Common delivery instructions for both the plants

hi,
sap gurus,
in sap system order and delivery instructions are genarated seperately for plants individually. 1000 and 2000.
but in our practice one delivery instruction will be created for two plants and basing on the truck availability and feasibility of practice and where ever stock is available they will supply from that plant.
for eg:
1000 kgs ordered --- 1000 kgs might be delivered by plant 1000 --- every time.
1000 kgs ordered --- 500 kgs might be delivered by plant 1000 and the remaining will be delivered by plant 2000.
i know that in SAP this functionality is not there, but provide me a way how to solve this issue.
requesting to provide solution for this.
regards,

Hi;
One way of doing it is splitting the order itself. Instead of 1000 units make it as 2 line items of 5 units each and change the plant at the item level. If you want to automate this process then i am afraid that we may need to make changes to the User exit and incorporate the change.
Regards,
Mani

Similar Messages

Equipment is common for both the plants.How to differentiate the cost seperatly

Hi Guys,
Maintenance plants are Ex:2076 and 2023 and planning is done by 2076 for both the plants.Equipments is unique for both the plants.
Suppose for example i have a equipment installed in 2023 and i will have the cost center of 2023 plant.When i create the order How can i differentiate the cost for both the plants.Manually i have to change the cost center in settlement rule.
Regards
Kumar

Hi Maheswaran,
I have maintain the values in Z- table like Equipment,Cost Center and percentage.
and also for reporting purpose in equipment location field :COMM is created.
When the development is done iam getting the below mesage when i try to REL the order.
"Enter a valid value for the settlement type".
I need to maintain any other values.
Regards
Kumar

Can i maintain a same number for both the customer and vendor

Hi all,
i have a scenario, as a vendor is supplying some assembly components to the client. the client is assembling the components. and sending the same to the vendor
since the same person is acting as a vendor and a customer i want a common number for both the vendor and customer in their master data's.
Thanks
KV
Edited by: krishna vamshi on Nov 27, 2010 12:20 PM

It's not mandatory to use the same ID for vendor and customer if they are the same entity, you can use different IDs w/o any problem.
It might be difficult, if you are using internal number assignment. It may occur that the ID is already occupied by a vendor or customer.
You can link your customer to your vendor both in XK01/XK02 (LFA1-KUNNR; control tab) and XD01/XD02 (KNA1-LIFNR; "Control Data" tab). One assignment is enough.
In this case you can always see, which customer belongs to which vendor.
Sometimes plant vendors, customers are defined via external number assignment, to have the same ID as the plant, but this should be decided in advance...(separate account group is used generally, with separate number range)

Sale Orders and Delivery Orders for a Particular Plant?

Hi,
Could you please tell me which tables or reports are to be used to
find
a) Sale Orders for a particular Plant
b) Delivery Orders for a particular Plant?
Regrds,
Binayak

You can see sales order for Particular Plant by using VA05, in that report you can find plant column. On that column you can sort out.
In Vl06 you can find the deliveries according to the Shipping point. Each shipping point is assigned to plant. So, indirectly you can find the delivered orders from the shipping pont and plants
Reward points if it is helpful

How to create common file systems for both development & quality systems

Hello Team
Need some calrification & advise
we are planning to install ECC6 with EHP5 on AIX7.1 with DB2 9.7 version on single physical server ( NO Virutal IP'S) for both development(SID : D10 & System number 20) & quality(SID : Q10 & System number 20) systems.And it will be running in single LPAR for development & quality systems.
please advise me how can we create the below common file systems for both development & quality to avoid file permission & installation issues.
/sapmnt/<SID>
/usr/sap/
/usr/sap/trans/
/db2/IBM
Thanks in advance & Regards
BM

Thanks you Juan for your response
We are planning for seperate DB instance only.
what could be the owner(UID) & group(GID) for the below file systems
/sapmnt/
usr/sap/
usr/sap/trans
Thanks in advance
BM

I'm a Canadian wishing to publish interactive books for both the Canadian and US markets. However, I've heard that Canadians would/do not have access to these interactive textbooks. Has this changed? If not, is there any indication that it will?

