Common Settings Failed during EPM11 Config

I am relieved but a bit perturbed by this issue. I spent 1 full day trying to install EPM 11 in a VM for a demo. Never had a problem after having done dozens of installations.
I used a set of install files I downloaded months ago which have always run fine???
This time I could not get past Common Settings which failed repeatedly on
FileNotFoundException: C:\Hyperion\common\config\9.5.0.0\reg.properties (The system cannot find the file specified)
Thinking I missed a zip, I reinstalled all the zip files and reran them selecting "skip files that are installed' assuring every file needed was there.
Well finally I took a long nap. When I woke up refreshed I looked for the file and my eyes were seeing much better.
The rogue file is named 'registry.properties' Hmmmm Oracle "Whats up with that?...more of a Microsoft type error"
I renamed the file to 'reg.properties' and the Common Settings passed.

Hello, HyperionQuest;
I could not see the relevance of this posting to Enterprise Mangager (EM) Grid Control High Availability forum. Sorry I didn't see it earlier. Kindly post this message to EPM forums, or you may want to log an SR to look further into this setup.
Thank you,
Farouk

Similar Messages

  • Why does a motion control unit constantly fail during config

    Why does a drive fail during config.... I am trying to control a machine using faulhaber motors (5 of them) with faulhaber controls, one drive fails during config (fatally fails) and it is not wired any different to any of the others... even with only 24v supply, it dies... Blue screen and restart of pc... the others all worked perfectly, with no fault. The process we are using for the troublesome drive is exactly the same... We are stuck, can anyone please help?

    thank you, but faulhaber are all on holiday, and I am really struggling..... tis only one unit and only when it is positioned in one place... checked all electrical connections, no shorts, no loose wires, even fails when just power and serial connected.... so not even motor problem.....

  • Have problems to get video capabilities(vendor config) of phone if Override Common Settings not checked

    Hi,
    I try to get video capabilities(vendor config) by using following Query:
    CUCM Version 8
    Tables (depands of size):devicexml4k, devicexml8k,  devicexml16k
    Query
    SELECT
         devicexml4k.xml
    FROM
         device, devicexml4k
    WHERE
         device.pkid = devicexml4k.fkdevice
    AND
         device.pkid = "pkid_of_phone';
    Phone Configuration
    If the checkbox Override Common Settings next to Video Capabilities is checked, then i get my video capabilities. Otherwise i don't get them.
    The method getPhone outputs the same result.
    My Question
         -Do you know in which table in the database I can find the default settings for the video capabilities for the phone?
         -or any ideas how I can solve the problem?
    Thanks,
    Sergej

    I just experienced an issue with a customer, unless I checked in the box to Override Common Settings, the video capabilities on the phone devices was still defaulted to NO.
    What is "Override Common Settings"?  It is available to select under "Enterprise Phone Configuration", under "Common Phone Profile, and under the device settings of a phone.  What does it actually do?
    Thanks
    Jesse

