Communication error code 243
Can't receive fax messages due to error code 243
Hi gailina,
To assist you further on the issue please give me the details of the printer and when do you get the error code.
Regards
Aneesh
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"
Similar Messages
-
Scheduled Delivery communication error
See the post at this link: If your Scheduled Delivery apps stopped printing
I work on behalf of HP.Hi gailina,
To assist you further on the issue please give me the details of the printer and when do you get the error code.
Regards
Aneesh
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution" -
6500a e710 a-f - Scanner Communication Error Windows 8.1
We have been experiencing issues with scanning whilst connected via USB, using the HP Scan software. The software returns an error message saying scanner communication cannot be established, half way through scanning. Then HPScan.exe fails to load again. The printer just says “scanning cancelled” on its display.
This is only effecting one model of PC and that is a HP 8300 Ultra-Slim PC.
We are running Windows 8.1 64 bit from an image install. However, I have tested this with a fresh Windows 8.1 retail installation and get the same problem.
We have tried various actions to fix this:
- Various accounts, admin accounts, domain admin accounts, local accounts etc.
- Uninstall and reinstall. Basic and Full driver packages including the latest versions
- Removed all other HP software from PC including registry keys
- Used built in Windows 8 scan software with basic driver
- All USB ports tested including 2.0, 3.0 and powered / non-powered
- Replaced cables
- Re-isntalled USB bus drivers for 8300
- Followed the print/scan doctor which shows a driver error - scandriver unable to communicate with product
- Run HPScan in compatibility mode for 7/XP
- Updated firmware on printer
- Installed latest Windows Updates
- Checked WIA service and dependencies are running
- Semi and Full factory resets on Printer
- Shell hardware detection service set to manual
- We have replaced the printer for an affected user - same issue
- Also replaced PC for an affected user - same issue.
- Updated PC BIOS
I have tested connecting the printer to the router with a network cable and then installing printer as a networked device rather than USB and then the hpscan.exe works. So this is only an issue with USB (though it wouldnt be practical to try and talk 200+ users through networking their printer).
As you can see, we have tried almost everything. Interestingly we havent been able to replicate this issue in one of our main offices - despite collecting the same PC and Printer from an estate and bringing it back to an office.
We have also sent out a working PC and Printer combo to an affected estate office and it has not worked there.
Our Estate Offices connected via an ADSL Router and "My Documents" are re-directed to a network location. Could a failure in accessing this network location cause the problems? I have tested connectivity to network store from PC and it accesses the files fine.
Any solutions would be greatly received, I have spoken to HP After Sales support but not received an working solution yet.Greetings, @Scammell29
I have read through your post and have very ideas left for you, as you've tried quite the load of troubleshooting!
I am thinking the issue could be power related, so try a power reset and plug the printer in directly to the wall outlet. Avoid power bars, surge protectors, etc. Just a direct plug in to the wall to test the power. Afterwards, see if you still receive the communication error.
If the issue continues, next try a disk cleanup, the instructions are included in this guide: A 'No Computer Detected' or 'Connection Error' Message Displays during Scanning for HP Officejet 650...
If the error still persists, perform a Clean Boot and restart the PC and then disable the Firewall and Anti-Virus scanners.
Please let me know the results!
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
4.6 sync configuration error code 0x3b21
Hi. I've finally got desktop manager 4.6 running and my blackberry 8330 backed up. When I try to configure syncronization for Outlook 2000, the error "Warning encountered--warning code 0x3b21 check documentation" comes up. I'm having trouble tracking down the code/problem. Any suggestions?
Thanks!Hi,
From what I can see in the documentation for 4.6 it does not support Outlook 2000.
I suggest 3.6. Outlook 2000 was discontinued in 4.0
Download 3.6 from here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Please let me know how it goes.
Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
Serial Communication Error -1073807253
Hello!
I'm trying to make a simple serial port reader VI and i can't get over this:
Error -1073807253 occurred at VISA Read in communication.vi
Possible reason(s):
VISA: (Hex 0xBFFF006B) A framing error occurred during transfer.
I'm pretty shure that the device sending a data works properly and the parameteres like a boud rate, parity etc. are set correctly because I've already communicate with that device via Matlab.
Although I've noticed that somebody here have the problem with this error, but I can't find any solution for me.
There is a picture of my simple VI diagram in Attachments. The parameters of the communication are set at the beginnig, after that and a litle delay the input buffer is flushed, then the loop starts. When the buffer contain nine or more bytes this bytes are readen.
Please, can anybody tell me what I'm doing wrong?
Thanks
Attachments:
VI-rs232-trouble.jpg 106 KBchikvadrat wrote:
The VI works well after launch. It also read first 9 character correctly, but after that it crashs.
So what happens if by the time the loops comes back around, you have 10 bytes waiting for you at the port?
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all. -
Problem with TCP/IP communication: error ni-448 when I want to write on a TCP/IP-connection
Hi folks
I have a really annoying problem: I want a computer (Win XP, Ethernet board, Labview 7.1) to communicate with my robot controller (Win 2k, Epson SPEL+ language). The robot controller is the client, the LabViewPC the server. now reading messages sent by the robot controller are no problem to read. But when I want to send messages from the LabViewPC to the robot controller I get an error message: error ni-448, make sure that the GBIP-controller is the primary controller.
For the communication I open a TCP-listener and a TCP wait listener in a while loop. So far this works. Then I use the TCP-write function to send a string to the robot controller. Here the error described above occurs. So the communication doesn´t work.
Can anybody help me?
Please. Thank you in advance!hi there,
are there several network adapters on your host? if so pass the IP of the network adapter to the "TCP listen.vi". i'm not sure but i think i remember that in former versions this had no effect. then you could use "TCP Listen.vi" on your slave and "TCP Open Connection" function on your host.
you can use the "Simple Data Server" and "Simple Data Client" examples for a quick test.
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!" -
I've tried the suggestion "Please try the following: Disconnect your device and restart your computer. Restart the loading process" multiple times with or without battery, but still the same.
This error propmpted while loading the system software.
Anyone encounter this issue befire and how to fix it, really appreciated
Thanks.I found it in loader.log
[3] [8est:58:28:921] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Writing to Loader Action Log "52BE2234:3.10.0.47TM connection type: PC"
[3] [8est:58:28:923] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Got LAL_RESPONSE
[3] [8est:58:28:927] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Retrieving persistent data struct
[3] [8est:58:28:928] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Got persistent data struct
[3] [8est:58:28:928] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Retrieving Blocked OS CFP
[3] [8est:58:28:929] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Got Blocked OS CFP
[3] [8est:58:28:929] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Getting the Device PIN
[3] [8est:58:28:929] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Got Device PIN
[3] [8est:58:28:929] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Getting the Device BSN
[3] [8est:58:28:930] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Got Device BSN
[3] [8est:58:28:931] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Corrupting opposite QNX partition 1, on archive load
[3] [8est:58:28:980] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Programming Flash. Filesize: 1834156032 total bytes
[3] [8est:58:39:751] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:1143] Command failed due to timeout
[1] [8est:58:39:753] [CfpProgrammer] [0x00002f9c] [CfpProgrammer.cpp:859] cfp operation failed (15): "Device communications error encountered. [A:0x0000000F]
Please try the following:
- Disconnect your device and restart your computer.
- Restart the loading process."
[1] [8est:58:39:753] [QnxProgrammerHelper] [0x00002f9c] [QnxProgrammerHelper.cpp:288] CFP::LoadQCFMFile failed. Error: F
[1] [8est:58:39:754] [QnxProgrammerHelper] [0x00002f9c] [QnxProgrammerHelper.cpp:322] WriteModule OS failed.
