Common Criteria and 10.5

Apple's Common Criteria Tools (see http://www.apple.com/support/security/commoncriteria/) do not work under 10.5. Loading the 10.4 tools under 10.5 causes the system to be unbootable, requiring a system re-install.
Does anyone know if/when the 10.5 Common Criteria Toolset will be available?
FYI, these tools are security related.
Thanks

Similar Messages

Oracle 9i - Common Criteria Evaluated Configuration

I see Oracle9i (9.2.0.1.0) has successfully completed evaluation (http://www.cesg.gov.uk/site/iacs/index.cfm?menuSelected=1&displayPage=152&id=269). Oracle have missed a trick as their evaluated edition page does not show this yet.
The security target and certification reports both refer to "Evaluated Configuration Document for Oracle9i Release 9.2.0, Oracle Corporation" to be read inconjunction with the reports. Is this document available for download? I cannot find it in the Documentation repository. Any help in obtaining this would be most appreciated.
Regards,
Kevin Sloan
Rural Payments Agency
United Kingdom

what you need is: Cisco Adaptive Security Appliance (ASA) Firewall & Virtual Private Network (VPN) Platform Preparative Procedures & Operational User Guide Version 0.8 April 2011 This document describes how to install and configure the Cisco ASA 5500 Series Adaptive Security Appliance (ASA) running software version 8.3.2 as certified by Common Criteria Evaluation Assurance Level 4 (EAL4). i got a pdf from Ashit Vora, Cisco Systems, Inc., Cisco Global Certifications Team – Manager, FIPS/CC eliot robinson sterling national bank [email protected]

ASA5510 - Common Criteria EAL4 configuration

Hello,
I'm trying to track down the installation and configuration procedures for the common criteria EAL4 evaluated ASA5510 but not having any joy.
The ASA Release 8.3.2 certification report (http://www.commoncriteriaportal.org/files/epfiles/st_vid10381-vr.pdf , Page 18) identifies the required configuration documentation as the "Cisco Adaptive Security Appliances (ASA) Firewall and Virtual Private Network (VPN) Platform Common Criteria Operational User Guidance and Preparative Procedures" but I can not find any reference to this on the Cisco web site.
So far I've only been able to locate the proceedures for the older 7.0 release. http://www.cisco.com/en/US/docs/security/asa/asa70/hw/eal4/asaeal4.html
Grateful if anyone is able to help locate the correct documentation needed to configure an ASA5510 to achieve the common criteria EAL4 evaluated configuration.
Many thanks,
Dominic

what you need is: Cisco Adaptive Security Appliance (ASA) Firewall & Virtual Private Network (VPN) Platform Preparative Procedures & Operational User Guide Version 0.8 April 2011 This document describes how to install and configure the Cisco ASA 5500 Series Adaptive Security Appliance (ASA) running software version 8.3.2 as certified by Common Criteria Evaluation Assurance Level 4 (EAL4). i got a pdf from Ashit Vora, Cisco Systems, Inc., Cisco Global Certifications Team – Manager, FIPS/CC eliot robinson sterling national bank [email protected]

When I enable imatch on my iPhone 4s it takes approximately 30 minutes before other data fills 13.2gb of usable data. This problem does not occur when I manually sync music to my phone. Is this a common bug, and if so; is there a fix?

When I enable imatch on my iPhone 4s it takes approximately 30 minutes before other data fills 13.2gb of usable data on the phone. This problem does not occur when I manually sync music to my phone only when I access imatch. Is this a common bug, and if so; is there a fix?

yes it is. you can sign out of itunes account then sign back in. use http://support.apple.com/kb/ht1311 to sign out.

Common headers and footers in web applications

I want to include common headers and footers in all web applications. I do not want to include the header/footer in each application WAR file. I've tried to follow Orion's tutorial for building a response filter, and I get it working to the point that the header and footer show up on the page, but no other content shows up.
Has anyone used filters to include static headers and footers in web applications?
And is there an easier way to do this, that I'm not seeing??