  • Loading Modules and Mounting Local Filesystems failed during boot

    Hi all,
    since 2-3 weeks I've had some FAIL during the boot (after having upgraded the system, I remember that there was involved an upgrade of init script probably, or something connected with the booting process).
    [gianluca@gianluca-laptop ~]$ dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
    [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ba60000 (usable)
    [ 0.000000] BIOS-e820: 000000007ba60000 - 000000007babf000 (reserved)
    [ 0.000000] BIOS-e820: 000000007babf000 - 000000007bb80000 (usable)
    [ 0.000000] BIOS-e820: 000000007bb80000 - 000000007bbbf000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007bbbf000 - 000000007bbe2000 (usable)
    [ 0.000000] BIOS-e820: 000000007bbe2000 - 000000007bbf7000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007bbf7000 - 000000007bc00000 (usable)
    [ 0.000000] BIOS-e820: 000000007bc00000 - 0000000080000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.6 present.
    [ 0.000000] DMI: Acer Aspire 1810TZ/JM11-MS, BIOS v1.3314 08/31/2010
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x7bc00 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-through
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask FC0000000 write-back
    [ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 2 base 040000000 mask FC0000000 write-back
    [ 0.000000] 3 base 07C000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 07BC00000 mask FFFC00000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] initial memory mapped : 0 - 01c00000
    [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
    [ 0.000000] RAMDISK: 7b8a0000 - 7ba50000
    [ 0.000000] Allocated new RAMDISK: 3764e000 - 377fdbda
    [ 0.000000] Move RAMDISK from 000000007b8a0000 - 000000007ba4fbd9 to 3764e000 - 377fdbd9
    [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
    [ 0.000000] ACPI: XSDT 7bbf6120 0006C (v01 ACRSYS ACRPRDCT 00000001 01000013)
    [ 0.000000] ACPI: FACP 7bbf4000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: DSDT 7bbe8000 073EA (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: FACS 7bb8d000 00040
    [ 0.000000] ACPI: DMAR 7bbf5000 00068 (v01 ? 00000001 00000000)
    [ 0.000000] ACPI: HPET 7bbf3000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: APIC 7bbf2000 0006C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: MCFG 7bbf1000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: ASF! 7bbf0000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: SLIC 7bbe7000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: BOOT 7bbe6000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: SSDT 7bbe2000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1092MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0007bc00
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[5] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009e
    [ 0.000000] 0: 0x00000100 -> 0x0007ba60
    [ 0.000000] 0: 0x0007babf -> 0x0007bb80
    [ 0.000000] 0: 0x0007bbbf -> 0x0007bbe2
    [ 0.000000] 0: 0x0007bbf7 -> 0x0007bc00
    [ 0.000000] On node 0 totalpages: 506587
    [ 0.000000] free_area_init_node: node 0, pgdat c14a1980, node_mem_map f66d5200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3950 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 2185 pages used for memmap
    [ 0.000000] HighMem zone: 277190 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27648 r0 d21504 u1048576
    [ 0.000000] pcpu-alloc: s27648 r0 d21504 u1048576 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 502626
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/2bef0cce-027d-44fa-a086-056c390cd847 ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    [ 0.000000] allocated 8109824 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] ------------[ cut here ]------------
    [ 0.000000] WARNING: at drivers/pci/dmar.c:634 warn_invalid_dmar+0x98/0xb0()
    [ 0.000000] Hardware name: Aspire 1810TZ
    [ 0.000000] Your BIOS is broken; DMAR reported at address 0!
    [ 0.000000] BIOS vendor: INSYDE; Ver: v1.3314; Product Version: v1.3314
    [ 0.000000] Modules linked in:
    [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.39-ARCH #1
    [ 0.000000] Call Trace:
    [ 0.000000] [<c1046112>] warn_slowpath_common+0x72/0xa0
    [ 0.000000] [<c11e3dd8>] ? warn_invalid_dmar+0x98/0xb0
    [ 0.000000] [<c11e3dd8>] ? warn_invalid_dmar+0x98/0xb0
    [ 0.000000] [<c10461a2>] warn_slowpath_fmt_taint+0x32/0x40
    [ 0.000000] [<c11e3dd8>] warn_invalid_dmar+0x98/0xb0
    [ 0.000000] [<c14cba32>] check_zero_address+0x57/0x12b
    [ 0.000000] [<c12250cd>] ? acpi_get_table_with_size+0x59/0xb3
    [ 0.000000] [<c14cbb18>] detect_intel_iommu+0x12/0x78
    [ 0.000000] [<c14ad67e>] pci_iommu_alloc+0x35/0x5a
    [ 0.000000] [<c14b92c3>] mem_init+0xe/0x26d
    [ 0.000000] [<c14c3396>] ? __alloc_bootmem_node_nopanic+0x72/0x98
    [ 0.000000] [<c1342afc>] ? printk+0x1d/0x1f
    [ 0.000000] [<c14c5183>] ? page_cgroup_init_flatmem+0x8f/0xbc
    [ 0.000000] [<c14a85cc>] start_kernel+0x1a0/0x357
    [ 0.000000] [<c14a81bd>] ? loglevel+0x18/0x18
    [ 0.000000] [<c14a80b3>] i386_start_kernel+0xb3/0xb9
    [ 0.000000] ---[ end trace a7919e7f17c0a725 ]---
    [ 0.000000] Disabling lock debugging due to kernel taint
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0007bc00)
    [ 0.000000] Memory: 1993572k/2027520k available (3376k kernel code, 32776k reserved, 1390k data, 512k init, 1117500k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc14a8000 - 0xc1528000 ( 512 kB)
    [ 0.000000] .data : 0xc134c3bf - 0xc14a7c00 (1390 kB)
    [ 0.000000] .text : 0xc1000000 - 0xc134c3bf (3376 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptable hierarchical RCU implementation.
    [ 0.000000] RCU-based detection of stalled CPUs is disabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:512
    [ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 1296.656 MHz processor.
    [ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.36 BogoMIPS (lpj=4322186)
    [ 0.003344] pid_max: default: 32768 minimum: 301
    [ 0.003415] Security Framework initialized
    [ 0.003422] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003458] Mount-cache hash table entries: 512
    [ 0.003763] Initializing cgroup subsys ns
    [ 0.003768] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [ 0.003772] Initializing cgroup subsys cpuacct
    [ 0.003793] Initializing cgroup subsys memory
    [ 0.003809] Initializing cgroup subsys devices
    [ 0.003813] Initializing cgroup subsys freezer
    [ 0.003816] Initializing cgroup subsys net_cls
    [ 0.003819] Initializing cgroup subsys blkio
    [ 0.003876] CPU: Physical Processor ID: 0
    [ 0.003879] CPU: Processor Core ID: 0
    [ 0.003883] mce: CPU supports 6 MCE banks
    [ 0.003894] CPU0: Thermal monitoring enabled (TM2)
    [ 0.003899] using mwait in idle threads.
    [ 0.005672] ACPI: Core revision 20110316
    [ 0.016682] ftrace: allocating 15225 entries in 30 pages
    [ 0.020059] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.023598] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.056606] CPU0: Genuine Intel(R) CPU U4100 @ 1.30GHz stepping 0a
    [ 0.056663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [ 0.056663] ... version: 2
    [ 0.056663] ... bit width: 40
    [ 0.056663] ... generic registers: 2
    [ 0.056663] ... value mask: 000000ffffffffff
    [ 0.056663] ... max period: 000000007fffffff
    [ 0.056663] ... fixed-purpose events: 3
    [ 0.056663] ... event mask: 0000000700000003
    [ 0.073511] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.100013] CPU 1 irqstacks, hard=f54f6000 soft=f54f8000
    [ 0.100017] Booting Node 0, Processors #1
    [ 0.100021] smpboot cpu 1: start_ip = 9a000
    [ 0.006666] Initializing CPU#1
    [ 0.196688] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.203327] Brought up 2 CPUs
    [ 0.203331] Total of 2 processors activated (5188.93 BogoMIPS).
    [ 0.204780] devtmpfs: initialized
    [ 0.204780] PM: Registering ACPI NVS region at 7bb80000 (258048 bytes)
    [ 0.206812] print_constraints: dummy:
    [ 0.206898] NET: Registered protocol family 16
    [ 0.207056] ACPI: bus type pci registered
    [ 0.207200] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.207205] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.207209] PCI: Using MMCONFIG for extended config space
    [ 0.207212] PCI: Using configuration type 1 for base access
    [ 0.207951] bio: create slab <bio-0> at 0
    [ 0.211250] ACPI: EC: Look up EC in DSDT
    [ 0.214102] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.217442] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.218088] ACPI: SSDT 7ba6fc98 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.218783] ACPI: Dynamic OEM Table Load:
    [ 0.218788] ACPI: SSDT (null) 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.219036] ACPI: SSDT 7ba6d598 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.219702] ACPI: Dynamic OEM Table Load:
    [ 0.219706] ACPI: SSDT (null) 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.237115] ACPI: SSDT 7ba6ee18 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.237838] ACPI: Dynamic OEM Table Load:
    [ 0.237843] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.246829] ACPI: SSDT 7ba6ff18 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.247515] ACPI: Dynamic OEM Table Load:
    [ 0.247520] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.257074] ACPI: Interpreter enabled
    [ 0.257081] ACPI: (supports S0 S3 S4 S5)
    [ 0.257124] ACPI: Using IOAPIC for interrupt routing
    [ 0.265711] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
    [ 0.265982] ACPI: No dock devices found.
    [ 0.265985] HEST: Table not found.
    [ 0.265991] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.266509] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.267544] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.267549] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.267553] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.267560] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
    [ 0.267579] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
    [ 0.267613] DMAR: Forcing write-buffer flush capability
    [ 0.267616] DMAR: Disabling IOMMU for graphics on this chipset
    [ 0.267647] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
    [ 0.267668] pci 0000:00:02.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
    [ 0.267681] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.267691] pci 0000:00:02.0: reg 20: [io 0x30d0-0x30d7]
    [ 0.267738] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
    [ 0.267756] pci 0000:00:02.1: reg 10: [mem 0x92400000-0x924fffff 64bit]
    [ 0.267863] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
    [ 0.267945] pci 0000:00:1a.0: reg 20: [io 0x30a0-0x30bf]
    [ 0.268041] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
    [ 0.272125] pci 0000:00:1a.7: reg 10: [mem 0x94504c00-0x94504fff]
    [ 0.296690] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.296698] pci 0000:00:1a.7: PME# disabled
    [ 0.296734] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
    [ 0.296759] pci 0000:00:1b.0: reg 10: [mem 0x94500000-0x94503fff 64bit]
    [ 0.296845] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.296852] pci 0000:00:1b.0: PME# disabled
    [ 0.296883] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
    [ 0.296968] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.296974] pci 0000:00:1c.0: PME# disabled
    [ 0.297011] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
    [ 0.297098] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.297105] pci 0000:00:1c.3: PME# disabled
    [ 0.297148] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
    [ 0.297230] pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f]
    [ 0.297313] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
    [ 0.297391] pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f]
    [ 0.297471] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
    [ 0.297552] pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f]
    [ 0.297646] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
    [ 0.302125] pci 0000:00:1d.7: reg 10: [mem 0x94504800-0x94504bff]
    [ 0.328820] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.328828] pci 0000:00:1d.7: PME# disabled
    [ 0.328858] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [ 0.328949] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601
    [ 0.329112] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
    [ 0.329145] pci 0000:00:1f.2: reg 10: [io 0x30c8-0x30cf]
    [ 0.329159] pci 0000:00:1f.2: reg 14: [io 0x30dc-0x30df]
    [ 0.329172] pci 0000:00:1f.2: reg 18: [io 0x30c0-0x30c7]
    [ 0.329185] pci 0000:00:1f.2: reg 1c: [io 0x30d8-0x30db]
    [ 0.329199] pci 0000:00:1f.2: reg 20: [io 0x3020-0x303f]
    [ 0.329212] pci 0000:00:1f.2: reg 24: [mem 0x94504000-0x945047ff]
    [ 0.329268] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.329274] pci 0000:00:1f.2: PME# disabled
    [ 0.329302] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
    [ 0.329328] pci 0000:00:1f.3: reg 10: [mem 0x94505000-0x945050ff 64bit]
    [ 0.329362] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
    [ 0.329486] pci 0000:01:00.0: [1969:1063] type 0 class 0x000200
    [ 0.329519] pci 0000:01:00.0: reg 10: [mem 0x93500000-0x9353ffff 64bit]
    [ 0.329537] pci 0000:01:00.0: reg 18: [io 0x2000-0x207f]
    [ 0.329645] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.329653] pci 0000:01:00.0: PME# disabled
    [ 0.333336] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.333343] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.333349] pci 0000:00:1c.0: bridge window [mem 0x93500000-0x944fffff]
    [ 0.333360] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref]
    [ 0.333454] pci 0000:02:00.0: [8086:0083] type 0 class 0x000280
    [ 0.333498] pci 0000:02:00.0: reg 10: [mem 0x92500000-0x92501fff 64bit]
    [ 0.333662] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.333671] pci 0000:02:00.0: PME# disabled
    [ 0.340004] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
    [ 0.340011] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
    [ 0.340018] pci 0000:00:1c.3: bridge window [mem 0x92500000-0x934fffff]
    [ 0.340028] pci 0000:00:1c.3: bridge window [mem 0x91400000-0x923fffff 64bit pref]
    [ 0.340121] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
    [ 0.340128] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.340135] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.340145] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.340150] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.340154] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.340158] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.340163] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
    [ 0.340186] pci_bus 0000:00: on NUMA node 0
    [ 0.340192] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.340631] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    [ 0.340734] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