[20] [8est:58:39:757] [Loader] [0x00002f9c] [Loader.cpp:877] Switching connect state from 3 to 0 (timeout 15000 ms)
[20] [8est:58:39:757] [USBEnumManager] [0x00002a20] [USBEnumSerializer.h:66] Lock requested, maximum wait = 180000 ms
[20] [8est:58:39:757] [USBEnumManager] [0x00002a20] [USBEnumSerializer.h:70] Lock acquired
[3] [8est:58:39:757] [CfpProgrammer] [0x00002a20] [CfpProgrammer.cpp:1143] Requesting BootImage Exit -
How to resolve the serial communication error in HP34970?
I want to use serial port to commnucation between pc and hb34970. In gpib mode, it is ok. But in serial mode, report error. just like this:
for setting com2:
16:11:47.359 2009-8-26 [Init_dq_Device]error:-1073807339--HP34970A Initialize.vi->Init_DQ_Device.vi->main_app.vi VISA read.visa name:ASRL2::INSTR
for setting com1:
16:13:25.921 2009-8-26 [Init_dq_Device]error:-1073807339--HP34970A Initialize.vi->Init_DQ_Device.vi->main_app.vi VISA read.visa name:ASRL1::INSTR
I don't know the meaning of -1073807339 and whether i should set:ASRL1::INSTR for com1. Anyone can help me about this problem.
Thanks very much.
attach my subvi.
Solved!
Go to Solution.
Attachments:
Init_DQ_Device.vi 48 KBHi, Dennis Knutson
very glad to see you.
For my vi, i only provide a UI for user to select GPIB or serial mode, and setting related port.
About "Also, the 34970 llb you are using should be replaced with the 8.x project library.", What do you
mean? There is a new driver for 34970,right?
I search the forum and find a old thread:Agilent 34970 Visa Timeout.
There is your answer:
I made a mistake. The initialize function already had a timeout function. I just didn't look at the VI closely enough. There is a case statement that sets either the serial port parameters or just sets the VISA timeout. If you are setting the timout right after the VISA Open, it's just getting set back to 10 seconds. Change it in the case statement and see if that works. Sorry, and I hope this works.
Do you think this is the same with my problem? Your mean to modify default 10 seconds to more longer timeout,right?
Thanks. -
HP Photosmart C4380 [8A36CB] communication error with MacBook OS 10.7.5 over wireless
Hi,
I keep getting the message 'communication error' when trying to print wireless to a Photosmart C4380 from my MacBook (OS 10.7.5) through a TimeCapsule 2Gb router.
The message also says: "/usr/libexec/cups/backend/dnssd failed" but I don't know what to do with it...
I tried to de- and re-install, restart laptop, printer and router and pull all plugs in different sequences, first use the USB cable to install wireless and all other help from HP ... but nothing seems to work (HP Doctor is not available for Mac).
The strange part is that:
1.it started a couple of weeks ago, without having changed anything (by my knowledge),
2. printing from my iMac works fine (same wireless network, same software version, same settings, etcetera)!!!
2. printing over USB from my MacBook works fine
3. I can print a test-page from "HP Utility" form my MacBook (and of course from my iMac but that one works fine anyway)
4. I can access the printer through "http://hp8a36cb.local./index.htm?cat=info&page=printerInfo" and there are no issues mentioned whatsoever,
5. the 'HP Network Configuration Page' and the 'Wireless Network Test Report' congratulate me on the successful setup of my wireless printer... but it doesn't work.
I've read almost all posts about communication errors over wireless but haven't found an answer to my issue (yet).
Is there anyone with a solution? Please??
This question was solved.
View Solution.Download and install this: http://support.apple.com/kb/DL907
Restart your Mac.
Reset the printing system:
- Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and then next to the "Use" pulldown, select the printer model (not AirPrint). Wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Communication error with GPIB
Hello,
i am using GPIB card but its not communicating.
The Error is : Error connecting to Driver or Device.
I have tried it all possible ways, and one thing is that its not shown
in the Measurement Automation Explorer software.
Any one has solution regarding that pls send me an email
[email protected]
i am desperately waiting.
thnx
Bye.
Safdar...Is this an NI card? What model? Does MAX show that NI-GPIB is installed (assuming you have an NI card)?
-
Thanks for the info, Kyle. I will probably try to find an older 32-bit XP machine. VM is just not an option for me right now.
Hello everybody,
I am trying to use the DIgilent Spartan 3E board with Labvew 2012 SP1 32 bit. I am able to compile the example code for LED shift. I am however unable to transfer code to the FPGA. I get the following error message:
Error Code: -310602
NI-COBS: Unable to communicate with device over communication cable.
Please verify that the cable is connected to a supported device and that the appropriate drivers are installed.
My system configuration is as follows:
Windows 7 (64 bit) on Dell XPS laptop.
Labview 2012 SP1 (32 bit)
Labview FPGA 2012 SP1
Labview 2012 FPGA support for Spartan3E
Xilinx 13.4 tools
DEFB LV FPGA 2012sp1 support installer
Xilinx USB cable driver v1.3 installed.
I took all the precautions mentioned by others on this forum and others, mainly that the cable must be disconnected before installing the Xilinx cable driver. All software and drivers were installed correctly. I even uninstalled and reinstalled the entire Labview software set I had. I still get the same error.
A few other questions:
1. Is the Xilinx cable different from a regular USB cable of the same configuration ?
2. When I program the FPGA I only have the USB cable connected between my computer and the Spartan 3e board. Should any other cable be connected ?
3. What should be the correct jumper settings for J1 - JP30 (especially J30, J11, JP9, JP6, JP7, etc) ?
I have been at this or over 3 days trying to figure it out. Any help will be greatly appreciated.
-
Hi everyone,
Backup jobs for protected members are intermittently failing with the following error on the DPM server:
DPM failed to communicate with the protection agent on <DPM 2010 SERVER> because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)
Why does the DPM server failing to see it's own DPM agent cause the backup job for another server to fail? One day a backup will work fine, the next it may fail; and the next back to normal again...
The following error is recorded in the Service Control Manager event log on the DPM server just prior to the above error:
A timeout was reached (30000 milliseconds) while waiting for the DPMRA service to connect.
Thank you.
With regards,
RobHello,
I have read these entire postings and see that my problems match most of the above problems.
I believe we have tried all of the ideas in this blog and lots of other ideas from other forums and internet searches.
We have about 80 small databases protected and set at 15 minute incremental and most will work but some fail. When they fail the most common, but not only error, is something like "DPM
failed to communicate with the protection agent on <DPM 2010 SERVER> because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)". The alert is inactivated in the DPM Console, and the backups resume as normal."
Since later jobs are successful I thought all was well. All was well until I went to restore from incremental backups. We worked for two days (day and night work) to restore
from a corrupted virtual disk on our SQL Server 2008 R2. I suspect DPM had something to do with the corrupted virtual disk. All I know is that we never had this problem until installing DPM. Here is what we encountered when we went to restore
from the protection points:
* Restore jobs take a minimum of 15 minutes for jobs that are 45 MB or 2 GB.
* If you pick a backup from the list of recovery points that is not valid the job runs for 15 minutes and then "Failed".
* You cannot rerun the job because SQL Server 2008 has the table being recovered as <tablename> (recovering) and a retry will not work. Of course time is wasted while waiting
to see if it worked.
* Eventually you realize that even after dropping the table in the (recovering) mode in SQL that the restore point must be bad or possibly one of this failed recovery points.
* So begins the quest to start restoring recovery points one by one and 15 minutes by 15 minutes until you find one that actually restores to a SQL Instance.
* If you have 80 of these to do and you average trying three recovery points and each takes 15 minutes, not to mention the time to drop the table in SQL, well that time adds up to 3,600
minutes of trial and error. 60 hours of trial and error, wow not much of a savings using DPM over a SQL backup plan.
