Common GO button for multiple prompts created in OBIEE Dashboard

Hi,
Is there any possibility to have a common GO button for multiple prompts created on the OBIEE dashboard.
Any response to this would be appreciated.
Regards,
Rajkumar.

Hey i used the java script given in link :- http://sranka.wordpress.com/2008/11/09/how-to-replace-multi-go-button-prompt-by-one/#comment-96
to hide multi-go-button in prompts and it works for IE 7 and firefox 2.0* with 10.3.4.1.
Now since 10.1.3.4.1 is certified with firefox 3.0* ,when i use this same script in firefox 3.0* for my prompts it doesn’t work .
Any idea why ? Please help me with this,as i want to use this hide go button feature in firefox 3.0* too.
Are these scripts browser to browser incompatible ? If yes from where can i get the script for firefox 3.0* ?
Awaiting for the inputs.
Thanks,
Nisha

Similar Messages

  • Single Go button for all prompts - without making changes to system files

    Hi All,
    I went thru several threads and blogs which suggest to do certain changes in the .js files to get a single go button for a group of prompts (saved as individual objects)
    Is it possible to have single go button in 11g for prompts which are saved separately without changing the system files?
    Many Thanks,
    RS

    Hi,
    I dont think so. But in 11.1.6 version there is a feasibility to avoid apply and reset buttons. so that will make to appear all the prompts together.
    And you can try to built a common prompt filter with all the columns, but it will be bad and cause lots of problems.
    Hope this helped/ answered.
    Regards
    MuRam

  • Common MRP area for Multiple plants

    Hai gurus,
    I had created a MRP area called 'X' , this MRP area contians some 10 storage locations.
    1) Now my question is whether I can assign the above MRP area 'X" to Multiple plants namely A/B and C
    2) Can i run MRP for plant A seperately and plant B seperately and plant C seperately , so that the storage location
        stocks in the MRP area 'X' is considered , and create the requirement accordingly, plant wise
    waiting for the positive reply.
    regards,
    sekar chand

    HAi,
    The company has three plants, which is under same management, they produce some similar products in all plants
    and some different products in each plants.
    so the requirements from all the plants are collected , procurement is made commonly and stored in common storage
    locations( As we are calling now as common  MRP area) for all the three plants, and based on the requirement the raw material
    is moved to three plants.
    This is the scenario and not the simulation , so my question is can we assign one single common storage MRP area to
    all the three plants, so that while running MRP run for each plant individually or under scope of planning, the stock under
    common MRP area is considered each plants , and then the requirement is created accordingly.
    regards,
    sekar chand
    Edited by: sekar chand on Aug 26, 2009 6:00 AM,,

  • Master On/Off Audio Button for Multiple swfs

    I need to create a “master” On/Off Audio Button
    that will control audio for a series of swfs loaded into a
    “master” swf. Each loaded swf will have a Media Display
    or FLV Playback MP3 progressive audio file supplying audio with cue
    points for that imported swf.
    What ActionScript would work for a “master”
    On/Off Audio Button in the main swf that would control audio for
    all of the loaded swfs so a setting in the “master” swf
    would effect all loaded swfs without the user needing to reset the
    On/Off Audio Button for each swf?
    Thanks!

    Use an array to store the names for each of the sound/video
    objects and then cycle through them and shut each off.

  • Common control buttons for animation+video

    I wan to be able to embed an animation like one of these http://http://www.texample.net/tikz/examples/tag/animations/, which has its own control buttons,
    alongside a regular video, and have both of them run by a common set of control buttons for play/pause/rewind.
    For example, the video could be a video of an actual object or a ball falling, and the animation could be the animated drawing of some math formula related to the fall of the object.
    Message was edited by: Maesumi

    (1) Is it possible to put 3 buttons, say A, B, C, on a PDF page so that pressing A  will be equivalent to pressing B and C?
    (2) And would Adobe Pro allow one button to be placed  on top of another one?
    The simplistic idea here is to manually perform what a program would do. So I will use A as the master control  and place B on top of the control  button for the video and put C on the control button for animation. Then when I click on A it is as if I have pressed B and C simultaneously.

  • Toggle Buttons for multiple images

    I just watched a video from lilybiri about standard and simple actions and then followed into her blog for the text caption toggle buttons.
    Now reading through that, there was if statements suggesting you can toggle between the values of 1 and 0 to make visible/invisible. Can this be done with more than 2 images? I am more interested in having a toggle feature where I can have 3 or 4 images and toggle the images to see changes in detail within those images. It seems like it has to be possible, but I'm not getting it.
    Also, is there a way that if you have a toggle button, or two perhaps, that you can have the button be displayed as if it was pushed? I know how to make buttons, I'm just wondering if there is a feature to display the button as the _down version until I re-select it, or toggle it off as it were.
    Thank you!

