Commitment is not updated after PO creation !
After creation of a PO referenced to a PR created from MD51 on a WBS, the commitment in "S_ALR_87013533 - Plan/Actual/Commitment/Rem.Plan/Assigned " is not updated although i believe that all configs are done. any one faced this prob.?
There is this note (47992 - No commitment is displayed in reporting) which explains when Commitments would not be generated. Please check if you case belongs to any of these:
1. For purchase orders/ purchase requisitions for project stock or customer stock with settlement on the project or sales order, no commitment is written in the standard program in general. If you want a commitment being written in these cases as well, apply the corrections from Note 498907
2. If a purchase requisition which is assigned to a WBS element is generated from material requirements planning (MRP), no commitment is generated for the WBS element.
Note also explains how updation of commitment values is controlled:
1. In the year-dependent controlling area control parameters, commitments management must be active (Transaction OKKP).
2. In addition, the G/L account to which the purchase order is assigned, must be created as a cost element at the delivery date.
Regeneration of the commitment afterwards is possible by changing the purchasing document (for example, the item text).
Regards
Sreenivas
Similar Messages
-
Credit Exposure have not updated after SO creation
Hi Expert,
As per business requirement, we want to maintained credit check during consignment process. Here we have unable to stop Consignment Fill-up order with excess credit limit.
EX: In FD32, Customer Credit Limit: 100000
If we create first Consignment Fill-up order with amount 90000 and create second order with amount 15000 than system is allowing to create SO and in FD32, Credit exposure amount not updated in both cases.
I have also active credit limit with item category. Please find the our current setting in VOV8 and OVA8.
Please suggest how can we configure this process.
Thanks in advance.
Regards,
Shatrughan SinghEven though you activated the credit active to KBN still system will not update those values to FD32.
This is standard behavior of SAP R/3 system, please see the note SAP 492831 which clearly says credit management for consignment works for consignment issue.Not in Consignment fill up.
I am assuming that the reason could be the consignment fill up does not update the open order values to FD32 is
Since the consignment fill up is just dumping the stock at customer location, let us assume if the goods are not sold by the customer to end customer then again we need to get those items back to our ware house so here there is no point of updating the credit values to customer in to FD32
And it is not relevant for billing hence there is no point of talking about credit block
thanks,
Srinu. -
PO item change is not updated after Delivery completion
Dear All,
PO item change is not updated in the PO at the completion of the delivery.for a particular line item. In our QA system, its updated but client is facing an issue with the production system. Pls check the attached screen which I got from QA. There is no such log in the production system. Kindly help me to have a solution for this.
Regards
SujithHi Dev,
After we post the GR for a PO line item, PO history is updated (line) and at the same time that particular change log is available under PO line item. But in production system, said log is not updated after GR is completed fully.
Rgs
Sujith -
Recent files list is not updating after 10.1.13
Recent files list is not updating after 10.1.13 update unless I open the file via the Network in Windows Explorer. If I open a file by accessing the file via a drive listed under Computer, the recent files list does not update. The recent files list updates only if I open the file from the same drive listed under Network.
Hi Bert ,
You might want to report for a possible bug.Please refer to the following link for the same.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
Regards
Sukrit Dhingra -
Picked Quantity is not updated After delivery in Vl03n
After delivey in Order (VA03), the picked quantity is not updated Properly(VL03n). It is coming as Zero.
Is it any configurations needed or writng any code.
For that I put Break point in FMs like SD_DELIVERY_UPDATE_PICKING in program RVADEK01.
But it is not stopping the Program.
Please give any possible solution.Hi Vinod,
Thank u For ur Answer.
Just my Fuctional Consultant given Procedure.
How to test the picking list. The problem is after Deliver the Order quantity in VA03 and after saving, this will creates One Out Bound delivery.
Now We r checking VL03n. Now it is updating the Picked Quantity Correctly, For that We r using the Standard Print program: RVADEK01, Form: RVPICSKSIN.
Output Type: EK00, Application: V4.
Here My problem is We copied the Form and print Program and modified according to our requirement and they configured in Nace with our own Output type. We haven't chenged the updated Functionality and Not even Standard program. We wrote some include program for getting new values in scripts.
Now the picked quantity is not updated after picking in VL03n. -
Node.length not updating after removeInstance
I have a dynamic form where line items can be added dynamically. I also have a button to remove the last line item. The code worked fine until Acrobat 7.0.7 now I get an error that the index in the removeInstance method is invalid. After doing some debugging it appears that the node.length is not updating after a removal of an instance.
