Common ringtones/photos for groups of people

Is there a way to assign a ringtone and picture to a group of people? LIke for all of my office mates I have the company listed for them and I'd like to use the company logo as the picture with a ringtone for all of them. There is just a lot of people to modify individually though.
Thanks

Only by individual.

Similar Messages

Set different ringtone for different group of people

I can not set different ringtomes within iphone 4s for different group people in order to know the different rigntone from which group of people.

You can't and need to assign the ringtones to your contacts on by one.

What is the best way to present favorite photos for a group of people

What is the best way to present your favorite photos for a group presentation?? I use iPhoto library. I also have Aperture downloaded on my iMac. Not too familiar with Aperture. It is for a milestone birthday.

I think it's easiest to work from iPhoto. When I had to do a similar presentation for a birthday bash, I loaded the picts from my camera and some from my computer into iPhoto on a relative's MacBook Pro avalable at the site. It did not take a lot of time or trouble.
iPhoto allows fairly easy options for presenting the slide show , including various transitions and putting a sound track underneath.
Regardless of whether the presentation was or wasn't less elegant than what some more expensive software could do, the attendees loved what we did for that bash.
Never used Aperture so I don't know what it can do. You could ask in the Aperature forums here:
Aperture

How do I make groups for texting multiple people at a time and retain that group for future use?

How do I make goups, in Contacts, for texting multiple people at a time and retain that group for future use?

How do I make goups, in Contacts, for texting multiple people at a time and retain that group for future use?

How to send a text message to a group of people and save the list for next time?

how to send a text message to a group of people and save the list for next time from an iphone 4s?

Hey there ipremacha,
It sounds like you need to enable Text Message Forwarding on your iPhone for your iPad to send MMS/SMS messages through your phone.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity
Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
Thank you for using Apple Support Communities.
Regards,
Sterling

I want to create a distinct (default) ringtone for calls from people not in my address book?

I want to have one default ringtone for calls from people who are not in my address book. I would also have a distinct ( different) ringtone for those people IN my address book.

Seastar214 wrote:
I want to have one default ringtone for calls from people who are not in my address book. I would also have a distinct ( different) ringtone for those people IN my address book.
Then do that.

On the IPhone 5, is it possible to set up a Contact entry for a group of people?

On the IPhone 5, is it possible to set up a Contact entry for a group of people, and, if so, how?

"groups"
true... there are many basic functions in which apple loves to stay 10 years behind competitiors by design. my 2001 nokia could do that.

Multiple Groups, Same People, Multiple Different Email Addresses Per Group

I have some groups I need to set up, let's call them the GroupsIN, GroupsOUT and GROUPS.
These groups have the same members, two people with two and three email addresses respectively. Let's say their addresses are:
Rhonda Rodeo:
[email protected]
[email protected]
Clarissa Cowgirl:
[email protected]
[email protected]
[email protected]
This is how I'd like to set the groups up:
GroupsIN:
[email protected]
[email protected]
GroupsOUT:
[email protected]
[email protected]
[email protected]
GROUPS:
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
So, that's three groups with two persons and separate email groupings for each, one of which would contain all the email addresses for those persons.
I've looked in the archives and don't see anything that specifically addresses this and can't see an obvious way to do it in "Edit Distribution List". I could do it by creating new alternate names for each of these persons such as R Rodeo and C Cowgirl as group one, RRodeo and Ccowgirl for group two and Ronda Rodeo and Clarissa Cowgirl for group three, but I use the address book to sync my Palm phone and I don't want all those extra names and addresses in there and it would just get generally confusing that way.
Is there another way?
JoeL

If a Group member has more than one email address and you want to send to all email addresses for the member when addressing a message to the Group, the member with more than one email address needs to be copied within the Group for each email address.
If a Group member has 3 email addresses and you want to send to all email addresses for this member when addressing a message to the Group, this Group member must have 3 entries in the Group which can be done via copy and paste for the member within the Group and then use Edit Distribution list selecting a different email address for each Group member.
This is the only way that I'm aware of.

How can I publish an App to a selceted group of people without using the Adobe Contetn Viewer?

How can I publish an App to a selected group of people ( not via App Store) without using the Adobe Content Viewer?
The App was developed with InDesign 6.0

You'd have to sign up for an Apple Developer account and then gather all the UDID's (Apple limits this to only 100 devices) that you want your app to be installed on. Create your mobile provisioning profiles to include these ID's and then you could use TestFlight to push out your app and monitor who has installed it. Of course Testflight is intended for monitoring your apps performance but I'm sure you can get away with it if you use it to push you app. One thing to keep in mind is the mobile provisoning profiles are only valid for 1 year. Hope this helps.

Profile Manager Settings for Group does not display for individual members of the group

Hi there,
Can anyone confirm whether I am going mad or not, I and new to Mac Server and have set up Profile Manager on OSX Mavericks from scratch and have been using it successfully to deploy enterprise iPads. I have just gone to edit the profile as we wish to increase the timeout time to locking and have been greeted with something strange.
We have all users in a Group which has settings applied for timeout, pass code change etc. however if I go to an individual account who is part of that group then it isn't showing any settings for that user and it would appear I need to set them again. Similarly if I go to a device belonging to a member of the group then its not showing any settings for that device.
I would have assumed that if you set restrictions for a group then when you view the restrictions for a member of the group then it would be the same however it appears that you can have a separate payload for a group. Is this the case?
I am grateful for any advice people can give me.
Thanks again.
Rob

I would have assumed that if you set restrictions for a group then when you view the restrictions for a member of the group then it would be the same
That was never the way it worked in older versions of 10.3, 10.4, 10.5, 10.6 Server.
The restrictions for a Group were shown for a Group. The restrictions for a User (alone) were shown for that User.
And the advantage is that if you see something wrong for a single user, you might be tempted to fix it there, in that user, and when you had changed six of them, you might remember that you meant that to be a group setting after all.
And the software to implement them separately is simpler, but YOU have to test it to find out the end results of compositing Group and User settings.

