2006 & 2007 year.
any programe for this solution ?
One more point is just 2 days back i posted 2 entries for 2006 year equal to 100000 $ . after this entries shall we need go for F.16 (carry forwarded balances).
please do the needful. It is very urgant issue.
Raj

HI,
There shouldn't be any more postings to a GL Account once Balance carry forward has been executed.
If postings have been made then you should execute the Balance carry forward again, otherwise you will see difference in opening and closing GL balance (as mentioned by you).
Regards

FI Year End Closing

hi...
pls tell me t.code for following List for FI Year End Closing
1 Execute Report for InterCompany Activity & Journal Entries
2 Open posting period for next yr
3 Run Business Area's Assignment report.
4 Review list of recurring journal entries
5 Execute Recurring Entries for A/R, A/P, G/L
6 Process Parked A/R, A/P, G/L accounting documents
7 Final Cutoff for the Maintenance of Fixed Asset- Add Transfer and Retire
8 Run Depreciation in Test Run and post
9 Verify Display Log for Depreciation Test Run
10 Capitalize AUC Assets if needed
11 Enter Payroll Data to SAP
12 Verify Depreciation Balances with GL balances
13 Post Depreciation
14 Execute Asset History Report, and retire assets if needed
15 Adjust specific depreciation areas if necessary
16 Reconcile AM subledger with GL
17 Check Bank Data
18 Review AR Open Items
19 Review AP Open Items
20 Execute Pending Invoices
21 Clear Open Item for GRIR, freight
22 Reconciliation of Financial Documents and transactional figures
23 Open new CO Posting Period
24 Compare current (cost estimates) with last current price (Moving Avg)
25 Update current cost price to material master price field.
26 Process Freight charges, Match SD freight to actual
27 Review Internal Order Postings
28 Settle All Orders
29 Verify All Post Goods Issue have been Invoiced (Billing Due List)
30 Review SD Billng Doc from prior mth that have not yet been released to accounting
31 Reconciliation of MM movements in Transit Intra-SAP to NonSAP
32 Reconcile PI Inventory with SAP
33 Perform Manual Adjustment if needed
34 Verify balance of the GR/IR account
35 Post Accruals and Deferrals
36 Clearing of Cancelled Documents
37 Check Profitability Segment Adjustment
38 Aging Report-Reconcile GL balances with subledger balances AP
39 Check the check run numbers
40 Bank reconciliation Data
41 Enter Tax Journal Entry
42 Reconcile GL balances with subledger balances AR/MM/AP
43 Display Balance Sheet Adjustments
44 Post Balance Sheet Adjustments
45 Post Foreign Currency Valuation (foreign exchange)
46 Check generic cost centers for posting with wrong accounts
47 Correct wrong postings on generic cost centers
48 Check Validation dates for Cost Centers, Cost Elements, CO area
49 Check COGI--for both month end and year end
50 Doubtful receiviables
51 Verify In-transist Inventory
52 Reconcile PA to G/L
53 Post Cost Centre Assessments and Distributions
54 Run CO-FI Reconciliation to balance
55 Run BW reports P&L and Balance Sheet
56 Maintain CO yr variant
57 Fiscal Yr Balance carryforward AP/AR/AM
58 Fiscal Yr Balance carryforward CO
59 Fiscal Yr balance carryforward FI
60 Fiscal Yr balance carryforward PCA
61 Set Document number ranges - FI - new year
62 Set Document number ranges AP/AR - new year
63 Generate Financial statement Reports
64 Change Fiscal Year For Assets
65 Year end Closing-- Asset Accounting--final for year end
66 Close CO Posting Period
67 Close Prior A/R Posting Period
68 Close Prior A/P Posting Period
69 Close Prior MM Posting Period
70 Reverse accruals and deferrals for the new month
71 Reconciliation of Financial Documents from old fiscal year and new fiscal year
72 Load Balances, Budget Data for Cost centers, sales
73 Update Retained Earning Account , balance carry fwd
Thanks & Regards
Rekha Sharma