    [ 0.340832] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.340835] Unable to assume _OSC PCIe control. Disabling ASPM
    [ 0.348405] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.348504] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.348599] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.348693] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
    [ 0.348788] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    [ 0.348886] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    [ 0.348981] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.349075] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.349214] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.349232] vgaarb: loaded
    [ 0.349386] PCI: Using ACPI for IRQ routing
    [ 0.349389] PCI: pci_cache_line_size set to 64 bytes
    [ 0.349500] reserve RAM buffer: 000000000009e000 - 000000000009ffff
    [ 0.349504] reserve RAM buffer: 000000007ba60000 - 000000007bffffff
    [ 0.349510] reserve RAM buffer: 000000007bb80000 - 000000007bffffff
    [ 0.349514] reserve RAM buffer: 000000007bbe2000 - 000000007bffffff
    [ 0.349518] reserve RAM buffer: 000000007bc00000 - 000000007bffffff
    [ 0.349695] NetLabel: Initializing
    [ 0.349698] NetLabel: domain hash size = 128
    [ 0.349700] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.349720] NetLabel: unlabeled traffic allowed by default
    [ 0.349740] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [ 0.349748] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.349756] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [ 0.359999] Switching to clocksource hpet
    [ 0.363178] Switched to NOHz mode on CPU #0
    [ 0.363276] Switched to NOHz mode on CPU #1
    [ 0.370116] pnp: PnP ACPI init
    [ 0.370143] ACPI: bus type pnp registered
    [ 0.370722] pnp 00:00: [bus 00-ff]
    [ 0.370727] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.370731] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.370735] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.370739] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.370743] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.370747] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.370751] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.370755] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.370759] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.370763] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.370767] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.370770] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.370774] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.370778] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.370782] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.370786] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.370790] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.370794] pnp 00:00: [mem 0x80000000-0xfebfffff window]
    [ 0.370798] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.370911] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.371140] pnp 00:01: [io 0x002e-0x002f]
    [ 0.371144] pnp 00:01: [io 0x004e-0x004f]
    [ 0.371148] pnp 00:01: [io 0x164e-0x164f]
    [ 0.371151] pnp 00:01: [io 0x0061]
    [ 0.371154] pnp 00:01: [io 0x0070]
    [ 0.371157] pnp 00:01: [io 0x0080]
    [ 0.371160] pnp 00:01: [io 0x0092]
    [ 0.371163] pnp 00:01: [io 0x00b2-0x00b3]
    [ 0.371167] pnp 00:01: [io 0x0063]
    [ 0.371170] pnp 00:01: [io 0x0065]
    [ 0.371173] pnp 00:01: [io 0x0067]
    [ 0.371176] pnp 00:01: [io 0x0600-0x060f]
    [ 0.371180] pnp 00:01: [io 0x0610]
    [ 0.371183] pnp 00:01: [io 0x0800-0x080f]
    [ 0.371186] pnp 00:01: [io 0x0810-0x0817]
    [ 0.371190] pnp 00:01: [io 0x0820-0x0823]
    [ 0.371193] pnp 00:01: [io 0x0400-0x047f]
    [ 0.371196] pnp 00:01: [io 0x0500-0x053f]
    [ 0.371200] pnp 00:01: [mem 0xf8000000-0xfbffffff]
    [ 0.371203] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
    [ 0.371211] pnp 00:01: [mem 0xfed10000-0xfed13fff]
    [ 0.371215] pnp 00:01: [mem 0xfed18000-0xfed18fff]
    [ 0.371218] pnp 00:01: [mem 0xfed19000-0xfed19fff]
    [ 0.371222] pnp 00:01: [mem 0xfec00000-0xfec00fff]
    [ 0.371225] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
    [ 0.371229] pnp 00:01: [mem 0xfed40000-0xfed44fff]
    [ 0.371232] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
    [ 0.371236] pnp 00:01: [mem 0xfee00000-0xfee00fff]
    [ 0.371273] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io 0x1000-0x1fff]
    [ 0.371372] system 00:01: [io 0x0600-0x060f] has been reserved
    [ 0.371377] system 00:01: [io 0x0610] has been reserved
    [ 0.371381] system 00:01: [io 0x0800-0x080f] has been reserved
    [ 0.371386] system 00:01: [io 0x0810-0x0817] has been reserved
    [ 0.371390] system 00:01: [io 0x0820-0x0823] has been reserved
    [ 0.371394] system 00:01: [io 0x0400-0x047f] has been reserved
    [ 0.371399] system 00:01: [io 0x0500-0x053f] has been reserved
    [ 0.371405] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.371410] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.371414] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 0.371419] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.371424] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.371429] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.371434] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.371438] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.371443] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.371448] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.371453] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.371471] pnp 00:02: [io 0x0000-0x001f]
    [ 0.371474] pnp 00:02: [io 0x0081-0x0091]
    [ 0.371478] pnp 00:02: [io 0x0093-0x009f]
    [ 0.371481] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.371485] pnp 00:02: [dma 4]
    [ 0.371537] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.371576] pnp 00:03: [io 0x0070-0x0077]
    [ 0.371630] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.371735] pnp 00:04: [irq 0 disabled]
    [ 0.371750] pnp 00:04: [irq 8]
    [ 0.371753] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [ 0.371809] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.371828] pnp 00:05: [io 0x00f0]
    [ 0.371835] pnp 00:05: [irq 13]
    [ 0.371889] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.371907] pnp 00:06: [mem 0xff800000-0xffffffff]
    [ 0.371965] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.371991] pnp 00:07: [io 0x0060]
    [ 0.371995] pnp 00:07: [io 0x0064]
    [ 0.372003] pnp 00:07: [irq 1]
    [ 0.372061] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.372090] pnp 00:08: [irq 12]
    [ 0.372150] pnp 00:08: Plug and Play ACPI device, IDs SYN1b20 PNP0f13 (active)
    [ 0.372300] pnp: PnP ACPI: found 9 devices
    [ 0.372303] ACPI: ACPI bus type pnp unregistered
    [ 0.409749] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.409755] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.409764] pci 0000:00:1c.0: bridge window [mem 0x93500000-0x944fffff]
    [ 0.409772] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref]
    [ 0.409782] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
    [ 0.409787] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
    [ 0.409795] pci 0000:00:1c.3: bridge window [mem 0x92500000-0x934fffff]
    [ 0.409802] pci 0000:00:1c.3: bridge window [mem 0x91400000-0x923fffff 64bit pref]
    [ 0.409812] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
    [ 0.409815] pci 0000:00:1e.0: bridge window [io disabled]
    [ 0.409823] pci 0000:00:1e.0: bridge window [mem disabled]
    [ 0.409829] pci 0000:00:1e.0: bridge window [mem pref disabled]
    [ 0.409853] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 0.409861] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.409875] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 0.409881] pci 0000:00:1c.3: setting latency timer to 64
    [ 0.409891] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.409897] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.409901] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.409905] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.409909] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
    [ 0.409914] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
    [ 0.409918] pci_bus 0000:01: resource 1 [mem 0x93500000-0x944fffff]
    [ 0.409922] pci_bus 0000:01: resource 2 [mem 0x90400000-0x913fffff 64bit pref]
    [ 0.409927] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
    [ 0.409931] pci_bus 0000:02: resource 1 [mem 0x92500000-0x934fffff]
    [ 0.409935] pci_bus 0000:02: resource 2 [mem 0x91400000-0x923fffff 64bit pref]
    [ 0.409940] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
    [ 0.409943] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
    [ 0.409947] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.409952] pci_bus 0000:03: resource 7 [mem 0x80000000-0xfebfffff]
    [ 0.410023] NET: Registered protocol family 2
    [ 0.410132] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.410465] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.411087] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.411362] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.411366] TCP reno registered
    [ 0.411370] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.411381] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.411559] NET: Registered protocol family 1
    [ 0.411580] pci 0000:00:02.0: Boot video device
    [ 0.440052] PCI: CLS 64 bytes, default 64
    [ 0.440120] Unpacking initramfs...
    [ 0.493687] Freeing initrd memory: 1728k freed
    [ 0.494435] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
    [ 0.494439] Simple Boot Flag at 0x44 set to 0x1
    [ 0.494754] apm: BIOS not found.
    [ 0.494943] audit: initializing netlink socket (disabled)
    [ 0.494958] type=2000 audit(1312551622.493:1): initialized
    [ 0.495391] highmem bounce pool size: 64 pages
    [ 0.495398] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.498715] VFS: Disk quotas dquot_6.5.2
    [ 0.498846] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.499018] msgmni has been set to 1714
    [ 0.499314] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.499357] io scheduler noop registered
    [ 0.499361] io scheduler deadline registered
    [ 0.499380] io scheduler cfq registered (default)
    [ 0.499553] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 0.499624] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.499729] pcieport 0000:00:1c.3: setting latency timer to 64
    [ 0.499792] pcieport 0000:00:1c.3: irq 41 for MSI/MSI-X
    [ 0.500070] intel_idle: MWAIT substates: 0x22220
    [ 0.500074] intel_idle: does not run on family 6 model 23
    [ 0.500082] ERST: Table is not found!
    [ 0.500103] isapnp: Scanning for PnP cards...
    [ 0.857044] isapnp: No Plug & Play device found
    [ 0.857122] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.060716] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
    [ 1.068400] i8042: Detected active multiplexing controller, rev 1.1
    [ 1.071789] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.071804] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 1.071809] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 1.071813] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 1.071818] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 1.072099] mousedev: PS/2 mouse device common for all mice
    [ 1.072185] rtc_cmos 00:03: RTC can wake from S4
    [ 1.086817] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 1.086852] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 1.086887] cpuidle: using governor ladder
    [ 1.086890] cpuidle: using governor menu
    [ 1.087261] TCP cubic registered
    [ 1.087265] NET: Registered protocol family 17
    [ 1.087276] Registering the dns_resolver key type
    [ 1.087307] Using IPI No-Shortcut mode
    [ 1.087437] PM: Hibernation image not present or could not be loaded.
    [ 1.087445] registered taskstats version 1
    [ 1.087957] rtc_cmos 00:03: setting system clock to 2011-08-05 13:40:23 UTC (1312551623)
    [ 1.088039] Initializing network drop monitor service
    [ 1.088128] Freeing unused kernel memory: 512k freed
    [ 1.088469] Write protecting the kernel text: 3380k
    [ 1.088507] Write protecting the kernel read-only data: 1028k
    [ 1.093885] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.106227] udevd[54]: starting version 171
    [ 1.236052] SCSI subsystem initialized
    [ 1.269724] libata version 3.00 loaded.
    [ 1.282619] ahci 0000:00:1f.2: version 3.0
    [ 1.282637] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 1.282703] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
    [ 1.282767] ahci: SSS flag set, parallel bus scan disabled
    [ 1.282814] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
    [ 1.282820] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led pmp pio slum part ccc ems
    [ 1.282828] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.301035] scsi0 : ahci
    [ 1.301194] scsi1 : ahci
    [ 1.301318] scsi2 : ahci
    [ 1.301438] scsi3 : ahci
    [ 1.301557] scsi4 : ahci
    [ 1.301679] scsi5 : ahci
    [ 1.301772] ata1: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504100 irq 42
    [ 1.301778] ata2: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504180 irq 42
    [ 1.301782] ata3: DUMMY
    [ 1.301784] ata4: DUMMY
    [ 1.301788] ata5: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504300 irq 42
    [ 1.301793] ata6: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504380 irq 42
    [ 1.496710] Refined TSC clocksource calibration: 1296.749 MHz.
    [ 1.496717] Switching to clocksource tsc
    [ 1.786699] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.787736] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40C, max UDMA/133
    [ 1.787741] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 1.788946] ata1.00: configured for UDMA/133
    [ 1.789123] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54322 FBEO PQ: 0 ANSI: 5
    [ 2.106690] ata2: SATA link down (SStatus 0 SControl 300)
    [ 2.426689] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.746690] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.760584] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 2.760671] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.760676] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.760709] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.798506] sda: sda1 sda2 sda3 sda4
    [ 2.799028] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.310879] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.653828] udevd[228]: starting version 173
    [ 4.958869] ACPI: acpi_idle registered with cpuidle
    [ 4.959125] Monitor-Mwait will be used to enter C-1 state
    [ 4.959159] Monitor-Mwait will be used to enter C-2 state
    [ 4.959167] Marking TSC unstable due to TSC halts in idle
    [ 4.959208] Switching to clocksource hpet
    [ 5.052561] fuse init (API version 7.16)
    [ 5.094399] acerhdf: Acer Aspire One Fan driver, v.0.5.24
    [ 5.094431] acerhdf: unknown (unsupported) BIOS version Acer/Aspire 1810TZ/v1.3314, please report, aborting!
