Communicating over a home network

Is there a command similar to Windows' 'net send' where I can send a message from my macbook to the desktop PC?

Our "smart" friends over at MacOSXHints.com have the answer:
Click Here
Be sure to read the follow up discussion points, its not without its caveats.
Greg

Similar Messages

  • HT3819 Hi there. If I use "home sharing" on the same wifi network, does it use internet data, or only sharing over a home network?

    Hi there. If I use itunes over home sharing in my house on 2 pc's, does it use data from my internet, or does it work over local home network?

    You'd need both computers to be connecting to the same wifi network in order to Home Share.

  • Having trouble printing over a home network to a Canon S9000 from iMac

    Hello there,
    I recently bought a iMac and am having trouble printing to my Canon S9000 over my home network. If I hook up the printer to the iMac I can print to it, but the PC that is also hooked up to the network can't. If the printer is hooked up to the PC, the PC can print to it, but the iMac can not.
    I downloaded the S9000 driver from Canon and installed it on the iMac. Then brought up the printer in system preferences. I found my printer OK, but I can't seem to find the S9000 driver in the list.
    When the printer is hooked up to the PC and I try to print to it from the iMac this is the error I get: "Error Number : 311 Printer is in use or an error has occurred. If an error has occurred, eliminate the cause of the error."
    Any help is greatly appreciated!
    Thanks!

    Your problem is due to the way that Canon wrote the drivers for that printer. It can be shared to Windows machines if it is on a Windows machine, or to Macs if it is on a Mac. It can't be shared cross-platform. It is not supported by GutenPrint, so there is no CUPS system driver available; if there was, you could put it on the Windows machine and share it, and use the CUPS driver to print on your Mac.
    I'm sorry, but that printer will not ever be able to be shared cross-platform unless and until Canon rewrites the drivers. I'd not recommend holding your breath while waiting.
    The best solution to cross-platform printing is to get a network printer. Many vendors, including Brother, Canon, Epson, and HP, make them, some of them at fairly low (under $100) prices.

  • I am considering the purchase of an iMac or macbook and want to know whether I can import my iTunes library of  400 albums from my Windows PC over my Home Network?  300 of these albums have been imported from CD's, so would not want to have to do that aga

    I am considering the purchase of an iMac or Macbook and want to know whether I can import my iTunes library of  +400 albums from my Windows PC over my Home Network?  300 of these albums have been imported from CD's, so would not want to have to do that again.

    Just copy the entire /Musci/iTunes/ folder from old computer to /Music/ on new computer.
    The libraries will be identical (date added, ratings, artwork, etc.).
    You can do this easily over the network.

  • Running ISQL Plus over a home network

    I have a small wireless home network (3 machines), and installed Oracle 10g on one machine. ISQL works fine on this machine. However, I would like to be able to run queries from the other machines using ISQL PLUS.
    Have tried, //<<machinename>>:5560/isqlplus, but this returns a message that the requested page cannot be found.
    I’ve pinged the database host machine from a second machine: ping <<machine name>>, and got a reply but when I pinged the port on the host machine: Ping <<machine name>>:5560, I got no reply. How do I solve communication with this port.
    Any assistance appreciated.
    JH

    Ping <>:5560, I got no reply.Pinging port is not possible. Btw you can't use somthing what is using ICMP protocol (ping) for testing of TCP connection. So use the telnet command for testing of connection.
    P.S: Wrong forum (section) for this type of problem.

  • Can i use my deskjet 3740 with my hp touchpad over my home network

    Trying to access my home printer with my touchpad connected to my home network with printer sharing enabled !! Is this possible  using eprint or any other possibilities?
    TouchPad access to shared internet connection over network no problem.
    deskjet 3740
    Windows xp
    hp touchpad
    Thanks for any advice.

    Hello motor8448,
    The printer you have does not support ePrint or Airprint features. To print from your touchpad you will have to use alternate cloud printing options such as Google Cloud Print. More information on how to use this setup can be found at:
    http://support.google.com/cloudprint/bin/answer.py?hl=en&answer=1686197
    Hope this helps.
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • Sharing files over a home network...

    I have a 2 year old iMac sitting in my basement.. I use it, and it is currently home to a ton of photos, videos and sound files (Logic as well as itunes). This week I plan on getting a Macbook to tootle with on the main floor (the basement is cold. ;))
    I would love to be able to share files (and back them up as well.. kinda a nother issue).
    As it stands right now, I have a 250 GB external drive which is backing up the iMac (but has hit it's limit).. need more space.
    in addition I have a D-Link DLR 655... great little router. I believe it has Network capability in that I think through something called SharePort it can help you share files across a network.. no idea how.
    So, yeah, that's about it.. anyone have any good tips in terms of building out a comprehensive backup system in conjunction with a file sharing capability across two macs (and maybe even a PC or two) across my home network?
    Finally, how would that even work.. let's say I have an image on the imac, when I open it on the macbook, would I see it in iPhoto?
    Lotsa questions.. thank you so much.
    Jay.