* And then you have to explain to your customers that their databases were restored but you do not know at what point the DB was restored.
All in all it seems like DPM concept is great but like many backups the backup plan looks good on paper but actually restoring a backup is quite a different matter.
I don't know if anyone has ever solved the problems presented in this forum but if they have then I wish they would post and if no one has solved the problem then shame on DPM.
Good luck everyone, but I for one have spent about two months on trying to protect and restore consistently. I have never had one day of consistent and reliable restore points. I
am going back to sql management plans for my backups. I have never, in 10 years had a sql generated backup fail me. Never.
gbl -
Old visa open, error code 1073807343, using VISA with a GPIB device, and VISA resource names
Hi everyone,
I'm trying to get a SRS model SR720 LCR meter (manual on this page) working with LabView, connecting it to my PC with an Agilent 82357A GPIB/USB interface (manual on this page). I'm running MAX version 14.0, and NI-VISA version 14.0. I'm running LabView version 13.0f2, 32 bit.
I followed the directions on this page, and I'm pretty confident I can communicate with my LCR meter, because I can go to NI MAX->GPIB0::17::INSTR under "devices and interfaces", then go to the VISA test panel, go to the I/O tab, and I can enter a few commands from the SR720 manual, like changing the frequency, and I see the light on the LCR meter change to what I just told it to do. Here is a picture, just to illustrate it:
Also, if I do the *IDN? command, it returns "
9: Write Operation (*IDN?)
Return Count: 5 bytes
10: Read Operation
Return Count: 41 bytes
StanfordResearchSystems,SR720,08087,1.03\n
So, that's good too. I also made the alias of this device "MyLCRmeter", but that shouldn't matter for now.
Now I'm trying to get it to work in a more usable way. The SR7xx drivers that LabView found for me came with a couple sample programs, one called "Getting Started.vi". I tried to just simply see if it worked, changing the "instrument descriptor" field to "GPIB0::17::INSTR", since that's the one that seemed to be the right device in MAX. Here is a picture of the front panel of "Getting Started.vi":
Trying to run it like this gave me this error (code -1073807343):
Old VISA Open in SR715/720 Initialize.vi->SR715/720 Getting Started.vi
Doing a bit of searching on these forums, I found these few threads (1 2 3), which seem to tell me that, since this program was written, the way you open VISA has changed. In the 2nd of those links, one guy said:
You just have to replace the Old VISA Open function with the VISA Open that is on the Instrument I/O>VISA>VISA Advanced palette. When you do that, the wire to the string that was used for the resource name will be broken. Delete the string and make the actual VISA Resource Name visible on the front panel. Wire the VISA Resource Name control to the connector pane where the string control was (upper left connection).
So, I went into the sub-VI Initialize.vi, and did that. Here is a picture of what the front panel and block diagram of the sub-VI Initialize2.vi (I changed the name in case I screwed things up, but I'm pretty sure the new one is the one being called by Getting Started.vi) looked like before I changed anything (you can see the Old VISA Open):
and here it is after replacing that with the regular VISA Open, deleting the instrument descriptor string and replacing it with a VISA resource, and connecting that to the VISA Open:
However, as you can see in the image above, and it seems like someone else had this problem in the 2nd thread linked above, I don't see my device listed in the drop-down menu (even if I refresh), only "LPT1" (I don't even know what that is):
No, I wasnt able to select the visa resource from the pull down menu. somehow it seems disabled or something.
If I just enter the VISA resource name from MAX manually, GPIB0::17::INSTR, and save and try running that, I get the error(code -1073807346):
VISA Open in SR715/720 Initialize2.vi->SR715/720 Getting Started.vi
So I'm not sure where to go from there, or why it's not in the drop down menu to begin with. I'm sorry if I've missed something but I've searched about as far as I can go. If I had to guess, maybe one thing could be that in MAX, under Tools->NI-VISA->VISA Options->My System->Conflict manager, I have both Agilent VISA and NI VISA enabled; I know sometimes problems arise from conflicts between different software fighting over the same hardware. Is this okay, or do I need to change it?
Thank you and please let me know if there is any other code/screenshots I could provide that could help!Hi, I did indeed enable NiVisaTulip.dll under MAX->Tools->NI-VISA->VISA Options->My system->Passports->List of passports. Sorry, I should have mentioned that explicitly.
By install as primary, do you just mean as it is here, where it is selected as the "Preferred VISA"?
Or somewhere else? I installed NI-VISA first I believe, and then the Agilent one, and during the installation of the Agilent one, I'm pretty sure I made it not the primary. Here's what I have in the Agilent (it's called Keysight now) Connection Expert software:
I also have this under the "Keysight 488 options" tab:
Should that be checked? I don't actually know the role of VISA vs 488 here...
What could I try?
Thank you! -
Error code 63003..while running a FPGA prog on Host PC using FPGA reference VI
Hi,
when i run my FPGA program on HOST PC using a FPGA reference vi on windows platform, I get an error code 63003 (FPGA bit file out of date). When I go back, recompile and run the FPGA program on the FPGA target, then shut it and come back to HOST PC and run my application with FRGA Open refence vi, it runs with out any error! Does any one know why I get that error code 63003This error means that the VI which is downloaded to the FPGA was changed on the host/development system, but has not been recompiled. By recompiling it you resolve this problem.
When a LabVIEW FPGA VI is compiled for the FPGA, the bit stream, which will be downloaded to the FPGA, is stored in the VI file. When LabVIEW RT or LabVIEW Windows attempts to download the bit stream to the RIO card, it makes sure the bit stream corresponds to the VI source code in the same file. This is necessary so that the host application can properly communicate with the VI on the FPGA. If the two are not the same, this error is generated from the Open FPGA VI Reference function in the host application.
Christian L
NI Consulting Services
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense -
Error code 0x00000004 when installing Yosemite?
I have a family member's 2012 13 inch MacBook Pro that failed to boot one day (month ago). I've tried to restore via Recovery and install from all OS's I have available to me (Mavericks and Yosemite). I've downloaded each OS from the Mac App Store. Each time I try to install Mac OS X I get an error. While Mountain Lion (was installed on recovery partition) never included any information, Mavericks and Yosemite gave me an error log. After scanning it, I found the error code of 0x00000004.
In reading other threads, I understand this may be a faulty RAM stick issue? Anyone had this error before? Are there hardware tests I can run? The full log is below.
