Common Components reporting 'Failed' installing 11.1.2.1 on 2008 R2 64-bit

I am installing 11.1.2.1 on Windows Server 2008 R2 64-bit. My first installation pass is for my Web Application server; Foundation, APS Server and EAS Server. 'Common Components' is showing status 'Failed'.
I extracted the following packages (and have been back through both the docs and to eDelivery to make sure I didn't get an incorrect platform version or miss anything).
V25495-01 Oracle Hyperion Performance Management System Installer, Fusion Edition Release 11.1.2.1.0 for Microsoft Windows (64-bit)
V25464-01 Oracle Essbase Release 11.1.2.1.0 Part 1 of 2
V25500-01 Oracle Essbase Release 11.1.2.1.0 Part 2 of 2 for Microsoft Windows (64-bit)
V25466-01 Oracle Essbase Clients Release 11.1.2.1.0
V25470-01 Oracle Hyperion Enterprise Performance Management Reporting and Analysis Core Components Release 11.1.2.1.0
V25494-01 Oracle Hyperion Enterprise Performance Management System Additional Content Release 11.1.2.1.0
V25496-01 Oracle Hyperion Foundation Services Release 11.1.2.1.0 for Microsoft Windows (64-bit) Part 1 of 7
V25497-01 Oracle Hyperion Foundation Services Release 11.1.2.1.0 for Microsoft Windows (64-bit) Part 2 of 7
V25498-01 Oracle Hyperion Foundation Services Release 11.1.2.1.0 for Microsoft Windows (64-bit) Part 3 of 7
V25499-01 Oracle Hyperion Foundation Services Release 11.1.2.1.0 for Microsoft Windows (64-bit) Part 4 of 7
V25459-01 Oracle Hyperion Foundation Services Release 11.1.2.1.0 Part 5 of 7
V25460-01 Oracle Hyperion Foundation Services Release 11.1.2.1.0 Part 6 of 7
V25461-01 Oracle Hyperion Foundation Services Release 11.1.2.1.0 Part 7 of 7
installTool-summary-datetime.log contains:
( Aug 26, 2011 10.11.46 AM ) Fail [   Unknown   ] installing ocm installTool-install-datetime.log contains:
[2011-08-26T10:19:58.379-07:00] [EPMINS] [ERROR] [EPMINS-00531] [oracle.EPMINS] [tid: 24] [SRC_CLASS: com.hyperion.cis.SetFilePermissions] Error: [[
ServiceException: (error code = -30001; message = "The system cannot find the file specified.
(2)"; severity = 0)
     at com.installshield.wizard.platform.win32.Win32FileServiceImpl.setFileAttributes(Native Method)
     at sun.reflect.GeneratedMethodAccessor409.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.wizard.service.file.GenericFileService.setFileAttributes(Unknown Source)
     at com.hyperion.cis.SetFilePermissionsProductAction.setPermissions(SetFilePermissionsProductAction.java:67)
     at com.hyperion.cis.SetFilePermissionsProductAction.install(SetFilePermissionsProductAction.java:42)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(PureJavaProductServiceImpl.java:2969)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(PureJavaProductServiceImpl.java:8048)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(PureJavaProductServiceImpl.java:7199)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(PureJavaProductServiceImpl.java:5240)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Thread.java:619)The only suspicious entry I can find in the individual component install logs is in common-ocm-install.log:
(Aug 26, 2011 10:23:48 AM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Running: E:\Oracle\Middleware\EPMSystem11R1\ccr\bin\setupCCR.exe -S EPMInstall -V 11.1.2.0 -s -d ...
(Aug 26, 2011 10:23:48 AM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Environment: [USERPROFILE=C:\Users\USERNAME, JAVA_HOME=E:\Oracle\Middleware\jdk160_21, POSTED_JAVA=E:\Apps\Hyperion\Installation\\jre\winAMD64\1.6.0, SystemDrive=C:, Path=C:\Program Files\HP\NCU;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\, PROCESSOR_REVISION=2c02, VERSION=11.1.2.0, USERDOMAIN=SERVERNAME, ALLUSERSPROFILE=C:\ProgramData, dirname=E:\Apps\Hyperion\Installation\, =E:=E:\Apps\Hyperion\Installation, DATE_TIME=Fri-08.26.2011- 9.48.05, SESSIONNAME=Console, TMP=C:\Users\ESSBAS~1\AppData\Local\Temp\1, CommonProgramFiles=C:\Program Files\Common Files, =::=::\, LOGONSERVER=\\SERVERNAME, PROMPT=$P$G, PROCESSOR_LEVEL=6, LOCALAPPDATA=C:\Users\USERNAME\AppData\Local, COMPUTERNAME=SERVERNAME, SystemRoot=C:\Windows, USERNAME=USERNAME, APPDATA=C:\Users\USERNAME\AppData\Roaming, ProgramData=C:\ProgramData, PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC, ORACLE_HOME=E:\Oracle\Middleware\EPMSystem11R1, windows_tracing_logfile=C:\BVTBin\Tests\installpackage\csilogfile.log, TIMEF= 9.48.05, ProgramFiles(x86)=C:\Program Files (x86), windows_tracing_flags=3, TEMP=C:\Users\ESSBAS~1\AppData\Local\Temp\1, ProgramFiles=C:\Program Files, HOMEDRIVE=C:, DATEU=Fri 08.26.2011, ProgramW6432=C:\Program Files, PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 44 Stepping 2, GenuineIntel, PROCESSOR_ARCHITECTURE=AMD64, DATEF=Fri-08.26.2011, FP_NO_HOST_CHECK=NO, OS=Windows_NT, HOMEPATH=\Users\USERNAME, CommonProgramW6432=C:\Program Files\Common Files, TIMEU= 9:48:05, windir=C:\Windows, NUMBER_OF_PROCESSORS=8, PUBLIC=C:\Users\Public, PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\, CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files, ComSpec=C:\Windows\system32\cmd.exe]
(Aug 26, 2011 10:23:48 AM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Executing cmd.exe /c start /wait /min cmd.exe /c "E:\Oracle\Middleware\EPMSystem11R1\ccr\bin\setupCCR.exe -S EPMInstall -V 11.1.2.0 -s -d >> E:\Oracle\Middleware\EPMSystem11R1\diagnostics\logs\install\install-ocm-setupCCR-output.log" ...
(Aug 26, 2011 10:23:48 AM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Finished with exit code 0
(Aug 26, 2011 10:23:48 AM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Running: E:\Oracle\Middleware\EPMSystem11R1\ccr\bin\configCCR.exe -r ...
(Aug 26, 2011 10:23:48 AM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Environment: [USERPROFILE=C:\Users\USERNAME, JAVA_HOME=E:\Oracle\Middleware\jdk160_21, POSTED_JAVA=E:\Apps\Hyperion\Installation\\jre\winAMD64\1.6.0, SystemDrive=C:, Path=C:\Program Files\HP\NCU;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\, PROCESSOR_REVISION=2c02, VERSION=11.1.2.0, USERDOMAIN=SERVERNAME, ALLUSERSPROFILE=C:\ProgramData, dirname=E:\Apps\Hyperion\Installation\, =E:=E:\Apps\Hyperion\Installation, DATE_TIME=Fri-08.26.2011- 9.48.05, SESSIONNAME=Console, TMP=C:\Users\ESSBAS~1\AppData\Local\Temp\1, CommonProgramFiles=C:\Program Files\Common Files, =::=::\, LOGONSERVER=\\SERVERNAME, PROMPT=$P$G, PROCESSOR_LEVEL=6, LOCALAPPDATA=C:\Users\USERNAME\AppData\Local, COMPUTERNAME=SERVERNAME, SystemRoot=C:\Windows, USERNAME=USERNAME, APPDATA=C:\Users\USERNAME\AppData\Roaming, ProgramData=C:\ProgramData, PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC, ORACLE_HOME=E:\Oracle\Middleware\EPMSystem11R1, windows_tracing_logfile=C:\BVTBin\Tests\installpackage\csilogfile.log, TIMEF= 9.48.05, ProgramFiles(x86)=C:\Program Files (x86), windows_tracing_flags=3, TEMP=C:\Users\ESSBAS~1\AppData\Local\Temp\1, ProgramFiles=C:\Program Files, HOMEDRIVE=C:, DATEU=Fri 08.26.2011, ProgramW6432=C:\Program Files, PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 44 Stepping 2, GenuineIntel, PROCESSOR_ARCHITECTURE=AMD64, DATEF=Fri-08.26.2011, FP_NO_HOST_CHECK=NO, OS=Windows_NT, HOMEPATH=\Users\USERNAME, CommonProgramW6432=C:\Program Files\Common Files, TIMEU= 9:48:05, windir=C:\Windows, NUMBER_OF_PROCESSORS=8, PUBLIC=C:\Users\Public, PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\, CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files, ComSpec=C:\Windows\system32\cmd.exe]
(Aug 26, 2011 10:23:48 AM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Executing cmd.exe /c start /wait /min cmd.exe /c "E:\Oracle\Middleware\EPMSystem11R1\ccr\bin\configCCR.exe -r >> E:\Oracle\Middleware\EPMSystem11R1\diagnostics\logs\install\install-ocm-configCCR-output.log" ...
(Aug 26, 2011 10:23:48 AM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Finished with exit code 0
(Aug 26, 2011 10:23:48 AM), Install, com.hyperion.cis.OCMOracleHomeSetup, wrn, OCM installation check failed: E:\Oracle\Middleware\EPMSystem11R1\ccr\bin\configCCR.exe does not existNote that the process looks for ORACLE_EPM_HOME\ccr\bin\configCCR.exe. The location exists, and setupCCR.exe (which gets called first) exists, but there is no configCCR.exe.
If this is really just an OCM (Oracle Configuration Manager) issue then I hope it won't stop me configuring the rest of the environment correctly (OCM seems, at least in principle, like it could be optional), but I'm reluctant even to attempt to configure with install errors unresolved.