Hi Anu,
I have already gone through the document. In that i dint find anything related to headers and footers.Only thing that is available is sorting the dimension headers.
Please let me know if you have any other info regarding this.
Thanks & Regards
Ambica Atluri

View criteria and LOVs

Hi I am very new to ADF and just getting started on view criteria and LOVs. Is it possible to create a query panel and table such that in the search section the fields have drop down boxes or select many shuttles ? Right now what ever criteria i give is coming as only text boxes. I want for some fields there must be values retrieved from database and shown as drop down list and for another field I need it to be shown as SelectManyShuttle.
Any suggestions or examples should be helpful.
Thanks,
Ravi.

Hi Ravi,
Sure, there is a way to do this. The attributes in your ViewCriteria should have LOV defined on them to show dropdown list for that attribute. When you include that attribute in your VC, it will show as selectOneChoice or whatever you have defined the LOV as.
This might help:
http://docs.oracle.com/cd/E23943_01/web.1111/b31974/web_search_bc.htm
Thanks.
-Nirav

TS1362 I am having trouble playing imported cds. The tracks keep sticking which is a bit like buffering is this a common problem and can i rectify it.

Being new to the iphone I am having trouble listening to imported cds. The tracks keep sticking a bit like buffering. Is this a common problem and can it be solved just by addressing a general buffering problem which I already have on youtube but have not rectified as yet.
Thanks Kaz T

If <alanfromnewtownards> fix fails to address the issue - turn off iMessage and Facetime in Settings. Settings\iMessage, and Settings\facetime.
Sync by cable to iTunes.
Leave cable connected, open Settings\iCloud and ensure at least Mail is on and dsplays your Apple iD email - then turn iMessage and Facetime back on. Ensure that in the ISettings...\iMessage...\Facetime page that the Receive at field and Receive video calls at email address is the same address as your Apple I.D.
Resync when finished.
If still having problems with Facetime then check that the required port is open - allowing traffic in your router.
http://support.apple.com/kb/TS1629
In some cases you may need to turn on Port forwarding and open the port manually to allow traffic through. See your router documentation for details.
If having problems verifying, open iTunes store App on your pad. at bottom of page, click on your ID and sign in. Go to your Account details (re-veryfying and answering security questions may be required to do this) - check all details are correct.
Finally right click your device icon in iTunes and select Reset warnings. resync when finished.
Ct

KE28 - Selection Criteria and Processing

Hello Expert,
we will need, when we are executing transacction ke28 that it runs this process excluding some products or
this does not consider some records
I review some recomendations but I dont found one solution.
1.   http://scn.sap.com/thread/607526
2.   http://scn.sap.com/thread/1887453
3.   http://scn.sap.com/thread/1707542
4.   Example: Selection Criteria and Processing Instructions - Profitability Analysis (COPA) - SAP Library
5.   77476 - Information: top-down planning
6.   1928710 - KE28 enhancements (this note oss not apply in SAP ECC 6.0)
7.   1933479 - KE28: Enhancements (this note oss not apply in SAP ECC 6.0)
I try explain:
Actual data:
From period 001.2014
Record type 1.
Reference data
From period 001.2014
Version
Record type Z, B.
1.     Top-Down Distribution:Processing Instruccions
Int this point it cant use options (DLvl and Sum) when it use range because:
This processing rule is not allowed for the characteristic
Procedure
Select either "Retain" or "Copy to" for characteristics for which you have specified characteristic values.
For characteristic that you want to summarize or distribute ("Summarize" or "Distribution level" button), you must enter an asterisk (*) on the "Selection Criteria" screen.
=> In this case, it use optios CPY.
2.     Selection Criteria (Characteristic)
         => In this case here, it consider characteristic values and excluding values.
Finally:   it not get good result because it not distribute.!!
Then, ¿is it possible excluding records from derivation rule?
¿is there any exit in COPA for ke28?
For example ¿is it possible excluding records from exit COPA0001 ?
All your recomendations w ill be w elcome.
Many thanks for your support and recomendations.
Best regards,

