Committment is still showing for closed purchase order

Hello Team
We have a purchase order with cost center for last financial year, We did the GRN and MIRO. Also we did the payment to vendor, However, the committment is still showing.
Kindly advise the possible reasons for the same
Regards
Anil

HI
Refer note Note 158892 - Commitment for purchase order without account assignment
152571 - Composite SAP note: Missing or incorrect commitments
Execute Program RKANBU01 and check if it helps
BR,Ajay M

Similar Messages

Table to show thw invoice for a purchase order

In which table we can see the invoice for a purchase order?Or in which t code.

Hi,
Go to table EKBE in SE16/ SE16N and give the PO number and value "2 (Invoice receipt)" in the filed "Transaction/event type, purchase order history"
Regards,
SDNer

Report for Open Purchase Orders

how to develop a report which lists all open purchase orders for given period & plant ? plz idoint want coding .. but give me guidlines & suggestions to develop my own plz tell where could i nstart & end for this report help me sdn
Edited by: Alvaro Tejada Galindo on Jun 5, 2008 11:32 AM

Either you can use ME2N with selection parameter WE101 & Scope of list BEST
or
Go to SE16
Use Table EKPO
Use Filed name ELIKZ
If you give X list of all the delivery completed items.
If you leave blank list of all Open PO items will display.
Report showing the open Purchase orders
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Jun 5, 2008 11:32 AM

Purchasing Accruals on Closed Purchase Orders

I am having an issue with Purchasing accruals being performed on a closed purchase order. The accrual does not appear in the Uninvoiced Transactions Register, but is accrued in the Purchasing journal entry nonetheless. The purchase order is "closed". I am trying to figure out why the amount is being accrued and how to stop the accrual. Anyone have any ideas? Is this a bug or should I try to "Finally Close" the PO?
I also noticed that when this PO accrued in the first month, there were two accrual lines for the purchase order. One had a correct accrual of $67.20 and then there was a second line of $14.70 that was accrued for the PO. The $14.70 is the amount that has been continuing to accrue even though the PO has been "closed".
This is in version 11.5.
Thank you,
Erik

Here are the details of the PO:
Quantity = 1
Qty Rec'd = 1
Qty Billed = 1
Qty Cancelled = 1
Cancelled (flag) = No flag
Hi Erik,
interesting case ! Please note above. You have mentioned "Qty Cancelled = 1", is it a typo?
Assuming that it is a typo error, I don't think finally closing it will solve the problem.
Apart from quantity difference in received vs. billing there may be other cases like incorrect PO or invoice unit price, supplier billing discrepancies (since you have mentioned billing was in installments).
I'll suggest the following checks first before taking any action. Please test in a cloned instance first
- Run "Accrual Reconciliation Report" / "Accrual Rebuild Reconciliation Report" and check what is coming ... do you see the problematic entry
- Check whether there are any other reasons apart from quantity received vs. invoiced mismatch
- Try Accrual Write-Off option in Purchasing to clear that entry (refer PO
- Pass a manual journal entry in GL
For the last 2 steps consult with finance guys.
You can use Accrual Write Off Report as reference for manual journal entry in GL.
Once you are satisfied with the results, apply the solution in production with approval from finance.
Another option could be to use a "dummy" invoice to match the remaining amount.
Please let me know the results.
Good luck!
Thanks
Supro

Good receipt problem for subcontracting purchase order

Good receipt problem for subcontracting purchase order
with account assignment type E.
After update to ECC 6.0. Do good receipt for subcontracting purchase order with account assigment 'E'.The system show the error message(KI235)----Two cost elements (Change in Stock (Subcontracting)&Outside processed fee) haven't CO account assignment.but the field status for sale order is option entry , when I default cost center for the cost element in OKB9.the system post the material document and generate the following accounting document.
Doc.Type : WE ( Goods receipt ) Normal document
Doc. Number    5000056065       Company code    1000         Fiscal year     2007
Doc. date      2007.12.04       Posting date    2007.12.04   Period          12
Calculate Tax
Doc.currency   HKD
tm PK Account    Account short text   Tx Cost Ctr   SaleOrder               Amount
1 89 13500000   Stock-Work in proces                   1007823 10             274.4
2 96 21210010   GR/IR Clearing                             1007823 10             205
3 91 41010102   Chg in Stock(Subcon)    10901099 1007823 10            274.4
4 86 41031000   Outside processed fe     10901099 1007823 10            205
5 99 13500000   Stock-Work in proces                    1007823 10            69.4
6 81 41010101   Cost of Prod (Subco)                      1007823 10           69.40
My problem is:
When use MIGO to do good receipt for subcontracting Purchase order, for consumption account((Change in Stock (Subcontracting)-41010102&Outside processed fee--41031000) ,why the system dont recognize the sale order filled as CO account assignment?