    [ 5.377790] Linux agpgart interface v0.103
    [ 5.381930] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 5.382452] ACPI: AC Adapter [ACAD] (off-line)
    [ 5.389644] wmi: Mapper loaded
    [ 5.390172] iTCO_vendor_support: vendor-support=0
    [ 5.532413] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [ 5.532424] ACPI: Power Button [PWRB]
    [ 5.532507] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    [ 5.548014] acer_wmi: Acer Laptop ACPI-WMI Extras
    [ 5.550648] acer_wmi: Brightness must be controlled by generic video driver
    [ 5.554953] ACPI: Lid Switch [LID0]
    [ 5.555062] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 5.555072] ACPI: Sleep Button [SLPB]
    [ 5.555166] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 5.555173] ACPI: Power Button [PWRF]
    [ 5.560994] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 5.569140] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 5.569153] ACPI: Battery Slot [BAT1] (battery present)
    [ 5.570951] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 5.573564] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
    [ 5.573653] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 5.602755] usbcore: registered new interface driver usbfs
    [ 5.602793] usbcore: registered new interface driver hub
    [ 5.606733] usbcore: registered new device driver usb
    [ 5.623405] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 5.659329] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 5.659373] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 5.659401] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 5.659407] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 5.659455] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 5.670065] ehci_hcd 0000:00:1a.7: debug port 1
    [ 5.673944] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    [ 5.673971] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x94504c00
    [ 5.690924] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 5.691336] hub 1-0:1.0: USB hub found
    [ 5.691345] hub 1-0:1.0: 2 ports detected
    [ 5.691477] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 5.691508] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 5.691514] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 5.691528] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 5.702271] cfg80211: Calling CRDA to update world regulatory domain
    [ 5.706752] ehci_hcd 0000:00:1d.7: debug port 1
    [ 5.710655] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 5.710683] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x94504800
    [ 5.723379] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 5.723603] hub 2-0:1.0: USB hub found
    [ 5.723610] hub 2-0:1.0: 6 ports detected
    [ 5.724256] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
    [ 5.724463] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 5.725927] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
    [ 5.726502] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
    [ 5.802604] uhci_hcd: USB Universal Host Controller Interface driver
    [ 5.802687] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 5.802702] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 5.802709] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 5.802732] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 5.813675] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030a0
    [ 5.814571] hub 3-0:1.0: USB hub found
    [ 5.814580] hub 3-0:1.0: 2 ports detected
    [ 5.814712] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 5.814725] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 5.814730] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 5.814748] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [ 5.823482] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
    [ 5.824221] hub 4-0:1.0: USB hub found
    [ 5.824230] hub 4-0:1.0: 2 ports detected
    [ 5.824360] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 5.824373] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 5.824378] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 5.824392] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
    [ 5.836745] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
    [ 5.836988] hub 5-0:1.0: USB hub found
    [ 5.836995] hub 5-0:1.0: 2 ports detected
    [ 5.837118] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    [ 5.837130] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 5.837135] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 5.837148] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
    [ 5.846757] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00003040
    [ 5.846997] hub 6-0:1.0: USB hub found
    [ 5.847004] hub 6-0:1.0: 2 ports detected
    [ 5.869833] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 5.909784] [drm] Initialized drm 1.1.0 20060810
    [ 5.926221] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 5.926238] atl1c 0000:01:00.0: setting latency timer to 64
    [ 6.014499] atl1c 0000:01:00.0: version 1.0.1.0-NAPI
    [ 6.022590] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 6.022599] i915 0000:00:02.0: setting latency timer to 64
    [ 6.033370] usb 2-5: new high speed USB device number 2 using ehci_hcd
    [ 6.045183] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
    [ 6.045188] iwlagn: Copyright(c) 2003-2010 Intel Corporation
    [ 6.045269] iwlagn 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 6.045281] iwlagn 0000:02:00.0: setting latency timer to 64
    [ 6.045314] iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
    [ 6.066230] iwlagn 0000:02:00.0: device EEPROM VER=0x15d, CALIB=0x6
    [ 6.066236] iwlagn 0000:02:00.0: Device SKU: 0X9
    [ 6.066240] iwlagn 0000:02:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3
    [ 6.066261] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
    [ 6.066513] iwlagn 0000:02:00.0: irq 43 for MSI/MSI-X
    [ 6.071614] i915 0000:00:02.0: irq 44 for MSI/MSI-X
    [ 6.071623] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 6.071626] [drm] Driver supports precise vblank timestamp query.
    [ 6.167372] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 6.236519] iwlagn 0000:02:00.0: loaded firmware version 39.31.5.1 build 35138
    [ 6.236889] Registered led device: phy0-led
    [ 6.309104] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 6.435863] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
    [ 6.480908] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input6
    [ 6.507822] Linux media interface: v0.10
    [ 6.580021] Linux video capture interface: v2.00
    [ 6.591629] uvcvideo: Found UVC 1.00 device WebCam (064e:a102)
    [ 6.608274] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input7
    [ 6.608368] usbcore: registered new interface driver uvcvideo
    [ 6.608371] USB Video Class driver (v1.0.0)
    [ 6.624890] fbcon: inteldrmfb (fb0) is primary device
    [ 6.671041] Console: switching to colour frame buffer device 170x48
    [ 6.678170] fb0: inteldrmfb frame buffer device
    [ 6.678173] drm: registered panic notifier
    [ 6.679734] acpi device:03: registered as cooling_device2
    [ 6.679988] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
    [ 6.680104] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
    [ 6.680793] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 6.680840] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 6.680937] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 6.680975] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 6.802470] hda_codec: ALC269: BIOS auto-probing.
    [ 6.803832] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
    [ 6.833736] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 6.833855] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 8.406870] EXT4-fs (sda3): re-mounted. Opts: (null)
    [ 8.676079] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 8.886041] Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
    [ 12.277210] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
    [ 12.600410] /dev/vmmon[897]: Module vmmon: registered with major=10 minor=165
    [ 12.600421] /dev/vmmon[897]: Module vmmon: initialized
    [ 12.646908] /dev/vmci[905]: VMCI: Driver initialized.
    [ 12.647204] /dev/vmci[905]: Module vmci: registered with major=10 minor=58
    [ 12.647209] /dev/vmci[905]: Module vmci: initialized
    [ 12.827251] ppdev: user-space parallel port driver
    [ 13.786476] /dev/vmnet: open called by PID 979 (vmnet-dhcpd)
    [ 13.786488] /dev/vmnet: hub 1 does not exist, allocating memory.
    [ 13.786521] /dev/vmnet: port on hub 1 successfully opened
    [ 13.801438] /dev/vmnet: open called by PID 981 (vmnet-netifup)
    [ 13.801452] /dev/vmnet: port on hub 1 successfully opened
    [ 13.854670] /dev/vmnet: open called by PID 983 (vmnet-dhcpd)
    [ 13.854683] /dev/vmnet: hub 8 does not exist, allocating memory.
    [ 13.854720] /dev/vmnet: port on hub 8 successfully opened
    [ 13.915864] /dev/vmnet: open called by PID 987 (vmnet-natd)
    [ 13.915881] /dev/vmnet: port on hub 8 successfully opened
    [ 13.936302] /dev/vmnet: open called by PID 988 (vmnet-netifup)
    [ 13.936317] /dev/vmnet: port on hub 8 successfully opened
    [ 38.702663] NET: Registered protocol family 10
    [ 38.704338] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 38.704788] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 39.752832] EXT4-fs (sda3): re-mounted. Opts: commit=600
    [ 40.413933] EXT4-fs (sda4): re-mounted. Opts: commit=600
    [ 48.976756] vmnet8: no IPv6 routers present
    [ 49.523376] vmnet1: no IPv6 routers present
    [ 105.125369] wlan0: authenticate with 00:15:e9:27:b5:38 (try 1)
    [ 105.127031] wlan0: authenticated
    [ 105.137382] wlan0: associate with 00:15:e9:27:b5:38 (try 1)
    [ 105.140390] wlan0: RX AssocResp from 00:15:e9:27:b5:38 (capab=0x471 status=0 aid=1)
    [ 105.140396] wlan0: associated
    [ 105.144018] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 105.447100] /dev/vmnet: open called by PID 971 (vmnet-bridge)
    [ 105.447115] /dev/vmnet: hub 0 does not exist, allocating memory.
    [ 105.447150] /dev/vmnet: port on hub 0 successfully opened
    [ 105.447175] bridge-wlan0: device is wireless, enabling SMAC
    [ 105.447181] bridge-wlan0: up
    [ 105.448675] bridge-wlan0: attached
    [ 107.324643] wlan0: deauthenticating from 00:15:e9:27:b5:38 by local choice (reason=3)
    [ 107.400201] cfg80211: Calling CRDA to update world regulatory domain
    [ 107.423712] bridge-wlan0: disabling the bridge
    [ 107.440034] bridge-wlan0: down
    [ 107.440043] bridge-wlan0: detached
    [ 107.440111] /dev/vmnet: open called by PID 971 (vmnet-bridge)
    [ 107.440124] /dev/vmnet: hub 0 does not exist, allocating memory.
    [ 107.440157] /dev/vmnet: port on hub 0 successfully opened
    [ 107.440172] bridge-wlan0: device is wireless, enabling SMAC
    [ 107.440177] bridge-wlan0: up
    [ 107.440182] bridge-wlan0: attached
    [ 107.860411] bridge-wlan0: disabling the bridge
    [ 107.869871] wlan0: authenticate with 00:15:e9:27:b5:38 (try 1)
    [ 107.872071] wlan0: authenticated
    [ 107.872466] wlan0: associate with 00:15:e9:27:b5:38 (try 1)
    [ 107.875411] wlan0: RX ReassocResp from 00:15:e9:27:b5:38 (capab=0x471 status=0 aid=1)
    [ 107.875417] wlan0: associated
    [ 107.876696] bridge-wlan0: down
    [ 107.876705] bridge-wlan0: detached
    [ 107.904358] /dev/vmnet: open called by PID 971 (vmnet-bridge)
    [ 107.904374] /dev/vmnet: hub 0 does not exist, allocating memory.
    [ 107.904409] /dev/vmnet: port on hub 0 successfully opened
    [ 107.904423] bridge-wlan0: device is wireless, enabling SMAC
    [ 107.904428] bridge-wlan0: up
    [ 107.905917] bridge-wlan0: attached
    [ 118.910106] wlan0: no IPv6 routers present
    This is the output of /var/log/boot
    Fri Aug 5 15:40:30 2011: :: Adjusting system time and setting kernel timezone ^[[71G [BUSY] ^[[71G [DONE]
    Fri Aug 5 15:40:30 2011: :: Starting UDev Daemon ^[[71G [BUSY] ^[[71G [DONE]
    Fri Aug 5 15:40:30 2011: :: Triggering UDev uevents ^[[71G [BUSY] ^[[71G [DONE]
    Fri Aug 5 15:40:30 2011: :: Loading Modules ^[[71G [BUSY] ^[[71G [FAIL]
    Fri Aug 5 15:40:30 2011: :: Waiting for UDev uevents to be processed ^[[71G [BUSY] ^[[71G [DONE]
    Fri Aug 5 15:40:30 2011: :: Bringing up loopback interface ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:30 2011: :: Checking Filesystems ^[[161G [BUSY] /dev/sda3: clean, 190178/480496 files, 1530694/1921775 blocks
    Fri Aug 5 15:40:30 2011: /dev/sda4: clean, 49123/14761984 files, 38814365/59034858 blocks
    Fri Aug 5 15:40:30 2011: /dev/sda1: clean, 30/26104 files, 19115/104388 blocks
    Fri Aug 5 15:40:30 2011: ^[[161G [DONE]
    Fri Aug 5 15:40:30 2011: :: Remounting Root Read/Write ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:30 2011: :: Creating mtab ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:30 2011: :: Mounting Local Filesystems ^[[161G [BUSY] ^[[161G [FAIL]
    Fri Aug 5 15:40:31 2011: :: Activating Swap ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:31 2011: :: Configuring Time Zone ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:31 2011: :: Initializing Random Seed ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:31 2011: :: Removing Leftover Files ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:31 2011: :: Setting Hostname: gianluca-laptop ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:31 2011: :: Setting Locale: en_GB.UTF-8 ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:31 2011: :: Setting Consoles to UTF-8 mode ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:32 2011: :: Loading Keyboard Map: it ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:32 2011: :: Saving dmesg Log ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:32 2011: INIT: Entering runlevel: 5
    Fri Aug 5 15:40:32 2011: :: Starting Syslog-NG ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:32 2011: :: Starting D-BUS system messagebus ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:33 2011: :: Starting Avahi mDNS/DNS-SD Daemon ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:33 2011: :: Starting NetworkManager ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:33 2011: :: Mounting Network Filesystems ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:34 2011: :: Starting crond daemon ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:34 2011: :: Restoring ALSA Levels ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:34 2011: Starting VMware services:
    Fri Aug 5 15:40:34 2011: VMware USB Arbitrator^[[71G done
    Fri Aug 5 15:40:34 2011: Virtual machine monitor^[[71G done
    Fri Aug 5 15:40:35 2011: Virtual machine communication interface^[[71G done
    Fri Aug 5 15:40:35 2011: VM communication interface socket family^[[71G done
    Fri Aug 5 15:40:35 2011: Blocking file system^[[71G done
    Fri Aug 5 15:40:35 2011: Virtual ethernet^[[71G done
    Fri Aug 5 15:40:36 2011: Shared Memory Available^[[71G done
    Fri Aug 5 15:40:36 2011: :: Starting Up Sensors ^[[161G [BUSY] ^[[161G [DONE]
    What could be the problem?
    Thanks