Dear Sap Expert,
All your recomendations will be welcome.
I try explain the following scenary:
This is actual data real (Record type Z, B from COPA) and it has only version 0.
Not plan and it does not use planning layouts or reports.
Example:
Client
Material
Product
Sub Line
C1
M1
P1
L1
C2
M1
P1
L1
C3
M3
P2
L2
C4
M4
P3
L3
C5
M5
P4
L4 (Excluding this records or Line)
C5
M6
P5
L4 (Excluding this records or Line)
The following entries are made on the screen 'Selection criteria':
Characteristic       Characteristic value
Society CO                      *
Material                            *
Product                            *
Client                                *
Sub líneas                     L1,L2,L3
The following entries are made on the screen 'Processing rules':
Characteristic
Distribution level
Transfer
Summarize
Society CO
X
Material
X
Product
X
Client
X
Sub líneas
X
When we run trasacction ke28 then the result is not good because it does not distribute nothing.
But
when we change “selection criteria”
Characteristic      characteristic value:
Sub línea                *
The result is ok and distribute!
¿How does we exclude some records?
Could you explain better this distribution using only transaction ke28, please? or Could you give me other note oss about distribution KE28, please?
Many thanks for your support and recomendations.
Best regards,
a

Sharing common libraries and ejbs between multiple ears

Hi
I have been going through various articles at O'Reilly and discussions at serverside
(some outdated) on the packaging options in J2EE.
http://www.onjava.com/pub/a/onjava/2001/06/26/ejb.html?page=2
http://www.onjava.com/pub/a/onjava/2001/07/25/ejb.html
http://www2.theserverside.com/home/thread.jsp?thread_id=7530
I am still undecided as to what is the best way to package and deploy
- a set of EJBs (Stateless Session beans) and
- utility libraries
that need to be shared by multiple ears.
We have a set of components - 4 session ejbs and 15 utility classes like log4java,
xerces, custom utilities etc... which need to be shared by all applications running
on the server (in a clustered environment).
There are over 22 applications and these will be packaged in individual ear files.
If we choose to put the common EJBs and utilities in each of the application's
ear, then for every change to this common library all the applications will need
to be repackaged and redeployed, which obviously is not desirable.
If we choose to use the 'Class-Path' option in manifest file, from what I understand
the path to be specified is a relative path within the ear i.e. the path cannot
point to archives outside the .ear file, which does not serve our purpose. Am
I right in this understanding?
What is the best way to package and deploy these common components under these
circumstances?
Has anybody tried something like this before?
Would appreciate your comments on this.
Thank you.

"Kumar" <[email protected]> wrote in message
news:[email protected]...
In My opinion,
I would be packaging the all utilities into a single jar file and be using
in the application server class path directly. whenever I want to change
this jar file I can change at one shot and package this jar file and keepit
in the classpath again. This works very well, if and only if each EAR file
is not using its own version of a libary of utility jar file. All earfiles
should be using a single and common library.In this case when you update the .jar file, you would have to restart the
server. I am not aware of any good solution which alleviates this.
>
If I include this utility jar file into all ear files, the following arethe
difficulties we need to handle in the future.
- What if utility library has been changed frequently, it leads to
re-package all .ears and re-deployment
- Unnecessarily adding a copy of a single jar file to all ear files,
increases complexity
- Any new application needed to be deployed, again which uses utility, we
need add the utility jar file to ear file
- There is no logical separation and simplicity
Thanks
Kumar
"Kiran P" <[email protected]> wrote in message
news:[email protected]...
Hi
I have been going through various articles at O'Reilly and discussions
at
serverside
(some outdated) on the packaging options in J2EE.
http://www.onjava.com/pub/a/onjava/2001/06/26/ejb.html?page=2
http://www.onjava.com/pub/a/onjava/2001/07/25/ejb.html
http://www2.theserverside.com/home/thread.jsp?thread_id=7530
I am still undecided as to what is the best way to package and deploy
- a set of EJBs (Stateless Session beans) and
- utility libraries
that need to be shared by multiple ears.
We have a set of components - 4 session ejbs and 15 utility classes likelog4java,
xerces, custom utilities etc... which need to be shared by allapplications running
on the server (in a clustered environment).
There are over 22 applications and these will be packaged in individualear files.
If we choose to put the common EJBs and utilities in each of theapplication's
ear, then for every change to this common library all the applicationswill need
to be repackaged and redeployed, which obviously is not desirable.
If we choose to use the 'Class-Path' option in manifest file, from what
I
understand
the path to be specified is a relative path within the ear i.e. the pathcannot
point to archives outside the .ear file, which does not serve our
purpose.
Am
I right in this understanding?
What is the best way to package and deploy these common components underthese
circumstances?
Has anybody tried something like this before?
Would appreciate your comments on this.
Thank you.

