Communcation channel - Adapter engine field is empty.

Hello Gurus,
      After pointing XI to a seperate SLD, the Adapter engine field (the pull down) in the "Communication channel" is empy. The  adatpers are visible and no problem there. The business systems apprears to be O.k in the new SLD. We perfomed a export of technical and Business systems from old SLD and new SLD.
Help will be awarded with points.
-N.S

Hi,
Refer this blog:
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
Regards
Suraj

Similar Messages

  • Adapter Engine field is empty

    Hi all,
    1.  When creating Communication Channel in ID , "Integration Engine"  field coming as  empty when file adapter is selected.  It is shwoing error msg when saving the CC. Why it is coming as empty? and how to resolve it?
    2.  When selecting the IDOC adapter in Communication Channel only  "Receiver" option is enabled and "Sender" option is disabled. What to do for "Sender" option also to be enabled?
    regards,
    Khaja.

    Hi,
    Check if post installation is done properly.
    Link for posnt installation guide
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
    https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
    Also check in SXMB_ADM and check for Integration Server configuration is fine.
    Thanks,
    Prakash

  • Adapter Engine field is blank while creating RFC recieving Comm Channel

    Dear XI gurus
    I have just installed XI server and also did the configuration and everything seems to work fine. I did SLD configuration, mapping etc.,
    Then went to Configuration module and am trying to create a sender communication channel (Adapter Type RFC).
    The Transport Protocol and Message Protocol fields got automatically filled by 'RFC' and 'RFC (RFC XML)' respectively.
    However Adapter Engine field is showing up blank and when I try to select from the drop down menu, it is also blank.
    I did search for other postings and tried the following as per the suggestions
    Went visual administrator (by clicking on go.bat) and made sure that the cluster->Service and all the services needed for SAP XI Adapters are up and running
    I would appreciate if you have any other feedback on this problem.
    Thanks
    Ram

    Thanks a lot for your response, I will try that again and will let you know.
    Meanwhile I also followed tech note 1031321 which said the following.
    2. To register the Adapter Engine, you have to restart the following applications:
    sap.com/com.sap.aii.af.app
    sap.com/com.sap.aii.af.cpa.app,
    But this didn't help. I will try your suggestion

  • Adapter engine field blank in File Comm channel (Sender)

    Hi,
    I am not getting any value in drop-down list of adapter engine in file adapter communication channel.System is allowing me to save the comm channel but when I am trying to create sender agreement, system is giving me following error
    <b>Unable to find an associated SLD element (source element: SAP_XIIntegrationDirectory, [CreationClassName, SAP_XIIntegrationDirectory, string, Name, directory.s01., string], target element type: SAP_XIIntegrationServer)</b>
    I m getting values of adapter engine when I select some other adpter like IDOC or RFC.
    Please help...

    Hi,
    1) Can you check your Post Installation.
    2) Look for SAP NOTES.
    3) Try cache refresh
       a)Start transaction SXI_CACHE.
       b)From the context menu XI Runtime Cache select Start Complete Cache Refresh.
    If you still face issue try this .
    Many actions require to access System Landscape Directory content from the Integration Builder. To optimize performance, this content is loaded into a cache so that the System Landscape Directory does not have to be accessed directly each time that System Landscape Directory content is required.
    However, this cache is not automatically updated if changes are made to the content of the System Landscape Directory. For this reason that we delete the System Landscape Directory cache if changes have been made to content in the System Landscape Directory. The cache is then filled each time that the System Landscape Directory is accessed. If we log on to the Integration Builder after we have made a change in the SLD, we do not need to delete the SLD cache.
    To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
    Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
    Regards
    Agasthuri Doss

  • Adapter engine field blank in RFC Comm channel (Sender)

    Hi Friends,
    I am not getting any value in drop-down list of adapter engine in RFC adapter sender communication channel.System is allowing me to save the comm channel , system is giving me following error
    No adapter engine specified
    I m getting values of adapter engine when I select some other adpter like XI.
    Thanx
    Anand

    Hi,
    The RfcAdapter is implemented as a J2EE Service and thus this service has to be started and stopped. This will affect the whole RfcAdapter and can be done from the J2EE Engines Visual Administrator. When you are connected to the J2EE Engine choose the tab 'Cluster' and open the appropriate server node in the tree. Then open the 'Services' node. There you can see the entry 'SAP XI Adapter: RFC'. When you open the context menu on this entry you can start and stop the service
    Regards
    Chilla...

