Commodity codes for foreign trade

Hi. I am a FICO support analyst but am currently trying to support SDMM as well while we are recruiting a new support analyst for those modules, so this isn't my area of expertise. We use ECC6. FI, CO, SD, MM, and COPA (costing based) for reporting.
I have been asked to set up a new commodity code for a product and country (Plywood from Brazil) we haven''t imported from before. So far I have:
Found an ICN for Plywood of the correct type
And (just in Dev so far):
Defined a commodity code length for Brazil in the IMG - IMG > S&D > Foreign Trade/Customs > Basic Data for Foreign Trade > Length of Commodity code/Import Code Number
Defined the commodity code for the material, with correct country, code and UOM of M3) in the IMG - IMG > S&D > Foreign Trade/Customs > Basic Data for Foreign Trade > Define Commodity Codes/Import Code Numbers by Country
Is there anything else I need to do?
Thanks in advance
David

hi,
u need maintain:
Maintain Keywords for Commodity Codes / Import Code Numbers
IMGSD Foriegn Trade/CustomsBasic data for Foriegn TradeMaintain Keywords for Commodity Codes / Import Code Numbers
Thanks & Regards
Swathi

Similar Messages

Update country codes for foreign trade statistics

Hi all !
I am updating our SAP Systems with all new Country Codes (ISO-Alpha-2) for foreign trade statistics (and preference calculation).
For example Monaco was a unique code "MC" with key "001" (same key of France). Now I have to change this code "MC" to "FR", but I can create only one key "FR" into SAP. So I've just modified the "ISO-Code" field with "FR".
What do you think about this ? Is this modification OK ? Thanks for your support !
Greets.
David

Nobody ????

Deletion of commodity code in foreign trade of the material master

Hi,
can we delete the commodity code in materials master data of the foreign trade tab? if so, how.

Then you have to do customizing for table T604.
go SM30, enter T604 as table and click button customizing. Skip project and SAP will take you to the customizing knot.

Multiple values for Commodity Code/Import code number for Foreign Trade

Hi Experts,
Is it possible to enter the multiple values for Commodity Code/Import code number for Foreign Trade field for plant/country specific data in transaction MM02 using any BADI/User Exit ? If yes, suggest the name of the BADI/User Exit
Thanks,
Narayan

how can one material in one plant have 2 commodity codes? This is not logical.

Changing commodity Code for material grp under certain plant

Hi,
I would like to change commodity code for some material group under certain plant
May I know how to do this.
I went to the following SPRO path, however, the table does not mention the plant and the material group for me to change.
SD>Foreign Trade/Customs>Basic Data For Foreign Trade>Define Commodity Code/Import Code Numbres by Country.
Please let me know.
Thank.
Tuff

Hi Tuffy,
The commodity codes are defined by Country, not at Plant-Material group level.
You can find this customising on: SPRO > Materials Management > Purchasing > Foreign Trade/Customs > Basic Data for Foreign Trade > Define Commodity Codes / Import Code Numbers by Country.
I hope this help.
Kind regards,
Sandra

How to change commodity Code for material grp in certain plant

Hi,
I would like to change commodity code for some material group under certain plant
May I know how to do this.
I went to the following SPRO path, however, the table does not mention the plant and the material group for me to change.
SD>Foreign Trade/Customs>Basic Data For Foreign Trade>Define Commodity Code/Import Code Numbres by Country.
Please let me know.
Thank.
Tuff

Hi,
Commodity codes are define at country code level not on basis of plant or material group
Weather it is one plant or many plants belongs from one company or different companies the commodity code is unique and it define by country legal authorities which are responsible for foreign trade.
You can add commodity code for country and then you individually or by mass change you can change in material master.
Kapil

Mandatory field Export/Import Procedure for Foreign Trade

Hello all!
Is there any possibilty to define the field Export/Import Procedure for Foreign Trade
within the infoset as a mandatory field?
Table T162 doesn't show me this field.
Kind regards,
Barbara

Hello,
in customizing under "Materials Management --> Purchasing --> Foreign Trade/Customs --> Control Foreign Trade Data in MM and SD Documents --> Incompleteness Schemas for Foreign Trade Data" you can create an incompletion procedure defininig the documents fields assigning a control type. Then in the subsequent customizing step "Foreign Trade Data in MM and SD Documents" you can assign the Incompleteness schema to each country code, choosing import or export.
Hope to be useful.
Best regards,
Andrea

Default Values For Foreign Trade Header Data

Hello,
I have defined a price condition (ZPFR) to gather the price from the company to the custom office (the customs office through which the goods enter or leave the country).
I want that price condition to be determined in the pricing procedure in foreign trades. The fields in the access sequence are the Plant and the Customs office. In customizing, in the point Default Values For Foreign Trade Header Data, I have defined a line for the Departure country, the Destination Country and the proper values for the Office of exit, Export Custom Office and Office of destination (the same that I have selected in the condition record). But when I create a sale document, this condition does not determine because the Customs office seems not to have any value in the document. Does anybody what I am doing wrong?
Thank you in advance,
Silvia

You require to do thenecessay configuration for Foreign Trade Data:
IMG --> Sales and Distribution --> Foreign Trade/Customs --> Basic Data for Foreign Trade --> (Do the necessary configuration here)
In most probability, it will not default, but it is required to be maintained in Invoice (based on configuration)
Regards,
Rajesh Banka
Reward points if helpful.

