Common errors while taking backup.

Dear All,
1)what are the comman errors we will face while taking backups.(OR)
what are the necessary steps we have to take care in  ONLINE  , OFFLINE backup Process.
2) i have taken a backup sucessfully using BRTOOLS using offile backup
How to restore it in the new system  Database is ORACLE.
while file i have to give.
Regards
SNB

Hello ,
Please refer Note 605062 - FAQ: Restore and recovery.
Regards ,
Santosh Karadkar

Similar Messages

  • Error while taking backup  through RMAN in 10g XE

    While taking backup through RMAN in XE instance , an error comes out.
    The contents of oxe_backup_current file is as below :
    XE Backup Log
    Recovery Manager: Release 10.2.0.1.0 - Production on Wed Jul 6 15:49:51 2011
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    connected to target database: XE (DBID=2635631092)
    RMAN>
    echo set on
    RMAN> shutdown immediate;
    using target database control file instead of recovery catalog
    database closed
    database dismounted
    Oracle instance shut down
    RMAN> startup mount;
    connected to target database (not started)
    Oracle instance started
    database mounted
    Total System Global Area     805306368 bytes
    Fixed Size                     1261444 bytes
    Variable Size                209715324 bytes
    Database Buffers             591396864 bytes
    Redo Buffers                   2932736 bytes
    RMAN> configure retention policy to redundancy 2;
    old RMAN configuration parameters:
    CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
    new RMAN configuration parameters:
    CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
    new RMAN configuration parameters are successfully stored
    RMAN> configure controlfile autobackup format for device type disk clear;
    RMAN configuration parameters are successfully reset to default value
    RMAN> configure controlfile autobackup on;
    old RMAN configuration parameters:
    CONFIGURE CONTROLFILE AUTOBACKUP OFF;
    new RMAN configuration parameters:
    CONFIGURE CONTROLFILE AUTOBACKUP ON;
    new RMAN configuration parameters are successfully stored
    RMAN> sql "create pfile=''/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/dbs/spfile2init.ora'' from spfile";
    *sql statement: create pfile=''/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/dbs/spfile2init.ora'' from spfile*
    *RMAN-00571: ===========================================================*
    *RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============*
    *RMAN-00571: ===========================================================*
    *RMAN-03009: failure of sql command on default channel at 07/06/2011 15:50:57*
    *RMAN-11003: failure during parse/execution of SQL statement: create pfile='/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/dbs/spfile2init.ora' from spfile*
    *ORA-27086: unable to lock file - already in use*
    *Linux Error: 11: Resource temporarily unavailable*
    Additional information: 8
    Additional information: 16476
    RMAN> backup as backupset device type disk database;
    Starting backup at 06-JUL-11
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=102 devtype=DISK
    channel ORA_DISK_1: starting full datafile backupset
    channel ORA_DISK_1: specifying datafile(s) in backupset
    input datafile fno=00003 name=/usr/lib/oracle/xe/oradata/XE/sysaux.dbf
    input datafile fno=00005 name=/usr/lib/oracle/xe/oradata/XE/ftress_data_log01.dbf
    input datafile fno=00006 name=/usr/lib/oracle/xe/oradata/XE/ftress_data_lrg01.dbf
    input datafile fno=00001 name=/usr/lib/oracle/xe/oradata/XE/system.dbf
    input datafile fno=00009 name=/usr/lib/oracle/xe/oradata/XE/ftress_indx_log01.dbf
    input datafile fno=00010 name=/usr/lib/oracle/xe/oradata/XE/ftress_indx_lrg01.dbf
    input datafile fno=00002 name=/usr/lib/oracle/xe/oradata/XE/undo.dbf
    input datafile fno=00004 name=/usr/lib/oracle/xe/oradata/XE/users.dbf
    input datafile fno=00008 name=/usr/lib/oracle/xe/oradata/XE/ftress_data_sml01.dbf
    input datafile fno=00012 name=/usr/lib/oracle/xe/oradata/XE/ftress_indx_sml01.dbf
    input datafile fno=00011 name=/usr/lib/oracle/xe/oradata/XE/ftress_indx_mdm01.dbf
    input datafile fno=00007 name=/usr/lib/oracle/xe/oradata/XE/ftress_data_mdm01.dbf
    channel ORA_DISK_1: starting piece 1 at 06-JUL-11
    channel ORA_DISK_1: finished piece 1 at 06-JUL-11
    piece handle=/usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/backupset/2011_07_06/o1_mf_nnndf_TAG20110706T155057_718dw649_.bkp tag=TAG20110706T155057 comment=NONE
    channel ORA_DISK_1: backup set complete, elapsed time: 00:00:15
    Finished backup at 06-JUL-11
    Starting Control File and SPFILE Autobackup at 06-JUL-11
    piece handle=/usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/autobackup/2011_07_06/o1_mf_s_755797849_718dwofy_.bkp comment=NONE
    Finished Control File and SPFILE Autobackup at 06-JUL-11
    RMAN> configure controlfile autobackup off;
    old RMAN configuration parameters:
    CONFIGURE CONTROLFILE AUTOBACKUP ON;
    new RMAN configuration parameters:
    CONFIGURE CONTROLFILE AUTOBACKUP OFF;
    new RMAN configuration parameters are successfully stored
    RMAN> alter database open;
    database opened
    RMAN> delete noprompt obsolete;
    RMAN retention policy will be applied to the command
    RMAN retention policy is set to redundancy 2
    using channel ORA_DISK_1
    Deleting the following obsolete backups and copies:
    Type                 Key    Completion Time    Filename/Handle
    Backup Set           3      06-JUL-11        
      Backup Piece       3      06-JUL-11          /usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/backupset/2011_07_06/o1_mf_nnndf_TAG20110706T133443_7184wr4d_.bkp
    Backup Set           4      06-JUL-11        
      Backup Piece       4      06-JUL-11          /usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/autobackup/2011_07_06/o1_mf_s_755789675_7184x7fp_.bkp
    deleted backup piece
    backup piece handle=/usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/backupset/2011_07_06/o1_mf_nnndf_TAG20110706T133443_7184wr4d_.bkp recid=3 stamp=755789684
    deleted backup piece
    backup piece handle=/usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/autobackup/2011_07_06/o1_mf_s_755789675_7184x7fp_.bkp recid=4 stamp=755789699
    Deleted 2 objects
    RMAN>
    Recovery Manager complete.
    RMAN error: See log for details.