    Wed Aug 10 08:49:11 2011: :: Adjusting system time and setting kernel timezone ^[[119G [BUSY] ^[[119G [DONE]
    Wed Aug 10 08:49:11 2011: :: Starting UDev Daemon ^[[119G [BUSY] ^[[119G [DONE]
    Wed Aug 10 08:49:11 2011: :: Triggering UDev uevents ^[[119G [BUSY] ^[[119G [DONE]
    Wed Aug 10 08:49:11 2011: :: Loading Modules ^[[119G [BUSY] ^[[119G [DONE]
    Wed Aug 10 08:49:11 2011: :: Waiting for UDev uevents to be processed ^[[119G [BUSY] ^[[119G [DONE]
    Wed Aug 10 08:49:11 2011: :: Bringing up loopback interface ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Checking Filesystems ^[[161G [BUSY] /dev/sda3: clean, 190755/480496 files, 1567027/1921775 blocks
    Wed Aug 10 08:49:11 2011: /dev/sda4: clean, 39914/14761984 files, 39001242/59034858 blocks
    Wed Aug 10 08:49:11 2011: /dev/sda1: clean, 29/26104 files, 19024/104388 blocks
    Wed Aug 10 08:49:11 2011: ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Remounting Root Read/Write ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Creating mtab ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Mounting Local Filesystems ^[[161G [BUSY] ^[[161G [FAIL]
    Wed Aug 10 08:49:11 2011: :: Activating Swap ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Configuring Time Zone ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Initializing Random Seed ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Removing Leftover Files ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:12 2011: :: Setting Hostname: gianluca-laptop ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:12 2011: :: Setting Locale: en_GB.UTF-8 ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:12 2011: :: Setting Consoles to UTF-8 mode ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:12 2011: :: Loading Keyboard Map: it ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:12 2011: :: Saving dmesg Log ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:12 2011: INIT: Entering runlevel: 5
    Wed Aug 10 08:49:12 2011: :: Starting Syslog-NG ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:13 2011: :: Starting D-BUS system messagebus ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:13 2011: :: Starting Avahi mDNS/DNS-SD Daemon ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:14 2011: :: Starting NetworkManager ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:14 2011: :: Mounting Network Filesystems ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:14 2011: :: Starting crond daemon ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:14 2011: :: Restoring ALSA Levels ^[[161G [BUSY] Found hardware: "HDA-Intel" "Intel Cantiga HDMI" "HDA:10ec0269,1025029b,00100004 HDA:80862802,80860101,001000
    Wed Aug 10 08:49:14 2011: Hardware is initialized using a generic method
    Wed Aug 10 08:49:14 2011: ^[[161G [FAIL]
    Wed Aug 10 08:49:15 2011: Starting VMware services:
    Wed Aug 10 08:49:15 2011: VMware USB Arbitrator^[[71G done
    Wed Aug 10 08:49:15 2011: Virtual machine monitor^[[71Gfailed
    Wed Aug 10 08:49:15 2011: Virtual machine communication interface^[[71Gfailed
    Wed Aug 10 08:49:15 2011: VM communication interface socket family^[[71Gfailed
    Wed Aug 10 08:49:15 2011: Blocking file system^[[71Gfailed
    Wed Aug 10 08:49:15 2011: Virtual ethernet^[[71Gfailed
    Wed Aug 10 08:49:15 2011: :: Starting Up Sensors ^[[161G [BUSY] ^[[161G [DONE]
    Ok, I still have that fail during the 'Mounting Local Filesystems'.
    If there isn't the swap partition it should be something else from my fstab..
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    devpts /dev/pts devpts defaults 0 0
    shm /dev/shm tmpfs nodev,nosuid 0 0
    UUID=1b52b0c4-5b56-4bee-8966-65bcaffbf2ee /home ext4 defaults 0 1
    UUID=22475d68-29e5-4a22-8942-38cb30110d30 swap swap defaults 0 0
    UUID=2bef0cce-027d-44fa-a086-056c390cd847 / ext4 defaults 0 1
    UUID=59d811ed-2920-45c1-a5cc-e0675e212721 /boot ext2 defaults 0 1
    UUID=325220A852207331 /media/MyPassport ntfs defaults,nofail 0 2
    UUID=FDC0-6FEA /media/CowonIvana auto defaults,nofail 0 2
    UUID=7AEB-F44F /media/CentralEurope auto defaults,nofail 0 2
    UUID=287B-C290 /media/CowonGian auto defaults,nofail 0 2
    UUID=3F9D788B3774630C /media/SanDisk ntfs defaults,nofail 0 2
    But I can't find anything that looks unusual into my /etc/fstab