    You will need a conditional action, perhaps use a variable for each button that will be set to 1 if the button is pushed and to 0 if it is free.
    Didn't check it out but action will be something like this:
    IF v_bt1 is equal to 0
        Assign v_bt1 with 1
        Show im_down1        which is the image of the down-state
        Show Image1             which is the image you want to show
        Hide Image2
        Hide Image3
    ELSE
       Assign v_bt1 with 0
       Hide im_down1
       Hide Image1
    You'll have to test, it is too late over here for me to do some testing. I added the hiding of the two other images, because if the user doesn't toggle the buttons for those images to hide them, I think you want to hide them automatically. Perhaps better also hide their correspondent down-states? Be sure to have the image of the down-state on top of the button in the timeline panel.
    And if you ever want to return to the slide, have an on Enter Slide action that hides all the down and real images.
    Lilybiri

  • How to make the common control button for all pages in TABCONTROL​?

    Dear all,
               I'm using TABCONTROL for my application. I'm having STOP and SAVE control. I have to show this button to all pages  in TABCONTROL.. How do i make it?
    Kindly help me?..
    Regards,
    Srinivasan.P
    Solved!
    Go to Solution.

    Hi srinivasan,
    If you want to keep "Save" and "Stop" common, Why do you want to keep them on Tab control? Is your tab control taking entire space on Front panel? If so, you can have SAVE and STOP on other vi, and you can call this vi (MODAL).
    Gaurav k
    CLD Certified !!!!!
    Do not forget to Mark solution and to give Kudo if problem is solved.

  • Can I setup common iPhoto library for multiple computers...

    Hi -
    Is it possible to have one library that is accessible from multiple computers in different locations? For example, my office Mac, my home Powerbook and our vacation home iMAC can all share the same photo library? I am downloading pictures from many different sources and in different locations and would like a centralized library.. I guess this would be the equivalent of cloud computing for iPhoto...
    Thanks,
    M.

    Possibly. I've not used the feature but if you have a MMe account you could setup "Back to my Mac" so that two of your Macs could access the Mac designated to house the library you might be able to do what you want. It would be best to have an external FW hard drive connected to that library to house the library.
    I've used an iPhoto library on my iMac from my laptop on our home WAN. But that was with Screen Sharing. Don't know if the Back to My Mac method would work.
    I've used VNC to connect to my iMac from the laptop but don't know if that will let me add photos to the library there as that method has me virtually on the iMac. You could try it with a test library and one of the VNC applications. I use Chicken of VNC. You must setup Remote Management under Sharing on the host computer and install CVNC on the remote Macs. Create a test library and give it a try. Both with VNC and Back to My Mac if you have it.
    If any of the two satellite Macs would be wirelessly connected that will be a problem due to occasional dropouts. If a wireless Mac was using the library and had a dropout that could damage the library's database and require some rebuilding effort which may or may not be 100% effective. That connection would also be slow.
    If they are hard wired to the internet it would be much more probable that it would work as you'd like and be more reliable.
    An alternative method for "syncing" the libraries (if you have a MMe account) would be to create iPhoto MMe galleries of new photos from each Mac with the option for downloading the full sized image file. Once each Mac has downloaded and imported the new photos the gallery could be deleted.

  • Using "All Calls" button for multiple lines on one phone

    I have several executive assistants that have multiple lines for executives that they answer calls for. We have added the "All Calls" button so they don't accidentally make outbound call using one of the executives lines. When the All Calls button is selected, all outbound calls are made using line 1. However, when a call comes in on one of the executives lines it doesn't show the name and number of the calling party unless you select the line.
    How can we make it so the name and number show on the inbound call while having the "All Calls" button selected?