    I think it is trying to overwrite exiting file. Either give a different name or cleanup the files in preferred location.

  • Error while taking Backup using hpux tape drive

    I got the following error while taking a backup.
    ERROR:   System Error, /opt/ignite/bin/make_medialif failed creating boot LIF 
    ERROR:   Failed to generate LIF on tape.
    ERROR:   System Error, /opt/ignite/bin/make_medialif failed creating boot LIF
    ERROR:   Failed to generate LIF on tape.
    make_medialif: ERROR: Cannot tar and gzip script files; possibly insufficient di
    [24;1H[0K[7mscbackup.log (13%)[m[24;1H[0K/11[24;1H[24;1H[0Ksk space in /var/tmp/make_medialif8916.
    =======  11/10/10 12:17:49 IST  make_tape_recovery completed unsuccessfully
    ERROR:     Ignite tape writing phase had errors
               Exit status: 1
    How can this problem be resolved? Kindly drop in your comments and solutions. 

    Hello Kulvinderbuttar,
    I understand that you are not able to make the recovery media.
    Are you using recovery media creation?
    Here is a link to walk you through the steps to create the recovery media.
    The flash drive that you are using needs to be empty and may need to be reformatted before you can make the recovery media.
    Let me know how everything goes.

  • ORA27091 error while taking backup through BRtools via DB13

    Hi,
    I have installed ECC5.0 on Oracle 10.2.02 with SUSE Linux 10.
    When I start the backup of SAP system to disk via DB13 I get the following error.
    BR0051I BRBACKUP 7.00 (16)
    BR0055I Start of database backup: befppthd.afd 2011-04-08 00.04.53
    BR0280I BRBACKUP time stamp: 2011-04-08 00.04.53
    BR0301E SQL error -27091 at location BrInitOraCreate-5, SQL statement:
    '/* BRBACKUP AT PROF_CONN */ CREATE PFILE = '/oracle/EC5/102_64/dbs/sap.ora' FROM SPFILE = '/oracle/EC5/102_64/dbs/spfileEC5.ora''
    ORA-27091: unable to queue I/O
    ORA-27072: File I/O error
    Linux-x86_64 Error: 22: Invalid argument
    Additional information: 4
    Additional information: 1
    Additional information: -1
    BR0303E Determination of Oracle version failed
    BR0056I End of database backup: befppthd.afd 2011-04-08 00.04.53
    BR0280I BRBACKUP time stamp: 2011-04-08 00.04.54
    BR0054I BRBACKUP terminated with errors
    Kindly help me resolve the issue.
    Thanks,
    Haroon.

    Hi Mark,
    I tried created spfile but it is not still working.
    I don't knw why it tries to create pfile with "sap.ora"
    BR0301E SQL error -27091 at location BrInitOraCreate-5, SQL statement:
    '/* BRBACKUP AT PROF_CONN */ CREATE PFILE = '/oracle/EC5/102_64/dbs/sap.ora' FROM SPFILE = '/oracle/EC5/102_64/dbs/spfileEC5.ora''
    Thanks,
    Haroon.

  • Getting error while taking MAX DB trans log backup.

    Hi,
    I am getting error while taking trans log backup of Maxdb database for archived log through data protector as below,
    [Critical] From: OB2BAR_SAPDBBAR@ttcmaxdb "MAX" Time: 08/19/10 02:10:41
    Unable to back up archive logs: no autolog medium found in media list
    But i am able to take complete data and incremental backup through data protector.
    I have already enabled the autolog for MAX DB database and it is writing that log file directly to HP-UX file system. Now i want to take backup of this archived log backup through data protector i.e. through trans log backup. So that the archived log which is on the file system after trans log backup completed will delete the archived logs in filesystem.  So that i don;t have to manually delete the archived logs from file system.
    Thanks,
    Subba