  • EAP-TLS or PEAP authentication failed during SSL handshake to the ACS serve

    We are running the LWAPP (2006 wlc's and 1242 AP's) and using the ACS 4.0 for authentication. Our users are
    experiencing an issue, where they are successfully authenticated the first time, however as the number of them is increasing, they're starting to drop the connections and being prompted to re-authenticate. At this point, they are not being able to authenticate again.
    We're using PEAP for the authentication and Win XP SP2 clients as the supplicants. The error message that we are seeing on the ACS for that controller is "EAP-TLS or PEAP authentication failed during SSL handshake to the ACS server"...Not sure if this error msg is relevant since we have other WLC's that are working OK and still generating the same error msg on the ACS...
    Thanks..

    Here are some configs you can try:
    config advanced eap identity-request-timeout 120
    config advanced eap identity-request-retries 20
    config advanced eap request-timeout 120
    config advanced eap request-retries 20
    save config

  • Shared Services Registry and common settings (foundation)

    Hi Experts,
    I am trying to open shared serices regisry but surprisngly it is not available under start>programes>Foundation services>epmsystem (only digonostics is showing).
    Q1) Does we need to enable it from somewhere?
    Q2) if i make some changes under foundation> common settings> (mail conf) etc using config utility; does it require to make changes at all servers in distributed environment.
    Version 11.1.2
    Regards
    Kumar

    Q1 - I am not sure what you are looking for, the shared services registry is accessible through Shared Services web or http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_11121/apgs02s01.html
    Q2 - Probably worth restarting foundation if you make changes even though it should pick them up as they are just stored in the relational databse.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Server failed during initialization ...(authentification for user denied)

    hi,
    I'm using weblogic 7.0 server to replace my weblogic 5.0. I've got an error during
    login to the server:
    <server failed during initialization Exception: java.lang.securityException: Authentification
    for user denied..>
    could you help me and tell me what to do ?
    Thanks you.
    Cyril

    cyril,
    You should use the same username and password that you used to boot your 5.1 server with.
    hope it helps,
    -satya
    cyril wrote:
    In fact, I used the properties converter through the console to convert weblogic.properties
    to config.xml and the variables:
    WLS_USER=weblogic.
    WLS_PWD=weblogic.
    The petstoreExamples works but not my application...
    satya <[email protected]> wrote:
    Cyril,
    Did you use the properties converter through the console to convert your
    weblogic.properties to
    config.xml? What username and password did you use to boot the server?
    Thanks,
    -satya
    cyril wrote:
    hi,
    I'm using weblogic 7.0 server to replace my weblogic 5.0. I've gotan error during
    login to the server:
    <server failed during initialization Exception: java.lang.securityException:Authentification
    for user denied..>
    could you help me and tell me what to do ?
    Thanks you.
    Cyril

  • Managed server failed during start

    I am trying to start my Managed instance ( located on a box different from Admin) but I do not know why its getting failed.
    However one more instance running fine which exists on the same box and using the same node manager.
    Below is the errors I am seeing in the server.log file;
    #<Feb 8, 2010 11:09:36 AM CST> <Critical> <WebLogicServer> <xltwls02> <CargomaxMDB2> <Main Thread> <<WLS Kernel>> <> <> <1265648976581> <BEA-000386> <Server subsystem failed.
    Reason: java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_922_WLStub
    java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_922_WLStub
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRootNamingNodeStub(WLInitialContextFactoryDelegate.java:595)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRemoteContext(WLInitialContextFactoryDelegate.java:567)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:475)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:373)
    at weblogic.jndi.Environment.getContext(Environment.java:307)
    at weblogic.jndi.Environment.getContext(Environment.java:277)
    at weblogic.jndi.Environment.createInitialContext(Environment.java:200)
    at weblogic.jndi.Environment.getInitialContext(Environment.java:184)
    at weblogic.jndi.Environment.getInitialContext(Environment.java:162)
    at weblogic.management.mbeanservers.compatibility.internal.CompatibilityMBeanServerService.start(CompatibilityMBeanServerService.java:154)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_922_WLStub
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:164)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRootNamingNodeStub(WLInitialContextFactoryDelegate.java:591)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRemoteContext(WLInitialContextFactoryDelegate.java:567)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:475)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:373)
    at weblogic.jndi.Environment.getContext(Environment.java:307)
    at weblogic.jndi.Environment.getContext(Environment.java:277)
    at weblogic.jndi.Environment.createInitialContext(Environment.java:200)
    at weblogic.jndi.Environment.getInitialContext(Environment.java:184)
    at weblogic.jndi.Environment.getInitialContext(Environment.java:162)
    at weblogic.management.mbeanservers.compatibility.internal.CompatibilityMBeanServerService.start(CompatibilityMBeanServerService.java:154)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    I am also pasting below the error I am seeing in Server.out file
    <Feb 8, 2010 11:09:31 AM CST> <Notice> <Log Management> <BEA-170019> <The server log file /opt/WeblogicLogs/cargomax/Dev/CargomaxMDB2/logs/CargomaxMDB2.log is opened. All server
    side log events will be written to this file.>
    <Feb 8, 2010 11:09:35 AM CST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Feb 8, 2010 11:09:36 AM CST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jnd
    i.internal.ServerNamingNode_922_WLStub
    java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_922_WLStub
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRootNamingNodeStub(WLInitialContextFactoryDelegate.java:595)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRemoteContext(WLInitialContextFactoryDelegate.java:567)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:475)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:373)
    at weblogic.jndi.Environment.getContext(Environment.java:307)
    Truncated. see log file for complete stacktrace
    java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_922_WLStub
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:164)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRootNamingNodeStub(WLInitialContextFactoryDelegate.java:591)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRemoteContext(WLInitialContextFactoryDelegate.java:567)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:475)
    Truncated. see log file for complete stacktrace
    >
    The WebLogic Server encountered a critical failure
    Reason: Failed to load stub for class class weblogic.server.RemoteLifeCycleOperationsImpl
    Exception in thread "Main Thread" java.lang.AssertionError: Failed to load stub for class class weblogic.server.RemoteLifeCycleOperationsImpl
    at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:147)
    at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:126)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialReference(WLInitialContextFactoryDelegate.java:424)
    at weblogic.jndi.Environment.getInitialReference(Environment.java:237)
    at weblogic.server.ServerLifeCycleRuntime.getLifeCycleOperationsRemote(ServerLifeCycleRuntime.java:678)
    at weblogic.t3.srvr.ServerRuntime.sendStateToAdminServer(ServerRuntime.java:406)
    at weblogic.t3.srvr.ServerRuntime.updateRunState(ServerRuntime.java:392)
    at weblogic.t3.srvr.T3Srvr.setState(T3Srvr.java:172)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:373)
    at weblogic.Server.main(Server.java:67)
    <Feb 8, 2010 11:09:37 AM> <Info> <NodeManager> <Server failed during startup so will not be restarted>
    Thanks in Advance!

    Sorry I think I made a mistake while pasting complete classpath, the classpath we are using is
    <class-path>/opt/WeblogicApps/cargomax/cargomaxDomainDev/lib/CR326377_92mp2.jar:/opt/Weblogic/WLS9.2.2/patch_weblogic922/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/Weblogic/WLS9.2.2/jrockit90_150_10/lib/tools.jar:/opt/Weblogic/WLS9.2.2/server/lib/weblogic_sp.jar:/opt/WeblogicApps/cargomax/cargomaxDomainDev/lib/tibjms.jar:/opt/Weblogic/WLS9.2.2/server/lib/weblogic.jar:/opt/Weblogic/WLS9.2.2/server/lib/webservices.jar:/opt/Weblogic/WLS9.2.2/common/eval/pointbase/lib/pbclient51.jar:/opt/Weblogic/WLS9.2.2/server/lib/xqrl.jar:/opt/Weblogic/WLS9.2.2/platform/lib/p13n/p13n-schemas.jar:/opt/Weblogic/WLS9.2.2/platform/lib/p13n/p13n_common.jar:/opt/Weblogic/WLS9.2.2/platform/lib/p13n/p13n_system.jar:/opt/Weblogic/WLS9.2.2/platform/lib/wlp/netuix_common.jar:/opt/Weblogic/WLS9.2.2/platform/lib/wlp/netuix_schemas.jar:/opt/Weblogic/WLS9.2.2/platform/lib/wlp/netuix_system.jar:/opt/Weblogic/WLS9.2.2/platform/lib/wlp/wsrp-common.jar:/opt/WeblogicApps/cargomax/cargomaxDomainDev/lib/swalog4j-1.1.jar</class-path>
    I compared the classpath of the MS1 ( Running fine on Machine1, on the same box Admin is also running fine. ) and MS2. They are exactly same and we are passing the same start up argument.
    But when I am trying to start the MS2 through admin console its throwing the same error.
    The Server out log says:
    <Feb 10, 2010 3:17:29 PM CST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Feb 10, 2010 3:17:30 PM CST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jnd
    i.internal.ServerNamingNode_922_WLStub
    java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_922_WLStub
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRootNamingNodeStub(WLInitialContextFactoryDelegate.java:595)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRemoteContext(WLInitialContextFactoryDelegate.java:567)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:475)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:373)
    at weblogic.jndi.Environment.getContext(Environment.java:307)
    Truncated. see log file for complete stacktrace
    java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_922_WLStub
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:164)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRootNamingNodeStub(WLInitialContextFactoryDelegate.java:591)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRemoteContext(WLInitialContextFactoryDelegate.java:567)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:475)
    Truncated. see log file for complete stacktrace
    >
    The WebLogic Server encountered a critical failure
    Reason: Failed to load stub for class class weblogic.server.RemoteLifeCycleOperationsImpl
    Exception in thread "Main Thread" java.lang.AssertionError: Failed to load stub for class class weblogic.server.RemoteLifeCycleOperationsImpl
    at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:147)
    at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:126)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialReference(WLInitialContextFactoryDelegate.java:424)
    at weblogic.jndi.Environment.getInitialReference(Environment.java:237)
    at weblogic.server.ServerLifeCycleRuntime.getLifeCycleOperationsRemote(ServerLifeCycleRuntime.java:678)
    at weblogic.t3.srvr.ServerRuntime.sendStateToAdminServer(ServerRuntime.java:406)
    at weblogic.t3.srvr.ServerRuntime.updateRunState(ServerRuntime.java:392)
    at weblogic.t3.srvr.T3Srvr.setState(T3Srvr.java:172)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:373)
    at weblogic.Server.main(Server.java:67)
    <Feb 10, 2010 3:17:31 PM> <Info> <NodeManager> <Server failed during startup so will not be restarted>
    And the server log says:
    LS Kernel>> <> <> <1265836650371> <BEA-400000> <Initializing message interception service>
    ####<Feb 10, 2010 3:17:30 PM CST> <Critical> <WebLogicServer> <xltwls02> <CargomaxMDB2> <Main Thread> <<WLS Kernel>> <> <> <1265836650628> <BEA-000386> <Server subsystem failed.
    Reason: java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_922_WLStub
    java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_922_WLStub
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRootNamingNodeStub(WLInitialContextFactoryDelegate.java:595)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRemoteContext(WLInitialContextFactoryDelegate.java:567)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:475)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:373)
    at weblogic.jndi.Environment.getContext(Environment.java:307)
    at weblogic.jndi.Environment.getContext(Environment.java:277)
    at weblogic.jndi.Environment.createInitialContext(Environment.java:200)
    at weblogic.jndi.Environment.getInitialContext(Environment.java:184)
    at weblogic.jndi.Environment.getInitialContext(Environment.java:162)
    at weblogic.management.mbeanservers.compatibility.internal.CompatibilityMBeanServerService.start(CompatibilityMBeanServerService.java:154)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_922_WLStub
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:164)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRootNamingNodeStub(WLInitialContextFactoryDelegate.java:591)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRemoteContext(WLInitialContextFactoryDelegate.java:567)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:475)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:373)
    at weblogic.jndi.Environment.getContext(Environment.java:307)
    at weblogic.jndi.Environment.getContext(Environment.java:277)
    at weblogic.jndi.Environment.createInitialContext(Environment.java:200)
    at weblogic.jndi.Environment.getInitialContext(Environment.java:184)
    at weblogic.jndi.Environment.getInitialContext(Environment.java:162)
    at weblogic.management.mbeanservers.compatibility.internal.CompatibilityMBeanServerService.start(CompatibilityMBeanServerService.java:154)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    >
    Please advice me if you have any workaround or solution in your mind.