Common diemsions and more then one fact table join problem

Hi,
I have 5 common dimension and 3 fact table which in the same subject area. When I want to display results from more then one fact table sending database then query more then one and I think BI server join this two different result on OBI server. But I think if obi server sending database query for exp. WITH SAWITH0 .... the results get effective.
+++002002:2ea0000:2ea000f:----2009/03/14 10:12:59
-------------------- SQL Request:
SET VARIABLE QUERY_SRC_CD='Report';SELECT "- Common Dimensions"."Year Month" saw_0, "- Subs. Tariff"."Subscriber Current Tariff Type" saw_1, "- Common Measures".Arpu saw_2, "- Common Measures"."Gross Margin" saw_3, "- Call Out"."Callout Dur" saw_4, "- Case".Case_Info_Num saw_5 FROM "CUSTOMER PROFILING" WHERE ("- Common Dimensions"."Year Month" = 200901) AND ("- Subs. Tariff"."Subscriber Current Tariff Type" = 'PREPAID') ORDER BY saw_0, saw_1
+++002002:2ea0000:2ea000f:----2009/03/14 10:12:59
-------------------- General Query Info:
Repository: Star, Subject Area: CUSTOMER PROFILING REV, Presentation: CUSTOMER PROFILING
+++002002:2ea0000:2ea000f:----2009/03/14 10:13:00
-------------------- Sending query to database named CENTRAVEA (id: <<471777>>):
select T223282.DIM_TIME_MONTH_ID as c1,
T221204.DIM_SUBS_CURRENT_TARIFF_TYPE as c2,
avg(T223490.FACT_CP_ARPU) as c3,
sum(T223490.FACT_CP_GROSS_MARGIN) as c4,
sum(T223490.FACT_CP_CO_DUR) as c5
from
DM.DIM_SUBSCRIBER T221204 /* A_DIM_SUBSCRIBER */ ,
DM.DIM_TIME_MONTH T223282 /* A_DIM_TIME_MONTH */ ,
DM.FACT_CUST_PROFILING_PART3 T223490 /* A_FACT_CUST_PROFILING_PART3 */
where ( T221204.DIM_SUBS_ID = T223490.DIM_SUBS_ID and T221204.DIM_SUBS_CURRENT_TARIFF_TYPE = 'PREPAID' and T223282.DIM_TIME_MONTH_ID = T223490.DIM_TIME_MONTH_ID and T223282.DIM_TIME_MONTH_ID = 200901 and T223490.DIM_TIME_MONTH_ID = 200901 )
group by T221204.DIM_SUBS_CURRENT_TARIFF_TYPE, T223282.DIM_TIME_MONTH_ID
order by c1, c2
+++002002:2ea0000:2ea000f:----2009/03/14 10:13:00
-------------------- Sending query to database named CENTRAVEA (id: <<471881>>):
select T223282.DIM_TIME_MONTH_ID as c1,
T221204.DIM_SUBS_CURRENT_TARIFF_TYPE as c2,
sum(T223294.FACT_CP_CASE_INFO_NO) as c3
from
DM.DIM_SUBSCRIBER T221204 /* A_DIM_SUBSCRIBER */ ,
DM.DIM_TIME_MONTH T223282 /* A_DIM_TIME_MONTH */ ,
DM.FACT_CUST_PROFILING_PART1 T223294 /* A_FACT_CUST_PROFILING_PART1 */
where ( T221204.DIM_SUBS_ID = T223294.DIM_SUBS_ID and T221204.DIM_SUBS_CURRENT_TARIFF_TYPE = 'PREPAID' and T223282.DIM_TIME_MONTH_ID = T223294.DIM_TIME_MONTH_ID and T223282.DIM_TIME_MONTH_ID = 200901 and T223294.DIM_TIME_MONTH_ID = 200901 )
group by T221204.DIM_SUBS_CURRENT_TARIFF_TYPE, T223282.DIM_TIME_MONTH_ID
order by c1, c2
I have another subject area and which defined like this subject area contain two dimension and 5 fact table. If I want to display results on this subject area I can see best sql for my database