    Hi Lars,
    Thanks for the reply...
    Now i am able to take archive log backup but the problem is i can take only one archive file backup. Not multiple arhive log files generated by autolog at filesystem i.e /sapdb/MAX/saparch.
    I have enabled autolog and it is putting auto log file at unix directory i.e. /sapdb/MAX/saparch
    And then i am using the DataProtector 6.11 with trans log backup to backup the archived files in /sapdb/MAX/saparch. When i start the trans backup session through data protector it uses the archive stage command as "archive_stage BACKDP-Archive LOGBackup NOVERIFY REMOVE" If /sapdb/MAX/saparch has only one archive file it will backup and remove the file successfully. But if /sapdb/MAX/saparch has multiple archive files it gives an error as below,
      Preparing backup.
                Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
                Setting environment variable 'BI_REQUEST' to value 'OLD'.
                Setting environment variable 'BI_BACKUP' to value 'ARCHIVE'.
                Constructed Backint for MaxDB call '/opt/omni/lbin/sapdb_backint -u MAX -f backup -t file -p SAPDB.13576.1283767878.par -i /var/opt/omni/tmp/MAX.
    bsi_in -c'.
                Created temporary file '/var/opt/omni/tmp/MAX.bsi_out' as output for Backint for MaxDB.
                Created temporary file '/var/opt/omni/tmp/MAX.bsi_err' as error output for Backint for MaxDB.
                Writing '/sapdb/data/wrk/MAX/dbm.ebf' to the input file.
                Writing '/sapdb/data/wrk/MAX/dbm.knl' to the input file.
            Prepare passed successfully.
            Starting Backint for MaxDB.
                Starting Backint for MaxDB process '/opt/omni/lbin/sapdb_backint -u MAX -f backup -t file -p SAPDB.13576.1283767878.par -i /var/opt/omni/tmp/MAX.
    bsi_in -c >>/var/opt/omni/tmp/MAX.bsi_out 2>>/var/opt/omni/tmp/MAX.bsi_err'.
                Process was started successfully.
            Backint for MaxDB has been started successfully.
            Waiting for the end of Backint for MaxDB.
                2010-09-06 03:15:21 The backup tool is running.
                2010-09-06 03:15:24 The backup tool process has finished work with return code 0.
            Ended the waiting.
            Checking output of Backint for MaxDB.
            Have found all BID's as expected.
        Have saved the Backup History files successfully.
        Cleaning up.
            Removing data transfer pipes.
                Removing data transfer pipe /var/opt/omni/tmp/MAX.BACKDP-Archive.1 ... Done.
            Removed data transfer pipes successfully.
            Copying output of Backint for MaxDB to this file.
    Begin of output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_out)----
                #SAVED 1009067:1 /sapdb/data/wrk/MAX/dbm.ebf
                #SAVED 1009067:1 /sapdb/data/wrk/MAX/dbm.knl
    End of output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_out)----
            Removed Backint for MaxDB's temporary output file '/var/opt/omni/tmp/MAX.bsi_out'.
            Copying error output of Backint for MaxDB to this file.
    Begin of error output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_err)----
    End of error output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_err)----
            Removed Backint for MaxDB's temporary error output file '/var/opt/omni/tmp/MAX.bsi_err'.
            Removed the Backint for MaxDB input file '/var/opt/omni/tmp/MAX.bsi_in'.
        Have finished clean up successfully.
    The backup of stage file '/export/sapdb/arch/MAX_LOG.040' was successful.
    2010-09-06 03:15:24
    Backing up stage file '/export/sapdb/arch/MAX_LOG.041'.
        Creating pipes for data transfer.
            Creating pipe '/var/opt/omni/tmp/MAX.BACKDP-Archive.1' ... Done.
        All data transfer pipes have been created.
        Preparing backup tool.
            Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
            Setting environment variable 'BI_REQUEST' to value 'OLD'.
            Setting environment variable 'BI_BACKUP' to value 'ARCHIVE'.
            Constructed Backint for MaxDB call '/opt/omni/lbin/sapdb_backint -u MAX -f backup -t file -p SAPDB.13576.1283767878.par -i /var/opt/omni/tmp/MAX.bsi_
    in -c'.
            Created temporary file '/var/opt/omni/tmp/MAX.bsi_out' as output for Backint for MaxDB.
            Created temporary file '/var/opt/omni/tmp/MAX.bsi_err' as error output for Backint for MaxDB.