I'm experiencing exactly the same problem. Tried re-installing and re-imaging the box several times. This is the first time I'm running into this issue as I have performed several installs on other Windows 2008 R2 servers with no issues.
Does anyone have any idea? I opened SR with Oracle, they suggested that this is a bug (This is due to a known issue with older versions of OCM -unpublished bug 9800347 [http://bug.oraclecorp.com/pls/bug/webbug_edit.edit_info_top?rptno=9800347] . This was fixed in 10.3.4 and backported to 10.3.3.1.1; apparently an older version (10.3.3.1) which is bundled in this kit as this OCM 10.3.3.1).
I'm not buying this explanation as it does not explain why this is happening and why few other times in the past with same system and same version install it worked perfectly fine.

Similar Messages

Oracle Common Components Installation Failed.

Hi
We have installed Essbase Sever on Linux Server (Red Hat Enterprise Linux Server release 6.3) and other Hyperion Products on Windows Server.(V 11.1.2.2)
Installation and Configuration on Windows Sever were Successful and On Linux Server, the Commoncomponents Installation is failed.
Please Find the Logs:
2013-10-26T15:57:59.827+04:00] [EPMINS] [NOTIFICATION] [EPMINS-00001] [oracle.EPMINS.summary] [tid: 27] [SRC_CLASS: com.hyperion.install.util.InstallSummaryUtil] [arg: \n\n[System info]\nTools Level: Drop38...11.1.2.2.0.7418\nBuild version: 11.1.2.2.0.7790\nLocalhost: advltpde01.adweag.local\nSystem info: LINUX amd64\nCurrent Locale: en_US\nHYPERION_HOME: /apps/Oracle/EPMSystem11R1\nOracle inventory location: /home/Hypadmin/oraInventory\nInstallation type: INSTALL\nInstallation mode: ADVANCED\n\n[Pre-install checks]\nPass EPMINS-01024: EPM System Installer successfully resolved the hostname - advltpde01.adweag.local\nPass EPMINS-01026: The operating system is supported - Linux\nPass EPMINS-01063: All environment variables prerequisites have been met.\nPass EPMINS-01074: Inventory is writable\nCompletion status for ocm is Fail\n\n[Install status]\n( Oct 26, 2013 03.52.23 PM ) Pass [000 min 00 sec].Init Tool \n( Oct 26, 2013 03.53.35 PM ) Pass [001 min 12 sec].GUI Wizard \n( Oct 26, 2013 03.55.12 PM ) Pass [001 min 10 sec].WebLogic Application Server - webLogicCommonComponent \n( Oct 26, 2013 03.56.04 PM ) Pass [000 min 50 sec].Oracle Common Files - oracle_common \n( Oct 26, 2013 03.56.28 PM ) Pass [000 min 24 sec].Static Content Files - staticContent \n( Oct 26, 2013 03.56.30 PM ) Pass [000 min 02 sec].Common Components - tools \n( Oct 26, 2013 03.56.36 PM ) Pass [000 min 03 sec].Essbase Product Common Components - essbaseProductCommonComponents \n( Oct 26, 2013 03.56.38 PM ) Pass [000 min 00 sec].Common Components - productCommonComponents \n( Oct 26, 2013 03.57.06 PM ) Pass [000 min 24 sec].Common Components - commonComponents \n( Oct 26, 2013 03.57.08 PM ) Fail [ Unknown ].Common Components - ocm \n( Oct 26, 2013 03.57.40 PM ) Pass [000 min 32 sec].OPMN - opmn \n( Oct 26, 2013 03.57.52 PM ) Pass [000 min 11 sec].Essbase Server - essbase_services \n( Oct 26, 2013 03.57.56 PM ) Pass [000 min 04 sec].OUI \n( Oct 26, 2013 03.57.59 PM ) Fail [005 min 38 sec].Total \nFail ocm assembly was not saved in SoftwareRegistry.\nFail commonComponents assembly was not saved in SoftwareRegistry.\n] trace: [[
[System info]
Tools Level: Drop38...11.1.2.2.0.7418
Build version: 11.1.2.2.0.7790
Localhost: advltpde01.adweag.local
System info: LINUX amd64
Current Locale: en_US
HYPERION_HOME: /apps/Oracle/EPMSystem11R1
Oracle inventory location: /home/Hypadmin/oraInventory
Installation type: INSTALL
Installation mode: ADVANCED
[Pre-install checks]
Pass EPMINS-01024: EPM System Installer successfully resolved the hostname - advltpde01.adweag.local
Pass EPMINS-01026: The operating system is supported - Linux
Pass EPMINS-01063: All environment variables prerequisites have been met.
Pass EPMINS-01074: Inventory is writable
Completion status for ocm is Fail
[Install status]
( Oct 26, 2013 03.52.23 PM ) Pass [000 min 00 sec] Init Tool
( Oct 26, 2013 03.53.35 PM ) Pass [001 min 12 sec] GUI Wizard
( Oct 26, 2013 03.55.12 PM ) Pass [001 min 10 sec] WebLogic Application Server - webLogicCommonComponent
( Oct 26, 2013 03.56.04 PM ) Pass [000 min 50 sec] Oracle Common Files - oracle_common
( Oct 26, 2013 03.56.28 PM ) Pass [000 min 24 sec] Static Content Files - staticContent
( Oct 26, 2013 03.56.30 PM ) Pass [000 min 02 sec] Common Components - tools
( Oct 26, 2013 03.56.36 PM ) Pass [000 min 03 sec] Essbase Product Common Components - essbaseProductCommonComponents
( Oct 26, 2013 03.56.38 PM ) Pass [000 min 00 sec] Common Components - productCommonComponents
( Oct 26, 2013 03.57.06 PM ) Pass [000 min 24 sec] Common Components - commonComponents
( Oct 26, 2013 03.57.08 PM ) Fail [ Unknown ] Common Components - ocm
( Oct 26, 2013 03.57.40 PM ) Pass [000 min 32 sec] OPMN - opmn
( Oct 26, 2013 03.57.52 PM ) Pass [000 min 11 sec] Essbase Server - essbase_services
( Oct 26, 2013 03.57.56 PM ) Pass [000 min 04 sec] OUI
( Oct 26, 2013 03.57.59 PM ) Fail [005 min 38 sec] Total
Fail ocm assembly was not saved in SoftwareRegistry.
Fail commonComponents assembly was not saved in SoftwareRegistry.
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, Reading in ASCII file /apps/Oracle/EPMSystem11R1/tmp/wl_stage/silent.xml.
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, /REPLACE TEXT: <HYPERION_HOME> ON LINE: 3/
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, <data-value name="BEAHOME" value="/apps/Oracle/EPMSystem11R1/.." />
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, /REPLACE TEXT: <ALT_TEMP_DIR> ON LINE: 5/
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, <data-value name="altTempDir" value="/tmp" />
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, Reading in ASCII file /apps/Oracle/EPMSystem11R1/tmp/wl_stage/wl10_install.sh.
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, /REPLACE TEXT: <HYPERION_HOME> ON LINE: 5/
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, /apps/Oracle/EPMSystem11R1/../jrockit_160_29/bin/java $TMP_ARGS -Duser.language=en_US -Xms512m -Xmx1024m -jar <USER_DIR>/wl/wls1036_generic.jar -mode=silent -silent_xml=<HYPERION_HOME>/tmp/wl_stage/silent.xml -log=<HYPERION_HOME>/diagnostics/logs/install/wl_install.log
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, /REPLACE TEXT: <HYPERION_HOME> ON LINE: 5/
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, /apps/Oracle/EPMSystem11R1/../jrockit_160_29/bin/java $TMP_ARGS -Duser.language=en_US -Xms512m -Xmx1024m -jar <USER_DIR>/wl/wls1036_generic.jar -mode=silent -silent_xml=/apps/Oracle/EPMSystem11R1/tmp/wl_stage/silent.xml -log=<HYPERION_HOME>/diagnostics/logs/install/wl_install.log