For example, the form starts with 1 line item. (node.length = 2, index = 0)
I can successfully add a new line item (node.length = 3, index = 1)
I then can add another line item (node.length = 4, index = 2)
I can successfully delete the last line item (index = 2) using the following code:
var nodelength = form1.items.nodes.length;
//need to know which instance is being removed
if(nodelength>2){
items.item.instanceManager.removeInstance(nodelength-2);
else if(nodelength==2){
form1.items.items.Status.rawValue = "";
form1.items.items.guestName.rawValue = "";
form1.items.items.Payment.rawValue = "";
form1.items.items.Entree.rawValue = "";
At this point the items.node.length property should be 3 but it remains 4 thus causing an error when running the above script again because there is no corresponding item to remove.
This appears to be a bug - but if I am doing something wrong please let me know. If it is a bug, please fix it.This sounds like a bug I recently encountered. If it's the same thing then calling xfa.form.remerge() after the removeInstance() should correct the problem. If it is the same issue, it's already been logged in order to get it fixed.
Chris
Adobe Enterprise Developer Support -
Thumbnails not updating after external editing.
I noticed the thumbnails are not updating after I use an external editor. When I bring the images full screen are they are representing correctly, but when I leave full screen the thumbnail still is not the latest image.
I tried the update preview and Aperture said it they are updated, so I did an option and update preview and that corrected them, but this should be happening automatically.
I did try restarting Aperture before the doing the "option - update preview" and that had no effect.Do you mean it is suppose to be fixed in 3.0.1? Or do I have to wait until a 3.1 comes out.
I am using 3.0.1 now and that is where I am seeing the issue. -
Ipad mini apps not updating after ios8.2 update
apps not updating after software update ios8.2 on ipaD MINI WITH RETINA SCREEN
Turn off any auto-update, if it is on, then tap any of the "circle icons" showing that a download is in progress, in order to stop the download. Then go to the Settings and reset the Network Settings. After the iPad starts back up, then check to make sure no apps are currently in progress of downloading. If any are, stop them again, and reset the network settings again. When it starts up again, none should be in the process of downloading. Then from that point forward, only download manually and never more than two at a time. If it is more than 100 MB, then do only one at a time. If any gets stuck at that point, then stop the download and reset the Network settings.
That should take care of you for now. We'll see what another update brings ... IOS 8.2 (which might be the next one). -
Database history growth not updating after EHP upgrade
Hi All,
We are using SAP ECC 6.0 (731 - SP09 ) & DB2 Fix pack 5 version.Database history growth not updating after EHP upgrade. I have check collector job running fin and DB tab > Configuration > Data Collection Framework > Configuration Collector are in green status.
Please help me to resolve this issue.
Regards,
MKHi MK,
You can try few things:
1. Check to collector standard job like SAP_COLLECTOR_FOR_PERFMONITOR should be running succesfully.
2.If you can check to data collector collection interval column , you will find it to be Not Schedule.
Try with Repair all collector.
To make it work properly you have to perform
Data Collection Full
Data Collection Incremental
Hope it helps
BR Vaibhav -
Revision: 5489
Author: [email protected]
Date: 2009-03-23 10:04:25 -0700 (Mon, 23 Mar 2009)
Log Message:
i11 branch: Fix SDK-20148 Group bounds do not update after moving a child UIComponent
Fix: add a method in GroupBase that's called whenever child x,y changes in UIComponent. GroupBase invalidates layout when autoLayout is true.
QE Notes: None
Doc Notes: None
Bugs: SDK-20148
Reviewer: Deepa
tests: checkintests, mustella
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-20148
http://bugs.adobe.com/jira/browse/SDK-20148
Modified Paths:
flex/sdk/branches/i11/frameworks/projects/flex4/src/mx/components/baseClasses/GroupBase.a s
flex/sdk/branches/i11/frameworks/projects/framework/src/mx/core/UIComponent.asFYI - This regression has been filed here: http://bugs.adobe.com/jira/browse/SDK-31989
-
Regisrty keys HKEY_CLASSES_ROOT\Photoshop.Application\CLSID and \CurVer are not updated after upgrading to cc 2014
this cause to "cant create ActiveX object" error in VB Scripts
win7 x64, ps cc 2014 x64
any ideas? thnksAll I can so is show you what I see in that area of my Windows 7 registry but I have CS2, CS6 32, CS6 64, CC 32, CC 64 and CC 2014 64 installed. 6 versions yet there seem to be 9 Photoshop Application dot keys.