            Writing '/var/opt/omni/tmp/MAX.BACKDP-Archive.1 #PIPE' to the input file.
        Prepare passed successfully.
        Constructed pipe2file call 'pipe2file -d file2pipe -f /export/sapdb/arch/MAX_LOG.041 -p /var/opt/omni/tmp/MAX.BACKDP-Archive.1 -nowait'.
        Starting pipe2file for stage file '/export/sapdb/arch/MAX_LOG.041'.
            Starting pipe2file process 'pipe2file -d file2pipe -f /export/sapdb/arch/MAX_LOG.041 -p /var/opt/omni/tmp/MAX.BACKDP-Archive.1 -nowait >>/var/tmp/tem
    p1283767880-0 2>>/var/tmp/temp1283767880-1'.
            Process was started successfully.
        Pipe2file has been started successfully.
        Starting Backint for MaxDB.
            Starting Backint for MaxDB process '/opt/omni/lbin/sapdb_backint -u MAX -f backup -t file -p SAPDB.13576.1283767878.par -i /var/opt/omni/tmp/MAX.bsi_
    in -c >>/var/opt/omni/tmp/MAX.bsi_out 2>>/var/opt/omni/tmp/MAX.bsi_err'.
            Process was started successfully.
        Backint for MaxDB has been started successfully.
        Waiting for end of the backup operation.
            2010-09-06 03:15:25 The backup tool process has finished work with return code 2.
            2010-09-06 03:15:25 The backup tool is not running.
            2010-09-06 03:15:25 Pipe2file is running.
            2010-09-06 03:15:25 Pipe2file is running.
            2010-09-06 03:15:30 Pipe2file is running.
            2010-09-06 03:15:40 Pipe2file is running.
            2010-09-06 03:15:55 Pipe2file is running.
            2010-09-06 03:16:15 Pipe2file is running.
            Killing not reacting pipe2file process.
            Pipe2file killed successfully.
            2010-09-06 03:16:26 The pipe2file process has finished work with return code -1.
        The backup operation has ended.
        Filling reply buffer.
            Have encountered error -24920:
                The backup tool failed with 2 as sum of exit codes and pipe2file was killed.
            Constructed the following reply:
                ERR
                -24920,ERR_BACKUPOP: backup operation was unsuccessful
                The backup tool failed with 2 as sum of exit codes and pipe2file was killed.
        Reply buffer filled.
        Cleaning up.
            Removing data transfer pipes.
                Removing data transfer pipe /var/opt/omni/tmp/MAX.BACKDP-Archive.1 ... Done.
            Removed data transfer pipes successfully.
            Copying output of Backint for MaxDB to this file.
    Begin of output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_out)----
    End of output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_out)----
            Removed Backint for MaxDB's temporary output file '/var/opt/omni/tmp/MAX.bsi_out'.
            Copying error output of Backint for MaxDB to this file.
    Begin of error output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_err)----
    End of error output of Backint for MaxDB (/var/opt/omni/tmp/MAX.bsi_err)----
            Removed Backint for MaxDB's temporary error output file '/var/opt/omni/tmp/MAX.bsi_err'.
            Removed the Backint for MaxDB input file '/var/opt/omni/tmp/MAX.bsi_in'.
            Copying pipe2file output to this file.
    Begin of pipe2file output (/var/tmp/temp1283767880-0)----
    End of pipe2file output (/var/tmp/temp1283767880-0)----
            Removed pipe2file output '/var/tmp/temp1283767880-0'.
            Copying pipe2file error output to this file.
    Begin of pipe2file error output (/var/tmp/temp1283767880-1)----
    End of pipe2file error output (/var/tmp/temp1283767880-1)----
            Removed pipe2file error output '/var/tmp/temp1283767880-1'.
        Have finished clean up successfully.
    The backup of stage file '/export/sapdb/arch/MAX_LOG.041' was unsuccessful.
    2010-09-06 03:16:26
    Cleaning up.
        Have encountered error -24919:
            Can not remove file '/var/tmp/temp1283767880-0'.
            (System error 2; No such file or directory)
        Could not remove temporary output file of pipe2file ('/var/tmp/temp1283767880-0' ).
        Have encountered error -24919:
            Can not remove file '/var/tmp/temp1283767880-1'.
            (System error 2; No such file or directory)
        Could not remove temporary output file of pipe2file ('/var/tmp/temp1283767880-1' ).
    Have finished clean up successfully.
    Thanks,
    Subba

