Common Array Management software version 6.10.1 for Linux x86_64 availability?

My apologies if this is not the right location but I'm trying to find out when the Common Array Management Software 6.10 will be available for Linus/SUSE 64 bit systems if anyone knows.
Thank you for your time.
G Treadway

Please refer "What’s New in CAM 6.10" in page 7 of Release Notes
mentioned by Nicolas. It says "The Sun Storage Common Array Manager
(CAM) 6.10 release is available only for Solaris OS management hosts.
CAM 6.10 for Linux and Windows hosts is in development and will be
available once it is complete. Until then, continue to use CAM 6.9 for
Linux and Windows, which is available from My Oracle Support (MOS)
https://support.oracle.com ."
Rajkumar S

Similar Messages

  • Sun Storage Common Array Manager software

    trying to configure two storage arrays and cannot find the original disks
    found the website with link to the Sun Storage Common Array Manager software
    http://www.oracle.com/us/products/servers-storage/storage/san/fc/common-array-manager/resources/index.html
    but it is a dead link...
    now i need this software or the two storage arrays cannot be reconfigured
    maintenance for them have lapse so my oracle support is not an option
    any links to be able to obtain the software... doesn't matter even if older version... doesn't need to be latest

    No Good, everytime i go to the download section for software relating to hardware i keep getting asked to
    Add Support Identifiers …
    just a log in account isn't good enough
    so back to my original problem, even though we own the equipment outright, they are essentially a couple of expensive paperweights
    it shouldn't be that hard to obtain even an older version of this necessary piece of software?
    is it possible to obtain support identifiers for sun hardware with expired maintenance? maybe that will allow me to at least download the version of the software that was available at the time of expiration?

  • SUN Common Array Manager software

    When trying to reinstall my SUN StorageTek Host software i get the following error messages
    Error:
    Failed when installing Sun Java Web Console : Failed when installing : [The app. Sun Java Web Console did not install successfully., save RC file , Failed to create RC file ]
    Error:
    Register CBEM C:\Sun\WebConsole\bin\smreg.bat does not exist Copy unregister script 1 file(s) copied.
    Error:
    Start Lockhart C:\Sun\WebConsole\bin\smcwebserver.bat does not exist Copy start script 1 file(s) copied.
    Notice:
    Installation has an error.
    Can somebody help please?

    No Good, everytime i go to the download section for software relating to hardware i keep getting asked to
    Add Support Identifiers …
    just a log in account isn't good enough
    so back to my original problem, even though we own the equipment outright, they are essentially a couple of expensive paperweights
    it shouldn't be that hard to obtain even an older version of this necessary piece of software?
    is it possible to obtain support identifiers for sun hardware with expired maintenance? maybe that will allow me to at least download the version of the software that was available at the time of expiration?

  • Is there a manual I can PRINT for the Airport Utility Software Version 5.5.3 for Windows?

    Is there a manual I can print for the Airport Utility Software Version 5.5.3 for Windows?
    If there is, I can't seem to find it anywhere (in the Software, by using Google, etc).

    I dont' believe there were manuals out there for different versions of the utility. That would be quite a few different manuals.
    There are different manuals for the different base stations however...

  • Newer version of SQL*Plus for Linux

    Is there a newer, more featured version of SQL*Plus for Linux than 8.1.6.0.0? Where would I get it?
    Thanks.

    I have problems installing the oracle 8i client.
    i ordered the oracle servers 8i CD kit for linux .am using the standard edition to install the client.
    but am facing problems.
    the net8 configuration fails.
    what can i do?
    which CD should i look at?
    what do i need to install a client.?
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Boris Mironov ([email protected]):
    Hello,
    I had some problem (mixed OS environment). I solved it by ordering Linux version from Oracle. Oracle send me Linux CD Pack (All software for Linux) with free license for SQL-client only. It means that I have no licenses for products (eg. Oracle8i EE, Oracle8i SE, WebDB, ...). Anyway, I have access to my DB-server from my Linux box and I do not need to pay extra money for licensing because we have enough user licenses for our server.
    Good luck,
    Boris<HR></BLOCKQUOTE>
    null

  • WLC: which software-version support SHA2 certificates for Web Authentification and Web Management ?

