Common chart of accouts, Alternative chart of accounts

HI
While am working for chart of acconts, I want to see the accounts of common chart of accounts 'abcd' (common chart of accounts) with alternative account of our local chart of account. How do I do that?
Please resove the issue.
Thanks,
Sahara.

Hi,
Here my query is different in T.code F.10 while entering the 'chart of accounts as group chart of accts' system showing the list of G/L accounts corrensponding to group chart of accounts. OR in F.10 entering the 'chart of accts as coutry specific' system lists the G/L accoutns corrsponding with country specific.
My requirement is for One of the particular G/L 100100 account want to see/view both group and country specific chart of accouts list? How to do that?
Please resolve the issue.
Thanks,
Sahara

Similar Messages

Carried forward Account for Alternative Chart of Account

Hi Experts,
I'm implementing an alternative chart of account for France Company (local chart of account). Now I have to insert the Account related to Carried forward (transaction code OB53). Do you have any suggestion? which is the GL code account?
Another question, must I create the management accounts and I have to associate these accounts in the Operative Chart of accounts?
Thank in advance
Kind Regards
Giampaolo

yes u can do
fist
u can make the entry and blank valuation class and give the gl account in wrx
so that it will take this GL account for blank materia number
or
u cna give valuation class to material group
MM purchasing -- materal master -- Entry Aids for Items Without a Material Master
hope this helps

Report for cost centers with alternative chart of account

Hi.
I try to make a report in cost center accounting and in profit center accounting with alternative chart of accounts. We have primary chart of account for 20 companies and alternative chart of account for 1 company. How can I make a report in CO-OM and PC accounting with alternative accouns? Is there any metod? Are on the intrenet somewhere instructions?
Thanks

Marko,
CCA reports are possible only by cost elements (which an have different description from a GL account).
PCA reports are possible only for main account (alternative account not available in GLPCT table).

Alternative chart of accounts

Hi Masters,
I have two Chart of Accounts 1) main COA 2) alternative COA
How entry will flow to these 2 a/cs.
Alternatine coa is country speciffic.
regards,
Ani

Dear Michal,
I'm relaxed after looking at your thread related to Alternative Chart of Accounts since I have got into same problem.
NB: Apologies for not opening up a new thread as against forum rules. This is because I may not be able to get Michal's response in time, if I deviate from this thread.
My Client Requirement: In Spain, for the year 2008, the Spanish Chart of Accounts (country COA) has been changed and due to this, we have to change corresponding alternative accounts of several GL accounts (range includes Reconciliation accnouts with Open Item Mgnt, Accounts managed with 'Post Automatically only' and Normal accounts).
Problem is quite obvious that these GL accounts have balances....
Michal,
Can you please forward ABAP code that you have been using to get rid of this situation? I would really be gratefully if you can do this needful.
Regards
Mahesh
Edited by: Mahesh M on Nov 29, 2008 11:15 PM

Update BSEG with alternative G/L account after assigning it at company code

Hello,
I'm facing an issue concerning the update of BSEG and other tables.
We have started to work in Production from January 2010 without alternative chart of accounts. So many posting till now.
Now the company wants to set up the local chart of account for some legal requirement. I know that once we have put an alternative chart of account, we can not change the local G/L account before balance at 0.
But in my case, the local chart of account was not assigned to the company code. So I can put what I want in the group G/L account as alternative account.
The idea is to create a local chart of account, after all local G/L accounts related to the local chart of account and after assign the local chart of account to the company code.
The problem is that for all historical items (january 2010 to June 2010) I don't have the local G/L account in BSEG and other tables (FI)...and I need it for reporting.
Thanks for your help
Edited by: Oneforh on Jun 18, 2010 10:15 AM

Dear,
Check: http://sap.ittoolbox.com/groups/technical-functional/sap-acct/copy-chart-of-accountsgl-accounts-1530253
Re: change alternative chart of account
Change of Chart of Accounts
changing chart of accounts
I prefer to create new GL with new chart of accounts and copy the old GL balances.. but practically I didnt come across these situation.
Check.
Regards,
Syed Hussain.