Hi,
Please check this
1 Execute Report for Inter Company Activity & Journal Entries
2 Open posting period for next yr (T.Code: OB52)
3 Run Business Areau2019s Assignment report. (T.Code: F.50)
4 Review list of recurring journal entries (T.Code: FBD3)
5 Execute Recurring Entries for A/R, A/P, G/L (T. Code: F.14)
6 Process Parked A/R, A/P, G/L accounting documents (T.Code: FBV0)
7 Final Cutoff for the Maintenance of Fixed Asset- Add Transfer and Retire (T.Code: ABUMN)
8 Run Depreciation in Test Run and post (T.Code: AFAB)
9 Verify Display Log for Depreciation Test Run (T.Code: AFBP)
10 Capitalize AUC Assets if needed (T.Code: AIAB, AIBU)
11 Enter Payroll Data to SAP (T.Code: CAT2)
12 Verify Depreciation Balances with GL balances ( T.Code: ABST2)
13 Post Depreciation (T.Code: AFAB)
14 Execute Asset History Report, and retire assets if needed (T.Code: S_ALR_87011963, ABAVN)
15 Adjust specific depreciation areas if necessary (T.Code: ABCO)
16 Reconcile AM sub ledger with GL (T.Code: ABST2)
17 Check Bank Data (T.Code: S_P99_41000212)
18 Review AR Open Items (T.Code: FBL5N)
19 Review AP Open Items (FBL1N)
20 Execute Pending Invoices(T.Code: MRBP)
21 Clear Open Item for GRIR, freight (T.Code: F.13)
22 Reconciliation of Financial Documents and transactional figures (F.03)
23 Open new CO Posting Period: (T.Code: OKP1)
24 Compare current (cost estimates) with last current price (Moving Avg) ( T.Code: OKBH)
25 Update current cost price to material master price field (T.Code: CK11N, CK24)
26 Process Freight charges, Match SD freight to actual (T.Code: V-31)
27 Review Internal Order Postings(T.Code: OKSA)
28 Settle All Orders (T.Code: KO88)
29 Verify All Post Goods Issue have been Invoiced (Billing Due List) (T.Code: VF04)
30 Review SD Billing Doc from prior month that have not yet been released to accounting (T.Code : F.2D)
31 Reconciliation of MM movements in Transit Intra-SAP to Non SAP
32 Reconcile PI Inventory with SAP (T.Code: MI07)
33 Perform Manual Adjustment if needed (T.Code: F-02, FB50)
34 Verify balance of the GR/IR account ( T.Code: MB5S)
35 Post Accruals and Deferrals (T.Code: FBS1)
36 Clearing of Cancelled Documents (T.Code: F-03, F-32, F-44)
37 Check Profitability Segment Adjustment (T.Code: KISR)
38 Aging Report-Reconcile GL balances with sub ledger balances AP ( T.code: FBL1N, FBL5N, FBL3N)
39 Check the check run numbers (T.Code: FCH1, FCHI)
40 Bank reconciliation Data (T.Code: FF67 & FEBA)
41 Enter Tax Journal Entry (T.Code: FB41)
42 Reconcile GL balances with sub ledger balances AR/MM/AP ( T.Code: F.03)
43 Display Balance Sheet Adjustments (T.Code: F.5F)
44 Post Balance Sheet Adjustments (T.Code: F.5E)
45 Post Foreign Currency Valuation (foreign exchange) (T.Code: F.05)
46 Check generic cost centers for posting with wrong accounts
47 Correct wrong postings on generic cost centers
48 Check Validation dates for Cost Centers, Cost Elements, CO area (T.Code: GGB0)
49 Check COGIu2013for both month end and year end
50 Doubtful receivables (T.Code : F104)
51 Verify In-transit Inventory
52 Reconcile PA to G/L (T.Code: KE5U)
53 Post Cost Center Assessments and Distributions (T.Code: KSU5 & KSV5)
54 Run CO-FI Reconciliation to balance (T.Code: KALC)
55 Run BW reports P&L and Balance Sheet
56 Maintain CO yr variant (T.Code: KCRQ)
57 Fiscal Yr Balance carry forward AP/AR/AM (T.Code: F.07,
58 Fiscal Yr Balance carry forward CO (T.Code: CXS1)
59 Fiscal Yr balance carry forward FI ( T.Code: F.16)
60 Fiscal Yr balance carry forward PCA (T.Code: 2KES)
61 Set Document number ranges - FI - new year (T.Code: OBH2, OBA7)
62 Set Document number ranges AP/AR - new year (OBA7)
63 Generate Financial statement Reports ( T.Code:OB58) OR (T.Code: FSE2)
64 Change Fiscal Year For Assets (T.Code: AJRW)
65 Year end Closingu2013 Asset Accountingu2013final for year end (T.Code: AJAB)
66 Close CO Posting Period : (T.Code: OKP1)
67 Close Prior A/R Posting Period ( T.Code: OB52)
68 Close Prior A/P Posting Period (T.Code: OB52)
69 Close Prior MM Posting Period (T.Code: OMSY)
70 Reverse accruals and deferrals for the new month (T.Code: F.81)
71 Reconciliation of Financial Documents from old fiscal year and new fiscal year ( T.Code: FNSL)
72 Load Balances, Budget Data for Cost centers, sales
73 Update Retained Earning Account , balance carry fwd (T.Code: F.16)
Regards,

Error in Asset Value carry forward to next year

As a regular periodic process of Month/Year closing activities in SAP, Asset Year 2015 was opened and then closes the year 2014 and carried forward the Asset values to the year 2015. But unfortunately some of the Asset value had not been transferred to the year 2015. As a result, Depreciation had not been charged for those Asset for the year 2015. Need to transfer the Asset value to the current year immediately. Can any one help me regarding the problem ? The APC Start value is showing in the year 2014 but its not showing in 2015.
The Closing value of Current APC of year 2014 does not match with the Opening value of the APC Start, so what should be the possible reasons for that ?