  • I am getting below error while taking RMAN backup.

    Friends,
    I am getting below error while taking RMAN backup.
    The issue is related with a lock while trying to backup the controlfile.
    The lock is more likely caused by the autobackup controlfile process started just before RMAN process was also trying the backup controlfile as shown in the following alert.log excerpt.
    Starting Control File and SPFILE Autobackup at 2009-04-07 09:24:58
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of Control File and SPFILE Autobackup command on ORA_DISK_1 channel at 04/07/2009 09:25:03
    ORA-00230: operation disallowed: snapshot control file enqueue unavailable
    Is there anyway to solve this issue?Thanks in advance.

    Hi,
    SQL> SELECT s.sid, username AS "User", program, module, action, logon_time "Logon", l.*
    FROM v$session s, v$enqueue_lock l
    WHERE l.sid = s.sid and l.type = 'CF' AND l.id1 = 0 and l.id2 = 2; 2 3
    no rows selected
    Oracle version : 10.2.0.3
    I am getting this error once in a month not everyday.
    Starting Control File and SPFILE Autobackup at 2009-04-07 09:24:58
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of Control File and SPFILE Autobackup command on ORA_DISK_1 channel at 04/07/2009 09:25:03
    ORA-00230: operation disallowed: snapshot control file enqueue unavailable
    Please suggest me based on this..Thanks in advance..