ID for Alternative G/L Account

HI gurus,
What is the functionality of "ID for Alternative G/L Account" in the alternative assignment of reconcillation account? please help me on this issue
Thanks,
Hari

Hello ... Merry Christmas ..
I think the only option that would serve, although you should check this account is confidential.
The definition of confidential account reads:
Select this option to define specific accounts as
confidential. When the option is selected, some users are not
allowed (by the authorizations defined) to use these accounts or
view their activities in the system.
There is however, an observation that is related to the following:
How to prevent users to see confidential accounts
SAP Note Number: 1004877
Symptom
How to set up SAP Business One such that a user will not be able to see Certain accounts
Solution
Follow the steps below to set up a user such That Certain accounts are not shown:
1. Log on as superuser.
2. Go to: Financials -> Chart of accounts (CoA).
3. Select account to be hidden by highlighting it.
4. Tick box 'Confidential'.
5. Click on 'Update'.
6. Go to: Administration -> System Initialisation -> authorizations -> General authorizations.
7. Select the user by clicking on the username-> 'General' -> Access to confidential accounts -> 'no authorization'.
Effects of this setting for the Malthus restricted user:
1. Accounts marked as 'Confidential' are not displayed in CoA.
2. Accounts marked as 'Confidential' are not displayed in the 'Choose from' lists.
3. Accounts marked as 'Confidential' are not displayed in any of the financial reports (Profit and Loss, Trial Balance, Balance Sheet).
I hope it will help
Best regards

Horizontal Bar Chart and Overlaying Line Chart

I am using SSRS 2008 and developing my reports in BIDS.
I have a report with two data points. I want to chart the first as a bar (horizontal) chart and then the second as an overlaying line chart.
I created both data series, originally, as a bar chart. I have clicked on the second series in the "Drop Data Fields Here" area and changed the chart to a line chart. When I do that, it changes both series to a line chart.
However, if I use the column (vertical) chart for the first series, it will let me make the second one a line chart.
Is this a limitation of SSRS 2008? Can I not have one data point be the horizontal bar chart and the second one a line chart?
If so, are there any suggestions how to get around this?
Thanks.

Both charts for SSRS 2005/2008 are very limited when it comes to horizontal charts and are infact supporting only left-to-right bar charts, with no ability to combine them with other charting types (lines, areas, points etc.). For a SSRS charting solution that supports all types of charting type combinations in left-to-right and right-to-left horizontal fashion you can use Nevron Chart for SSRS - www.nevron.com. Besides a huge number of charting types and subtypes (most of which are not available in the MS Chart for SSRS 2008) it also provides better image quality in 2D and 3D modes, more settings, has support for rich text formatting in texts, has image filters, ability to customize via C# code and implements many more large and small charting related details.
Best regards,
Crank

Is there a way to display the legend for a chart, but not the chart?

Hi,
I have a stacked column chart and a line chart on top of each other. I can't use the legend for the stacked column chart because the data will change from month to month, and the 2 charts will not be aligned. I copied the stacked column chart to another part of the canvas and want to display only the legend, but the chart is still displaying. Is there a way to prevent the chart from displaying? Thanks.

hi Jim Wojewnik,
we can show only the legend in a pie chart by dragging the edges to closer.do the following,
select the pie chart,select the edge of the chart and make it small and u ll find the pie chart shrinking.make it lean such that the pie chart disappear.
try this work around and let me know.
regards,
ravi.

Two diffetent chart types in one chart

Hi
Can anyone tell me how i put a line and bars in one single chart?
Regards.
Oliver

I don't think you can do it directly, but you can always set one on top of another, make the tops ones background invisible (No fill). make sure you select the object it self, not the individual chart objects only, and make its background (might be its "fill" property in the inspector) none. ( i am at a Windoze machine at work right now).
don't forget to make the charts background's also none.
just one idea. I just don't think there is multiple chart types in one chart yet. I might be wrong. Anyone at a mac that can verify for me?
Thanks alot everyone,
Jason

Using "Organizational Chart Launcher" and "Organizational Chart Tester" iVi

Hello,
For MSS, we would like to display a graphical version of Org Chart. We are not at a stage where we can implement OrgPublisher at this point.
We did configure u201COrganizational Chart Launcheru201D and u201COrganizational Chart Testeru201D iViews in the portal, and they look semi decent.
Our concern is that some old documentation states that these iViews are only are for Test purposes, and not for production! We want to know if we can use these iViews as an interim solution until we move onto OrgPublisher?
Any help would be much appreciated...
Thanks,
Harman

Hi Harman,
I am not sure I can say yes or no to your question, but my advice would be to raise an OSS message with SAP and see what they say. The main thing I would ask is why they are not recommended for production use...?? If you understand why you can make the judgement call whether or not to use them in production (e.g. do they not perform well, what additional load do they cause etc...), with that information you can then decide if it makes sense for you to use them in your situation (e.g. you might have very limited users).
BRgds,
Simon

Will the Radio Charts and/or Billboard Charts ever be updated?

Will the Radio Charts and/or Billboard Charts ever be updated?
Looking at them right now - the radio charts seem to be stuck in time somewhere around last fall - October-ish if I can judge properly by the songs showing at the top of the stations' charts....
The Billboard charts - stop at 2004. Nothing at all for 2005, let alone anything for 2006.
Dare I ask if these will ever be updated again? What's the point in having them if they aren't going to be updated? Might as well dump 'em!

