Communiaction Channel Monitoring i.e in the Message disply tool.

Hi Experts,
                  when iam monitoring the sendor communication channel i.e in the message displly tool the message is Delivering to channel: CC_rfc_rcv_income_new,(this is  Receiver communication channel.),The message contacct is showing receiver contacts not  the sendor contacts.
       But in the SXMB_MONI monitoring showing  correct payload.
Can anyone suggest me please?
Regards,
Giri.

The message contacct is showing receiver contacts
What do you mean by message contact? Recheck the channel name and compare it with the channel name provided at sender agreement in ID. The naming convention of the channel also suggests that it is the receiver channel.
Regards,
Prateek

Similar Messages

  • Communication channel  monitoring did not record the processing detail

    Hi,
    I have a proxy-to-file scenario. Usually, I can see the processing details for the receiving file communication channel in Communication channel  monitoring with the Message ID and Explanation. And if I click the Message ID, it will give me processing steps in Audit Log. However, I don't see this log for last night's run. In SXMB_MONI, it shows me 2 messages were successfully sent out. The second message should be appended to the first message in receiver file. But the receiver side only got the first message data. Is there any way I can find out why the second message did not reach to the receiver?
    Thanks in advanced!
    Meiying

    Hi
    Try opening directly
    tools->Internet Options->Advance, uncheck show HTTP friendly error messages under Browsing, then try
    http://<host>:<port>/mdt/channelmonitorservlet
    You need the authorizations of user group SAP_XI_ADMINISTRATOR with the role modify.
    also refer
    No "Adapter monitoring" in runtime workbench

  • SQLException in the audit log for the Message Display Tool

    Hi
    I´m newbie in PI Technology, and i have some issues when i try to do the next.
    This is the scenario:
    I need to communicate two systems, for one side i have SAP, and for the other side i have ADI (legal system) so, i use PI to do this (the communication), PI receive the data from SAP by means abap proxy, until this everything is correct, then i do the mapping of the data and i send a message to ADI (with the SAP XI Runtime Workbench) by means JDBC adapter, if i check the sended message with "Message Display Tool" show that the message was sent (status "Delivered") but if i check the received messages option, in the audit log displays the five next errors:
    Error: Could not execute statement for table/stored proc. "FADIA4" (structure "StatementFADIA4") due to java.sql.SQLException: FADIA4 in FILEMET not valid for operation.
    Error: JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'FADIA4' (structure 'StatementFADIA4'): java.sql.SQLException: FADIA4 in FILEMET not valid for operation.
    Error: MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'FADIA4' (structure 'StatementFADIA4'): java.sql.SQLException: FADIA4 in FILEMET not valid for operation.
    Error: Adapter Framework caught exception: null
    Error: Delivering the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'FADIA4' (structure 'StatementFADIA4'): java.sql.SQLException: FADIA4 in FILEMET not valid for operation..
    if there are somebody that maybe could know what is the problem?, could the problem be the side of the legal system?, because inside of PI when i do the Test Configuration in the Integration Directory, the end of the test is successful.
    Any comment is well received!!
    Thanks,
    Vicman
    P.D. sometimes the error is: java.sql.SQLException: Token ) was not valid. Valid tokens: DAY PATH YEAR LABEL MONTH OPTION RESULT CONNECTION TRANSACTION.
    what does it means?