Feb 28 23:18:45 localhost opendirectoryd[123]: opendirectoryd (build 382.0) launched - installer mode
Feb 28 23:18:46 localhost opendirectoryd[123]: Logging level limit changed to 'notice'
Feb 28 23:18:52 localhost opendirectoryd[123]: Initialize trigger support
Feb 28 23:18:53 localhost opendirectoryd[123]: created endpoint for mach service 'com.apple.private.opendirectoryd.rpc'
Feb 28 23:18:53 localhost opendirectoryd[123]: set default handler for RPC 'reset_cache'
Feb 28 23:18:53 localhost opendirectoryd[123]: set default handler for RPC 'reset_statistics'
Feb 28 23:18:53 localhost opendirectoryd[123]: set default handler for RPC 'show'
Feb 28 23:18:53 localhost opendirectoryd[123]: starting endpoint for service 'com.apple.private.opendirectoryd.rpc'
Feb 28 23:18:53 localhost configd[113]: adding com.apple.SystemConfiguration.InterfaceNamer
Feb 28 23:18:53 localhost configd[113]: adding com.apple.SystemConfiguration.SCNetworkReachability
Feb 28 23:18:53 localhost configd[113]: loading com.apple.SystemConfiguration.ISPreference
Feb 28 23:18:55 localhost opendirectoryd[123]: no dynamic data found at '/System/Library/OpenDirectory/DynamicData/Configure.plist'
Feb 28 23:18:56 localhost opendirectoryd[123]: Registered node with name '/Configure' as hidden
Feb 28 23:18:57 localhost opendirectoryd[123]: no dynamic data found at '/System/Library/OpenDirectory/DynamicData/Local.plist'
Feb 28 23:18:57 localhost opendirectoryd[123]: Registered node with name '/Local' as hidden
Feb 28 23:19:15 localhost configd[113]: com.apple.SystemConfiguration.ISPreference load failed
Feb 28 23:19:15 localhost configd[113]: dlopen_preflight(/System/Library/SystemConfiguration/InternetSharingPreference. bundle/Contents/MacOS/InternetSharingPreference): Library not loaded: /System/Library/PrivateFrameworks/Netrb.framework/Versions/A/Netrb
Feb 28 23:19:15 localhost configd[113]: Referenced from: /System/Library/SystemConfiguration/InternetSharingPreference.bundle/Contents/M acOS/InternetSharingPreference
Feb 28 23:19:15 localhost configd[113]: Reason: image not found
Feb 28 23:19:15 localhost configd[113]: loading com.apple.SystemConfiguration.ApplicationFirewall
Feb 28 23:19:17 localhost configd[113]: adding com.apple.SystemConfiguration.KernelEventMonitor
Feb 28 23:19:17 localhost configd[113]: adding com.apple.SystemConfiguration.LinkConfiguration
Feb 28 23:19:17 localhost configd[113]: adding com.apple.SystemConfiguration.PreferencesMonitor
Feb 28 23:19:17 localhost configd[113]: loading com.apple.SystemConfiguration.EAPOLController
Feb 28 23:19:20 localhost configd[113]: loading com.apple.SystemConfiguration.IPConfiguration
Feb 28 23:19:25 localhost configd[113]: adding com.apple.SystemConfiguration.IPMonitor
Feb 28 23:19:25 localhost configd[113]: skipped com.apple.SystemConfiguration.Logger (disabled)
Feb 28 23:19:44 localhost configd[113]: updateConfiguration(): no preferences.
Feb 28 23:20:04 localhost configd[113]: LSExceptions [0x7fe07bc22050] loaded
Feb 28 23:20:17 localhost opendirectoryd[123]: 125.1 - Client: apsd, UID: 0, EUID: 0, GID: 0, EGID: 0
Feb 28 23:20:17 localhost opendirectoryd[123]: 125.1 - ODNodeCreateWithNameAndOptions request, SessionID: 00000000-0000-0000-0000-000000000000, Name: /Search, Options: 0x0
Feb 28 23:20:18 localhost opendirectoryd[123]: 125.1 - ODNodeCreateWithNameAndOptions failed with error 'Unknown node name' (2000)
Feb 28 23:20:26 localhost configd[113]: InterfaceNamer: timed out waiting for IOKit to quiesce
Feb 28 23:20:26 localhost configd[113]: Busy services :
Feb 28 23:20:26 localhost configd[113]: MacBookPro9,2 [1, 209928 ms]
Feb 28 23:20:26 localhost configd[113]: timed out waiting for IOKit to quiesce
Busy services :
MacBookPro9,2 [1, 209928 ms]
Feb 28 23:20:27 localhost configd[113]: InterfaceNamer: No current set
Feb 28 23:20:31 localhost Unknown[386]: kern.boottime: { sec = 1330499817, usec = 0 } Tue Feb 28 23:16:57 2012
Feb 28 23:20:34 localhost Unknown[396]: Launching the Language Chooser for an OS Install
Feb 28 23:20:37 localhost configd[113]: LSExceptions [0x7fe07bc22050] unloaded
Feb 28 23:20:48 localhost configd[113]: network changed.
Feb 28 23:20:48 localhost configd[113]: New network configuration saved
Feb 28 23:20:48 localhost configd[113]: Network configuration creation timed out waiting for IORegistry
Feb 28 23:20:50 localhost configd[113]: [bootp_transmit.c:213] bootp_transmit(): bpf_write(en1) failed: Network is down (50)
Feb 28 23:20:50 localhost configd[113]: DHCP en1: INIT transmit failed
Feb 28 23:20:50 localhost configd[113]: network changed.
Feb 28 23:20:56 localhost configd[113]: InterfaceNamer: adding default configuration for fw0
Feb 28 23:20:56 localhost configd[113]: network changed.
Feb 28 23:20:57 localhost configd[113]: InterfaceNamer: adding default configuration for en2
Feb 28 23:20:57 localhost configd[113]: network changed.
Feb 28 23:20:59 localhost configd[113]: network changed: v4(en1+:192.168.2.8) DNS+ Proxy+ SMB
Feb 28 23:20:59 MacBook-Pro.local configd[113]: setting hostname to "MacBook-Pro.local"
Feb 28 23:21:23 MacBook-Pro.local Language Chooser[397]: Setting system to install/recovery mode.
Feb 28 23:21:27 MacBook-Pro.local Unknown[398]: Setting boot completed.
Feb 28 23:21:29 MacBook-Pro.local Unknown[398]: Keyboard Layouts: duplicate keyboard layout identifier -16899.
Feb 28 23:21:29 MacBook-Pro.local Unknown[398]: Keyboard Layouts: keyboard layout identifier -16899 has been replaced with -28673.
Feb 28 23:21:29 MacBook-Pro.local Unknown[398]: Keyboard Layouts: duplicate keyboard layout identifier -16900.
Feb 28 23:21:29 MacBook-Pro.local Unknown[398]: Keyboard Layouts: keyboard layout identifier -16900 has been replaced with -28674.
Feb 28 23:21:30 MacBook-Pro.local Language Chooser[397]: Set keyboard to id: 0
Feb 28 23:21:30 MacBook-Pro.local Language Chooser[397]: Found primary language hint "English"
Feb 28 23:21:30 MacBook-Pro.local Language Chooser[397]: Told to select language that does not exist
Feb 28 23:21:30 MacBook-Pro.local Language Chooser[397]: Launching the Installer using language code "en"
Feb 28 23:21:34 MacBook-Pro.local Language Chooser[397]: Ordering out cinematic windows.
Feb 28 23:21:34 MacBook-Pro.local Language Chooser[397]: Not hiding Language Chooser in progress callback
Feb 28 23:21:47 MacBook-Pro.local OSInstaller[422]: LSExceptions [0x7fcfa84050a0] loaded
Feb 28 23:21:47 MacBook-Pro.local storagekitd[423]: Starting SKDaemon...