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, /REPLACE TEXT: <HYPERION_HOME> ON LINE: 5/
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, /apps/Oracle/EPMSystem11R1/../jrockit_160_29/bin/java $TMP_ARGS -Duser.language=en_US -Xms512m -Xmx1024m -jar <USER_DIR>/wl/wls1036_generic.jar -mode=silent -silent_xml=/apps/Oracle/EPMSystem11R1/tmp/wl_stage/silent.xml -log=/apps/Oracle/EPMSystem11R1/diagnostics/logs/install/wl_install.log
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, Reading in ASCII file /apps/Oracle/EPMSystem11R1/tmp/wl_stage/wl10_install.sh.
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, /REPLACE TEXT: <USER_DIR> ON LINE: 5/
(Oct 26, 2013 3:54:29 PM), Install, com.installshield.wizardx.ascii.ModifyFile, msg2, /apps/Oracle/EPMSystem11R1/../jrockit_160_29/bin/java $TMP_ARGS -Duser.language=en_US -Xms512m -Xmx1024m -jar /apps/Hyp_Dump/HypInstall/wl/wls1036_generic.jar -mode=silent -silent_xml=/apps/Oracle/EPMSystem11R1/tmp/wl_stage/silent.xml -log=/apps/Oracle/EPMSystem11R1/diagnostics/logs/install/wl_install.log
(Oct 26, 2013 3:55:11 PM), Install, com.installshield.product.actions.DeleteFile, dbg, File /apps/Oracle/EPMSystem11R1/common/SharedServices/11.1.2.0/lib/EPMIdentityAsserter.jar does not exist
(Oct 26, 2013 3:57:06 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Starting OCM initial setup..
(Oct 26, 2013 3:57:06 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Non-resolved OCM install location: /apps/Oracle/EPMSystem11R1/ccr
(Oct 26, 2013 3:57:06 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Resolved OCM install location: /apps/Oracle/EPMSystem11R1/ccr
(Oct 26, 2013 3:57:06 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Canonical OCM location: /apps/Oracle/EPMSystem11R1/ccr
(Oct 26, 2013 3:57:06 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Assembly UUIDs selected: webLogicCommonComponent[],essbaseProductCommonComponents[],commonComponents[],tools[],ocm[],essbase_services[Essbase],oracle_common[],staticContent[],productCommonComponents[],opmn[]
(Oct 26, 2013 3:57:06 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Waiting until webLogicCommonComponent installed
(Oct 26, 2013 3:57:06 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, assemblyStatus.webLogicCommonComponent: COMPLETED
(Oct 26, 2013 3:57:06 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Running: /apps/Oracle/EPMSystem11R1/ccr/bin/setupCCR -S EPMInstall -V 11.1.2.0 -s -d ...
(Oct 26, 2013 3:57:06 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Environment: [TERM=xterm, ORACLE_HOME=/apps/Oracle/EPMSystem11R1, SHLVL=2, JAVA_HOME=/apps/Oracle/jdk160_29, KDEDIRS=/usr, XFILESEARCHPATH=/usr/dt/app-defaults/%L/Dt, SSH_CLIENT=10.152.4.217 50858 22, MAIL=/var/spool/mail/Hypadmin, PWD=/apps/Hyp_Dump/HypInstall, HOSTNAME=advltpde01.adweag.local, SSH_TTY=/dev/pts/2, LOGNAME=Hypadmin, CVS_RSH=ssh, G_BROKEN_FILENAMES=1, _=/usr/bin/nohup, QTDIR=/usr/lib64/qt-3.3, NLSPATH=/usr/dt/lib/nls/msg/%L/%N.cat, LD_LIBRARY_PATH=/apps/Hyp_Dump/HypInstall/jre/linux64/1.6.0/lib/amd64/server:/apps/Hyp_Dump/HypInstall/jre/linux64/1.6.0/lib/amd64:/apps/Hyp_Dump/HypInstall/jre/linux64/1.6.0/../lib/amd64, SSH_CONNECTION=10.152.4.217 50858 10.150.21.36 22, OLDPWD=/apps/Hyp_Dump/HypInstall, SHELL=/bin/bash, HISTSIZE=1000, PATH=/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/Hypadmin/bin, QTINC=/usr/lib64/qt-3.3/include, DISPLAY=localhost:10.0, USER=Hypadmin, QTLIB=/usr/lib64/qt-3.3/lib, KDE_IS_PRELINKED=1, HOME=/home/Hypadmin, HISTCONTROL=ignoredups, LESSOPEN=|/usr/bin/lesspipe.sh %s, LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:mi=01;05;37;41:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.tbz=01;31:*.tbz2=01;31:*.bz=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=01;36:*.au=01;36:*.flac=01;36:*.mid=01;36:*.midi=01;36:*.mka=01;36:*.mp3=01;36:*.mpc=01;36:*.ogg=01;36:*.ra=01;36:*.wav=01;36:*.axa=01;36:*.oga=01;36:*.spx=01;36:*.xspf=01;36:, LANG=en_US.UTF-8]
(Oct 26, 2013 3:57:09 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, /apps/Oracle/EPMSystem11R1/ccr/bin/setupCCR -S EPMInstall -V 11.1.2.0 -s -d :
STDOUT:
STDERR:
Error encountered in package deployment.
Check the contents of the deployment log - /apps/Oracle/EPMSystem11R1/ccr/hosts/advltpde01.adweag.local/log/install-core-10-26-2013_15.57.07-28035.log
Exit code: 11
(Oct 26, 2013 3:57:09 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Running: /apps/Oracle/EPMSystem11R1/ccr/bin/configCCR -r ...
(Oct 26, 2013 3:57:09 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, Environment: [TERM=xterm, ORACLE_HOME=/apps/Oracle/EPMSystem11R1, SHLVL=2, JAVA_HOME=/apps/Oracle/jdk160_29, KDEDIRS=/usr, XFILESEARCHPATH=/usr/dt/app-defaults/%L/Dt, SSH_CLIENT=10.152.4.217 50858 22, MAIL=/var/spool/mail/Hypadmin, PWD=/apps/Hyp_Dump/HypInstall, HOSTNAME=advltpde01.adweag.local, SSH_TTY=/dev/pts/2, LOGNAME=Hypadmin, CVS_RSH=ssh, G_BROKEN_FILENAMES=1, _=/usr/bin/nohup, QTDIR=/usr/lib64/qt-3.3, NLSPATH=/usr/dt/lib/nls/msg/%L/%N.cat, LD_LIBRARY_PATH=/apps/Hyp_Dump/HypInstall/jre/linux64/1.6.0/lib/amd64/server:/apps/Hyp_Dump/HypInstall/jre/linux64/1.6.0/lib/amd64:/apps/Hyp_Dump/HypInstall/jre/linux64/1.6.0/../lib/amd64, SSH_CONNECTION=10.152.4.217 50858 10.150.21.36 22, OLDPWD=/apps/Hyp_Dump/HypInstall, SHELL=/bin/bash, HISTSIZE=1000, PATH=/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/Hypadmin/bin, QTINC=/usr/lib64/qt-3.3/include, DISPLAY=localhost:10.0, USER=Hypadmin, QTLIB=/usr/lib64/qt-3.3/lib, KDE_IS_PRELINKED=1, HOME=/home/Hypadmin, HISTCONTROL=ignoredups, LESSOPEN=|/usr/bin/lesspipe.sh %s, LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:mi=01;05;37;41:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.tbz=01;31:*.tbz2=01;31:*.bz=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=01;36:*.au=01;36:*.flac=01;36:*.mid=01;36:*.midi=01;36:*.mka=01;36:*.mp3=01;36:*.mpc=01;36:*.ogg=01;36:*.ra=01;36:*.wav=01;36:*.axa=01;36:*.oga=01;36:*.spx=01;36:*.xspf=01;36:, LANG=en_US.UTF-8]
(Oct 26, 2013 3:57:09 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, /apps/Oracle/EPMSystem11R1/ccr/bin/configCCR -r :
STDOUT:
STDERR:
sh: /apps/Oracle/EPMSystem11R1/ccr/bin/configCCR: No such file or directory
Exit code: 127
(Oct 26, 2013 3:57:09 PM), Install, com.hyperion.cis.OCMOracleHomeSetup, wrn, OCM installation check failed: /apps/Oracle/EPMSystem11R1/ccr/bin/configCCR does not exist
Appreciate a Quick help on this.