    Hi Pooja,
    thanks for you quickly response!
    XML sended:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:MT_PgDocVentaECC_req xmlns:ns0="http://gmodelo.com/ECC/enviarCobranza">
       <DT_DatosDeControl>
          <MIDDLEWARE_ID/>
          <QUICK_ID/>
          <INTERFACE_NAME/>
          <MESSAGE_ID/>
          <LOG_ID/>
          <USER_ID/>
          <SOURCE_SYSTEM/>
          <TARGET_SYSTEM/>
       </DT_DatosDeControl>
       <DT_PagoDocVentaECC>
          <VKORG>TVKO</VKORG>
          <VKBUR>TVBUR</VKBUR>
          <VKBUR1>TVBUR</VKBUR1>
          <ROUTE>TVRO</ROUTE>
          <ROUTE1>TVRO</ROUTE1>
          <BLART>Q</BLART>
          <BELNR>100</BELNR>
          <WRBTR>200</WRBTR>
          <LFART>100</LFART>
          <VBELN>100</VBELN>
       </DT_PagoDocVentaECC>
    </ns0:MT_PgDocVentaECC_req>
    this is the XML received:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns1:MT_PgDocVentaADI_req xmlns:ns1="http://gmodelo.com/ADI/recibirCobranza">
    <StatementFADIA7>
    <FADIA7action="INSERT">
    <Table>FADIA7</Table>
    <Access>
    <NUMCIA>123</NUMCIA>
    <NUMALM>234</NUMALM>
    <SUBALM>300</SUBALM>
    <CVETOP>16</CVETOP>
    <FOLOPV>22</FOLOPV>
    <SECOVA></SECOVA>
    <IMPOVA>200</IMPOVA>
    <ALMOVA>5678</ALMOVA>
    <SUBOVA>21</SUBOVA>
    <TOPOVA>21</TOPOVA>
    <FOPOVA>41</FOPOVA>
    <FECOVA>100</FECOVA>
    <STSOVA> </STSOVA>
    </Access>
    </FADIA7></StatementFADIA7>
    </ns1:MT_PgDocVentaADI_req>
    what do you think about it?, anything wrong?

  • I have to keep going back to utilities first aid and do a disck permission repair because my monitor keeps going to sleep. this is  the message i get.Permissions differ on "System/Library/PreferencePanes/.Displays/V1/Displays.prefPane/Contents/Resourc es/

    I have to keep going to disk repair to correct an issue that makes my monitor go to sleep the message i get is
    Permissions differ on “System/Library/PreferencePanes/.Displays/V1/Displays.prefPane/Contents/Resourc es/pt.lproj/DisplaysPref.nib”; should be -rw-r--r-- ; they are -rwxr-xr-x .

    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.
    Intel-based Macs: Resetting the System Management Controller (SMC)...
    http://support.apple.com/kb/HT3964

  • Custom Adapter - No content in Communication channel Monitoring for JCA

    HI,
         We have developed a Custom Adapter for our client in XI with name JCA and it is working absolutely fine.
         Issue: We are not getting any entries in Communication Channel Monitoring for success or Error Messages.
         We have used Audit log for success or Failure entries and they are coming fine in Messaging System but there coule be a standard way to get entries in Channel Monitoring.
        Our client needs the entries in CC monitoring instead of Customised Audit Logs.
        Please help.
    REgards,
    Anurag Garg

    HI Satish,
                     Thanks for answer. I am looking for this in Custom Adpater not in adapter module.
                     This log  creates a trace  File . Its not to do with getting messages in CC monitoring as we do get for File Adapter or other Adapters.
                   Like- Message Successfully put into the queue.
                         -  Successfully processed.
                     Such Messages are there in sample_ra. jar file code but they are not visible in CC Monitoring.
                   I think some extra code needs to be added to activate this in Monitoring.
                   Please suggest.
    REgards,
    Anurag Garg

  • Adapter Monitoring is now part of Channel Monitoring ??

    Hello ,
    After recent upgrade to SP17 i am getting this message while trying to access adapter monitoring ? what does this mean ?
    Also is there any way to get adapter specific info ? this is in regards i am getting an error message :
    com.sap.aii.af.ra.ms.api.DeliveryException: Couldn't find delivery channel for message
    Please advice
    Krishna

    Krishna,
    From SP17, you have a new feature
    http://help.sap.com/saphelp_nw04/helpdata/en/44/46d1a56faf52d3e10000000a1553f6/content.htm
    <i>The Runtime Workbench has the following new functions:
    &#9679;     Component monitoring: Communication channel monitor
    In component monitoring, you can use the new communication channel monitor to call information about the status of your communication channels and the corresponding adapters. You can also administrate your communication channels.
    Unlike the adapter monitor, the communication channel monitor also provides current runtime information about the communication channels of individual adapters, as long as they are registered for communication channel monitoring.
    To monitor adapters that do not provide runtime information to communication channel monitoring, continue to use the adapter monitor.</i>
    Regards,
    Bhavesh

  • XI communication channel missing in communication channel monitoring

    Hello partners,
    I have a problem with communication channel monitoring.
    I have defined a communication channel of Adapter Type = "XI" in the integration directory.
    I have also sent messages successfully via this communication channel.
    But the communication does not appear in the list of available channels in the selection list of the communication channel monitoring.
    Can someone tell me how I can get monitoring info of an "XI" communication channel?