    Hi
    Its not that obvious from the supplied information if you're talking about OSX Server? Perhaps your question might get more attention if you posted here:
    http://discussions.apple.com/category.jspa?categoryID=235
    Which is the main Leopard Forum. You could also look here:
    http://discussions.apple.com/forum.jspa?forumID=599
    Click 'more options' in the Search field, select All, Last Year and key in 'networking'. Should reveal something? This article might help:
    http://support.apple.com/kb/HT1433
    What you're asking is simple enough. Connect all of your nodes (network devices; eg: macs, pcs, printers etc) to a switch or router or combination of the two. Depends on how many nodes you have. Wired (Ethernet) or Wireless will do. Make sure the router is providing IP addresses. Basically is its built-in DHCP Service switched on? By default most of them are. Once that's done and you've verified they can all access the internet, enable File Sharing. System Preferences > Sharing for the Macs and for the PCs right click the 'C' drive > Properties > Sharing.
    Backup is a vast subject and its difficult to be concise. A lot depends on your skill set, means, budget and location. You could search this and the XServe/XServe RAID Forums as it has been discussed many times. A basic principle is to make sure you can effectively restore what you backup. Most people forget this when implementing an effective backup strategy. To start you off purchase a large enough external hard drive. Connect to all your macs and simply drag/drop what you want. If you have Leopard use Time Machine. For the PCs use something appropriate. Photos & Music can be transferred from mac to mac by simply enabling the options in the applications themselves. ITunes > Preferences > Sharing: Look for Shared Libraries; Share this Library. When you launch iPhoto hold down the option key. It's fairly obvious after that.
    If you double-click on an image presented in the Finder (shared) on one mac then your mac will use whatever application it can find that it thinks can handle the file. For image files that could be Preview or Quicktime or if you have it installed an image editing application such as Photoshop. You can even define which application handles which type of file by control-clicking on the file itself and selecting 'Open With'. This is fairly basic 'how to use your mac' stuff which you should know?
    Tony

  • How to install LaserJetP1006 over the home network

    Hello,
    I have the P1006 installed on a Windows XP desktop.
    I am trying to print from a Windows 8.1 (64bit) laptop , which is connected to the XP desktop via a standard home network/router..
    Windows 8.1 is unable to find the driver to install.
    On the HP website, there is only an exe file which does not allow Windows 8.1 to extract the actual driver file.
    Where can I download the actual driver file(s) and do a manual installation of this printer on the Windows 8.1 laptop.
    Thanks for your help.

    Information was found on the HP web site here.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4157&lc=en&cc=us&dlc=en&sw_lang=&product=3435...
    Pick your OS.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • How do I add contacts Automaticaly to Mozilla over a home network ?

    How do I Add\Edit contacts, Automatically to Mozilla installed on more than 1 home network computers
    i.e. without doing it manually

    you don't, on your network you run an [http://en.wikipedia.org/wiki/List_of_LDAP_software ldap ]server and use ldap address books in Thunderbird.,

  • Syncing over a home network addresses in Addressbook

    I've had a lot of trouble setting up iSync to work with .Mac in Tiger, so I'd rather use a home network to synchronizes addresses in Apple's addressbook between machines sharing the same home network. How would I set that up?
    I want to be able to preserve the group vCards which have already been established on the addressbooks of three machines, and use just one machine to have all the addresses. But the first step is to get the addresses and vCards which are in common between the three machines centralized on one.
    Thank you.

    If users are only permitted to log in as "guest" then they will have restricted permissions - generally read-only. If you want the users to have broader priveleges then one way is to create a new account on the computer that will be the server. Assign that account a username and password and set up the degree of access you want to provide. When others on the LAN log into the server have them use the account username and password. That way they will have the privileges assigned to that account.
    Another way is to download and install Sharepoints (www.versiontracker.com) and use it to set up sharing and assign user access and privileges.

  • Can I share my Aperture Library over my home network?

    I am currently sharing my Aperture Library with my Apple TV via Home Sharing.  Can I also share it with a separate instance of Aperture running on a different mac on the same network (similar to how iPhoto has the built in library sharing feature)?