    Little confused still by this, just want to make sure I'm clear.  My current set up with Asterisk is you make users which are extensions, and then enable voicemail on them, so for example:
    Extension 300 - Voicemail enabled
    Extension 301 - Voicemail enabled
    Extension 302 - No Voicemail
    Etc.  And it's there that you set the username/password for each extension.  So on a SIP phone, under Line 1 registration I'd have it register Extension 300, and line 2 could register Extension 301 and so on.  If someone calls extension 300, line 1 rings and if no answer goes to the voicemail box for 300.  If someone calls Extension 301, then line 2 on the phone rings and if no answer goes to voicemail for Line 2.
    I do understand what you mean how each phone is it's own "User", and so the way I have it set up now is my 7970 is my user, and it has Extension 300 with voicemail assigned to Button 1 which works fine.
    I just simply need a way so that Extension 301 shows up on Button 2 on the phone, so that I can select that line to make an outbound call (with a different caller ID), and if someone calls Extension 301, then that line on my phone with also ring, BUT will go to the voicemail box for 301.  I don't need my 7970 to light up that there's a vm or anything like that, it just needs to capture the vm.
    If I make a floating extension or extension mobility for a new user with extension 301 and enable voicemail, then calling 301 does go to its voicemail box, but I'm just not sure how I would have that show up on my 7970 as line 2 and ring on there and make outbound calls on there as well.  Thank you so much!

  • Setup Email Button for Multiple Emails

    Is there a way to setup an email button or link within a form that with each click it sends to a different email address or when you click it allows you to pick an email address from a pre-approved list to send it to?

    Open the "Properties" for the drop down field. On the "Options" tab enter the name in the "Item" option and the email address in the 'Export Value'. Now the value of the field will be the 'export value' for the selected item.
    i assume you know how to write the code for creating an email.

  • Common utility library for multiple websites (PHP/Dreamweaver)?

    I am working on several PHP-based websites, and would like to
    use the same utilities in
    them all. The local directories for the individual websites
    are all subdirectories of the
    website D: Websites.
    I could fairly readily put the utilities in a website D:
    Websites/Utilities, put a copy of
    this directory in the root directory of each website on the
    server, and tell PHP to load
    the utilities from the correct place, according to whether
    I'm running on the local or the
    remote server, but Dreamweaver does not seem to have any
    provision which would allow me to
    use it to upload new versions of the utilities from the
    Common local area to the remote
    servers. Is there any way to do this, or will I have to write
    a special PHP utility?

    Clancy wrote:
    > Dreamweaver does not seem to have any provision which
    would allow me to
    > use it to upload new versions of the utilities from the
    Common local area to the remote
    > servers.
    Dreamweaver is site based, and it works on the assumption
    that the site
    folder is the server root. This was appropriate in the early
    days of
    Dreamweaver when sites were created with static HTML and
    everything
    needed to be in the server root. It's less convenient when
    building
    dynamic sites that rely on libraries located outside the
    server root.
    Several beta testers have urged Adobe to improve the site
    definition
    setup so that libraries outside the server root can be easily
    maintained
    and uploaded from within Dreamweaver. Unfortunately, Adobe
    has not
    changed the way sites are defined to meet this increasingly
    common
    scenario. The more people who submit formal requests for this
    to happen,
    the more likely Adobe is to respond. Submit a feature request
    here:
    http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    David Powers, Adobe Community Expert
    Author, "The Essential Guide to Dreamweaver CS4",
    "PHP Solutions" & "PHP Object-Oriented Solutions"
    http://foundationphp.com/

  • Common internal order for multiple company codes.

    Hi All
    Can I have one statistical internal order which can be used at more than on Company code where controlling is common for all company codes.
    Thanks in advance
    reg
    S. Habib Pasha.

    Hi Sasi
    Thank you.
    I understand that Internal orders are Company code depended.  but,  at out client business, they need same internal order at difference comapany codes which are under one controlling area.
    Just looking, whether is there any possibility for same.
    reg
    S. Habib Pasha.

  • Custom "Go" Button for vertical Dashboard Prompts

    Hello All,
    I have to create single GO button for multiple prompts on dashboard.
    I am following below blogs but getting Error like "Exception OccurredReferenceError: GFPDoFilters_samvi is not defined" Or some Object Error.
    http://obieeone.com/2009/06/16/custom-go-button-for-vertical-dashboard-prompts/
    http://obiee-bi.blogspot.in/2011/04/obiee-using-single-go-button-for-all.html
    Can anybody help me.......
    Pradip

    Hi,
    First follow the forum Etiquette, see this http://forums.oracle.com/forums/ann.jspa?annID=939
    You have to close the answered threads...
    And regarding your question
    Go to {OracleBIDir}:\oraclebi\web\msgdb\l_en\messages
    Open globalfiltermessages.xml file.
    Find this text
    <WebMessage name="kmsgGFPGo"><TEXT>Go</TEXT></WebMessage>
    Now edit the Go which is there between the TEXT tags..
    Ex: i am editing Go to Confirm
    <WebMessage name="kmsgGFPGo"><TEXT>Confirm</TEXT></WebMessage>
    Save this file and just restart your presentation service.
    Check your dashboard prompt now...
    (Editing this post from here)
    As per your requirement edit should be:
    <WebMessage name="kmsgGFPGo"><TEXT>Set Prompt Values</TEXT></WebMessage>
    Re: how to create Global Go button
    Re: Additional GO button:
    Hope this help's
    Thanks
    Satya