  • Error while taking archive log backup

    Dear all,
    We are getting the below mentioned error while taking the archive log backup
    ============================================================================
    BR0208I Volume with name RRPA02 required in device /dev/rmt0.1
    BR0210I Please mount BRARCHIVE volume, if you have not already done so
    BR0280I BRARCHIVE time stamp: 2010-05-27 16.43.41
    BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRARCHIVE:
    c
    BR0280I BRARCHIVE time stamp: 2010-05-27 16.43.46
    BR0257I Your reply: 'c'
    BR0259I Program execution will be continued...
    BR0280I BRARCHIVE time stamp: 2010-05-27 16.43.46
    BR0226I Rewinding tape volume in device /dev/rmt0 ...
    BR0351I Restoring /oracle/RRP/sapreorg/.tape.hdr0
    BR0355I from /dev/rmt0.1 ...
    BR0278W Command output of 'LANG=C cd /oracle/RRP/sapreorg && LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt0.1':
    Can't read input
    ===========================================================================
    We are able to take offline, online backups but we are facing the above mentioned problem while taking archive log backup
    We are on ECC 6 / Oracle / AIX
    The kernel is latest
    The drive is working fine and there is no problem with the tapes as we have tried using diffrent tapes
    can this be a permissions issue?
    I ran saproot.sh but somehow it is setting owner as sidadm and group as sapsys to some of the br* files
    I tried by changing the permissions to oraSID : dba but still the error is the same
    Any suggestions?

    Means you have not initialized the medias but trying to take backups.
    First check how many medias you have entered in your tape count parameter for archive log backups (just go to initSID.sap and check)
    Then increase/reduce them to according to your archive backup plan >> Initialize all the tapes according to their name (same as you have initialized in initSID.sap) >> stick physical label to all the medias according to name >> Schedule archive backups
    It will not ask you for initialization as already you have initialized in second step.
    Suggestion: Use 7 medias per week (one tape per day)
    Regards,
    Nick Loy

  • Dd read error while taking offline_force backup

    hi . we r taking daily offline_force backup with verification
      while taking backup dd read occur plz help me
    regards
    mohsin
    +919867577675

    hi  gffgn dfnbgdf,
    this is dfkferjkui kdfksiwkw!  I love your name!
    if the previous answer does not help, please supply full brbackup log

  • Nokia 5800xm - Problem while taking backup on PC ...

    While taking backup of my Nokia 5800xm on PC at the end it displays :The backup was finished but errors occured when backing up the phone contents. For more information see the backup report. The report suggested to try again after restarting the phone but no difference.. At the end it says Contacts, Calender and Messages can not be backed up as not enough memory...
    Pl. help

    Tried the backup thru' OVI Suit there is no such error message. Then again with Nokia Suit it shows error. Now this is confusing. I am having doubt whether it will be OK if I need a restore from the one thru' OVI Suit and all my data including Contacts, Calender entries, Messages will be restored totally..

  • Ora-00604 error while taking tkprof of a trace file

    Sorry i am giving the full erro but omitting exact table names
    Hi ,
    I have an error while taking tkprof of a trace file.
    I gave the following command ---
    tkprof <source.trc> <file.prc> sys=no sort=exeela,fchela,prsela explain= /
    error is --
    Error in create table of EXPLAIN PLAN table : unix_session_user.prof$paln_table
    ORA-00604: error occurred at recursive SQL level 1
    ORA-20001: Step-6:DDL
    Event Security. You are not permitted to perform the requested structural
    changes to PROF (TABLE)
    Event triggered : CREATE
    ora_login_user
    (session_user) : unix_session_user(dummy)
    Search : select count(*) from
    tabl(dummy table name) where obj_name like '%\%%' escape '\' and obj_type =
    'TABLE' and obj_type = 'USER' and ( event_CREATE = 'Y' or status =
    'Override')
    ORA-06512: at line 162
    ORA-06510: PL/SQL: unhandled
    user-defined exception
    EXPLAIN PLAN option disabled.
    i searched for the error and in oracle forum i found a solution .. http://forums.oracle.com/forums/thread.jspa?threadID=844287&tstart=0
    but after giving the table option it is giving the same error
    tkprof <source.trc> <file.prc> sys=no sort=exeela,fchela,prsela table=old_schema.plan_table explain= /
    it again gave the same error.
    In both two cases it gives elapsed time results,library cache missing etc but before giving this it throws ORA-00604 error as stated above
    then i again correct the tkprof statement ..
    tkprof <source.trc> <file.prc> sys=no sort=exeela,fchela,prsela table=new_schema.plan_table explain= /
    say this schema name here i used is dummy schema name.
    My question is did this error came as we had not sufficient previlages in the old_schema but that previleges we have in new_schema?
    My databse version is 9.2.0.4.0
    Thanks in advance
    Edited by: bp on Feb 3, 2009 11:36 PM
    Edited by: bp on Feb 3, 2009 11:40 PM