    Hello,
    I tried to install new SHA2 3th-Party certificates on our WLCs. There are old WiSM1-Boards and 2504 to support our old 1230 Access Points, running 7.0.251.2, which didn't install it, although the config manual for 7.6 and 8.0 say that SHA2 certificates are supported since 7.0.250.0. When I tried to install the SHA2-certificates I get the message "File transfer failed" an the log says:
    *TransferTask: Dec 12 13:22:14.394: #UPDATE-3-CERT_INST_FAIL: updcode.c:1869 Failed to install Webauth certificate. rc = 1
    *TransferTask: Dec 12 13:22:14.394: #SSHPM-3-KEYED_PEM_DECODE_FAILED: sshpmcert.c:4085 Cannot PEM decode private key
    I tried to install the same certificates on our WiSM2-Boards, running 7.4.121.0 and I failed too. The same certificates could be installed on a 2504 running 8.0.100 without any problems.
    In all 3 cases I tried to install unchained certificates for web management and Level 3 chained certificates  for web authentication. I used the following guides to get the certificates (e.g. taken from the config manual 8.0.100):
    http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html
    http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/70584-csr-wlc-00.pdf
    Which software versions support SHA2 certificates and which didn't ? Is the a list for it ?
    Regards

    Hello,
    I solved the problem. First I used a Debian Linux system with Openssl 1.0.1. After I searched the internet using one of the log messages above I found sites which mentioned to use Openssl 0.9.x. So I tried a productive and security fixes Debian Linux System running Openssl 0.9.8 and I succeeded. The wlcs accepted the certificate files and used it after a reboot. The Web GUI still shows a SHA1 Fingerprint, but the certificate signature Algorithm is SHA2:
    Signature Algorithm: sha256WithRSAEncryption
    When you check the openssl.org homepage Openssl 0.9.8 is still one of the actual version of openssl and is still available and fixed. But the Openssl Roadmap says:
    "We don't want to have to maintain too many branches. This is likely to include a timescale for the EOL of version 0.9.8"
    I don't know the differences between certificates made with openssl 0.9.8 and 1.0.1. Is there anybody who can explain it to me ?
    Regards

  • Upon opening itunes, message says new iphone Software Version 4.3.5 for the iphone.  I click on download.  As it starts download, the est time is 58 minutes! I try it anyway, but the network "times out," no software update occurs.

    Upon opening itunes, I try to download Software Version 4.3.5 update.  Starts off with estmated time of 58 minutes.  Download never completes.

    I'm not sure about your problem but i can tell you that since my girlfriend updated her phone to 4.3.5 it doesnt let her put pictures on. I hadn't updated my iphone and could put pictures on my phone. Since i have updated my iphone to 4.3.5 i can not put pictures on my iphone either and results in my itunes library crashing and closing. How do i email apple to let them know of this prob?? Sorry i couldn't help you with your problem.

  • Looking for software version 4.2.173 for my 8800

    I have a software version 4.2.1.101 on my 8800. Its blutetooth version does not seem compatible with my car. i am looking for ways to download version 4.2.173 which is recommended by my car manufacturer. Can you point me to the right download URLsite? I do not seem to be able to find it.
    Thks and Best Regards
    Samy

    A1367 indicates you have a 4G iPod. Those can go to iOS 6.1.6.
    You can verify by see if the iPod has cameras, if yes it is a 4G
    Connect the iPod to your computer and update via iTunes
    iOS 4: Updating your device to iOS 5 or later
    You need iTunes 10.7 or later on the computer

  • Download Sun Storage Common Array Manager

    Hallo,
    ich habe mir eine gebrauchte SUN StorageTEC 2500 besorgt. Leider war keine Software beiliegend und im Downloadbereich kann ich mich zwar anmelden, bekomme aber niergends wo die Software zum konfigurieren her.Kann mir jemand hier bitte helfen?

    CAM für Windows, Linux and Solaris sind nur in My Oracle Support verfügbar.
    https://support.oracle.com:443/epmos/faces/PatchSearchResults?searchdata=%3Ccontext+type%3D%22ADVANCED%22+search%3D%22%2…

  • Downloading SAM-QFS and Storage Common array manager

    dear,
    I have problem downloading sun products, when i try downloading them it end-up to a page "My Oracle Support Welcome Center" and no link to download any legacy sun products.
    do you know what is the issue.
    thank you

    Hello.
    1) You need access to support.oracle.com
    2) You need have active SI
    Login to support.oracle.com
    pathes & updates -> Product or Family (Advanced search )
    Product - start type product name for quickly find related product
    Select version
    recomend - do not select platform
    See seach result.
    Regards.