Have a read of "EPM v11.1.2.3 Installation Of Oracle Common Components Fails on Linux 64-bit Server (Doc ID 1567479.1)"
Cheers
John
http://john-goodwin.blogspot.com/

Common components install fails for Essbase Server in a distributed environment.

Hello all, I am trying to install essbase server(V 11.1.2.3) on Red hat Linux 6, 64 bit. Have already installed Foundation Services on Windows 2008. Nothing has been configured yet. On the Linux install, the install of the common components fails. I have looked around in the forums and also in Oracle Support(Doc ID 1360561.1) and looks like it is a known issue. There is discussion that this is because of a few rpm's missing on the linux server. However I could not find a definite answer as to what exact package it was or if it actually is a rpm issue in the first place. Could someone please throw light on what exactly is causing the issue and what exact package is required. Thanks.
BTW this is the error from common-ocm-install.log
(Jul 2, 2013 11:53:33 AM), Install, com.hyperion.cis.OCMOracleHomeSetup, dbg, /software/hyperion/EPMSystem11R1/ccr/bin/configCCR -r :
STDOUT:
STDERR:
sh: /software/hyperion/EPMSystem11R1/ccr/bin/configCCR: No such file or directory
Exit code: 127
And this is the error in installTool-install-stderr.log
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
at javax.swing.plaf.basic.BasicTreeUI.completeEditing(BasicTreeUI.java:2009)
at javax.swing.plaf.basic.BasicTreeUI.completeEditing(BasicTreeUI.java:1974)
at javax.swing.plaf.basic.BasicTreeUI$Handler.valueChanged(BasicTreeUI.java:3637)
at javax.swing.tree.DefaultTreeSelectionModel.fireValueChanged(DefaultTreeSelectionModel.java:629)
at javax.swing.tree.DefaultTreeSelectionModel.clearSelection(DefaultTreeSelectionModel.java:570)
at javax.swing.tree.VariableHeightLayoutCache.rebuild(VariableHeightLayoutCache.java:740)
at javax.swing.tree.VariableHeightLayoutCache.treeStructureChanged(VariableHeightLayoutCache.java:626)
at javax.swing.plaf.basic.BasicTreeUI$Handler.treeStructureChanged(BasicTreeUI.java:3824)
at com.hyperion.install.wizard.swing.FeatureTreeModel.fireStructureChanged(FeatureTreeModel.java:511)
at com.hyperion.install.wizard.swing.FeatureTreeModel.fireStructureChanged(FeatureTreeModel.java:520)
at com.hyperion.install.wizard.swing.TreeSelectionFieldSwingImpl$11.run(TreeSelectionFieldSwingImpl.java:311)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:641)
at java.awt.EventQueue.access$000(EventQueue.java:84)
at java.awt.EventQueue$1.run(EventQueue.java:602)
at java.awt.EventQueue$1.run(EventQueue.java:600)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:611)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Thanks,
Ted.