    Please post here full error message, there should be lines with ORA-00604 and then some other ORA as well.
    And are there any trace files generated during this error?
    And as You can see from error description, probably You will have to contact with Oracle support in order to solve this case:
    oerr ora 00604
    00604, 00000, "error occurred at recursive SQL level %s"
    // *Cause:  An error occurred while processing a recursive SQL statement
    // (a statement applying to internal dictionary tables).
    // *Action: If the situation described in the next error on the stack
    // can be corrected, do so; otherwise contact Oracle Support.

  • What are the common error while EBS installation in Unix /windows

    what are the common error while EBS R12 installation with os unix and windows.
    oracle have any any check after installation all installation are correct according to no of directory, files and file size ?
    regards

    Hi user;
    what are the common error while EBS R12 installation with os unix and windows.AFAIK there is no document which show common error.There are some common error for installation like:
    RW-5004- RW-50010 etc.
    For error we have to check instalaltion log files for can get more details about it
    oracle have any any check after installation all installation are correct according to no of directory, files and file size ?Oracle has 2 checking mechanisim during installation.
    1. Before start installation, rapidwiz makes Validate system Configuration check which is checking port avaliability,file system check etc.
    2. End of the installation,rapidwiz makes Validate system Configuration again to check jsp,dbc file, db avaliablity etc..
    For more details Please check:
    For r12.1.1:
    http://download.oracle.com/docs/cd/B53825_01/current/html/docset.html
    For r12:
    http://download.oracle.com/docs/cd/B40089_10/current/html/docset.html
    Hope it helps
    Regard
    Helios

  • Getting error while taking preview of Web Dynpro iView

    Hi,
    I am getting this error while taking a preview of Web Dynpro iView :
    500   Internal Server Error
          SAP J2EE Engine/6.40
    Application error occurred during request processing.
    Details:   com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Wrong WebDynpro-URL: no application name specified
    Exception id: [0011D83FB2E7004A00000CB800001E0400045F7E8F181DF7]
    This error comes if the Web Dynpro iView don't have the Web Dynpro application name specified.
    Regards
    Neha Singh

    Hi,
    After selecting the Webdynpro java iView enter the following parameter correctly
    1. System -  Sap-LocalSystem
    2.Name Space  - local/<your webdynpro project name>
    3.Application name - <your webdynpro application name>
    4. choose plain HTML option
    Regards,
    P.Manivannan

  • ORA-19870: error while restoring backup piece -- file exists in ASM

    [oracle@rs1pre92dvdbsa01 ~]$ rman target sys/c9nv9sd9t9f11e@mdm11 auxiliary /
    Recovery Manager: Release 11.2.0.1.0 - Production on Fri Oct 29 10:41:38 2010
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: MDM (DBID=1485385044)
    connected to auxiliary database: MDM (not mounted)
    RMAN> duplicate target database for standby;
    Starting Duplicate Db at 29-OCT-10
    using target database control file instead of recovery catalog
    allocated channel: ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: SID=13 device type=DISK
    contents of Memory Script:
    restore clone standby controlfile;
    executing Memory Script
    Starting restore at 29-OCT-10
    using channel ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: starting datafile backup set restore
    channel ORA_AUX_DISK_1: restoring control file
    channel ORA_AUX_DISK_1: reading from backup piece +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
    channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
    ORA-19505: failed to identify file "+MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607"
    ORA-17503: ksfdopn:2 Failed to open file +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
    ORA-15012: ASM file '+MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607' does not exist
    failover to previous backup
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 10/29/2010 10:42:00
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06026: some targets not found - aborting restore
    RMAN-06024: no backup or copy of the control file found to restore
    RMAN>
    ASMCMD [+mdmdg2] > cd mdm1
    ASMCMD [+mdmdg2/mdm1] > ls
    CONTROLFILE/
    FLASHBACK/
    ONLINELOG/
    arch/
    autobackup/
    ASMCMD [+mdmdg2/mdm1] > cd autobackup
    ASMCMD [+mdmdg2/mdm1/autobackup] > ls
    2010_10_29/
    ASMCMD [+mdmdg2/mdm1/autobackup] > cd 2010_10_29
    ASMCMD [+mdmdg2/mdm1/autobackup/2010_10_29] > ls
    s_733654605.283.733654607
    As seen in asmcmd "s_733654605.283.733654607" file exists in +mdmdg2/mdm1/autobackup/2010_10_29 then why it is complaning that it can't find the file.
    and also How to open/view file in asmcmd