I'm a Canadian wishing to publish interactive books for both the Canadian and US markets. However, I've heard that Canadians would/do not have access to these interactive textbooks. Has this changed? If not, is there any indication that it will?

US only at this time.
Apple doesn't discuss future plans, sorry.
As always, feel free to use the 'Provide iBooks Author Feedback' menu item for features you'd like added in the future, etc.
http://www.apple.com/feedback/ibooks-author.html

'Valid to' dates for both the Header & the components in the BOM report.

Hi Experts,
My Requirement:
Need to display the 'Valid to' dates for both the Header & the components in the BOM report.
Right now we are using the Functional modules 'GET_STKO' & 'GET_STPO' for the header
& the components respectively. The report gives the correct output for the all the BOM alternatives
which exist. But for the BOM alternatives which have been deleted(updated in STKO-LKENZ)
'Valid to' dates are displayed as'00/00/0000'.
(Note:ECM is used for BOMs)
Is there any Logical Database that I can fetch the 'Valid to' dates of both BOM Header & components
which are deleted?
Regards,
Mahesh

Dear Mahesh,
In my understanding I dont think you cannot get the valid to date for BOM header,unless a ECN,(engineering change number) is
used to set the deletion flag.In otherwords none of the business sets for all these BOM's the valid to date(which means the
default valid to date 31.12.9999 is taken).
Check with this FM, CS_BOM_EXPL_MAT_V2 whether can you get the valid to date for the components(infact here also the
valid from date given in the input screen impacts the report output).
Check and revert back.
Regards
Mangalraj.S

What are the dimensions of the Apple Watch magnetic charger? Is the thickness the same for both the Watch Sport and Watch chargers?

I'm interested in the dimensions of the magnetic charger for both the Watch Sport and Watch. There are a number of third party charger stands out now and was wondering if a charger stand needs to be specific for the Sport or Watch or if any stand will fit accommodate both models.

Just for clarification, the white shown on the US Apple store charger is only a protective coating on the magnetic side so the charger doesn't scratch the watch. The remainder of the charger is polished metal. The Sport charger is entirely white, with no metal showing. The point is the magnetic charger ordered from the Apple store has a different thickness measurement from the magnetic charger that comes with the Watch Sport. This is only an issue for any aftermarket charging stand that expects chargers from both the Apple Watch and the Sport Watch to fit flush with the face of their stand. Only one or the other can fit flush. An option would be to manufacture for the thicker Sport Watch and include a 0.1" spacer for the Watch. This would allow either to fit flush with a stand face.
I'm done.

HT5621 I have changed my apple id recently and the changes have been reflected on my iPad for both the apps store and the iCloud, however, my iphone still insist on using my old apple id for the iCloud while the app store is fine. how can i correct the pr

I have changed my apple id recently and the changes have been reflected on my iPad for both the apps store and the iCloud, however, my iphone still insist on using my old apple id for the iCloud while the app store is fine. how can i correct the problem?
Thanks

Hi Baem_leeds
Welcome to the Support Communities!
If you change your Apple ID you will need to sign in with the new information or password the next time you use an Apple service or feature that uses Apple ID. If you have multiple devices that use features and services that require an Apple ID, you will need to sign in again on each device.
The links below will provide additional information:
Where can I use my Apple ID?
http://support.apple.com/kb/HT5616
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Cheers,
Judy

Can I use the same USB cable for both the iPhone and the iPad?

Brnad new user of the iPad - can I use the same USB cable for both the iPhone and the iPad? The iPad does not charge when plugged into the computer or the wall (110V) adapter. I've been able to sync in iTunes using the same cable on both.

Actually, the iPad charger works just fine with iPhones and iPods. The iPod/iPhone charger will charge an iPad very slowly but no harm will be done.