It will be because OCM is 32bit and requires the glibc 32bit packages.
Try running
yum install glibc-devel.i686 glibc.i686
Cheers
John
http://john-goodwin.blogspot.com/

Unable to Install the Common Components and Oracle HTTP Server

I am installing the Hyperion 11.1.2.1.0 in Linux 64 bit server..
I have done the downloading the files from 1to 7 for Foundation Services and Static client with all Essbase.
I have unziped the all into one folder and done the installation , but i am not able to install the Oracle HTTP serve and common components.even If i tired to configure the system showing the Below error...
*Launching the Hyperion Configuration Utility, please wait...*
*Running preconfig checks...*
*Running EPM_ORACLE_HOME check...*
*EPM_ORACLE_HOME environment variable value: /fcs/Oracle_Home/Middleware/EPMSystem11R1*
*JAVA_HOME environment variable value: /fcs/Oracle_Home/Middleware/EPMSystem11R1/../jdk160_21*
*EPM_ORACLE_HOME check succeeded*
*Running .oracle.products check... .oracle.products check succeeded*
*Running Jars manifest check...*
*Time spent for manifests parsing: 606 ms*
*Maximum jars depth achieved: 6, while restriction was: unrestricted*
*Parsed 419 manifests*
*Total jars and classpath entries encountered: 419*
*Total not-existing referenced classpath entries count: 62*
*Total classpath elements to check: 59*
*ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/oracle.jsf_1.2.9/glassfish.jstl_1.2.0.1.jar not exists; file depth: 2; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_j2se.jar referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
*ERROR: /fcs/Oracle_Home/Middleware/oracle_common/jlib/share.jar not exists; file depth: 1; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
*ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/oracle.http_client_11.1.1.jar not exists; file depth: 2; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_soa.jar referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
*ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/oracle.dms_11.1.1/dms.jar not exists; file depth: 2; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_j2se.jar referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
*ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/velocity-dep-1.4.jar not exists; file depth: 1; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
*ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxspi.jar not exists; file depth: 2; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_j2se.jar referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
*ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/org.apache.commons.beanutils_1.6.jar not exists; file depth: 1; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
*ERROR: /fcs/Oracle_Home/Middleware/oracle_common/jlib/jewt4.jar not exists; file depth: 1; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
*ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/args4j-2.0.9.jar not exists; file depth: 1; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
*ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/oracle.odl_11.1.1/ojdl.jar not exists; file depth: 2; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_j2se.jar referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
*ERROR: /fcs/Oracle_Home/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxframework.jar not exists; file depth: 2; referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_soa.jar referenced from /fcs/Oracle_Home/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar*
*FATAL ERROR: Jars manifest check failed with message "Some referenced jars do not exist"*
*Exiting in 30 seconds"*
Thanks in Advance
Rao.

It may be worth having a read of the following article on Oracle Support - "Epm 11.1.2 Config Tool Fatal Error: "Some Referenced Jars Do Not Exist" [ID 1175585.1]"
Cheers
John
http://john-goodwin.blogspot.com/

Summary report to show all the software components and version installed

We are using 64bit Windows 2003 and Hyperion Planning and Essbase in 2 separate servers. I am not sure whether Windows can have a summary report to show all the software components and version installed and show it is 32bit or 64bit version installed?
Thanks!

Refer steps here to delete SC file.:
http://support.apple.com/kb/TS2363
Then proceed to repair your QuickTime. START / CONTROL PANEL / ADD n REMOVE PROGRAMS / highlight QUICKTIME and click CHANGE then REPAIR.

When douwnloading adobe premier pro fails. Writes that the installation is complete, some optional components are not installed correctly. What to do?

When downloading Adobe Premier pro fails, write that the installation is complete, some optional components are not installed correctly. What to do?

check your install logs for the problem, http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html

SCOM 2012 Reporting Fails During Install

I am having issues installing the Reporting Module for SCOM 2012. Here is my environment:
Stand-alone SQL server with SQL 2012 (Default Instance and only is used for SCOM)
Reporting Services Installed and I am able to browse to the URL
Reader Account has access to both servers and both Report/OPM databases.
Stand-alone Management Server
Everything is running fine.
When I go to install Reporting on the SQL Server it fails during the Configuring Security phase and here are the logs:
Error:All retrys failed!!. Message:SetSRSSecurity Exception, now throwing:Cannot stop ReportServer service on computer '.'.
Error: :SetSRSSecurity failed: Threw Exception.Type: System.InvalidOperationException, Exception Error Code: 0x80131509, Exception.Message: Cannot stop ReportServer service on computer '.'.