Export/import procedure for foreign trade field in PO item

Hi Experts,
I met a problem in import PO. Is there a possible way to make the Export/import procedure for foreign trade field in PO item automatically be determined?
Thanks,
Emily

IF the import data tab shows up is depending on customizing for foreign trade data.
The setting is done in IMG
MM > Purchasing > Foreign Trade/ Custome > Control FT data in MM SD documents > Import screens in purchasing document

User exit for foreign trade data in domestic scenario

Hi,
i need to fetch some batch characteristics in foreign trade/ customs tab of delivery.
The user exit 'EXIT_SAPLV50E_003' is working fine for the export scenario.. i.e. when the likp-expkz (export indicator) is NON-Blank.
but the requirement now is to fetch the characteristic in Domestic scenario. in this scenario the likp-expkz (export indicator) will be BLANK. so it will not trigger this user exit.
Can you please tell me , which user exit i can use to get the data for 'foreign trade' in domestic scenario.

Hi,
i need to fetch some batch characteristics in foreign trade/ customs tab of delivery.
The user exit 'EXIT_SAPLV50E_003' is working fine for the export scenario.. i.e. when the likp-expkz (export indicator) is NON-Blank.
but the requirement now is to fetch the characteristic in Domestic scenario. in this scenario the likp-expkz (export indicator) will be BLANK. so it will not trigger this user exit.
Can you please tell me , which user exit i can use to get the data for 'foreign trade' in domestic scenario.

BADI for Foreign Trade Data(EIKP)

Hi ,
I need to update/change Foreign Trade Data(EIKP) during Invoice creation.
I would just like to ask if any of you have used a BADI for Updating values for Foreign Trade Data during Invoice Creation (VF01).
Thanks!
Donna
Edited by: Donna Cherr Matias on Feb 26, 2009 6:04 PM
Edited by: Donna Cherr Matias on Feb 27, 2009 3:29 AM

Hi ,
I need to update/change Foreign Trade Data(EIKP) during Invoice creation.
I would just like to ask if any of you have used a BADI for Updating values for Foreign Trade Data during Invoice Creation (VF01).
Thanks!
Donna
Edited by: Donna Cherr Matias on Feb 26, 2009 6:04 PM
Edited by: Donna Cherr Matias on Feb 27, 2009 3:29 AM

Expt/Imp Proce & Buss.Transaction Type for Foreign Trade for Puchase order

Hello All,
I need to get the EIPO-EXPRF(Export/Import Procedure for Foreign Trade) and EIPO-EXART(Business Transaction Type for Foreign Trade) for Purchase Order. Is there any function module available for this.
To get the same information (EIPO-EXPRF and EIPO-EXART) for Invoice there is an FM EXPIMP_BUS_TRANS_CUST_PROC_DET.
But I need to get the same information for Purchase orders.
Thank you!
Best Regards,
Sasidhar Reddy Matli.

Hi Jürgen,
Thanks for you reply.
You are right that VI99 are for reporting returns, but my problem is that MEIS in ECC 6.0 now shows the items as a full value
for reporting, if i do this in 4,7 they are not seleted for reporting, and i my view they should not be seleted in MEIS but they are.
what is you opinion.
I just check the movement type in Customizing and the "type of posting" are set to "2" the setting are the same in both 4,7 & 6,0
Regards, Lars

Invoice Spliting for Foreign trade customers

Hi,
I'm doing 4 sales orders(ZPOR) and 4 Deliveries(ZLF) for Foreign Trade Customers
into One Invoice(ZPDS). Invoice is splitting the reason is giving split to different Header data, Number of Foreign trade is 5,6,7,8. The fogreign trade no is giving system internally delivery header foreign trade screen in organization. The system is giving 4 different foreign trade no in 4 delivereis.How can I do the One Invoice.

For different SO & Del to merge into a single invouice your Bill to party has to be same in the header data along with that your Billing Document Types has to be unique also payment terms has to be same...hmm one more point is that incoterms also has to be same otherwise your Invoice will split.
Reward Points if it helps
Regards
N

Business Transaction Type for Foreign Trade determination

Hi Gurus,
Can someone explain me the determinations rules for Business Transaction Type for Foreign Trade ? We had this field as mandatory condition in an incompletion procedure for deliveries .
Regards

Hi
These notes will help you
SAP Note 173411 - Incompletion procedures for foreign trade
SAP Note 354222 - Foreign trade data incomplete for domestic business
SAP Note 386484 - Foreign trade: Differentiated use of incompleteness log
SAP Note 118573 - User exits foreign trade data in SD and MM documents
SAP Note 391764 - Foreign trade:Incompleteness procedure in delivery documents
and related notes
Regards
Eduardo

Maintenance Status for Foreign Trade View

Hi,
What is the Maintenance Status for Foreign Trade View in Material Master Record.
Regards,
Akula

Here are the maintenance statuses for material master
User department      Maintenance status
Work scheduling               A
Accounting               B
Classification               C
MRP                    D
Purchasing               E
Production resources/tools     F
Costing                    G
Basic data               K
Storage                    L
Forecasting               P
Quality management          Q
Warehouse management          S
Sales                    V
Plant stocks               X
Storage location stocks          Z
Regards,
Raymond

Commodity codes for foreign trade

Similar Messages

Maybe you are looking for