  • How to remove go button for prompt

    Hi everyone,
    I got a requirement from client asking to remove 'GO' button for prompts which has single value to select and have go button for those which need multiple select values.
    If prompt has one select value the report has to change based the selection of value no need to press go button.
    Will it be possible to remove 'GO' button for some prompt filter and have for others .
    Thanks in advance.
    Regards
    Sandeep

    Sandeep,
    I think it's not possible to remove the 'GO' button for prompts. If you need to rename the 'GO' button, follow the below steps.
    Go to {OracleBIDir}:\oraclebi\web\msgdb\l_en\messages and Open the globalfiltermessages.xml file.
    Find this text
    <WebMessage name="kmsgGFPGo"><TEXT>Go</TEXT></WebMessage>
    Edit the 'Go' which is there between the TEXT tags.. for e.g.., replace the Go with Confirm
    <WebMessage name="kmsgGFPGo"><TEXT>Confirm</TEXT></WebMessage>
    Thanks,
    Balaa...

  • Can I use the "same" button multiple times for multiple galleries?

    OK so I am extremely untrained in CS4 and Actionscript. However I have managed to get along fairly well until I started to dynamically upload images as a gallery. This works great if I have one gallery, but for my site I have 9 galleries!!! I have a back and next button, but I want to be able to use those same buttons for all of the galleries so they look the same. I have split them up and renamed them, but I am clueless on how to script the buttons to work. Please help...and don't laugh at my poor scripting. This is what I have now because I do not know where to put the other button names without getting errors.
    stop();
    next_btn .addEventListener(MouseEvent.CLICK, nextImage);
    var imageNumber: Number=1;
    function checkNumber(): void{
        next_btn.visible=true;
        back_btn.visible=true;
        if(imageNumber==15){
            trace(imageNumber);
        next_btn.visible=false;
        if(imageNumber==1){
            trace(imageNumber);
        back_btn.visible=false;
    function nextImage(evtObj:MouseEvent):void {
        imageNumber++;
        mc_engagement.source= "photo/engagement/en0"+imageNumber+".jpg";
        mc_amish.source= "photo/amish/Amish"+imageNumber+".jpg";
        mc_chicago.source= "photo/chicago/ch"+imageNumber+".jpg";
        mc_landscapes.source= "photo/landscapes/land"+imageNumber+".jpg";
        mc_goodvsevil.source= "photo/goodvsevil/ge"+imageNumber+".png";
        mc_animals.source= "design/animals/an"+imageNumber+".png";
        mc_icons.source= "design/icons/icon0"+imageNumber+".png";
        mc_objects.source= "design/objects/pc"+imageNumber+".png";
        mc_typography.source= "design/typography/type"+imageNumber+".png";
        checkNumber();
    back_btn .addEventListener(MouseEvent.CLICK, backImage);
    function backImage(evtObj:MouseEvent):void {
        imageNumber--;
        mc_engagement.source= "photo/engagement/en0"+imageNumber+".jpg";
        mc_amish.source= "photo/amish/Amish"+imageNumber+".jpg";
        mc_chicago.source= "photo/chicago/ch"+imageNumber+".jpg";
        mc_landscapes.source= "photo/landscapes/land"+imageNumber+".jpg";
        mc_goodvsevil.source= "photo/goodvsevil/ge"+imageNumber+".png";
        mc_animals.source= "design/animals/an"+imageNumber+".png";
        mc_icons.source= "design/icons/icon0"+imageNumber+".png";
        mc_objects.source= "design/objects/pc"+imageNumber+".png";
        mc_typography.source= "design/typography/type"+imageNumber+".png";
        checkNumber();

    I'm still a novice with Flash myself, but I have two comments.
    First, at this point, won't your buttons control all galleries at the same time? Which means, if I go to image 5 in one gallery, then move to another gallery, I'll start at image 5, because the actions are all connected.
    Second, you can definitely use the same buttons for multiple galleries. It seems to me that as long as you've assigned the buttons an instance name, these actions should already work to control all the galleries (see the note above). I guess I would need to understand a bit more about how your project is built.

Maybe you are looking for