  • RFC Adapter: Adapter Engine Field Blank

    Hi all,
    Could anyone guide me through troubleshooting this one: When creating a RFC communication channel the listbox for the Adapter Engine is empty so I cannot select Integration Server as in other channels. All I know is that this might come from a messed-up SLD.
    What do I need to look for? Any help is really appreciated.
    Eugen.

    Hilbert,
    Thanks a lot for your answer. It kept me looking for more OSS notes and #764176 actually solved this problem.
    Eugen.

  • Communication channel Adapter Engine

    Hi
    I'm having problems identifying if a communication channel is working.
    I've created a JDBC communication channel but was unable to select the adapter engine from the drop down list as the list was blank.
    In the Runtime workbench  channel monitoring, the channel is not listed
    So 2 questions
    where is the config so that the adapter engine can be selected for the communication channel
    and what is the procedure to activate the communication channel so that it can be seen in channel monitoring
    all help gratefully received
    Geoff

    Hi,
    You can monitoring your communication channel via :
    http://<hostname>:5<sysnum>00/mdt/channelmonitorservlet
    In this monitoring, you can see if he is functional. You can start / stop manually this communication channel too.
    If you want see if the communication channel is actived, you can go to Integration Builder -> You open your communication channel and in Advanced Tab : you can see if he is actived or not.
    Best Regards

  • RFC Adapter Problem: Adapter Engine Field Blank

    Hi,
    I want to invoke a BAPI defined on a R/3 system. I am trying to create a RFC Adapter in the Integration Directory by creating a communication channel.
    The problem I am facing is that when I define the Adapter Type as RFC, the Adapter Engine dropdown list is blank and it does not contain any entries.
    On passing a document through XI, I can see the following error in the monitor:
    <SAP:Code area="INTERNAL">ADAPTER_NAME_INVALID</SAP:Code>
      <SAP:P1>RFC</SAP:P1>
      <SAP:P2>PLSRV_CALL_ADAPTER</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Unknown receiver adapter (name = RFC)</SAP:Stack>
    what do i need to configure on the XI and R/3 side ?
    thanks,
    Manish

    i followed the steps but i am not getting the populated adapter engine list.
    Actually, the Association shows a list of logical systems to be added (Application System, BC Application Server, BC Central Server Instance .....). I experimented with many systems but it is not working.
    My basic problem is I need to call a BAPI from XI. The XI monitor shows the error :
    Adapter Name Invalid.
    Unknown Receiver Adapter (name=RFC).
    Now, for the RFC adapter, I have not given it any name. My Communication Channel is called GeneratedChannelRFC.  I am not sure where this error is coming from. I would appreciate any help to solve this error.
    thanks,
    Manish

  • Adapter Engine Field missing --

    Hi All,
    I'm trying to create new Communication Channel in our QA system.
    I'm using 'Sender File Adapter'  But somehow When I choose below option, the last value (Adapter Engine) is blank.
    - Adapter type : Sender FILE   http://sap.com/xi/XI/System  SAP BASIS 7.00
    - Transport Protocal : File System (NFS).
    - Message Protocal : File
    - Adapter Engine : ???????  (Blank)..
    We are under PI 7.0 and I did same in Dev but it's not in QA.  I think the value of 'Adapter Engine ' should be 'Integration Server'
    automatically.   Any Idea?
    Thanks in advance.

    Hi,
    Yes, if your adapter reside in the central adapter engine then it should be in the IS.
    Adapters that host in different adapter engine, then decental adapter engine need to be selected.
    Check you SLD configuration, whether there is an entry for your Adapter Engine or  not.
    Have a Look on this SAP Note : 764176, do hope it will resolve you problem.
    Look for these discussion: Unable to determine name of central adapter engine
    Missing Adapter Engine in the XI Domain (in the RTWB view)
    Thanks
    Farooq.
    Edited by: Farooq Farooqui on Jul 31, 2008 7:19 AM
    Edited by: Farooq Farooqui on Jul 31, 2008 7:29 AM

  • File adapter, no item in Adapter Engine list

    I'm trying add communication channel (File/FTP Receiver)
    There is no item In Adapter Engine list . This fieldis mandatory.
    What must I do to see "Integration Server" in this list?
    Thanks.