Dear fanny chen
Did you get a solution for your open question?
I`m facing the same problem, so any help yould be appreciated.
Regards

GR Based IV tick for Import Purchase Order

Hello Friends
Whats the significance of keeping GR based IV check box as unchecked for import purchase order.I am selecting this indicator and still i am able to do the process as follows
1. ME21n 2. MIRO (BOE capturing) 3. MIGO 4. Post Excise invoice 4. MIRO (Material Vendor)
Still could not understand why this indicator is suggested to keep as unchecked for import purchase order processing.
Please clarify.
Regards
Vivek sharma

Hi
For import POs , it is required that the GRbased Inv ver key removed, as we need to pay the amount due to the customs. We are yet to receive the material in our Goodown i.e goods receipt is yet to be done but payment to Customs has to be made only then material GR can be carried out. You have to enter manula values(amounts) for this to be processed. What you said reg the MIRO rpocessing evenefore Material receipt, this is possible , duirng MIRO you need to anter the quanity and the correspondingamount to be processed. While if you have GRbased Inv.verification then you need not enter material quanity or value manually which is automatic.
Regards

Restricting ouput type for a purchase order

Hi,
I don't want an ouput type to be selected for a purchase order ( specific to vendor and plant combination ) by default.
But, in my case a default message 'print output' is displayed. Please help how this can be disabled.
Thanks
Sravan

Hope you know good etiquette in replying to the messages
I don't know from where etiquette came into picture for this. For sure I haven't stated anything which is personal or derogatory in nature. I have simply stated the facts, which if you re-read again would become clear.
Anyway if you still think that anything I have said has offended you or this forum, do let me know what is that you found which is out-of-context & I would be only glad to correct myself.

Set the final invoice flag for a purchase order

I want to know how to set the final invoice flag for a purchase order.
I tried BAPI_PO_CHANGE but it is giving me error.
Help me.

Hi,
I think ur BW report shows the cleared Invoice no. The second invoice no. might not have been extracted to BW system. Check your order no. in Cube whether it has two invoice nos.
Regards,
Suman

QC51:No certificate is required for the purchase order item

Dear all.
I want to create an certificate Receipt In the T-CODE QC51.After input the purchase order and item and press return,the SAP show an error message:
No certificate is required for the purchase order item.
Message no. QC508
My question was where to control the purchase order item to require certificate or not?
Regard
Yoda

Hi
For this you have to maintain Certificate req in Material master.
MM01>Enter your material->Quality view-->Tick on QM procurement->Certificate require-Mension kind of certificate req.
like
E21     Cert. of conformity "2.1" EN 10204
E22     Test certif. "2.2"         EN 10204
E23     Works test certif. "2.3"   EN 10204
E31A     Insp. certificate "3.1.A" EN 10204
E31B     Insp. certificate "3.1.B" EN 10204
E31C     Insp. certificate "3.1.C" EN 10204
E32     Inspection report "3.2"    EN 10204
Q001     Conformance Report
Q002     Plating Certificate
Q003     Test Report
Q004     Certificate through Web
Q005     Chemical / Physical Test report + QC
etc.....
Customizing for this can be done in
SPRO->Quality Management->QM in Logistics--->Define Keys for Certificate Processing.
This will ask you during MIGO or during UD/confirmation possible thro' QC21
Regards
Sujit S Gujar

I've downloaded OS X Mountain Lion from the App store , it still shows download on purchases . I've downloaded multiple time and still shows download.

I've downloaded OS X Mountain Lion from the App store , it still shows download on purchases . I've downloaded multiple times and still shows download in App store purchasesSoftware is showing OS X 10.8.3 .

Is this what you see?
That Download button is telling you it is available for downloading. Since you have paid for it and you are entitled to multiple downloads, that button is correct.

Data Migration for Open Purchase Order

Hi, All,
Is there anyone know how to Count the volume for Open Purchase Order. What's the normal strategy for the Data Migration and Cut-over stage?
My client want to know how many Open Purchase Order in the legacy system and then determine manual or automatic data migration. If manual, how to do? If automatic, how to do? Because all materials and vendors, plants are different number. How to track? How to find out to match between new and old?
Thank you very much