Best way to prepare photos for iPhoto printed book

Hello,
I was wondering what would be the best way to prepare photos for iPhoto printed book on a Macbook Pro so to achieve the most realistic results to what's on the screen
ie. which software should I use to change photos from RGB to CMYK, photoshop or iPhoto itself. I'm guessing maybe the autofix feature in iPhoto? (I don't have Aperture)
Secondly, which monitor color setting should I set the screen at? I'm guessing it's either Apple RGB or Colour LCD, maybe even ColorMatch RGB?
Any any other tips that people can give in achieving the most realistic results to what you have on the screen when your printed iPhoto book gets sent back. I don't want the mid tones to disappear or become too bright because the gamma and color settings were different to what they use at the other end.
Many thanks.

Hi,
The situation has changed a little, our original photos are in RAW format and some of them are slightly over saturated in the higher tones.
I've read on other threads that it is a good idea to run the 'Enhance' tool on all photos before sending the iPhoto Book away.
Since iPhoto's 'Enhance' tools seems to do a lot of helpful things like sharpen, adjust the levels, etc it also seems to notch the contrast up and this would prove destructive for the lighter and darker tones not captured by the camera's dynamic range.
So as I've been advised it's best to use Apple's own tools before sending the iPhoto Book away, so I'm going to download the trial of Aperture.
Does anyone have any more recommendations on which monitor colour profile setting to use etc. I've also read that iPhoto prints best from JPEGS so the RAW will obviously need changed. Will Aperture automatically save to Profile name: Camera RGB Profile after I've done some editing there?
What would be the best way to prepare RAW images in aperture where some of them might need an Image Overlay in Photomatix then imported back to Aperture for printing an Apple/iPhoto style Book?
Many thanks

What happened to the Sepia feature in the new Photos for Mac?

I used to convert pictures to Sepia in Aperture, but have not been able to find the ability to do so in the new Photos app. Does that feature not exist?

JimN wrote:
I brought up Help and this is what it suggests: "Insert a blank disk and click Burn Disc (at the bottom of the iTunes window)." but when I look at my iTunes window, there is no "Burn Disc" shown at the bottom of the window.
Apple does not seem to be too good with keeping iTunes’ Help current or providing thorough explanations. For instance, the sorting fields were introduced in iTunes 7.1, but no information about those fields were ever in the help screens. Now that they are finally referenced in iTunes Help, the only mention of the sorting fields is a single line stating,
Click the Sorting tab and enter custom text to sort by.
on a help page about tagging songs for grouping and sorting. If Microsoft can provide general explanation with links to more detailed explanations, detailed instructions and provide examples as to how and why a feature may be used, then Apple being known for creating more user-friendly products should be at least as thorough if not have help screens that blow anything in office away.
For one, iTunes Help should include an index that allows one to find pages/articles that reference a feature?

HT3529 How do you send a message to a group of people. I want to invite our local friends to a birthday party. I have created a group called "Centerville Gang". The group has about 12 people in it. Is there a way I can select this group to receive thi

I want to invite 12 people to a birthday party. I have created a group called "Centerville Gang" I want to send just one message to all of these people. I would think there would be a way to select this group as the recipients once instead of doing 12 searches through my contacts to get all of the members in the group but I cant seem to figure it out. I must be missing something. Can you help?

Contact groups do not allow for group emailing. they are just an organizational tool for the contacts list.

LMS 3.2 Common Services User Defined Groups problem

CiscoWorks LMS 3.2 is installed on Windows 2008 64-bit server.
All devices are added into appropriate User defined group in Groups/Common Services.
All groups are fine except that Members of group named Switch-HO-access have been copied also to group named Router-Branch by system for unknown reasons.
At few files we have noticed errors :
" FATAL com.cisco.nm.xms.ogs.server.OGSServer main Exception while OGS Server start up: CTMRegistry::startRegistryServer() : Can't find/start registry server " and
" com.cisco.nm.xms.ogs.util.OGSException: CTMRegistry::startRegistryServer() : Can't find/start registry server ".
What is the reason for copying this devices and is there some other underlying problem?

it seems that the errors you see correlate with regular stopping/starting of the LMS processes (dmgtd) so this would be a normal behaviour.
Can you provide a screenshot of the problem you describe and also the rule for the group Switch-HO-access and Router-Branch

How to create common file systems for both development & quality systems

Hello Team
Need some calrification & advise
we are planning to install ECC6 with EHP5 on AIX7.1 with DB2 9.7 version on single physical server ( NO Virutal IP'S) for both development(SID : D10 & System number 20) & quality(SID : Q10 & System number 20) systems.And it will be running in single LPAR for development & quality systems.
please advise me how can we create the below common file systems for both development & quality to avoid file permission & installation issues.
/sapmnt/<SID>
/usr/sap/
/usr/sap/trans/
/db2/IBM
Thanks in advance & Regards
BM

Thanks you Juan for your response
We are planning for seperate DB instance only.
what could be the owner(UID) & group(GID) for the below file systems
/sapmnt/
usr/sap/
usr/sap/trans
Thanks in advance
BM

Common ringtones/photos for groups of people

Similar Messages

Maybe you are looking for