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Photoshop.Application]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application\CLSID]
@="{702fe898-3f8a-483f-8ca6-3bad95fa2489}"
[HKEY_CLASSES_ROOT\Photoshop.Application\CurVer]
@="Photoshop.Application.80"
[HKEY_CLASSES_ROOT\Photoshop.Application.60]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.60\CLSID]
@="{99aea70e-4d13-44bf-a878-33345cbfcbc8}"
[HKEY_CLASSES_ROOT\Photoshop.Application.60.1]
@="Photoshop CS6 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.60.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"
[HKEY_CLASSES_ROOT\Photoshop.Application.70]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.70\CLSID]
@="{951ec38c-3de6-4bb8-8246-adf182e6421d}"
[HKEY_CLASSES_ROOT\Photoshop.Application.70.1]
@="Photoshop CC Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.70.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"
[HKEY_CLASSES_ROOT\Photoshop.Application.80]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.80\CLSID]
@="{702fe898-3f8a-483f-8ca6-3bad95fa2489}"
[HKEY_CLASSES_ROOT\Photoshop.Application.80.1]
@="Photoshop CC 2014 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.80.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"
[HKEY_CLASSES_ROOT\Photoshop.Application.9]
@="Photoshop CS2 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.9\CLSID]
@="{16aa0b9e-79ac-43b5-86ca-ab961fbeed5f}"
[HKEY_CLASSES_ROOT\Photoshop.Application.9.1]
@="Photoshop CS2 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.9.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}" -
Infostructure S502 not updated after certain date
There is an infostructure S502. It is not updated after a certain date.
It should be updated after saving in C011N.
This problem seems to have propped up after upgrade to ECC 6.0. Before that it was working fine.I have tried a lot but still S502 is not properly updated. Basically the field for date i.e SPTAG is empty. Due to this when we try to select from MCRQ based on dates, no data is selected.
Is it because of some setting in MC23? -
Average Active Sessions graph not updated after restart
Hi,
I just wanted to ask - I have restarted a database (11.1.0.7) with GC 11.1.0.1 but after the restart of the db the graphs on a performance tab are not updated. It means that the doesn't refresh and doesn't show actual data...
I checked jobs on the target database and GC repository but nothing is broken. Info on Home tab of the target DB is actual but not the graphs..
I also tried to clearstate and restart the agent but no change..
Any idea?
ThanksThis is a bug and can be solved by applying
Patch 10307099: PERFORMANCE CHARTS DO NOT UPDATE AFTER DATABASE IS RESTARTED
This patch is included in the july 2011 PSU: Grid Control Patch Set Update 11.1.0.1.4 for the Oracle Management Service, see MOS doc ID 1334286.1
Eric -
Why do Apps not update after installing iOS6? They just hang there!
WHy do apps not update after installing iOS6?
Each time? every day? Just plain crazy! Updates happen automatically on your mac....why not the same thing on ipad/iphone?
If the app was purchased on my phone with my account, surely they do not need to "verify" my credentials each time. If my phone was stolen and someone purchased a $20 app surely my $300 phone is more important?
They need to come up with e better solution...when we all have hundred or thousands of apps on our devices what then? -
I have a problem with the iPhoto not updating after the hard drive recall.
The iPhoto with not update after doing the Hard Drive Recall. It keeps saying I don't have the right ID. I have tried resetting all my passwords and no change. What do I need to do to fix this problem?
Which OS version did you have when you acquired iPhoto and was it on a DVD (iLife) or did you download it from the app store initially?
And, last question, did you skip Mavericks? Mavericks owners were given the opportunity to update iPhoto to an app store version free of charge; if you skipped it and do not have a backup or the installer DVD or purchased a new computer recently, then you'll need to purchase it.
Maybe you are looking for
-
Camera Import Plugin XDCAM - not working for me!
I recently discovered Sony's "Camera Import Plug-In for Apple Final Cut Pro X (FCPX)." Sounds really useful, so I went for it. Downloaded it in seconds, installed it (and got the "Installation Successful" confirmation). Launched FCP X - nothing! Usin
-
Hi there Does anyone have the manual e-mail setup of a nokia 6233.
-
IPhoto in my doc will not open up
and if I try to open it thru the Application file in the finder I get an error message Code - 600. How can I fix this? I've never had a problem for years. I have iPhoto version 2.0.1 Swissi iMac Mac OS X (10.3.9)
-
Can't load message picture when forwarding
Sometimes when someone sends me an attachment such as a picture or video I can open it but then when I go to forward it on the forward page I see a ? and also something that looks like a lego block. This also happens when I sometimes get pictures. Th
-
my code: hazard1.addEventListener(MouseEvent.MOUSE_DOWN, pickUp); hazard1.addEventListener(MouseEvent.MOUSE_UP, dropIt); function pickUp(event:MouseEvent):void { event.target.startDrag(true); function dropIt(event:MouseEvent):void { event.target.stop