  • ALC-LCM-120-207 JMS settings failed validation

    during install, got error at the step "Application Server Configuration Validation" step:
    JMS settings failed validation
    Failed to validate queue connection factory QueueConnectionFactory
    any suggestions on how to get this fixed would be much appreciated.
    there was no error whatsoever before this step.
    the platform is: Windows 2003, WebSphere, SQL Server.
    thanks

    Jasmin, thanks for response.
    WAS version is:
    IBM WebSphere Application Server, 6.1.0.5
    Build Number: cf50652.12
    Build Date: 12/28/06
    java -version returns "1.5.0".
    not a cluster.
    As far as I know, LC ES has not been installed on it before.
    After I got the error, I checked the QueueConnectionFactory (using WebSphere console) by following the ES install guide's "Manual Configuring WebSphere" chapter. The only thing that didn't match on that screen was that nothing was set in the "XA recovery authentication alias" dropdown.
    What to do next?

  • "Web Cache Configuration Assistant" failed during installation

    Hi,
    I'm trying to install Grid Control on Fedora Core 4 but it failes during the installation at the "Web Cache Configuration Assistant".
    I already createt a loopback device on localhost.
    Thanks for any surggestions!!
    End output from spawned process.
    Configuration assistant "Web Cache Configuration Assistant" failed
    2
    ORACLE_HOME is /opt/oracle/EM/10.1.0.3
    Failed in smi manipulation().
    TaskMaster initialization failed.
    Root Cause: Subscription request timed out after 120000 millseconds. Possible causes: OPMN may not be running, you may have an OPMN running in an alternate ORACLE_HOME using duplicate port values, or OPMN may be misconfigured.
    oracle.ons.SubscriptionException: Subscription request timed out after 120000 millseconds. Possible causes: OPMN may not be running, you may have an OPMN running in an alternate ORACLE_HOME using duplicate port values, or OPMN may be misconfigured.
    at oracle at oracle.ons.ONS.addSubscriber(ONS.java:333)
    at oracle.ons.Subscriber.realStartup(Subscriber.java:92)
    at oracle.ons.Subscriber.<init>(Subscriber.java:80)
    at oracle.ons.ONS.createNewSubscriber(ONS.java:687)
    at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
    at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
    at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
    at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
    at oracle.ias.sysmgmt.EntryPoint.init(Unknown Source)
    at oracle.ias.webcache.config.WebcacheConfig.smiSetup(WebcacheConfig.java:243)
    at oracle.ias.webcache.config.WebcacheConfig.smiEnableWebcache(WebcacheConfig.java:215)
    at oracle.ias.webcache.config.WebcacheConfig.enableConfiguration(WebcacheConfig.java:191)
    at oracle.ias.webcache.config.WebcacheConfig.main(WebcacheConfig.java:66)
    .ons.SubscriptionNotification.waitForReply(SubscriptionNotification.java:82)
    cat /etc/hosts:
    127.0.0.1 loopback localhost
    127.0.0.1 fedora01 fedora01.barmenia.de localhost.localdomain localhost
    172.xxx.xxx.xxx fedora01.barmenia.de fedora01 oracleinstall

    hi,
    i tried to reinstall but it is still the same problem.
    before i started the installer there was no oracle process left
    fedora01.oracle[emrep]>ps -x
    Warning: bad syntax, perhaps a bogus '-'? See /usr/share/doc/procps-3.2.5/FAQ
    PID TTY STAT TIME COMMAND
    2976 pts/2 S 0:00 -ksh
    17573 pts/2 R+ 0:00 ps -x
    fedora01.oracle[emrep]>.1.0.3/Disk1/runInstaller PRE_REQUISITE=TRUE <
    Starting Oracle Universal Installer...
    before the assistant fails it looked like:
    Warning: bad syntax, perhaps a bogus '-'? See /usr/share/doc/procps-3.2.5/FAQ
    PID TTY STAT TIME COMMAND
    2976 pts/2 S+ 0:00 -ksh
    17588 pts/2 S 2:32 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
    17589 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
    17590 pts/2 S 0:26 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
    17591 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
    17592 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
    17593 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
    17594 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
    17595 pts/2 S 0:02 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
    17596 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
    17597 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
    17598 pts/2 S 0:02 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
    17600 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
    17601 pts/2 S 0:07 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
    17607 pts/2 S 0:02 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
    17677 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
    26185 ? Ss 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
    26301 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
    26381 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
    26409 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/bin/tnslsnr LISTENER -inherit
    26669 pts/4 S 0:00 -ksh
    26717 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
    26718 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
    26719 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
    26720 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
    26721 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
    26722 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
    26723 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
    26724 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
    26725 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
    26726 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
    26727 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
    26728 26729 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
    26730 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
    26731 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
    26732 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
    26770 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
    26771 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
    26772 pts/2 S 0:01 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
    26773 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
    26774 pts/2 S 0:00 /tmp/OraInstall2005-09-27_02-31-00PM/jre/1.4.2/bin/java -Doracle.installer.librar
    26775 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
    26776 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
    26777 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
    26778 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
    26779 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
    26780 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
    26781 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
    26782 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
    26783 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
    26791 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
    26792 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
    26834 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/jdk/bin/java -DORACLE_HOME=/opt/oracle/EM/10.1.0.3 -class
    26835 pts/2 S 0:00 /bin/sh /opt/oracle/EM/10.1.0.3/opmn/bin/opmnctl stopall
    26843 pts/2 S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -a -q shutdown
    26844 ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
    ? S 0:00 /opt/oracle/EM/10.1.0.3/opmn/bin/opmn -d
    I'm running out of ideas!!
    thanks for your help!!!
    daniel

  • ""selected font failed during last operation." and " there is a problem with generator" application error

    For PSDs I have created in older versions of Photoshop CC 2014 I am getting errors when opening / trying to save. They seem to be either Generator or font related. Interestingly, PSDs created in newer versions of PS CC 2014 have no issues, even when using same fonts.
    I am getting the error messages:
    When I open the older PSD files, (again created or saved in older versions of PS CC 2014) I am asked to update fonts. If I do I get the error.
    'Selected font failed during last operation'
    When I try to don't try to update fonts and then I try to play with the file I get the following error.
    'There is a problem with Generator. Please quit Photoshop and try again. If the problem persists, remove any third-party plugins or try re-installing photoshop.
    I don't have any third party plugins that I can see.
    I have re-installed multiple times.
    I need to use this program and I am paying for your services. I am actually on the phone now with 'help desk' and have been on hold for 22 minutes.
    Please Help

    When I installed the Apple programs, mobile device application did not uninstall by itself. I had to go to c://program files/common files/apple/mobile device application (or something like that) and manually delete the contents and the folders. I have a 64 bit version so I also had to visit c://program files (x86)/common files/apple/mobile application device (or similar) and also manually delete the files and folders. I had to delete the files before I could delete the folders. This manual part is probably tripping everyone up, because it's not as easy as simply hitting uninstall in the control panel. But the instructions are there. I hope this helps you.