I also see this error:
[12:50:50]: Error:
:StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingConfigurationHelper.ReportingConfiguration.ModifySRSServiceAccount(String userName, String userPassword, String sqlSRSServer, String srsServiceName, String sqlServerForSRSDatabase,
String srsDBName)
[12:50:50]: Warn:
:Message:SetSRSSecurity Exception Exception: The specified @job_name ('F5DDC431-93E3-41CF-8913-00EDFD457F99') does not exist.
The specified @job_name ('3AA30844-4417-479D-80EF-059C9CAAF84D') does not exist.
The specified @job_name ('A65C33A6-DC11-44AA-B8AD-077A7D94213D') does not exist.
The specified @job_name ('C9192EB7-87D8-475D-9826-100AF193F33F') does not exist.
The specified @job_name ('410DA81B-318F-4BD8-AA5B-14AC61AC82C3') does not exist.
The specified @job_name ('E26B57B7-72CE-449F-AA19-19B192CD10C0') does not exist.
The specified @job_name ('FF9BC31C-E6F9-4987-ABBC-1C20D41E0A7D') does not exist.
The specified @job_name ('BBE14DB5-E183-4F05-AC45-1CD147DD72BE') does not exist.
The specified @job_name ('D69172E5-4FD6-4FF2-9F98-1FA57C98B6B5') does not exist.
The specified @job_name ('566D3953-B305-43EC-9C08-2FA53CABA2FE') does not exist.
The specified @job_name ('B3D9B9B3-9C8A-4109-884B-36899D560A9B') does not exist.
The specified @job_name ('B47669F4-54A5-4F78-AEF4-40A9F40D9BC6') does not exist.
The specified @job_name ('97FA149B-5275-4A4D-A3C8-4E69B20C0D92') does not exist.
The specified @job_name ('86AEBFB5-CAA3-4D2A-859F-4E751B660257') does not exist.
The specified @job_name ('FE970B3F-D021-46A2-8387-4E989590A86D') does not exist.
The specified @job_name ('D6C2E45D-E677-4F2B-81AA-5103FB8E1B92') does not exist.
The specified @job_name ('7412F626-CAD9-48BE-8211-5145A3F51085') does not exist.
The specified @job_name ('17838236-691B-49D7-AD7C-553B1886AB58') does not exist.
The specified @job_name ('5445E14F-A22C-4014-9EB8-55C8BAF5A061') does not exist.
The specified @job_name ('C914C932-C350-404D-9CF4-575D108DDA82') does not exist.
The specified @job_name ('CB87B0AD-069A-4F07-BB62-580FBEF5C31B') does not exist.
The specified @job_name ('BC838396-DFE1-4BC5-8D24-58B194A7214E') does not exist.
The specified @job_name ('D58C71E8-A821-4A73-A0A7-5F5080BC6730') does not exist.
The specified @job_name ('49F42A35-15DA-4C9E-A95B-66F4040E139F') does not exist.
The specified @job_name ('F4F9400D-1212-4DD6-AAFF-671192BF2B25') does not exist.
The specified @job_name ('F0EFEFAA-F2D5-494E-B97E-6D075AC17F2F') does not exist.
The specified @job_name ('0721E6DF-0209-4874-B473-70E5026E8FF2') does not exist.
The specified @job_name ('B2AECE06-0F8F-4C5D-A04E-8148D8F6C255') does not exist.
The specified @job_name ('A9813C14-FB76-4461-80B9-8350CBE9E5BB') does not exist.
The specified @job_name ('71ABB496-3F2E-4D8D-8551-8650DBC45721') does not exist.
The specified @job_name ('EF1AAD40-47DA-41A2-A9F6-87A6AE140BB3') does not exist.
The specified @job_name ('B887666E-E580-427C-ADBA-8B605561E8E9') does not exist.
The specified @job_name ('A19772C9-CA88-455C-9CA7-8E11F960BB84') does not exist.
The specified @job_name ('CAFFEA4E-AE64-4B5F-9129-913272C5251D') does not exist.
The specified @job_name ('826AF562-C9D2-461B-AEEB-91B64FF3003A') does not exist.
The specified @job_name ('09458F97-C2ED-46B5-BB8E-91C4C54C22B4') does not exist.
The specified @job_name ('021AA26B-62EA-4C38-8ACF-975CE6B33FAD') does not exist.
The specified @job_name ('33EA5BB5-35A7-442F-8635-9FE560EDABBE') does not exist.
The specified @job_name ('E7405185-56A5-4C46-87AB-A1FA9FA4271B') does not exist.
The specified @job_name ('CEDDD21A-2E75-4BA6-BA99-A4E5B79073BC') does not exist.
The specified @job_name ('8A6E115B-616F-46D6-9A94-A7C22C94D11C') does not exist.
The specified @job_name ('30A0182B-0A70-4D33-A62F-AB277ABC4D63') does not exist.
The specified @job_name ('5B252CA0-FCFF-49FA-8B40-AD6667B345A1') does not exist.
The specified @job_name ('D0007E85-046E-4264-933A-AF662B8FECF7') does not exist.
The specified @job_name ('D1835177-4454-44C0-8134-B080AFD99B52') does not exist.
The specified @job_name ('B02F7A14-A658-420D-A2B0-B18577080FDD') does not exist.
The specified @job_name ('7CD641D9-C2C3-4907-88F9-BAED4FA93AAF') does not exist.
The specified @job_name ('23241CD1-4317-42EA-887E-C3F7441645D7') does not exist.
The specified @job_name ('9AB583BC-94AA-49BB-B4E4-CACE094A2764') does not exist.
The specified @job_name ('31EAC604-0DF5-4A9C-B510-CD6BEF72B608') does not exist.
The specified @job_name ('8412C87D-CC61-4FA0-9804-CFC8528DB66E') does not exist.
The specified @job_name ('314FBBDC-013B-4742-B65B-D122968AF014') does not exist.
The specified @job_name ('002B780F-351F-4345-9D97-D3DD370E2317') does not exist.
The specified @job_name ('F21C6C3D-5219-4917-BF29-D5AA1B315565') does not exist.
The specified @job_name ('34FCE497-498B-47EE-9A8B-D8EC2CFEC3AA') does not exist.
The specified @job_name ('1B356BC7-8300-4A6A-8E66-E036C1053C47') does not exist.
The specified @job_name ('6C94A462-3025-46AC-BD67-E7575ABBA4D9') does not exist.
The specified @job_name ('A79F3134-A3BC-470F-8D6C-F457C6114EBA') does not exist.

Vista/Adobe 9/sql image Error in Crystal Report:Failed to Export the Report

When I try to export my Crystal Report (v2008) from a Vista machine (using Crystal RDC export methods) as a PDF, I get the following error:
Error in Crystal Report: Failed to export the report.
This only happens when a particular subreport (that contains a sql image) prints (based on an input parameter). We have other subreports (within this same report) that print a sql image just fine. But, when this subreport prints, the above error appears.
I can run the same report on an XP machine without error.
Exportmodeller.dll and crtsv.dll are both installed and registered to the
C:\Program Files\Common Files\Business Objects\3.0\bin folder
I have tried opening the report, removing the image, and then adding it back in again to the subreport.
Still receive the same error.
Any suggestions?

>
Don Williams wrote:
> RDC is no longer shipped in CR 2008. You are using the embedded designer used within the Visual Studio .NET IDE and is not licensed for distribution.
>
> Upgrade to the .NET components and post your question to the .NET forums.
>
> Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.
Don,
Can you please clarify?
Our VB6 app that uses Crystal XI RDC runtime components. Our Crystal reports are edited in CR2008 SP1 developer edition (not through the VB.NET embedded report designer). We have deployed the CRXIRelease 2 runtime components (via the merge module) to our client machines in order to execute the RDC.
We can print/preview/export to excel, but the pdf creation is failing with this error.
We are only using the RDC (which we know is no longer supported) because of huge issues with the Crystal for .NET methods we are having with our customers (I have an active case for this issue). Therefore, we have to rollback our .NET product and revert to the RDC code.
Vista is failing to create a PDF for a report developed in the CR2008 SP1 developer edition when using the RDC.
When you say "Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.", what do you mean by "will not work in CR2008"?
Thank you

"Load report failed" error with VS 2010 upgrade

I have a report system that has been running nicely for a few years. Today, I upgraded it to use the latest Crystal from Visual Studio 2010. I installed the .net framework 4.0, installed the Crystal runtime (64 bit), and updated the web site with slightly revised code to use the new stuff. Now, reports that worked yesterday fail with the 'load report failed' error. A little research shows that the file name passed to the report engine is correct (and is the same as it has always been). I see that rpt files are being created in windows\temp each time a report is requested, so it seems that the report file is being found.
The code change I made was to use the new ExportToHttpResponse method.
When deployed in development and test environments (both 32 bit). this worked perfectly. In production, however, no such luck. I wonder if I have missed a setting somewhere, or if there is something extra to do on a 64 bit server?
Does anyone have a clue for me?
More info - I found the following error in the event log:
The keycode assembly, BusinessObjects.Licensing.KeycodeDecoder.dll, cannot be loaded.
... which I thought was interesting until I noticed the same error occurs on my dev machine, where the reports are working.
I also used process monitor to check the dlls loaded on the production box, and they all seem to be the latest version. I tried using the 'modules' utility on my production box, but it did not pick up the Crystal stuff (or any of my web stuff - I wonder if it is a 32-bit only tool?).
Edited by: Ray Novak on Dec 29, 2010 5:12 PM

I just tried this again with the same result. I uninstalled the previous Crystal, deleted all the old folders and reg keys I could find, then installed the new 64 bit redist package. I asigned permissions to the SAP reg key tree. I ended up with the same result: "Invalid file name". There were new files created in the temp folder for each report request, so I can tell that my.rpt files are being found.
I used process monitor to see what was happening, and here are the results that seem interesting:
RegOpenKey     HKU\.DEFAULT\Software\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0     NAME NOT FOUND
RegOpenKey     HKU\.DEFAULT\Software\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0     NAME NOT FOUND
IRP_MJ_CREATE     C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64\secSSO.dll.2.Config     NAME NOT FOUND
FASTIO_NETWORK_QUERY_OPEN     C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64\SmAgentAPI.dll     NAME NOT FOUND
Since it seemed to be trying to create files in the \win64_x64 folder, I allowed the process full access, but it didn't help. It was also looking for SmAgentAPI.dll which does not seem to exist on my system.