Same here, my iTunes Music Store does not provide any Billboard chart information after 2004.
To be perfectly honest, one of the reasons that I liked iTunes in the first place was the fact that it was easy to find good songs. I can't count how many times I have sat down to find some good songs, and so I try to go find last year's top songs... then I realize I can't even do that!
Frankly, it's very frustrating, because I have been a long time user of iTunes, so from my perspective, it feels like Apple used to provide a useful feature, but that now they have taken it away.
The most annoying thing about this is that I have SEARCHED for an explanation, and I can't find one. I have searched the iTunes help system, and I have searched the Support website, and I am getting zero results for Billboard and charts.
At this point, I just want to know WHY. Is it:
(1) Apple is no longer able to show Billboard chart information for 2005+? (And if so, are they working on getting this information, or have they just given up?)
(2) Apple just hasn't gotten around to adding this information? (And if so, what's the ETA? They're over a year behind! If they're low on resources, then heck, I'll do the work FOR them for free!)
(3) Some other explanation?
-- PJ

Web Application Designer - Chart (Bar Chart) - Value description of chart

Hi Community,
i use the Web Application Designer in BW 3.5 to create a bar chart with the chart web item (Bar chart). Everything works fine - but in the query the values are 10.000.000 and much more. The description in the chart lokks like 10000000 - Nobody can handle this information in the chart - i could not change the values in the ODS. Is there a possibility to show only steps in 1.000.000 in the chart. In the chart description it should look like 10 and the in a text "in billion".
Is the chart designer in the WAD possible to habdle this ? Hope you have a solution

After applying IGS patch. It is resolved.

Change alternative chart of account

what is the differents steps and blocking points when you want to change a lot of alternative account (create new one, replace old account per a new account,...). What are the impacts and the blocking points in financial statement?
Thanks for your feed back.

Hi,
I have the same issue. I have to change the alternative account to some accounts that have no balance zero. In order to put the balance zero, I have to do a posting, but previously I have to set all the automatic accounts to manual accounts in FS00, and I don't know how to solve this issue for reconciation accounts. For vendor and customer reconciliation accounts, I can create a virtual customer and vendor in order to do this posting, but what should I do for asset reconciliation accounts? Should I use ABF1 in order to be able to do the direct posting to the asset reconciliation account?
Thank you very much,
Ariana

How to reset drill-down column-chart based on map-chart?

Hi guys,
I'm facing pritty common issue while designing one of my dashboards. Let me describe a little bit more:
1. I have some data extracted from BW using Query as WebService into my Xcelsius spreadsheet.
2. I have map-chart - regions for some country.
3. I have a drill-down column-chart, which displays data for a selected region.
At the beginning column-chart displays results for entire country (which, in fact, is not exactly drill-down). The issue I'm fasing is, that in case I select any region and the data is drilled-down into my column-chart, I have no option to show data for the entire county in the column-chart anymore (the only one way is to restart the report).
Are there any possible way to do this, or am I doing a design error while displaying data, which is not drilled-down, into a chart which is intended to display drill-down data only?
Any help would be highly appreciated.
Thanks in advance.
Ivaylo Mutafchiev
Varna Business Services
Project Manager BOBJ

Ivaylo Mutafchiev,
I understand your problem now. So your column chart data which is coming from the QAAWS query should be having a prompt which is bound to some cell in excel. and your map might be passing the values for prompt isn't it? in your case the map might be passing a region.
All you need to do is put the prompt in the web service for region as a optional prompt. Now pull in a check box or a Push button(name it as reset or something.). while binding the data to the check box or push button (source data) bind it to a blank cell. when user clicks on it , it passes a blank vlaue to the region(this is ur input for region) which will inturn makes the prompt optional for the region web service. which should pull all the data for all the region.
The whole idea lies in somehow passing a blank cell to your web service whose region prompt is optional.
Thanks,
Karthik

Programitically creating column series to flex chart not showing the chart

I want to create n number of series dynamically when i run my
application.
where n can be any value it depends on the data which i
retrieve from database. below i pasted the example
( in this example i have taken n = 4 i.e., CountMax=4 if i
change the CountMax=6 then it should generate 6series dynamically
after calculating the values. ). just copy the below code and paste
it in Flex builder and run the application.
in this example i am facing problem, chart series are not
showing. i dont know the reason why its not showing, if anyone got
the solutions for the problem please let me know. my actual
requirement is to retrieve data from Salesforce account and want to
populate the arraylist then display the chart.
<?xml version="1.0"?>