    [oracle@rs1pre91dvdbaa01 utl]$ sqlplus / as sysasm
    SQL*Plus: Release 11.2.0.1.0 Production on Fri Oct 29 13:11:44 2010
    Copyright (c) 1982, 2009, Oracle. All rights reserved.
    Connected to an idle instance.
    SQL> startup;
    ORA-01078: failure in processing system parameters
    ORA-29701: unable to connect to Cluster Synchronization Service
    I have rebooted both the RAC servers and I can't start database?
    I was under the impression that Database should be automatically started as part of Clusterware
    Please help urgent.

  • ORA-19870: error while restoring backup piece

    RMAN> duplicate target database for standby;
    Starting Duplicate Db at 30-06-2011 10:39:45
    using target database control file instead of recovery catalog
    allocated channel: ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: SID=488 device type=DISK
    contents of Memory Script:
    restore clone standby controlfile;
    executing Memory Script
    Starting restore at 30-06-2011 10:39:45
    using channel ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: starting datafile backup set restore
    channel ORA_AUX_DISK_1: restoring control file
    channel ORA_AUX_DISK_1: reading from backup piece /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
    channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
    ORA-19505: failed to identify file "/dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp"
    ORA-27037: unable to obtain file status
    Linux-x86_64 Error: 2: No such file or directory
    Additional information: 3
    failover to previous backup
    channel ORA_AUX_DISK_1: starting datafile backup set restore
    channel ORA_AUX_DISK_1: restoring control file
    channel ORA_AUX_DISK_1: reading from backup piece /dborafiles/mdm_bn/mdm/backup/MDM11_rgmg62jn_1_1.ctl_bkp
    channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /dborafiles/mdm_bn/mdm/backup/MDM11_rgmg62jn_1_1.ctl_bkp
    ORA-19505: failed to identify file "/dborafiles/mdm_bn/mdm/backup/MDM11_rgmg62jn_1_1.ctl_bkp"
    ORA-27037: unable to obtain file status
    Linux-x86_64 Error: 2: No such file or directory
    Additional information: 3
    failover to previous backup
    channel ORA_AUX_DISK_1: starting datafile backup set restore
    channel ORA_AUX_DISK_1: restoring control file
    channel ORA_AUX_DISK_1: reading from backup piece /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755169400_70rd79x9_.bkp
    user interrupt received
    ORACLE error from target database:
    ORA-03114: not connected to ORACLE
    File permission on the primary
    [oracle@bnl11237dat01 MDM1]$ ls -l /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
    -rw-rw-rw- 1 oracle oinstall 22216704 Jun 30 10:33 /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
    We are getting the above error when creating the standby on different host to primary. Please can I know how to resolove this error.

    Please copy the backup pieces and archivelogs from the target database to the standby database..Do remember that the location on the standby database node must be same as of the target database node..
    For example : if the bkp pieces of target db node is on '/ora_backup/target_name/bkp' then the same locaiton must be created on standby
    if the archivelogs of target db node is on '/ora_backup/target_name/arch' then the same location must be created on standby
    Hope its clear.

  • Time Machine error while creating backup folder

    Several times today I have gotten a popup message. "Time Machine error while creating backup folder".  I click OK, and then the message appears again after a hour or so.  I am using a WD My Book external drive as my backup media.  I looked at the drive in Finder and the older (yesterday and beyond) backup folders are there.

    always a pleasure doing business with you, dear sir
    JGG
     

Maybe you are looking for