Feb 28 23:21:47 MacBook-Pro.local storagekitd[423]: Client entitled for destructive operations
Feb 28 23:21:47 MacBook-Pro.local storagekitd[423]: Adding client connection <NSXPCConnection: 0x7f8229d31670> connection from pid 422
Feb 28 23:21:58 MacBook-Pro.local OSInstaller[422]: LSExceptions [0x7fcfa84050a0] unloaded
Feb 28 23:22:06 MacBook-Pro.local OSInstaller[422]: connection test:success
Feb 28 23:22:06 MacBook-Pro.local Unknown[398]: 2012-02-28 23:22:06.943 OS X Installer[422:14611] connection test:success
Feb 28 23:22:09 MacBook-Pro.local storagekitd[423]: getResizeLimits returned: -69874
Feb 28 23:22:10 MacBook-Pro.local OSInstaller[422]: Failed to locate volume with UUID 6278C871-0137-3086-90B3-0597EA767B22
Feb 28 23:22:10 MacBook-Pro.local OSInstaller[422]: Hardware: MacBookPro9,2 @ 2.50 GHz (x 4), 4096 MB RAM
Feb 28 23:22:10 MacBook-Pro.local OSInstaller[422]: Running OS Build: Mac OS X 10.10.2 (14C109)
Feb 28 23:22:10 MacBook-Pro.local OSInstaller[422]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
Feb 28 23:22:10 MacBook-Pro.local OSInstaller[422]: Env: PWD=/
Feb 28 23:22:10 MacBook-Pro.local OSInstaller[422]: Env: XPC_FLAGS=0x0
Feb 28 23:22:10 MacBook-Pro.local OSInstaller[422]: Env: XPC_SERVICE_NAME=0
Feb 28 23:22:10 MacBook-Pro.local OSInstaller[422]: Env: SHLVL=1
Feb 28 23:22:10 MacBook-Pro.local OSInstaller[422]: Env: __OSINSTALL_ENVIRONMENT=1
Feb 28 23:22:10 MacBook-Pro.local OSInstaller[422]: Env: CI_DEFAULT_OPENCL_USAGE=0
Feb 28 23:22:10 MacBook-Pro.local OSInstaller[422]: Env: OS_INSTALL=1
Feb 28 23:22:10 MacBook-Pro.local OSInstaller[422]: Env: _=/System/Library/CoreServices/Language Chooser.app/Contents/MacOS/Language Chooser
Feb 28 23:22:10 MacBook-Pro.local OSInstaller[422]: Mutable product: Looking for automation file at (null)
Feb 28 23:22:10 MacBook-Pro.local OSInstaller[422]: No file at (null)
Feb 28 23:22:10 MacBook-Pro.local OSInstaller[422]: Install Config: Looking for automation file at (null)
Feb 28 23:22:10 MacBook-Pro.local OSInstaller[422]: No file at /System/Installation/Packages/Extras/minstallconfig.xml
Feb 28 23:22:10 MacBook-Pro.local OSInstaller[422]: Looking for automation file at (null)
Feb 28 23:22:10 MacBook-Pro.local OSInstaller[422]: Install will not be automated.
Feb 28 23:22:10 MacBook-Pro.local OSInstaller[422]: Install will performed using distribution/collection at /System/Installation/Packages/OSInstall.mpkg.
Feb 28 23:22:10 MacBook-Pro.local Unknown[398]: 2012-02-28 23:22:10.205 OS X Installer[422:14611] ***storageTaskManagerExistsWithIdentifier:withIdentifier failed: Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.nsurlstorage-cache was invalidated.) UserInfo=0x7fcfaa980f80 {NSDebugDescription=The connection to service named com.apple.nsurlstorage-cache was invalidated.}; {
Feb 28 23:22:10 MacBook-Pro.local Unknown[398]: NSDebugDescription = "The connection to service named com.apple.nsurlstorage-cache was invalidated.";
Feb 28 23:22:10 MacBook-Pro.local Unknown[398]: }
Feb 28 23:22:10 MacBook-Pro.local storagekitd[423]: getResizeLimits returned: -69874
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Waiting for target evaluation.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Starting target evaluation queue.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: connection test:success
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating install check for (null)
Feb 28 23:22:12 MacBook-Pro.local Unknown[398]: 2012-02-28 23:22:12.106 OS X Installer[422:15126] connection test:success
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Install check successful.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating 17 disks
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk14 Mount point: /Library/Preferences/SystemConfiguration Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk3s2 Mount point: / Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: OS X Base System is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk8 Mount point: /System/Installation Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk16 Mount point: /private/var/tmp/RecoveryTemp Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk11 Mount point: /private/var/root/Library Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk7 Mount point: /private/var/run Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk2s2 Mount point: /Volumes/Mac OS X Install DVD Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: OS X Install ESD is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk13 Mount point: /Library/Preferences Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk6 Mount point: /private/var/tmp Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk1s1 Mount point: /Volumes/Image Volume Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Install OS X Yosemite is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk15 Mount point: /Library/Keychains Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk10 Mount point: /private/var/folders Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk5 Mount point: /Volumes Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk12 Mount point: /Library/ColorSync/Profiles/Displays Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk4 Mount point: /private/var/log Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk9 Mount point: /private/var/db Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk0s2 Mount point: /Volumes/Macintosh HD Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Macintosh HD is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Finished target evaluation.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating 17 disks
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk14 Mount point: /Library/Preferences/SystemConfiguration Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk3s2 Mount point: / Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: OS X Base System is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk8 Mount point: /System/Installation Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk16 Mount point: /private/var/tmp/RecoveryTemp Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk11 Mount point: /private/var/root/Library Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk7 Mount point: /private/var/run Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk2s2 Mount point: /Volumes/Mac OS X Install DVD Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: OS X Install ESD is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk13 Mount point: /Library/Preferences Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk6 Mount point: /private/var/tmp Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk1s1 Mount point: /Volumes/Image Volume Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Install OS X Yosemite is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk15 Mount point: /Library/Keychains Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk10 Mount point: /private/var/folders Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk5 Mount point: /Volumes Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk12 Mount point: /Library/ColorSync/Profiles/Displays Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk4 Mount point: /private/var/log Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk9 Mount point: /private/var/db Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: untitled is a valid target.
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk0s2 Mount point: /Volumes/Macintosh HD Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:12 MacBook-Pro.local OSInstaller[422]: Macintosh HD is a valid target.
Feb 28 23:22:12 MacBook-Pro.local Language Chooser[397]: Hiding Language Chooser in window counter
Feb 28 23:22:13 MacBook-Pro.local Unknown[398]: Keyboard Layouts: duplicate keyboard layout identifier -16899.
Feb 28 23:22:13 MacBook-Pro.local Unknown[398]: Keyboard Layouts: keyboard layout identifier -16899 has been replaced with -28673.
Feb 28 23:22:13 MacBook-Pro.local Unknown[398]: Keyboard Layouts: duplicate keyboard layout identifier -16900.
Feb 28 23:22:13 MacBook-Pro.local Unknown[398]: Keyboard Layouts: keyboard layout identifier -16900 has been replaced with -28674.
Feb 28 23:22:25 MacBook-Pro.local OSInstaller[422]: connection test:success
Feb 28 23:22:25 MacBook-Pro.local Unknown[398]: 2012-02-28 23:22:25.140 OS X Installer[422:14801] connection test:success
Feb 28 23:22:36 MacBook-Pro.local OSInstaller[422]: Disabling system idle sleep.
Feb 28 23:22:36 MacBook-Pro.local OSInstaller[422]: X /Volumes/Macintosh HD: Missing CoreServices.
Feb 28 23:22:36 MacBook-Pro.local OSInstaller[422]: Dist disk is not root.
Feb 28 23:22:36 MacBook-Pro.local OSInstaller[422]: OSI: com.apple.pkg.BaseSystemResources remapped external root path to: /
Feb 28 23:22:36 MacBook-Pro.local OSInstaller[422]: Should convert to CS
Feb 28 23:22:38 MacBook-Pro.local OSInstaller[422]: Repairing file system.
Feb 28 23:22:38 MacBook-Pro.local OSInstaller[422]: Evaluating 1 disks
Feb 28 23:22:38 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk0s2 Mount point: Not Mounted Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:38 MacBook-Pro.local OSInstaller[422]: Checking Journaled HFS Plus volume.
Feb 28 23:22:38 MacBook-Pro.local OSInstaller[422]: Checking extents overflow file.
Feb 28 23:22:38 MacBook-Pro.local OSInstaller[422]: Checking catalog file.
Feb 28 23:22:39 MacBook-Pro.local OSInstaller[422]: Checking multi-linked files.
Feb 28 23:22:39 MacBook-Pro.local OSInstaller[422]: Checking catalog hierarchy.
Feb 28 23:22:39 MacBook-Pro.local OSInstaller[422]: Checking extended attributes file.