Hi Erika,
I did that on last January 2015. First i use the T-code: AJRW for the Fiscal Year Change and then T-code: AJAB - for Year end-closing Asset Accounting as i did that for last 4 years. Though there was as error message indicating error in depreciation calculation, our consultant assured me that that will not create any problem. The Error was like below:
600981 0 Secretariat Table 2014 Error in dep. calculation

Queries regarding Year End Closing Activity

Hi Experts/Moderator,
I need solution to my queries regarding Year End Closing Activity?
1. How can we post adjustment entries to GL/AR/AP/BANK/ASSET accounts in the previous FYu20192008 in Apr/May/Jun/Julyu20192009 using Special Posting Periods, if already balances are carrying forwarded to next FY 2009? What effects on the Opening Balances already carry forwarded?
2. Can we run the Asset Depreciation for the previous FY 2008 in Apr/May/Jun/Julyu20192009 using Special Posting Periods, if already balances are carrying forwarded to next FY 2009? What effects on the Opening Balances already carry forwarded?
Thanks & Regards
Chandra

Hi,
You can carryforward the balance of GL, AP & AR. System is automatic updated the balance in current fiscal year if you pass the adjustment entries in previous fiscal year 2008 using special period. You can also run the deperciation.
Regards,
Pankaj

FI year End closing activities Sequence

Hi Gurus
we are running sap ecc6 , completed one 1.5 year , successfully closed pervious year FICO, Assets. this time FI guy left . i have some knowledge of it.
apart from small small fi year end closing\ precautionary activites \ ( normally found 50 to 73 steps) . i want to confirm the activities sequence.
for example :
On Day 1 of new fiscal year , we will have to post the document in new fiscal year , and in first period. means New fiscal , first period should be open. Also document number ranges should be open .
then after reconciling \ completing previous year. balannces should be carry forwarding to the next year.
and then closing previous fiscal year .
1) Next financial year Period Opening ( ob52)
2) Asset accounting fiscal period. ( what should be the complete sequence regarding assets)
3) Copy Number ranges ( AP, AR, GL, etc)
4) Carry forworward balances
5) closing pervious year.
thanks \ thomas

Hi Thomas,
Some of year end closing steps are mentioned below.
1)Open and close posting periods in FIu2026.OB52
2)Close MM periodu2026u2026u2026u2026..MMPV
3) Collect and post all outstanding vendor Invoicesu2026u2026F-43
4) Collect and post all customer Invoicesu2026u2026F-22
5) Post accruals/deferrals u2026u2026FBS1
6) Generate Recurring entriesu2026.F.14
7) Run the interest calculationu2026..F.52
8) Maintaining Exchange Rates u2026u2026 OB08
9) Run the foreign currency valuationu2026.F.05
10) Run depreciation runu2026u2026..AFAB
11) GR/IR clearing account u2026.F.13
12) Complete Bank Reconciliationu2026u2026u2026FF67
Other few activities given below:
FI
1. Depreciation Run - AFAB
2. F.5D Balance sheet adjustment calculation
3. F.5E Balance sheet adjustment Post
4. F.05 Foreigh Currency Valuation.
CO
1. CO43 Overhead calculation
2. KKAO - WIP Calculation
3. KKS1 - Variance Calculation
4. CO88 u2013 Settlement.
Might help you.
Thanks and Regards,
Arun Mulgund

Year end closing in Asset Accounting

Hi, I have an urgent problem with the above subject. I ran transaction AJAB and got the error message AU075: "Asset balance sheet values not completely posted". I ran ASKB but got the message "Company Code xxxx allows enhanced periodic postings". I then ran ASKBN and got error saying certain posting periods were not open. Incidentally, the assets that the error messages were appearing against are assets that have been retired during the year. I opened the posting periods via OB52. I re-ran ASKBN and had no errors. However, no G/L accounts were updated and I still get error message AU075!
As this is the first step in carrying forward the year-end balances I cannot action F.16 and F.07 to carry G/L, AR and AP balances. My year end is March and I must produce a sap balance sheet for April asap but cannot until the above problem is resolved.
Help would be appreciated very much!
Thanks

Hi,
Run the tcode ASKB without clicking the test run although it will not update any GL.
Second run the tcode AUVA and check whether any asset is incomplete.
then run AJAB for period closing.
Regards,
Meenakshi

Commitment Carry Forward in the year end closing!

Similar Messages

Maybe you are looking for