My problem is why this two different subject areas create different queries. I think following query is the best for database.
Thanks for your help
+++002002:2ea0000:2ea0015:----2009/03/14 10:30:06
-------------------- SQL Request:
SET VARIABLE QUERY_SRC_CD='Report';SELECT "Dim - Segments"."Marketing Segment" saw_0, "Fact - Campaign Response"."Fact Campaign Award Amount" saw_1, "Fact - Customer Interaction"."Issue Response Cost" saw_2 FROM "AVEA ALL" ORDER BY saw_0
+++002002:2ea0000:2ea0015:----2009/03/14 10:30:06
-------------------- General Query Info:
Repository: Star, Subject Area: AVEA ALL, Presentation: AVEA ALL
+++002002:2ea0000:2ea0015:----2009/03/14 10:30:06
-------------------- Sending query to database named AVEA ALL (id: <<474694>>):
WITH
SAWITH0 AS (select sum(T51461.FACT_CMPGN_AWARD_AMOUNT) as c1,
T49384.DIM_MARKETING_SGMNT_DESC as c2
from
DM.DIM_MARKETING_SEGMENT T49384 /* DIM_BI_MARKETING_SEGMENT */ ,
DM.FACT_CMPGN_RESPONSE T51461 /* FACT_BI_CMPGN_RESPONSE */
where ( T49384.DIM_MARKETING_SGMNT_ID = T51461.DIM_MARKETING_SGMNT_ID )
group by T49384.DIM_MARKETING_SGMNT_DESC),
SAWITH1 AS (select sum(T51503.FACT_CUST_INT_ISSUE_RES_COST) as c1,
T49384.DIM_MARKETING_SGMNT_DESC as c2
from
DM.DIM_MARKETING_SEGMENT T49384 /* DIM_BI_MARKETING_SEGMENT */ ,
DM.FACT_CUST_INTERACTN T51503 /* FACT_BI_CUST_INTERACTN */
where ( T49384.DIM_MARKETING_SGMNT_ID = T51503.DIM_MARKETING_SGMNT_ID )
group by T49384.DIM_MARKETING_SGMNT_DESC)
select distinct case when SAWITH0.c2 is not null then SAWITH0.c2 when SAWITH1.c2 is not null then SAWITH1.c2 end as c1,
SAWITH0.c1 as c2,
SAWITH1.c1 as c3
from
SAWITH0 full outer join SAWITH1 On SAWITH0.c2 = SAWITH1.c2
order by c1

I find solution on Oracle® Business Intelligence Suite Enterprise Edition Release Notes.
If you use a version of Oracle Database 10g Release 2 prior to 10.2.0.3, then you might encounter an issue with a Full Outer Join that causes severe database performance issues and appears to hang the database when the Oracle BI Server sends to the database SQL queries that include WITH clauses.
To work around this issue when using Oracle Database 10g Release 1 or 2, upgrade to Oracle Database 10g Release 2 Patch Set 2 (for 10.2.0.3). For performance reasons, this is the preferred workaround.
To work around this issue without installing Patch Set 2, modify the Database Features table using the Administration Tool. This configuration prevents the Oracle BI Server from sending SQL constructs that expose the issue in an unpatched Oracle Database 10g.
To modify the Database Features table:
In the Administration Tool, open the properties of the Physical Database metadata object.
Navigate to the Features tab.
Ensure the values for the PERF_PREFER_MINIMAL_WITH_USAGE and PERF_PREFER_INTERNAL_STITCH_JOIN entries are selected, that is, set to True.