  • A Windows Workflow Foundation workflow failed during execution

    Needed to know if there was some way to identify what the workflow was that is causing this error? I see this: "Workflow Identifier: 0cb64340-3a44-009e-67af-70963215b839" just not sure what SMLet I can use to see what this corresponds too.
    Log Name:      Operations Manager
    Source:        Health Service Modules
    Date:          1/2/2013 1:56:56 PM
    Event ID:      33880
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      scsm
    Description:
    A Windows Workflow Foundation workflow failed during execution.
    Workflow Type: Microsoft.EnterpriseManagement.WorkflowFoundation.ConfigurationWorkflow
    Workflow Identifier: 0cb64340-3a44-009e-67af-70963215b839
    Exception Type: Microsoft.EnterpriseManagement.Common.ObjectNotFoundException
    Exception Message: An object of class ManagementPackRelationship with ID 6ec982d4-207f-da19-3bc9-e6d2ff7b067e was not found.
    Exception Stack:    at Microsoft.EnterpriseManagement.Configuration.TypeSpaceCache.Get[T](Guid id)
       at Microsoft.EnterpriseManagement.EntityTypeManagement.GetRelationshipClass(Guid id)
       at Microsoft.EnterpriseManagement.WorkflowFoundation.ConfigurationWorkflow.prepareNotificationActivity_ExecuteCode(Object sender, EventArgs e)
       at System.Workflow.ComponentModel.Activity.RaiseEvent(DependencyProperty dependencyEvent, Object sender, EventArgs e)
       at System.Workflow.Activities.CodeActivity.Execute(ActivityExecutionContext executionContext)
       at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity, ActivityExecutionContext executionContext)
       at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(Activity activity, ActivityExecutionContext executionContext)
       at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
       at System.Workflow.Runtime.Scheduler.Run()
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Health Service Modules" />
        <EventID Qualifiers="49152">33880</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-01-02T19:56:56.000000000Z" />
        <EventRecordID>1098867</EventRecordID>
        <Channel>Operations Manager</Channel>
        <Computer>scsm</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Microsoft.EnterpriseManagement.WorkflowFoundation.ConfigurationWorkflow</Data>
        <Data>0cb64340-3a44-009e-67af-70963215b839</Data>
        <Data>Microsoft.EnterpriseManagement.Common.ObjectNotFoundException</Data>
        <Data>An object of class ManagementPackRelationship with ID 6ec982d4-207f-da19-3bc9-e6d2ff7b067e was not found.</Data>
        <Data>   at Microsoft.EnterpriseManagement.Configuration.TypeSpaceCache.Get[T](Guid id)
       at Microsoft.EnterpriseManagement.EntityTypeManagement.GetRelationshipClass(Guid id)
       at Microsoft.EnterpriseManagement.WorkflowFoundation.ConfigurationWorkflow.prepareNotificationActivity_ExecuteCode(Object sender, EventArgs e)
       at System.Workflow.ComponentModel.Activity.RaiseEvent(DependencyProperty dependencyEvent, Object sender, EventArgs e)
       at System.Workflow.Activities.CodeActivity.Execute(ActivityExecutionContext executionContext)
       at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity, ActivityExecutionContext executionContext)
       at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(Activity activity, ActivityExecutionContext executionContext)
       at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
       at System.Workflow.Runtime.Scheduler.Run()</Data>
      </EventData>
    </Event>
    Help

    Everytime I run it I get nothing.
    Tried using the workflow identifier: 0cb64340-3a44-009e-67af-70963215b839 and tried this number as well: 6ec982d4-207f-da19-3bc9-e6d2ff7b067e
    Both just take me to the prompt with no info.
    EVENT ID 33880 Health Service Modules is the event title.
    Help

  • What is "Override Common Settings"?

    Certain configuration settings exist at the Phone, Common Phone Profile, and the Enterprise Phone Configuration
    If you set a parameter at any of the following above mentioned levels - the setting that takes precedence is determined in the following order:
    1) Device Configuration window settings, 2) Common Phone Profile window settings, 3) Enterprise Phone Configuration window settings.
    For example - in the following example - Web Access would be DISABLED.
    Enterprise Phone Configuration
    Web Access = Enabled
    Override Common Settings = Unchecked
    Phone Device Configuration
    Web Access = Disabled
    Override Common Settings = Unchecked
    What if this was the scenario:
    Enterprise Phone Configuration
    Web Access = Enabled
    Override Common Settings = Checked
    Phone Device Configuration
    Web Access = Disabled
    Override Common Settings = Checked
    Would the NORMAL order once again apply (Phone - Common Phone Profile - Enterprise) and thus the PHONE setting OVERRIDES the other "Common" setting at the Enterprise level and web access would be DISABLED?
    TIA,
    Amir

    Hi Amir,
    Hope all is well my friend :)
    Yes, in your second example the web access would be disabled as the normal order does apply when making changes at the product-specific configuration level . The key to the override config is this part of the statement below;
    Override Common Settings Check Box
    When you set the parameters, check the Override Common Settings check box for each setting that you wish to update. If you do not check this box, the corresponding parameter setting does not take effect. If you set the parameters in the three configuration windows, the setting takes precedence in the following order:
    Phone Configuration window
    Common Phone Profile window
    Enterprise Phone Configuration window
    From;
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/9971_9951_8961/9_0_1/english/admin_guide/P567_BK_A3A732A5_00_admin-guide-8961_9951_9971-9_0/P567_BK_A3A732A5_00_admin-guide-8961_9951_9971-9_0_chapter_01000.html#P567_TP_OF67818E_00
    Cheers!
    Rob 

  • URGENT! Critical WebLogicServer 000364 Server failed during initialization

    Hello,
    My weblogic server was running fine but when I tried to restart it is givin me
    the following error.
    I am not able to figure it out.I have not done any changes to any of files.
    Failed to find host: java.net.UnknownHostException: -i
    <Aug 5, 2003 3:16:24 PM CDT> <Critical> <WebLogicServer> <000364> <Server failed
    during initialization. Exception:java.l
    ang.NullPointerException
    java.lang.NullPointerException
    at com.bea.utils.misc.Process.isValidIP(Process.java:670)
    at com.bea.utils.misc.ProcessManager.otherItemCheck(ProcessManager.java:724)
    at com.bea.utils.misc.ProcessManager.otherItemCheck_wrapper(ProcessManager.java:704)
    at com.bea.utils.misc.ProcessManager.memCheck(ProcessManager.java:659)
    at weblogic.t3.srvr.T3Srvr.checkAccess(T3Srvr.java:414)
    at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:622)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
    at weblogic.Server.main(Server.java:32)
    >
    Thanks
    sandhya

    I got it it was IP address confusion.
    Thanks
    sandhya
    "Karthik V" <[email protected]> wrote:
    Check the <Server> configuration in your config.xml.
    If you have specified the "ListenAddress" attribute, remove it and try
    starting your server.
    /k
    "sandhya" <[email protected]> wrote in message
    news:[email protected]..
    Hello,
    My weblogic server was running fine but when I tried to restart itis
    givin me
    the following error.
    I am not able to figure it out.I have not done any changes to any offiles.
    Failed to find host: java.net.UnknownHostException: -i
    <Aug 5, 2003 3:16:24 PM CDT> <Critical> <WebLogicServer> <000364> <Serverfailed
    during initialization. Exception:java.l
    ang.NullPointerException
    java.lang.NullPointerException
    at com.bea.utils.misc.Process.isValidIP(Process.java:670)
    atcom.bea.utils.misc.ProcessManager.otherItemCheck(ProcessManager.java:724)
    atcom.bea.utils.misc.ProcessManager.otherItemCheck_wrapper(ProcessManager.java
    :704)
    atcom.bea.utils.misc.ProcessManager.memCheck(ProcessManager.java:659)
    at weblogic.t3.srvr.T3Srvr.checkAccess(T3Srvr.java:414)
    at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:622)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
    at weblogic.Server.main(Server.java:32)
    >
    Thanks
    sandhya

  • Photoshop CC Sync Settings failed

    When I try and sync my application settings, I always get an error message saying 'sync settings failed - can't connect to creative cloud'. However, I am signed in to the creative cloud application manager (sitting in my task bar, saying I am signed in) and there is nothing wrong with my internet connection. Why can't my photoshop sync my settings?

    Having the exact same issue, for months now (originally, I had (almost) no problem syncing settings.)
    I'm on a 2010-2011 27" iMac running OS X Mavericks, never had a single software/network issue with this machine since the day I bought it.  I typically run 2 to 4 Adobe apps simultaneously, in addition to Chrome, Spotify, Mail, and a couple of other apps/utilities sporadically with no performance delays (aside from memory cache needing to be cleared occasionally).
    I'm connected to Creative Cloud via the app and signed-in via browser.  In the CC app I can see that all my apps are up to date, I can access my files, I can see the synced fonts, etc (however I cannot connect to Behance).
    Error messages I encounter:
    Photoshop CC: Sync settings failed. Cannot connect to Creative Cloud.
    Dreamweaver CC: Sync settings failed. Last Sync: 1/24/14 10:20 AM (not sure how that even connected or why during that time on that day.)
    Illustrator CC: Cannot even click the Sync button, it's greyed out.  If I click the Share on Behance button I get a pop-up that says, "Sorry, there was an error with your request. Please close this window and try again. Still Having Trouble? Contact Behance Help and reference error: Error fetching access token." If I go to that Behance Help page, there is no help on this topic, nor is there a search or anything to input this "Error fetching access token" reference error.
    Indesign CC: Does not allow me to click the Sync button, I get a "bad-circle" like Ø icon.
    TypeKit: Not an error message, but this feature is so unbelievably unreliable and inconsistent I dare even call it a "feature."  Newly added fonts don't show up for days.  Always need to restart Apps before they will show up.  Sometimes fonts will just disappear.  I love the IDEA of this but I'm so disappointed in the execution...are we PAYING to be beta testers?!
    Not being able to sync my settings in the CC isn't the end of the world, but I still want to be able to do it, and I spend what? $50 a month on this, and this is like a CORE feature of the product.
    I would sincerely appreciate any help at all fixing this CC syncing issue, I have no idea what to do next.

Maybe you are looking for