    Hi,
    From SP17, you have a new feature
    http://help.sap.com/saphelp_nw04/helpdata/en/44/46d1a56faf52d3e10000000a1553f6/content.htm
    <i>The Runtime Workbench has the following new functions:
    &#9679; Component monitoring: Communication channel monitor
    In component monitoring, you can use the new communication channel monitor to call information about the status of your communication channels and the corresponding adapters. You can also administrate your communication channels.
    Unlike the adapter monitor, the communication channel monitor also provides current runtime information about the communication channels of individual adapters, as long as they are registered for communication channel monitoring.
    To monitor adapters that do not provide runtime information to communication channel monitoring, continue to use the adapter monitor.</i>
    Regards,
    Bhavesh

  • Commuication Channel monitoring for SOAP Adapter

    Hi friends,
    When i see Sender soap adapter status in Communication channel monitoring.I am getting the status as:
    Channel started but Inactive
    What does that indicate?
    Kindly update what i need to do..

    Check these links :
    SOAP adapter - Channel started but inactive (case inside)
    SOAP Adapter status stay "Channel started but inactive"
    it ll be solved by given solutions in these thread like send messages,cache refresh..

  • Communication channel monitoring is not working

    hi all,
    in RWB when i click on COMMUNICATION channel monitoring it is throwing the error like 'request resource is not available'.
    how can i resolve this..
    regards,
    KRUSHI

    Hi
    Try opening directly
    tools->Internet Options->Advance, uncheck show HTTP friendly error messages under Browsing, then try
    http://<host>:<port>/mdt/channelmonitorservlet
    You need the authorizations of user group SAP_XI_ADMINISTRATOR with the role modify.
    also refer
    No "Adapter monitoring" in runtime workbench

  • Issue with RWB Communication Channel Monitoring

    Hi All,
              I am getting a error in RWB >> Communication Channel Monitoring.
    I deactivated the receiver JDBC adapter, and now when I activate it, in the RWB it shows <i><b>'Channel started but Inactive'</b></i> I tried to start and stop the channel and also activating and deactivating the channel. But no success, it keeps showing <i><b>'Channel started but Inactive'</b></i>. Pls advice....
    XIer

    Hi XIer,
    Ideally adapter status should be in green when it is up and running..
    if it not then..
    1. check the status in ID. It should  be in active state.
    2. check the status in RWB .It should be in green. I not check that your adapter got activated without any  cache error.
    3. Do a CPA Cache Refresh.

  • Unity Connection 9.1.1 - The message is currently unavailable

    I've got a customer on a single node CXN 9.1.1.20000-32. Every user is unable to access saved messages only with the error message "The message is currently unavailable". I'm not sure how to troubleshoot that. I'm not aware of a single service which is responsible for only saved messages, and there doesn't appear to be a storage space issue. I shotgunned it a bit and rebooted the server. No change though.
    Any ideas?
    thanks,
    will

    Some additional information:
    In typical end user fashion, only saved messages within a specific date range are unable to be placed via the tui (vs ALL saved messages as previously reported). This is output from a port monitor while a user is trying to access one of said messages:
    11:26:36,                         State - SubMsgPlay.cde!ValidMsgStreams
    11:26:36,                         Event is [InvalidStreamEvent]
    11:26:36,                         State - SubMsgPlay.cde!MessageButBodyNotAvailable
    I can see the messages in CUDLI. The Message Archiver tool is unable to archive said messages:
    [Thread 007], [14/05/07 10:26:49], (error) fetching email via IMAP. Message detials: User alias:<user>, error=ChilkatLog:
      FetchSingle:
        DllDate: Aug  5 2012
        UnlockPrefix: LNDBRGIMAPMAILQ
        Username: <me>
        Architecture: Little Endian; 32-bit
        Language: .NET 4.0
        VerboseLogging: 0
        fetchSingleEmailObject:
          FetchSingleComplete:
            ImapCmdSent: aaad UID FETCH 67 (FLAGS INTERNALDATE BODY.PEEK[])
            ImapCmdResp: aaad NO The specified message set is invalid.
          --FetchSingleComplete
        --fetchSingleEmailObject
        Failed.
      --FetchSingle
    --ChilkatLog
    Any ideas?
    thanks,
    will

  • Problem with "Message Display Tool"  PI 7.0 SP10

    Dear SDN,
    After upgrading PI 7.0 from SP09 to SP10 the "Message Display Tool" does not work well.
    When executing:
    "Runtime Workbench" > Message Monitoring > Integration Engine > Details (of a selected message) > "Message Display Tool" > Message Content
    initial dynpro is displayed asking for Message ID, Pipeline, Inbound, Outb., Queue parameteres.  This did not happen before, before we got Message Detail directly.
    Have you had this problem? Any ideas?