    "Sharing" has different meanings:
    iPhoto Libraries have a feature that allow you to share your library to other iPhoto installations on the same network
    The iPhoto feature you are talking about does not share the library to be used and edited by several users, it allows other user to read the images in the shared library. This is save, since other users cannot modify the shared library.
    When you asked about sharing a library, I thought you meant the same Aperture library to be used from two different users - to be edited and modified.
    But you are right, Aperture does not support to share the Library across the network. To share your Aperture library this way you will have to open it in iPhoto and to share it as an iPhoto Library.
    Regards
    Léonie

  • Question over extending home network

    Quick question please: I use a Time Capsule connected to a BT Home hub 3 for wifi at home. Works generally fine though patchy signal downstairs - question is, if I want to extend coverage indoors as currently some poor signal areas, would using Airport Extreme in addition to the time capsule be my best bet? It is not practical to run an ethernet cable so am I am right that I would site the Airport extreme in area of good signal downstairs and that should boost downstairs signal?
    Thanks
    Andy

    Either an AirPort Express or AirPort Extreme could be used to extend the wireless network provided by the Time Capsule.
    The only real advantage to using the AirPort Extreme would be that you can connect a hard drive to its USB port. The USB port on the Express will only support a compatible printer.
    so am I am right that I would site the Airport extreme in area of good signal downstairs and that should boost downstairs signal?
    Correct. The general rule of thumb would be that an extending device should be located approximately 1/2 to 2/3 the distance from the Time Capsule to the general area that will need more wireless coverage.
    Depending on walls, ceilings, or other obstructions, you may need to experiment with the placement of the extending device for best results.

  • I am unable to share files satisfactorily over my home network between Mac and Windows

    Please advise.
    I have an iMac with a LaCie Thunderbolt external hard drive and a Windows 7 laptop connected via ethernet network to a Belkin router with a WD MyBook Live Duo attached to it via USB.   The iMac also has a virtual PC in it using VMWare.
    I have never been able to get file sharing to work satisfactorily across the network.
    From the iMac, which is now running Yosemite, I can access the laptop and the external hard drive fine, but connections to the WD network drive are very slow and unreliable.
    From the laptop, I can access the iMac and the WD network drive OK but while the LaCie share formatted for windows is visible, I am unable to open the individual files. 
    I was advised that I need a server.  I have therefore bought and installed OS X Server on my Mac but I don't understand it and have absolutely no idea what to do to make it work.  I open the LaCie share for example and cannot change anything - I get the message " 'Ignore ownership on this volume' is turned on for the volume containing the Share Point.  All permissions will be ignored.  This can be turned off in the 'Get info' window in the Finder."  Except it can't, because there is no such option in that window.
    I can find no help  anywhere for this.  Please tell me how I set my network up so that files can be shared freely across it.

    Poor show Apple
    Apple personnel aren't here.  We're all just users like yourself and apparently there's no one here who's seen your post and can offer a solution.

  • Printing to a Windows printer over a home network

    Help please ! I have a Canon Pixma iX4000 attached to a Windows 7 64-bit laptop. I want to print from my Apple iMac running Snow Leopard OSX 10.6. I have tried Samba, LPD and variants of printer definitions e.g. smb://servername/printer name,. Also tried URL of the server instead of the server name all to no avail. I can access the server hard disk but not the printer. Is the problem the 64-bit O/S o nthe Windows machine and if so any thoughts on how to get round this prolem? I use Prefernces to add a printer so presumably need to add the 64-bit Mac driver at this time. Where should I install it?

    As Greg has mentioned, the Canon driver on the Mac cannot be used to print via a Windows share. Normally Gutenprint would be the best option as it is free. However the iX4000 is not listed as a supported model and you could spend a long time finding another model of Canon - Gutenprint driver that does work correctly with the iX4000. So your best option is to use [PrintFab|http://www.printfab.net>, which does list the iX4000 as a supported model. Note that PrintFab does cost €49 but there is a 30 day trial so at least you can make sure you are happy with it first.
    Also, the Windows 7 PC being 64bit has nothing to do with the problem. If you were using a 32bit PC then you would have to install the 32bit driver to the Windows 7 PC. This is known as a Point & Print connection which uses the RPC protocol. The Mac connects to Windows via SMB and thus the Windows queue is simply a path to the printer. Windows doesn't interact with the spool file.

  • Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network

    Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
    My Mac runs lion and the windows desktop runs Windows XP
    I have tried for a few hours or so to connect my mac to this printer over a home network.
    For your information it does work when connected directly to my mac using a USB Cable.
    If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926

    In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.

Maybe you are looking for