Feb 28 23:22:41 MacBook-Pro.local OSInstaller[422]: Checking volume bitmap.
Feb 28 23:22:41 MacBook-Pro.local OSInstaller[422]: Checking volume information.
Feb 28 23:22:41 MacBook-Pro.local OSInstaller[422]: The volume Macintosh HD appears to be OK.
Feb 28 23:22:41 MacBook-Pro.local OSInstaller[422]: File system check exit code is 0.
Feb 28 23:22:41 MacBook-Pro.local OSInstaller[422]: Updating boot support partitions for the volume as required.
Feb 28 23:22:42 MacBook-Pro.local OSInstaller[422]: Evaluating 1 disks
Feb 28 23:22:42 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk0s2 Mount point: Not Mounted Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:42 MacBook-Pro.local OSInstaller[422]: Evaluating 1 disks
Feb 28 23:22:42 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk0s2 Mount point: Not Mounted Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:42 MacBook-Pro.local OSInstaller[422]: Repair completed successfully.
Feb 28 23:22:42 MacBook-Pro.local OSInstaller[422]: Evaluating 1 disks
Feb 28 23:22:42 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk0s2 Mount point: /Volumes/Macintosh HD Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:42 MacBook-Pro.local OSInstaller[422]: Macintosh HD is a valid target.
Feb 28 23:22:42 MacBook-Pro.local OSInstaller[422]: Container dmg is missing universal diagnostics. This install will continue attempting to preserve existing diagnostic software...
Feb 28 23:22:42 MacBook-Pro.local diskmanagementd[424]: DM ->T-[DMToolRecoveryPartition ensureRecoveryPartitionForVolume:]: inParams={
Bless = 1;
DIAGDMGChunkFile = "<null>";
DIAGDMGFile = "<null>";
DonorDiskUDSW = "disk0s2 Macintosh HD";
OSXDMGChunkFile = "/Volumes/Mac OS X Install DVD/BaseSystem.chunklist";
OSXDMGFile = "/Volumes/Mac OS X Install DVD/BaseSystem.dmg";
RepairDonor = 0;
VerifyImage = 0;
Feb 28 23:22:42 MacBook-Pro.local storagekitd[423]: Install recovery system operation began
Feb 28 23:22:42 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolRecoveryPartition ensureRecoveryPartitionForVolume:]: donor disk's storage system is simple so it itself will be the donor
Feb 28 23:22:42 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolRecoveryPartition ensureRecoveryPartitionForVolume:]: normalized donor: logical=0x7f9dd8628088=disk0s2=Macintosh HD=(iflvuuid=(null)) physical=0x10bb84c10=disk0s2=Macintosh HD=disk0s2 storage=(null)
Feb 28 23:22:43 MacBook-Pro.local diskmanagementd[424]: DM ->T-[DMRecoveryFileCopier setOSXImageFile:DIAGSImageFile:OSXChunkListFile:DIAGSChunkListFile:doVerifyImag es:badDIAGSIsSoftError:statusReportingDisk:]: OSXDMG=/Volumes/Mac OS X Install DVD/BaseSystem.dmg DIAGSDMG=(null) OSXChunkList=/Volumes/Mac OS X Install DVD/BaseSystem.chunklist DIAGSChunkList=(null) doVfy=0 badDIAGSok=1 statusDisk=0x7f9dd8628088=disk0s2=Macintosh HD
Feb 28 23:22:43 MacBook-Pro.local diskmanagementd[424]: DM <-T-[DMRecoveryFileCopier setOSXImageFile:DIAGSImageFile:OSXChunkListFile:DIAGSChunkListFile:doVerifyImag es:badDIAGSIsSoftError:statusReportingDisk:]: err=0
Feb 28 23:22:45 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolRecoveryPartition ensureRecoveryPartitionForVolume:]: CALC result phase 1/5 (after adding up logical file sizes in dmg + expected to create ourselves) requiredFileSpaceForRecoveryFilesULL=506288304 =Sbydiv=988844 =MiBbydiv=482 =MBbydiv=506
Feb 28 23:22:45 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolRecoveryPartition ensureRecoveryPartitionForVolume:]: CALC result phase 2/5 (converted to iomedia desired size) desiredMinRecoveryDiskIOMediaSizeULL=523065520 =Sbydiv=1021612 =MiBbydiv=498
Feb 28 23:22:45 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolRecoveryPartition ensureRecoveryPartitionForVolume:]: CALC result phase 3/5 (after adding BootRoot iomedia allocation) desiredMinRecoveryDiskIOMediaSizeULL=623728816 =Sbydiv=1218220 =MiBbydiv=594
Feb 28 23:22:45 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolRecoveryPartition ensureRecoveryPartitionForVolume:]: CALC result phase 4/5 (after applying minimum) desiredMinRecoveryDiskIOMediaSizeULL=650000000 =Sbydiv=1269531 =MiBbydiv=619 =MBbydiv=650
Feb 28 23:22:45 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolRecoveryPartition ensureRecoveryPartitionForVolume:]: checking against recovery partition limit MAXimum
Feb 28 23:22:45 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolRecoveryPartition ensureRecoveryPartitionForVolume:]: CALC result phase 5/5 (after applying MAXimum) desiredMinRecoveryDiskIOMediaSizeULL=650000000 =Sbydiv=1269531 =MiBbydiv=619 =MBbydiv=650
Feb 28 23:22:45 MacBook-Pro.local diskmanagementd[424]: DM ->T-[DMToolRecoveryPartition ensureBooter:storage:phyUDS:logUDS:phyREF:logREF:copierForRecoveryFiles:hostOSX ForBootRootFiles:recBSD:percentBegin:percentEnd:]: inMinSizeB=650000000 inSTORorNOT=(null) inPhyUDS=0x10bb84c10=disk0s2=Macintosh HD inLogUDS=0x7f9dd8628088=disk0s2=Macintosh HD inPhyREF=(null) inLogREF=(null) inLogMP=/Volumes/Macintosh HD inFileCopier=0x7f9dd8647410 inPct=16..95
Feb 28 23:22:45 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolRecoveryPartition ensureBooter:storage:phyUDS:logUDS:phyREF:logREF:copierForRecoveryFiles:hostOSX ForBootRootFiles:recBSD:percentBegin:percentEnd:]: existing conditions right after PHY=disk0s2: usedOrNotSpaceB=134221312 hasBooter=0 booterPartID/disk=0/(null) booterLocB/SizeB=0/0
Feb 28 23:22:45 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolRecoveryPartition ensureBooter:storage:phyUDS:logUDS:phyREF:logREF:copierForRecoveryFiles:hostOSX ForBootRootFiles:recBSD:percentBegin:percentEnd:]: existing conditions of PHY: disk0s2 loc=S=409640=B=209735680 siz=S=976101344=B=499763888128=N=499763888128
Feb 28 23:22:45 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolRecoveryPartition ensureBooter:storage:phyUDS:logUDS:phyREF:logREF:copierForRecoveryFiles:hostOSX ForBootRootFiles:recBSD:percentBegin:percentEnd:]: existing conditions of LOG: disk0s2 (could be whole so no loc) siz=S=976101344=B=499763888128=N=499763888128
Feb 28 23:22:45 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolRecoveryPartition ensureBooter:storage:phyUDS:logUDS:phyREF:logREF:copierForRecoveryFiles:hostOSX ForBootRootFiles:recBSD:percentBegin:percentEnd:]: READY TO DO CASE: case=Create_Carve_Simple spaceDeltaB=515781120 booterDeltaB=0 (adviceIfUnable=-69886)
Feb 28 23:22:45 MacBook-Pro.local OSInstaller[422]: Evaluating 1 disks
Feb 28 23:22:45 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk17s2 Mount point: /Volumes/OS X Base System 1 Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:45 MacBook-Pro.local OSInstaller[422]: OS X Base System is a valid target.