    Hi,
    I am able to see Message Data, on clicking on Details in the Message Monitoring for the each message. I am in SP10
    regards,
    Moorthy

  • Incorrect Format message display in Message Displaying Tool of RWB

    Hi,
    I am not getting message payload in XML format in RWB>Message Monitoring>Message from component>Adapter Engine(database)>display.
    By selecting the message>it will open the Message Display Tool(Details Display)> Goto Message Content tab>Message Part>Payload
    Im not getting mesg in XML format .
    Displaying as :
    HEMA DEMA S1 18 1 10686 03052012 502043 6480 03052012 R2 HEMA DEMA S1 18 2 10686 03052012 502044 3750 03052012 R2
    HEMA DEMA S1 18 3 10686 03052012 602695 360
    How to get in XML format .

    Hi Shabarish Vijayakumar ,
    Thanks for quick replay.
    I am not  getting an proper XML payload for my ABAP Proxy to JDBC interface. I can see the message in normal format as text format.
    As  it should be display as JDBC receiver format structure.
      <?xml version="1.0" encoding="UTF-8" ?>
    <ns1:MT_InvoiceInfo_Header xmlns:ns1="urn://abc/xi/abc">
      <StatementName>
      <SAPPrimaryInvoiceHeader action="INSERT">
      <table>SAPPrimaryInvoiceHeader</table>
       <access>
      <BusinessUnit>abc</BusinessUnit>
      <TerritoryCode />
      <PurchaseCategoryCode>S1</PurchaseCategoryCode>
      <SAPInvoiceNumber>0204000407</SAPInvoiceNumber>
      <OrderNumber>20000426</OrderNumber>
      <SAPCustomerCode>00020120</SAPCustomerCode>
      <SAPDeliveryNumber>0820004404</SAPDeliveryNumber>
      <SAPInvoiceDate>20120302</SAPInvoiceDate>
      <NetValue>18.78</NetValue>
      </access>
      </SAPPrimaryInvoiceHeader>
      </StatementName>
      </ns1:MT_InvoiceInfo_Header>
    (SAPPrimaryInvoiceDetailabcDABLS1901068910000100000000000005000841.000 145.00 123.99 0.00 SAPPrimaryInvoiceDetailabcDABLS1901068910000100000000000005000841.000 145.00 123.99 0.00)
    Regards,
    Ahmed.

  • How To Turn On SYNCHRONOUS MESSAGE Viewing in message display tool

    Hi everyone,
    We want to view the Synchronous Messages in the message display tool using the url: http://port/messaging system/monitoring , but we are not able to do that  as when we are trying to view a particular synchronous message, we are displayed the following message:
    <b>"The message Bytes for this synchronous message in final state have been removed from the memory to save resources"</b>
    can any one suggest what we should do to view the synchronous messages in <b>Message Display Tool.</b>
    regards,
    Rookie.

    Hi,
    U need to go to Visual Administrator:
    Services | SAP XI AF Messaging:
    KEY: messaging.syncMessageRemover.removeBody
    VALUE: false
    This way your sync messages will be viewable in AF.
    Best Regards,
    Daniel
    Message was edited by:
            Daniel Engsig-Karup

  • How to enable message mapping tools in design integration buldier?

    Hi,
    The message mapping tools like 'Map selected fields and substructures if names are identical', 'Clear mapping', 'Data flow editor', 'Text Preview', 'Dependencies', etc are not enabled in our PI. The version of PI is PI_BASIS 2005_1_700 and the java version installed on PI server is 1.4.2. Is it something to do with compatibility or options to be enabled in some settings? Please help.
    Regards,
    Priyanka S

    Hi Priyanka,
         Uninstall Java 1.4.2 and try to reinstall again it should work.
    Regards,
    Naveen

Maybe you are looking for