Load report failed error at setdatabaselogon

I have a machine that is getting the error 'load report failed' which is happening at the setdatabaselogon command in the VB.NET module i'm using. Sometimes it does it sometimes it doesn't!!
Anyone know of any reason why this would happen?

I just tried this again with the same result. I uninstalled the previous Crystal, deleted all the old folders and reg keys I could find, then installed the new 64 bit redist package. I asigned permissions to the SAP reg key tree. I ended up with the same result: "Invalid file name". There were new files created in the temp folder for each report request, so I can tell that my.rpt files are being found.
I used process monitor to see what was happening, and here are the results that seem interesting:
RegOpenKey     HKU\.DEFAULT\Software\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0     NAME NOT FOUND
RegOpenKey     HKU\.DEFAULT\Software\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0     NAME NOT FOUND
IRP_MJ_CREATE     C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64\secSSO.dll.2.Config     NAME NOT FOUND
FASTIO_NETWORK_QUERY_OPEN     C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64\SmAgentAPI.dll     NAME NOT FOUND
Since it seemed to be trying to create files in the \win64_x64 folder, I allowed the process full access, but it didn't help. It was also looking for SmAgentAPI.dll which does not seem to exist on my system.

Error in report generation-Load report failed

I have installed crystal reports for VS2005 runtime in my live environment.When i try to load the report file from a .Net page i am getting the error'Error in Report generation-Load report failed'.
This works fine in development and testing but when moved to production we are having issues.
I believe i have a workaround i.e i need to open the rpt in a VS 2005 environment and re-write the connection string again.This fix had worked in development and testing when we had the same issue.
But not sure if this is a known issue with crystal reports and if so do we have any hot fixes for the same.
Please help.

Hi Don,
The reason why i posted the item on 'data Connectivity issues' is because i suspect the problem is with the connection string.Though i had provided the correct connection string,re-writing the connection string with the same info might help to fix the issue with loading the report.
Does it mean that there is a problem in the connectivity?
I have a risk here that i cant re-write the connection string..i.e to open the RPT file in VS2005 and bind it.The production web server & database server sits in a third party environment and it is not in the company network.So i cant connect to this server to re-write from any other severs in the network.
Is there any fix which can applied to the server to get this issue resolved?
Cheers
Nithya.

Crystal Reports with VS2005 - Load Report failed Error....

Post Author: rajeshvijayan
CA Forum: Older Products
Hi,
I am running Crystal Reports viewer on IIS6.0 and windows server 2003, which was installed using the redistributable package that comes along with Visual Studio 2005. We open these reports through a web based application 1 which is run on a different application pool on IIS. We have about 3 to 4 other web applications runing on the same IIS. All the other Web applications are working fine.
This web application 1 has 2 parts - one is the normal data display quiries from the back end SQL server 2005 and the other is the Crystal Reports which also quires data from SQL Server 2005. At times i find that these reports all of them throw an error - Load Report Failed. At the same time the Part 1 of this application does work fine in showing the data that is queried from the database. Moreover at this stage, I dont find any errors in the Event viewer. If i restart this application pool alone, the reports starts working fine again.
I had gone through a few of the news groups and have made all the necessary permission related changes like the TEMP Folder, ASP.NET temporary folder, the folder in which the crystal reports is placed etc but still the same error throws up after some point in time. Wanted to know if there is any special configuration required on the Application pool when it comes to Crystal Reports. We have bout 10 to 15 users using this application for testing and it only throws this error at times and not always.
Looking forward to any kind of solution from your side.
Regards
Rajesh

Post Author: mikeeby
CA Forum: Deployment
Yes I too have been fighting this problem. I was using a XML Data file and schema file for my u201Cdatabase templateu201D in the report. I would then run my query using the .NET SQLClient then fill the report with my dataset table using the SetDataSource method from the ReportDocument object.
I tried both embedded and runtime loaded reports all worked fine on my development machine but would NOT work on my production server. I use all the server installs, played with user rights, registering DLLu2019s still nothing. I went as far as creating a winform app to fix the problem. I then had exactly the same problem, I was catching the error and it originated from the viewer control in both winform and webforms.
What finally worked for me was to attach to the database using OLE DB instead of XML/schema (xml/xsd) datasource then pasting my SQL Query into the database connection command this gave me the fields to build the report. I actually used the u201CSet Database Locationu201D Dialog in Crystal Reports so I didnu2019t have to redesign my report. This dialog works very weird but I managed to figure it out. I then used an embedded report and all seem to be well. I think there is a problem with the Crystal Reports .NET Server Install and Merge Modules used with .NET with XML files, but I cannot be sure, all I know is this worked for me.
I am concerned that if my database server is moved or renamed my report might break because the server connection is embedded in the report, but for right now it is working. I thought that was the reason for using the xsd file was to eliminate the dependence on a server connection in the report.
Good luck and I hope this helps you fix your problem too. If it does please let me know I have see so many reports of people asking questions about this problem and it seems like most are left hanging.
Mike

Issue with Shared Components - Report Layouts Download

After my isp provider upgraded from APEX 3.2.1 to 4.0, I am now unable to go into the Shared Components -> Report Layouts section and access an existing report to download my rtf template. Is there another way to go and get this out of the database. I need to update a report layout that is old and I do not have a backup of the original report and do not want to spend the time to recreate.
Thanks,
Mark

If you have TOAD, or if you can install it, by connecting to your database you will be able to access your report layout via the Schema Browser. The whole path should be "All Schemas -> APEX_040000 -> Tables -> WWV_FLOW_REPORT_LAYOUTS". In that table you will find you report layout. Double click on it and copy/paste it into a text editor.
Note: You might need to be granted some rights to access the 400+ tables of the APEX_040000 schema. Or if you have a DBA, ask him to do this for you.
Of course, if you don't want to install TOAD, I bet you could query that table from the SQL Commands of the SQL Workshop, but you would again need the rights to access said table.
Best regards,
Mathieu