    Hi Cemil,
    See these..
    Adapter Engine field is empty
    Integration Server does not appear in Adapter Engine field for File adapter
    cheers,
    Prashanth
    P.S Please mark helpful answers

  • No Adapter Engine value  in File Adapter Config

    Hello,
    When we configured File adapter in Integration Directory  we noticed that ADAPTER ENGINE pull down is empty.
    I cannot assign any value to Adapter Engine field.
    It is a new  test system and should all be configured already. I wonder if this is ok or not. My experience was that I should be able to see Adapter Engine there??
    Moreover Adapter Engine field has a red star which means is mandatory field but I am not sure...?!
    I will appreciate any directions from experienced or  xi basis people.
    Thanks

    Follow the steps given in this BLOG for adapter enginer coming in ID -
    Adapter Engine cannot be found in Integration Directory
    Gud Luck !!

  • Adapter Engine missing in SLD and RWB

    Hi all,
    I have no Adapter Engine in RWB or under technical systems in the SLD.
    In Integration Directory I have "central adapter engine" in the adapter engine field in my File adapter .
    But I get this message when I open the communication Channel:
    "No SLD elements of type SAP_XIAdapterFramework found"
    Please advice,
    Thanks!

    Hi Thomas,
    Your Adapter Framework is probably not registered in the SLD. You may force the
    registration if you perform the action as follows:
    1. In the J2EE administrator tool in cluster - server - services - deploy
    (application view), stop the J2EE applications:
    a. sap.com/com.sap.aii.af.service.cpa.monitor
    b. sap.com/com.sap.aii.af.
    2. Restart the sap.com/com.sap.aii.af application.
    Refer sapnote in chapter 8.2 for more in the link provided below on Trouble shooting.
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
    Cheers,
    Ram.

  • No values in the dropdown for Adapter Engine

    Hello Colleague,
    While configuring a sender adapter engine in the integration directory, there are no value displayed when we select an Adapter and do a dropdown on the "Adapter Engine" Field.
    Could you pls. help.
    Regards,
    Gajendra.

    Hi Gajendra,
    Have you imported the SAP_BASIS content into yor repository?? If not do that.
    Also you can go through the below thread
    <i>No Adpater Engine available in Communication Channel creation
    Regards
    Sunita

  • Adapter Engine Component Missing

    Hi All,
    In the Integration Directory, The Adapter Engine field dropbox is not showing the central Adapter Engine component.Because of this the adapters (other than HTTP and IDoc adapters)can't be used during configuration.
    Can anyone help?
    Thanks and Regards,
    Soumya

    Hi Soumya,
    Go thru following document from service.sap.com , it may help you about Adapter Engine Components are configured or not .
    https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
    Hope this helps
    Regards,
    Moorthy

  • Adapter engine empty in Integration Directory

    Hi
    when I try to create a Business System in Integration Directory and I am configuring the communication channel
    (for example File Adapter or RFC )
    the field "Adapter Engine" is empty and has no selection to choose from.
    Is there a problem in configuration or else? I have no idea.
    Any help is appreciated and points will be rewarded

    HI,
    I think the problem is your Adapter metadata is not imported.
    Import the SAP BASIS Software Component into the Integration Repository.
    For more-
    Copy XI3_0_SAP_BASIS_<version> (6.40,7).tpz from <Components DVD>/XI /XI_CONTENT to directory /usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/
    After that go to Integration Repository->Tools->import Design Objects and then import it.
    Regards,
    Moorthy

Maybe you are looking for

  • Exporting Data from one table to another

    How do I do this. I'm truly a novice DBA in training. Can someone please help me

  • Saving file to database

    Hello i am designing a website for my company  so my clients can easily view project reports and progress. i want to create a database that will allow me to upload updated drawing files and provide a download link and description so my clients can do

  • I'd try to register my macbook pro but Apple says that It is already registered.

    I'd try to register my macbook pro but Apple says that It is already registered.

  • A GENERIC DATASOURCE SCENARIO -URGENT

    I have few reports for BOM data is to be pull into bw all the reports contain the same tables Mentione below MAST- material to BOM LINK STKO- BOM header STPO- BOM ITEM STAS- BOM ITEM SELECTION how should i create ageneric datsource satisfying that al

  • SQL/XML performance and xdbcore-parameter

    Hello, I try to figure out, what the best method to retrieve large XML-Documents is. I compare performance and resources needed for: SQL/XML, DBMS_XMLGEN, SYS_XMLGEN and XSU. With a fixed set of 1000 rows I created XML of about 32 MB. I am on 10.2.0.