Feb 28 23:22:45 MacBook-Pro.local storagekitd[423]: DM Message: Shrinking host partition and creating new recovery partition
Feb 28 23:22:45 MacBook-Pro.local OSInstaller[422]: Evaluating 1 disks
Feb 28 23:22:45 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk17s2 Mount point: /Volumes/OS X Base System 1 Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:45 MacBook-Pro.local OSInstaller[422]: OS X Base System is a valid target.
Feb 28 23:22:45 MacBook-Pro.local storagekitd[423]: DM Message: Verifying file system.
Feb 28 23:22:45 MacBook-Pro.local OSInstaller[422]: Evaluating 1 disks
Feb 28 23:22:45 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk0s2 Mount point: Not Mounted Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:45 MacBook-Pro.local storagekitd[423]: DM Message: Checking Journaled HFS Plus volume.
Feb 28 23:22:45 MacBook-Pro.local storagekitd[423]: DM Message: Checking extents overflow file.
Feb 28 23:22:46 MacBook-Pro.local storagekitd[423]: DM Message: Checking catalog file.
Feb 28 23:22:47 MacBook-Pro.local storagekitd[423]: DM Message: Checking multi-linked files.
Feb 28 23:22:47 MacBook-Pro.local storagekitd[423]: DM Message: Checking catalog hierarchy.
Feb 28 23:22:47 MacBook-Pro.local storagekitd[423]: DM Message: Checking extended attributes file.
Feb 28 23:22:48 MacBook-Pro.local OSInstaller[422]: Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Feb 28 23:22:49 MacBook-Pro.local storagekitd[423]: DM Message: Checking volume bitmap.
Feb 28 23:22:49 MacBook-Pro.local storagekitd[423]: DM Message: Checking volume information.
Feb 28 23:22:49 MacBook-Pro.local storagekitd[423]: DM Message: The volume Macintosh HD appears to be OK.
Feb 28 23:22:49 MacBook-Pro.local storagekitd[423]: DM Message: File system check exit code is 0.
Feb 28 23:22:49 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolRecoveryPartition ensureBooter:storage:phyUDS:logUDS:phyREF:logREF:copierForRecoveryFiles:hostOSX ForBootRootFiles:recBSD:percentBegin:percentEnd:]: done fsck of donor slice; err=0
Feb 28 23:22:49 MacBook-Pro.local storagekitd[423]: DM Message: Shrinking target volume from 499763888128 to 499248103424 bytes
Feb 28 23:22:49 MacBook-Pro.local storagekitd[423]: DM Message: Shrinking file system
Feb 28 23:22:49 MacBook-Pro.local OSInstaller[422]: Evaluating 1 disks
Feb 28 23:22:49 MacBook-Pro.local OSInstaller[422]: Evaluating SKDisk { BSD Name: disk0s2 Mount point: /Volumes/Macintosh HD Role: kSKDiskRoleLegacyMacData Type: kSKDiskTypeHFS }
Feb 28 23:22:49 MacBook-Pro.local OSInstaller[422]: Macintosh HD is a valid target.
Feb 28 23:22:50 MacBook-Pro.local storagekitd[423]: DM Message: Shrinking partition and creating new recovery partition
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ->T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: inSliceDisk=0x10bb84c10=disk0s2=Macintosh HD inPct=26..34 inNewSize=499248103424(B)=975093952(S) inMode=AddRecoveryEntryDuringTargetShrinkOrNoChange inOptionSize=0(B)=0(S) inNewEntriesRequested=(null) inFormatNewEntries=0 inLMBROption=(null) inDelegate=(null)
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: ensured valid mode
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: ensured not (newSize=0=GrowToFit specified together with a special mode)
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: ensured not (AddRecoveryEntry mode plus triples specified)
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: ensured target is slice; ensured scheme is GPT; parent wholeDiskBSD/UDS=disk0
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: oldsize = 499763888128 B = 976101344 S
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: newsize = 499248103424 B = 975093952 S
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: ensured not (size delta indicates grow yet shrink-specific modes are asked for)
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: ensured not (size delta indicates shrink yet a grow-specific mode was asked for)
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: targetPartID=2
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: targetHasBooterAtPartID=(nil if no booter)=(null) size=(null) name=(null)
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: doing DARegisterDiskPeekCallback to avoid DA dialogs
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: bef MKMediaCreateWithPath dev=/dev/rdisk0 opts={
"Shared Writer" = 1;
Writable = 1;
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: aft MKMediaCreateWithPath err=0
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: blocksize=512 kMINALIGNMENT=4096 kSECTORSIZE=512=512 alignment=8
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: bef MKCFReadMedia device=<MKMediaRef>: /dev/rdisk0=0x7f9dd872ae20 opts={
"Include all" = 1;
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: aft MKCFReadMedia err=0 media={
Schemes = (
ID = GPT;
Name = "GPT Partition Scheme";
Sections = (
GUID = "DA87B1AB-F8D9-4ABD-A4CA-D646E4FAAF2B";
ID = MAP;
"Media Block Count" = 976773101;
"Media Offset" = 34;
Offset = 34;
Overhead = 67;
Partitions = (
GUID = "EC406B92-0EF6-49AB-ADC1-54AECE72EEF8";
Name = "EFI System Partition";
Offset = 40;
"Partition ID" = 1;
Size = 409600;
Type = EFI;
GUID = "C2086264-DFEA-45EF-AC75-4D8DD191B145";
Name = "500GB Apple HDD";
Offset = 409640;
"Partition ID" = 2;
Size = 976101344;
Type = "Apple_HFS";
Revision = 65536;
"_Reference" = <203e65d8 9d7f0000>;
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: making DEL/ADD lists: RP mode: DEL+=none; ADD+=recovery
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: booterReqB roundup for UAM: rounded-512 up by 0 ; now booterReqB=0
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: booterReqB roundup for ALIGN: rounded-4096 up by 0 ; now booterReqB=0
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: done making DEL/ADD lists: DEL=(
) ADD=(
IOContent = "Apple_Boot";
Name = "Recovery HD";
Size = 0;
) ADDOPTS=(
"Direct Mode" = 1;
"Retain existing content" = 0;
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: bef doomPartitionsByPartID oldEntriesToDelArr=(
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: aft doomPartitionsByPartID err=0
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: bef MKCFUpdateMedia() (del) media={
Schemes = (
ID = GPT;
Name = "GPT Partition Scheme";
Sections = (
GUID = "DA87B1AB-F8D9-4ABD-A4CA-D646E4FAAF2B";
ID = MAP;
"Media Block Count" = 976773101;
"Media Offset" = 34;
Offset = 34;
Overhead = 67;
Partitions = (
GUID = "EC406B92-0EF6-49AB-ADC1-54AECE72EEF8";
Name = "EFI System Partition";
Offset = 40;
"Partition ID" = 1;