<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="drawChart()" layout="absolute">
<mx:Script>
<![CDATA[
import mx.controls.Alert;
import mx.charts.series.ColumnSeries;
import mx.charts.series.LineSeries;
import mx.collections.ArrayCollection;
[Bindable]
public var categoryArray:ArrayCollection = new
ArrayCollection();
[Bindable]
public var sArray:ArrayCollection = new ArrayCollection();
public function drawChart():void
var histMax:int = 25;
var histMin:int = 5;
var countMax:int = 6;
var tmpArr:Array = new Array();
categoryArray.removeAll();
for(var n:int = 0; n < 10; n++)
tmpArr[n] = histMin + Math.round((2 * n) / 20 * (histMax -
histMin));
categoryArray.addItem({data:tmpArr[n]});
// Add a series to the chart with the x-values and y-values
// from the arrays and set the series type to a column chart
for(var chartSeries:int = 0; chartSeries < countMax;
chartSeries++)
var tmpseries:Array = new Array(10);
for(var i:int = 1; i < 10; i++)
tmpseries = 3 * Math.random();
var cs:ColumnSeries = new ColumnSeries();
columnchart1.series.join( = [cs];
sArray.addItem({data:tmpseries});
//columnchart1.dataProvider = sArray;
cs = new ColumnSeries();
cs.dataProvider= sArray;
cs.displayName = 'Series';
cs.yField = 'data';
columnchart1.series[chartSeries] = cs;
]]>
</mx:Script>
<mx:Panel title="Dynamic Series Adding Sample"
width="195%" height="90%" layout="absolute">
<mx:ColumnChart id="columnchart1" height="338"
width="396" showDataTips="true" type="stacked" x="10" y="0">
<mx:horizontalAxis>
<mx:CategoryAxis dataProvider="{categoryArray}"
categoryField="data"/>
</mx:horizontalAxis>
<mx:verticalAxis>
<mx:LinearAxis baseAtZero="true" maximum="3"
autoAdjust="true"/>
</mx:verticalAxis>
</mx:ColumnChart>
</mx:Panel>
</mx:Application>

<?xml version="1.0"?>

<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="drawChart()" layout="absolute">
<mx:Script>
<![CDATA[
import mx.graphics.SolidColor;
import mx.charts.HitData;
import mx.controls.Alert;
import mx.charts.series.ColumnSeries;
import mx.charts.series.LineSeries;
import mx.collections.ArrayCollection;
[Bindable]
public var categoryArray:ArrayCollection = new
ArrayCollection();
public function drawChart():void
var histMax:int = 25;
var histMin:int = 5;
var countMax:int = 3;
var tmpArr:Array = new Array();
categoryArray.removeAll();
for(var n:int = 0; n < 10; n++)
tmpArr[n] = histMin + Math.round((2 * n) / 20 * (histMax -
histMin));
categoryArray.addItem({data:tmpArr[n]});
var cs:ColumnSeries = new ColumnSeries();
columnchart1.series = [cs];
// Add a series to the chart with the x-values and y-values
// from the arrays and set the series type to a column chart
for(var chartSeries:int = 0; chartSeries < countMax;
chartSeries++)
var tmpseries:Array = new Array(10);
for(var i:int = 0; i < 10; i++)
tmpseries
= 1 * Math.random();
if(tmpseries > 0.5)
tmpseries
= 1;
else
tmpseries = 0;
var testArrCol:ArrayCollection = new ArrayCollection();
for(var j:int =0; j < 10; j++)
var m:Number = tmpArr[j];
var m1:Number = tmpseries[j];
testArrCol.addItem({mData:m.toString(),nData:m1.toString()});
cs = new ColumnSeries();
cs.dataProvider = testArrCol;
cs.displayName = 'Series' + chartSeries;
cs.xField = 'mData';
cs.yField = 'nData';
columnchart1.series[chartSeries] = cs;
public function myTipFunction(hitData:HitData):String
return(ColumnSeries(hitData.element).displayName +" - "+
hitData.item.mData + "\n" + "Value : "+ hitData.item.nData);
]]>
</mx:Script>
<mx:Panel title="Dynamic Series Adding Sample" width="98%"
height="90%" layout="absolute">
<mx:ColumnChart id="columnchart1" height="338"
width="396" showDataTips="true" type="stacked" x="10" y="0"
dataTipFunction="{myTipFunction}">
<mx:horizontalAxis>
<mx:CategoryAxis dataProvider="{categoryArray}"
categoryField="data"/>
</mx:horizontalAxis>
<mx:verticalAxisRenderer>
<mx:AxisRenderer visible="false"/>
</mx:verticalAxisRenderer>
</mx:ColumnChart>
</mx:Panel>
</mx:Application>

Common chart of accouts, Alternative chart of accounts

Similar Messages

Maybe you are looking for