  • Software version 30.0.011 for 5800 is

    I updated my phone to version 30.0.011, but after that, phone is not working properly, green button to make a call is not working when phone is on main screen, only when I push menu, after that I can use green button to make a call and battery comsumption is higher then before, I tried to reinstall the software but no change,and new version 31 is still not available for Slovak republik.
    Please could anyone let me know what to do?
    thanks

    You might want to consider resetting your phone. This is sometimes necessary, but I agree that it shouldn't be.
    Note that this operation is going to erase the phone's memory entirely, so make sure you have backups of software that you've installed because this procedure is going to wipe that too.
    Start by using the built-in backup in the file manager to back up your messages, contacts, calendar entries and bookmarks. Do not back up files or settings.
    Switch the phone off.
    Press and hold the green, red and "camera" buttons.
    With these buttons pressed down, switch the phone on and keep them pressed down until you see the "Nokia" logo appear on-screen.
    Let the phone start up, then restore the backup you made previously.
    Finally, re-install the software that was deleted by the reset.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Is the software version 1.1.1 for 80GB classic the most current?

    I have just submitted feedback to apple and they asked me what software i was currently using on my ipod classic. However the drop down menu showed that v 1.1.1 (which i have) is for the ipod VIDEO 5th gen and that for ipod CLASSIC 6th gen it is v 1.0.2. But in itunes it says that the most current version is 1.1.1 for my ipod. What's going on there cos I am having some problems with random pausing during playback, so could this be the problem?

    The iPod feedback pages are out of date as far as firmware version numbers are concerned. V1.1.1 is the current firmware for Classic models.
    I take it you've tried reseting the ipod. Is this problem random or does it happen at the same point every time in particular files? If the later you may be able to fix it by reripping the tracks or converting to a different format.
    tt2

  • Going from Mavericks back to Mountain Lion, how do I download the correct software versions from app store for apps like iPhoto etc.

    I have a somewhat older iMac and after installing Mavericks the computer slowed down and the harddrive died. I just got a new harddrive installed and they had trouble getting mavericks to work on it also so they installed Mountain Lion which I am pleased with. I have purchased apps from the app store such as iPhoto and Pages, etc. so I thought I would easily be able to download them for mountain lion. When I look for the apps to download on the app store it lists the versions I had with Mavericks. iPhoto for example says I can download it for free but in the compatibility sections it says it requires OS 10.9 or later. Where can I find and install versions of my software such as iPhoto and iLife that will work again with Mountain Lion?

    Try downloading an app. There are those here who believe that the MAS will determine that you have OS X Mt Lion and actually download the app that your kit needs.

  • Version 920 of Oracle9i for linux (before Mar-26)

    now links to 3 disks of lnx_920_disk(1-3).cpio.gz are replaced (2 days ago) with links to 3 disks ship_9204_linux_disk(1-3).cpio.gz, but I need the link to the 3rd from 920. I finished and backed up 1 and 2 (from 920), and suddenly the 920 links disappeared without any trace in favor of these 9204...
    The old version surely still exists on the server (I was downloading the disk 2 while its link wasn't on the website, since I selected it while it still existed and my download program remembered it, but too bad i didnt select disk 3 in advance).
    Why is link to 920 removed so suddenly? It should be kept at least a week or two links to both versions at the same time...

    We do recommend the 'latest' 9.2.0.4 patchset version of Oracle9i but you can still get that last old file at:
    http://otn.oracle.com/software/htdocs/devlic.html?http://download.oracle.com/otn/linux/oracle9i/9201/lnx_920_disk3.cpio.gz
    OTN

  • Where can i get  the demo version of BPA Suite for linux?

    Hi guys,
    The article "Oracle Suite Instalation and Administration Guide" suggests use the installer called install_bpa<version>.<build number>.sh, but I can not find it for download.
    Thanks in advance.

    Hey everyone,
    Does anyone have any more info about this? I'm also looking for this. Section 2.2 (page 7) of the BPA installation guide is the location that says you can install BPA on Linux, but I am unable to find the .sh to begin.
    Any help is greatly appreciated.
    Thanks,
    Auggie

Maybe you are looking for