Recommendations for an external hard drive I can use for both the Mac and PC

Hello,
I’ve used PC’s for nearly most of my life, and recently Imade the leap to using a Macbook Pro (the 15” Intel i7) as I got tired of theconstant crashes. Long story short – Ineed to have a common external hard drive that I can use with both the PC’s andthe Mac I own. Mostly I need theexternal drive to save my Microsoft Office documents, and family photos (aswell as Mp3’s and other programs). I’vegone to the Mac Store in town, but I keep getting told that you cannot have acommon external hard drive between the two computers. I’m just having a hard time excepting that,as I keep reading on Apple’s own website making the sales pitch of how PC userswho switch to a Mac wouldn’t have to purchase replacement hardware. Are there recommended external drives thecommunity could recommend? Also, wouldit be best to create a network drive to accomplish my goal? Any advice isgreatly appreciated.

Only one computer can be connected to one drive at a time without a server being involved or a NAS drive.
I don't think your needs are along those lines it's too complex.
Just a external drive formatted exFAT will do between Mac's and PC's.
Swtich the cable and connect to one or the other as needed or get two drives.
There are some hacks floating around that create a portable wireless shared storage so anyone with a wif can connect and share files with at like coffee shops.
Is that what your looking for?

Delivery date for forwarder and plant

Hi Gurus,
I have got one issue, the description provided for me is "We have delivery date plant, and delivery date forwarder, but in case we use one lead time, should only delivery date plant showed in form." Could any body help me out in this regard.
Please reply me if you need any further information.
warm regards
Sridhar B

Yeah got ur point i was mapping the table configuaration for ur reference.
This grouping is supposed to make sure that all materials are delievered at the same Date (VBEP-EDATU) and must use the last date in the delivery group.
say materials X -- DELIVERY DATE 20 12 2006
Y -- DELIVERY DATE 27 12 2006
so the matnrs are avalaible in VBAP along with for the VBELN and POSNR values now pick the delivery date for this material from VBEP ,,
Now once the itab is sorted by delivery group and EDATU descending .
so X and Y are present in for delivery group 001 say .
X -- DELIVERY DATE 20 12 2006
Y-- DELIVERY DATE 27 12 2006
after sort by date it will be
Y-- DELIVERY DATE 27 12 2006
X -- DELIVERY DATE 20 12 2006
which will pick up the latest date (or max date)
Tis was what i meant to say.
what is the incude you r using ?
regards,
vijay

Period open for both the company codes

Hi All,
I have a scenario wherein one company code has been made defunct and its marketing activity have been transfered to another company code which hitherto only takes care of manufacturing. The customers of the defunct company code have been extended to the company code to take care of the marketing activities. Both the company codes are having seperate Posting period variant.
The posting peirod of the defunct company code is closed. But when we do F-31-Outgoing payment to Customer, the system is giving error 'posting in defunct company code not carried out'.
When we tested the same transaction in Sandbox by opening the periods of the defunct company code, the system is not giving error. This is bewildering and remain a mystery. We need to close the period of the defunct company code for ever and at the same time system should not give such error.
Does anybody went through this kind of situation? Please give me your valuable inputs on this.
Regards,

No responses and hence closed as answered. Thanks to all those who have gone through the thread.

Oracle 10g RAC SQL profiles not working for both the nodes

We have identified a long running sql.
Used Advisor to tune the sql
Applied the suggested sql_profile as per the recommendation.
when we re-run the sql from application, due to RAC setup the sql hit the other node, used the sql profile as indicated by v$sql but was long running.
it generated a new sql_id due to which we think it was not working.
Could you please advice how to apply sql_profile for both nodes?

HI Arun
Would you please post that in the GRID RAC section of this forum please ?
Please consult the following documents to get support on your question:
http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/votocr.htm#sthref211
http://download.oracle.com/docs/cd/B19306_01/install.102/b14205/undrstnd.htm#RISOL2610
Thanks

One scroll Bar for both the split-screen containers ?

Hello All,
I have 2 screens on my output which are split screens.
But now I want only one scroll bar for both of then so that when the scroll bar is used both the screens will simultaneously move.
Is this functionality possible ?
If yes can anyone help me out ?
Regards,
Deepu.K

Create a property node for each of the charts. Wire the controlling chart X scale maximum and minimum to the slave X scale max and min. (X Scale -> Range -> Max & Min).
Hope this helps.

Common delivery instructions for both the plants

Similar Messages

Maybe you are looking for