Had a Search Criteria and the result as table in header.Wanted to bind the result table to bean for the key value access

Had Search Criteria and the result is displayed in the table in a panel header . I want to get the selected row value and parse the value to next Vo in next page for a bind variable . So i need to handle the tbale value by biniding to the bean , but there was no option to bind the table for a bean.So how can i get the value selected .
Regards,
K M Krishna.

First of all tell us your jdev version, please.
to get to the selected row you don't need to bind the table to a managed bean. You can e.g. drag the needed attributes from the VO onto the page and drop them as inputText components. the Framework then generated the attribute bindings and sets the values of the current row to them. As you don't really need the inputText components switch to source mode (!this is essential!) and remove them. This will remove the visual component but the attribute bindings are kept.
Know you can access the values via their EL or like you get the value from an attribute via it's binding.
Timo

Common URL and not to use the hostname.domain to connect

Hi All
We are interested in geeting information regarding the iAS vs. load balancer our question is : we have one common URL but we need to configure iAS10g to use this common URL and not to use the hostname.domain to connect
Can you please share some solutions ?
Thanks

Well, let me step back. I am not sure if I understand your question completely. Can you give me an example of what do you mean by "common url"?
Also when you say you want to use a common url vs. hostname.domain to connect, what is this connection you are talking about? Is this the connection to EM (AS Control)? Your application? Or something else?
Knowing this will help me suggest you the right/appropriate solution.
Thanks
Shail

Error:Lov Input should by default be the queryable criteria and Result

Hello,
I have a LOV Which displays the Locations.It has 2 columns Location_id and Location_Name.This LOV is attached to a field named "LocationName".Requirement is to show the existing location name based on the location id of the employee that is queried before updating the employee details.
The programatic Query property of the associated LOV map is set to True as i need to bind the query with the location_id at run time. However this gives me the following error message when the page is opened :
Lov Input should by default be the queryable criteria and Result
Can you please let me know what need's to be done?
Regards,
GayatriJ

Normally you will get this error, when you didn't give LOV field as the criteria item in the LOV mappings.
Check you have given the LOV field as one of the criteria mapping for the LOV.
Thanks.
With Regards,
Kali.

Satellite A210 - Can't install common module and display driver

Just downgraded to XP, downloaded drivers from toshiba and the installation ended with an error message saying no driver found for my hardware. Happened with Common Module and ATI Display Driver.
I mean, I need em both!
Help!

Hi
I checked the Toshiba European driver page and it seems that the XP drivers have not been released for this A210 series!
I think you have simply tired to install not compatible Common Modules on this notebook.
Thats a reason why you cannot install it.
Regarding the display driver;
Try to install the drivers for notebook models:
Equium A210 PSAEJE
Equium A300D PSAK2E
Equium L350D PSLE2E
Satellite P200 PSPBLE
Satellite L350D PSLE0E
Satrellite L300D PSLC0E
I think one of the drivers released for these series shoudl run.

How to refer a common Skins and Templates across projects

Requirement : I had created multiple projects in an application, what i want to do is to refer the common Skin and Template created across the project.
I found the way where i can locate the resource bundle across projects, in Project Properties. Is there any other way like that or any config files to be added to incorporate it.

1. create the application with Template & create adflibrary jar out of that project.
2.deploy adfLibraryJar
3.add this jar in to your project. you will able to see the that template in pageTemplate dropdown.

Common Criteria and 10.5

Similar Messages

Maybe you are looking for