JC,
Sounds a bit early to be making decisions about the realization phase. It doesn't sound like you have finished the Blueprinting phase yet, much less the testing phase.
Anyhow, in my experience I typically use LSMW (Legacy system migration workbench) to load MM master data (material masters), Inventory (WIP, RM, FG, etc) Purchasing Master data (Vendors, Purchase Info Records, Source Lists, Quota Arrangements), and Purchasing transactional documents (POs, PurReqs, Scheduling Agreements, etc). Depending on the complexity and volume of data, it may be necessary to write custom programs to load the data. You will find this out during your requirements gathering.
It is uncommon but possible to load all of these data manually. I have never run across a client that wants to pay a consultant's hourly rate to sit at a terminal to peck away loading master data, so if the client intends to have his own users enter the data manually, the project manager should make provision that there will be qualified TRAINED client employees available for this data entry. I did help with a portion of a conversion once manually; of Sales Credits, but there were only about 30 SD docs to load. I did this the evening before go-live day, while I was waiting for some of my LSMW projects to complete in the background.
A good opportunity to 'practice' your data loads is right after you have completed your development and customization, and you have gotten the approval from the client to proceed from the pilot build to the full test environment. Once you have moved your workbench and customization into the client's test environment, but before integration testing, you can mass load all, or a substantial portion of your conversion data into the qual system. You can treat it like a dry run for go-live, and fine tune your processes, as well as your LSMW projects.
Yes, it is good practice to generate comparisons between legacy and SAP even if the client doesn't ask for it. For Purchase orders on the SAP side, you could use any of the standard SAP Purchasing reports, such as ME2W, ME2M, ME2C, ME2L, ME2N. If these reports do not meet the requirements of the client, you could write a query to display the loaded data, or have an ABAPer write a custom report.
You didn't ask, but you should also do comparisons of ALL loaded data - including master data.
It sounds like you are implying that the client wants YOU to extract the legacy data. For an SAP consultant, this is not very realistic (unless the legacy system is another SAP system). Most of us do not understand the workings of the myriad legacy systems. The client is usually expected to produce one or more legacy system technical experts for you to liase with. You normally negotiate with the technical expert about every facet of of the data migration. In addition, you will liase with business users, who will help you and the implementation team to logically validate that the final solution (turnkey SAP production system, fully loaded with data) will meet the client's business needs.
Finally, you mentioned how do you track the mapping of master data between legacy and SAP. There are many ways to do this. I normally try to get the legacy person do the conversion on his end, eg, when he gives you the load file, you would like to have already translated the master data and inserted the SAP relevant values into the file. If this is not possible, I usually use MS Access databases to maintain a master map, and I perform the mapping on a PC. If your data package is small, you can probably get by using MS Excel or similar.
Good Luck,
DB49

How to set up automatic payment for the purchase order

Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advance

Either you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text

Report for released purchase order

Hai guru's
this is second time but i did't get any good replay please consider this, i want any standard report for released purchase order,means(i released two backdated po today next day i verify the report ME2n,those po are not display, the system take only document date not released date, now i am using CDHDR through this i got the report. but it is big process, so once check this and send your valuable solution.
Prasad

Hi Krishna,
You could use Me2N with the dynamic selection coupled with normal selection screen.
In Dynamic selection(3rd icon in screen).....you can select for which company code, release indicator as released....and save it as default variant.
hope this should solve your query
Sk.

Unable to preview Contract Terms for Standard Purchase Order

Unable to preview View Contract Terms for Standard Purchase Order,displays error
We have defined the same contract terms and Document type layouts to documents Contract Purchase Order and Standard Purchase Order.
Created a Contract PO,Attached a template able to preview the contract template in PDF successfully
Created a Standard PO,Attached a template not able to preview the contract template in PDF
Displays the foll error
Problem: The system could not generate the PDF document.
Reason: The system detected an error in the following code/object.
Code: XML
Object: PO
Action: Please contact the system administrator and try again
### Steps to Reproduce Problem ###
Steups
Created a custom XSL-FO template for Contract template and defined it for Standard PO and Contracts PO.
Steps to Reproduce
1.Create a PO,give any category of 100 Qty
2.Click Terms and CLick Author Contract Terms\
3.Select the custom Template ,Click Apply Template
4.Click Preview.
Following error displayed
Problem: The system could not generate the PDF document.
Reason: The system detected an error in the following code/object.
Code: XML
Object: PO
Action: Please contact the system administrator and try again
Please Note:The above scenario works for Contracts PO.
The problem is only for Standard PO
We have reviewed note:454479.1
The file version of POXVCOMB.pls 115.69.11510.28
But we have another test instance this also has the same version , the scenario works fine
So we are confused why this is reproducible only for a particular instance with same file versions
If anyone can suggest a solution pls give me a reply
Already SR is logged for the same -SR 3-1272761221, awaiting reply from support

Please reply if any update on the above query is present.

Urgent - How to change Item category for Open Purchase Order

Hi Team,
Lil bit tricky issue.
My client has asked us to change the existing Item Category values, Combinations, Category Set etc. Its been changed and uploaded successfully.
The question here is how we need to handle the category for Open Purchase Order. How to update the same.
Do we need to do manually or any other way ?
Please advice
Regarads,
John

Hi John,
This is reallly a tricky issue!
I guess you cannot change the category of an existing PO's.
This field will be greyed out once we save the form...there were no profiles/other setups to enable this field.
For all new PO's since you have changed the new category value that should not be a issue.
Lets wait for some of our colleuges opinion.
I guess PO cancel should be the final option if we dont hear any new work arounds.
Thanks
-Arif.

Committment is still showing for closed purchase order

Similar Messages

Maybe you are looking for