Size = 409600;
Type = EFI;
GUID = "C2086264-DFEA-45EF-AC75-4D8DD191B145";
Name = "500GB Apple HDD";
Offset = 409640;
"Partition ID" = 2;
Size = 976101344;
Type = "Apple_HFS";
Revision = 65536;
"_Reference" = <203e65d8 9d7f0000>;
} lib=CFBundle 0x7f9dd872a020 </System/Library/PrivateFrameworks/MediaKit.framework/Loaders/MKDrivers.bundle> (not loaded) align=8 opts={
"Flexible Allocation" = 1;
"Generate Freespace Records" = 1;
"Legacy Mode" = 0;
"UEFI Mode" = 0;
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: aft MKCFUpdateMedia() (del) err=0 media={
Schemes = (
Alignment = 8;
ID = GPT;
Name = "GPT Partition Scheme";
Sections = (
GUID = "DA87B1AB-F8D9-4ABD-A4CA-D646E4FAAF2B";
ID = MAP;
"Media Block Count" = 976773101;
"Media Offset" = 34;
Offset = 34;
Overhead = 67;
Partitions = (
GUID = "EC406B92-0EF6-49AB-ADC1-54AECE72EEF8";
Name = "EFI System Partition";
Offset = 40;
"Partition ID" = 1;
Size = 409600;
Type = EFI;
GUID = "C2086264-DFEA-45EF-AC75-4D8DD191B145";
Name = "500GB Apple HDD";
Offset = 409640;
"Partition ID" = 2;
Size = 976101344;
Type = "Apple_HFS";
Revision = 65536;
"_Reference" = <203e65d8 9d7f0000>;
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: bef adjustPartitionsAtPartID2 newEntriesToAddArr=(
IOContent = "Apple_Boot";
Name = "Recovery HD";
Size = 0;
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: aft adjustPartitionsAtPartID2 err=0 updatedMediaDict={
Schemes = (
Alignment = 8;
ID = GPT;
Name = "GPT Partition Scheme";
Sections = (
GUID = "DA87B1AB-F8D9-4ABD-A4CA-D646E4FAAF2B";
ID = MAP;
"Media Block Count" = 976773101;
"Media Offset" = 34;
Offset = 34;
Overhead = 67;
Partitions = (
GUID = "EC406B92-0EF6-49AB-ADC1-54AECE72EEF8";
Name = "EFI System Partition";
Offset = 40;
"Partition ID" = 1;
Size = 409600;
Type = EFI;
GUID = "C2086264-DFEA-45EF-AC75-4D8DD191B145";
Name = "500GB Apple HDD";
Offset = 409640;
Options = {
"Direct Mode" = 1;
"Retain existing content" = 1;
"Partition ID" = 2;
Size = 975093952;
Type = "Apple_HFS";
GUID = "E1800932-F5B9-4FCF-8386-0F2D73FA75C1";
Name = "Recovery HD";
OFeb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: bef MKCFUpdateMedia() (changesize+add) media={
Schemes = (
Alignment = 8;
ID = GPT;
Name = "GPT Partition Scheme";
Sections = (
GUID = "DA87B1AB-F8D9-4ABD-A4CA-D646E4FAAF2B";
ID = MAP;
"Media Block Count" = 976773101;
"Media Offset" = 34;
Offset = 34;
Overhead = 67;
Partitions = (
GUID = "EC406B92-0EF6-49AB-ADC1-54AECE72EEF8";
Name = "EFI System Partition";
Offset = 40;
"Partition ID" = 1;
Size = 409600;
Type = EFI;
GUID = "C2086264-DFEA-45EF-AC75-4D8DD191B145";
Name = "500GB Apple HDD";
Offset = 409640;
Options = {
"Direct Mode" = 1;
"Retain existing content" = 1;
"Partition ID" = 2;
Size = 975093952;
Type = "Apple_HFS";
GUID = "E1800932-F5B9-4FCF-8386-0F2D73FA75C1";
Name = "Recovery HD";
Offset = Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: aft MKCFUpdateMedia() (changesize+add) err=0 media={
Schemes = (
Alignment = 8;
ID = GPT;
Name = "GPT Partition Scheme";
Sections = (
GUID = "DA87B1AB-F8D9-4ABD-A4CA-D646E4FAAF2B";
ID = MAP;
"Media Block Count" = 976773101;
"Media Offset" = 34;
Offset = 34;
Overhead = 67;
Partitions = (
GUID = "EC406B92-0EF6-49AB-ADC1-54AECE72EEF8";
Name = "EFI System Partition";
Offset = 40;
"Partition ID" = 1;
Size = 409600;
Type = EFI;
GUID = "C2086264-DFEA-45EF-AC75-4D8DD191B145";
Name = "500GB Apple HDD";
Offset = 409640;
Options = {
"Direct Mode" = 1;
"Retain existing content" = 1;
"Partition ID" = 2;
Size = 975093952;
Type = "Apple_HFS";
Flags = 9;
GUID = "E1800932-F5B9-4FCF-8386-0F2D73FA75C1";
Name = "RecoveFeb 28 23:22:50 MacBook-Pro.local storagekitd[423]: DM Message: Modifying partition map
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: bef MKCFWriteMedia() media={
Schemes = (
Alignment = 8;
ID = GPT;
Name = "GPT Partition Scheme";
Sections = (
GUID = "DA87B1AB-F8D9-4ABD-A4CA-D646E4FAAF2B";
ID = MAP;
"Media Block Count" = 976773101;
"Media Offset" = 34;
Offset = 34;
Overhead = 67;
Partitions = (
GUID = "EC406B92-0EF6-49AB-ADC1-54AECE72EEF8";
Name = "EFI System Partition";
Offset = 40;
"Partition ID" = 1;
Size = 409600;
Type = EFI;
GUID = "C2086264-DFEA-45EF-AC75-4D8DD191B145";
Name = "500GB Apple HDD";
Offset = 409640;
Options = {
"Direct Mode" = 1;
"Retain existing content" = 1;
"Partition ID" = 2;
Size = 975093952;
Type = "Apple_HFS";
Flags = 9;
GUID = "E1800932-F5B9-4FCF-8386-0F2D73FA75C1";
Name = "Recovery HD";
Feb 28 23:22:50 MacBook-Pro.local diskmanagementd[424]: DM ..T-[DMToolPartitionDisk editMapAtPartition:newSize:mode:optionSize:newEntriesRequested:formatNewEntries :newEntriesCreated:lmbrOption:percentBegin:percentEnd:partitionDataDelegate:]: aft MKCFWriteMedia() err=0 mediaDict={
Schemes = (
Alignment = 8;
ID = GPT;
Name = "GPT Partition Scheme";
Sections = (
GUID = "DA87B1AB-F8D9-4ABD-A4CA-D646E4FAAF2B";
ID = MAP;
"Media Block Count" = 976773101;
"Media Offset" = 34;
Offset = 34;
Overhead = 67;
Partitions = (
GUID = "EC406B92-0EF6-49AB-ADC1-54AECE72EEF8";
Name = "EFI System Partition";
Nadmace please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for information on how to resolve the download error.
Maybe you are looking for
-
How to populate PO Open Interface table to create encumbrances?
We want to bring in our POs from an external system, and we want them in an "approved" status. Is there any way to bring in the data, and "batch approve" them, and do the funds checking/encumbrance piece as well? There are some fields in the interfac
-
Restart to factory settings HELP!
So I want to restart my macbook pro early 2011 back to original factory setting i have the snow leopard disk but when i click on it to install it says i cant because i installed Lion on it. the part i need help in is that i purchased Lion from the ap
-
How can I edit photos on iPad 1? Rotate photos, crop photos. Used to work before OS5 update.
How can I edit photos on iPad 1? I want to rotate photos, crop them, etc. Is there a specific mode that I have to be in to edit? I believe it used to work before I "upgraded" to ios5. Would like any help here. Thanks
-
Hi All, I am trying to use replace to replace a string with some tags as shown below: replace('ADAFETG3B-D0LA,ADAFETG3B-D0WA ', ',' , '</PartName><PartName>') but in the output it replaces the < with '<semicolon' and > with '>semicolon' Is there
-
Inspection lot sample size is always = 1
All, I have an scenario I've seen in here but with no correct answer. Here is the case: (1) material has Buom = LK (link), production uom = M, unit of issue = M (2) the Unit of Measure table in the additional Data area is : 1 LK LINK <=> 1 LK LINK 3,