Reports fail when run against a different data source

Hello,
We have a VB.NET 2008 WinForms application running on Microsoft .NET 3.5. We are using Crystal Reports 2008 runtime, service pack 3 -- using the CrystalDecisions.Windows.Forms.CrystalReportViewer in the app to view reports. In the GAC on all our client computers, we have versions 12.0.1100.0 and 12.0.2000.0 of CrystalDecisions.CrystalReports.Engine, CrystalDecisions.Shared, and CrystalDecisions.Windows.Forms.
Please refer to another one of our posted forum issues, u201CCritical issue since upgrading from CR9 to CR2008u201D, as these issues seem to be related:
Critical issue since upgrading from CR9 to CR2008
We were concerned with report display slow down, and we seemed to have solved this by using the Oracle Server driver (instead of either Microsoft's or Oracle's OLEDB driver). But now we must find a resolution to another piece of the puzzle, which is: why does a report break if one data source is embedded in the .rpt file is different than the one you are trying to run the report against, in the .NET Viewer?
Problem:
If you have a production database name (e.g. "ProdDB") embedded in your .rpt file that you built your report from and try to run that report against a development database (e.g. "DevDB") (OR VICE VERSA -- it is the switch that is the important concept here), the report fails with a list of messages such as this:
    Failed to retrieve data from the database
    Details: [Database vendor code: 6550 ]
This only seems to happen if the source of the report data (i.e. the underlying query) is an Oracle stored procedure or a Crystal Reports SQL Command -- the reports run fine against all data sources if the source is a table or a view). In trying different things to troubleshoot this, including adding a ReportDocument.VerifyDatabase() call after setting the connection information, the Crystal Reports viewer will spit out other nonsensical errers regarding being unable to find certain fields (e.g. "The field name is not known), or not able to find the table (even though the source data should be coming from an Oracle stored procedure, not a table).
When the reports are run in the Crystal Reports Designer, they run fine no matter what database is being used; but the problem only happens while being run in the .NET viewer. It's almost as if something internally isn't getting fully "set" to the new data source, or something -- we're really grasping at straws here.
For the sake of completeness of information, here is how we're setting the connection information
        '-- Set database connection info for the main report
        For Each oConnectionInfo In oCrystalReport.DataSourceConnections
            oConnectionInfo.SetConnection(gsDBDataSource, "", gsDBUserID, gsDBPassword)
        Next oConnectionInfo
        '-- Set database connection info for each subreport
        For Each oSubreport In oCrystalReport.Subreports
            For Each oConnectionInfo In oSubreport.DataSourceConnections
                oConnectionInfo.SetConnection(gsDBDataSource, "", gsDBUserID, gsDBPassword)
            Next oConnectionInfo
        Next oSubreport
... but in troubleshooting, we've even tried an "overkill" approach and added this code as well:
        '-- Set database connection info for each table in the main report
        For Each oTable In oCrystalReport.Database.Tables
            With oTable.LogOnInfo.ConnectionInfo
                .ServerName = gsDBDataSource
                .UserID = gsDBUserID
                .Password = gsDBPassword
                For Each oPair In .LogonProperties
                    If UCase(CStr(oPair.Name)) = "DATA SOURCE" Then
                        oPair.Value = gsDBDataSource
                        Exit For
                    End If
                Next oPair
            End With
            oTable.ApplyLogOnInfo(oTable.LogOnInfo)
        Next oTable
        '-- Set database connection info for each table in each subreport
        For Each oSubreport In oCrystalReport.Subreports
            For Each oTable In oSubreport.Database.Tables
                With oTable.LogOnInfo.ConnectionInfo
                    .ServerName = gsDBDataSource
                    .UserID = gsDBUserID
                    .Password = gsDBPassword
                    For Each oPair In .LogonProperties
                        If UCase(CStr(oPair.Name)) = "DATA SOURCE" Then
                            oPair.Value = gsDBDataSource
                            Exit For
                        End If
                    Next oPair
                End With
                oTable.ApplyLogOnInfo(oTable.LogOnInfo)
            Next oTable
        Next oSubreport
... alas, it makes no difference. If we run the report against a database that is different than the one specified with "Set Datasource Location" in Crystal, it fails with nonsense errors

Thanks for the reply, Ludek. We have made some breakthroughs, uncovered some Crystal bugs and workarounds, and we're probably 90% there I hope.
For your first point, unfortunately the information on the Oracle 6550 error was generic, and not much help in our case. And for your second point, the errors didn't have anything to do with subreports at that time -- the error would manifest itself even in a simple, one-level report.
However, your third point (pointing us to KB 1553921) helped move us forward quite a bit more. For the benefit of all, here is a link to that KB article:
Link: [KB 1553921|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533353333333933323331%7D.do]
We downloaded the tool referenced there, and pointed it at a couple of our reports. The bottom line is that the code it generated uses a completely new area of the Crystal Reports .NET API which we had not used before -- in the CrystalDecisions.ReportAppServer namespace. Using code based on what that RasConnectionInfo tool generated, we were able gain greater visibility into some of the objects in the API and to uncover what I think qualifies as a genuine bug in Crystal Reports.
The CrystalDecisions.ReportAppServer.DataDefModel.ISCRTable class exposes a property called QualifiedName, something that isn't exposed by the more commonly-used CrystalDecisions.CrystalReports.Engine.Table class. When changing the data source with our old code referenced above (CrystalDecisions.Shared.ConnectionInfo.SetConnection), I saw that Crystal would actually change the Table.QualifiedName from something like "SCHEMAOWNER.PACKAGENAME.PROCNAME" to just "PROCNAME" (essentially stripping off the schema and package name). Bad, Crystal... VERY BAD! IMHO, Crystal potentially deserves to be swatted on the a** with the proverbial rolled-up newspaper.
I believe this explains why we were also able to generate errors indicating that field names or tables were not found -- because Crystal had gone and changed the QualifiedName to remove some key info identifying the database object! So, knowing this and using the code generated by the RasConnectionInfo tool, we were able to work around this bug with code that worked for most of our reports ("most" is the key word here -- more on that in a bit).
So, first of all, I'll post our new code. Here is the main area where we loop through all of the tables in the report and subreports:
'-- Replace each table in the main report with new connection info
For Each oTable In oCrystalReport.ReportClientDocument.DatabaseController.Database.Tables
    oNewTable = oTable.Clone()
    oNewTable.ConnectionInfo = GetNewConnectionInfo(oTable)
    oCrystalReport.ReportClientDocument.DatabaseController.SetTableLocation(oTable, oNewTable)
Next oTable
'-- Replace each table in any subreports with new connection info
For iLoop = 0 To oCrystalReport.Subreports.Count - 1
    sSubreportName = oCrystalReport.Subreports(iLoop).Name
    For Each oTable In oCrystalReport.ReportClientDocument.SubreportController.GetSubreportDatabase(sSubreportName).Tables
        oNewTable = oTable.Clone()
        oNewTable.ConnectionInfo = GetNewConnectionInfo(oTable)
        oCrystalReport.ReportClientDocument.SubreportController.SetTableLocation(sSubreportName, oTable, oNewTable)
    Next oTable
Next iLoop
'-- Call VerifyDatabase() to ensure that the tables update properly
oCrystalReport.VerifyDatabase()
(Thanks to Colin Stynes for his post in the following thread, which describes how to handle the subreports):
Setting subreport connection info at runtime
There seems to be a limitation on the number of characters in a post on this forum (before all formatting gets lost), so please see my next post for the rest....

Runtime v13.0.6.1027 causing Load Report Failed on Citrix Receiver v13.4.0.25

With the installation of SP6 runtime, our clients that connect via Citrix are getting the following Load Report Failed message:
In order to fix, they must change their Citrix Connection Session Security for Files to Full Access. And, apparently, even if this Files setting is correct, they still cannot create files on the root of their C: drive, so they must create a new folder on their C: dirve and save any files to that folder.
I saw this discussion Crystal report error while loading the file and Don stated:
"Hello,
It's exactly what it says, the path to the report is not correct, user does not have permission to it or it simply doesn't exist.
Check Citrix's Forum, there are known issues with it and CR.
Don"
Prior to our upgrade to V13.0.6.1027, we we used the Crystal 2008 runtime components to run reports, and had no issue. Why, with this version of runtime does the access change? We have many citrix users, and this has become a critical issue.
Can you please point me to the specific forum that states the known issues with Citrix and CR?
Thank you

I never checked myself but because it a Citrix issue you should ask Citrix for help. They are familiar with permission issues and configurations.
If you run CR on your desktop it works...
Don

Common Components reporting 'Failed' installing 11.1.2.1 on 2008 R2 64-bit

Similar Messages

Maybe you are looking for