Communication between AS2 Template and AS3 Swf

I created a template in AS2 which loads as2 swf's. i want to load as3 swf. then how can load as3 swf.within as2 template.
please help me to find out this...

hI,
Look at package SDYNAMICDOCUMENTS, or look for DD_* ( This is Dynamic Documents Tamplates ) in SE38.
Regards,
Marcelo Ramos.

Similar Messages

I have problems in communication between my notebook and Epson printer. It goes offline everytime I unplug it from the notebook and there is no way how to switch it on. Although the printer is recognized and scanning is not a problem. Any solution?

I have problems in communication between my notebook and Epson printer. It goes offline everytime I unplug it from the notebook and there is no way how to switch it on. Although the printer is recognized and scanning is not a problem. Any solution?

this is exactly the kind of response i expected, almost begged support to please not do this to me and yet there it is another meaningless, non helpful, standard template response to restart my apple tv.
this does NOT work which is why i am contacting you. i have tried all suggestions about unplugging and restarting and nothing works.
i live in an apartment and logon to the provided wifi wireless. so i do not have access to a router. however, management says they have talked with their provider and have been assured that the required ports are available.
remember all the jokes about how bad windows was because the solution was always to re boot. funny huh? how is apple any different.
i have been to the local apple care store and they are clueless, too.
should we just end it here and you admit that i will not be getting any support from apple on this one? i got the ipad because my kids were such big fans. it is difficult for me to share their enthusiasm.
at this point i am just curious about how you say you cannot support your own product so i can complete my file on this contact.
thanks...sorry it was you who got this problem..

What is difference between Site template and web template

What is difference between Site template and web template

Both are almost same, are you referring to Site Definitions vs web template?, if so, refer to the following post
http://blogs.msdn.com/b/vesku/archive/2011/07/22/site-definitions-vs-web-templates.aspx.
--Cheers

Communication between HP eprint and Google Cloud Print

Hi,
the communication between HP eprint and Google Cloud Print seems to be broken. At least for me.
The documents do get printed when I print vio Chrome browser or Cloud Print dashboard -- but the status in cloud print remains as "submitted". It seems like somehow the HP eprint status doen't get reported back to cloud print. In HP eprintcenter the log says "printed".
Well, I wonder who will take care of this problem ... (Hope it will not result in fingerpointing only ...)
Thanks for your support!
Best,
George
This question was solved.
View Solution.

Are you able to log back in later and the status at Google Cloud print update to reflect the true outcome of the print job? Or does it just remain as "submitted". Otherwise, if it is printing and showing in the log at ePrint Center (EPC) as printed, the issue would not be on the ePrint side but on Google's
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Communication between a driver and application.

Communication between a driver and application.
I am writing a driver for a PCI card. I have found very good examples of how the driver should be build.
Where do I find the information about how the user mode application should be talking the driver.
So If you have any idea that will help me, please let me know.

Hi,Sir
This for your reference.
It will create pci adapter device node at /devices .
You can use AP function call ioctl to Communicate with your device driver.
static int
xxattach(dev_info_t *dip, ddi_attach_cmd_t cmd)
int instance = ddi_get_instance(dip);
switch (cmd) {
case DDI_ATTACH:
allocate a state structure and initialize it.
map the device�s registers.
add the device driver�s interrupt handler(s).
initialize any mutexes and condition variables.
create power manageable components.
* Create the device�s minor node. Note that the node_type
* argument is set to DDI_NT_TAPE.
if (ddi_create_minor_node(dip, "minor_name", S_IFCHR,
instance, DDI_NT_TAPE, 0) == DDI_FAILURE) {
free resources allocated so far.
/* Remove any previously allocated minor nodes */
ddi_remove_minor_node(dip, NULL);
return (DDI_FAILURE);
* Create driver properties like "Size." Use "Size"
* instead of "size" to ensure the property works
* for large bytecounts.
xsp->Size = size of device in bytes;
maj_number = ddi_driver_major(dip);
if (ddi_prop_update_int64(makedevice(maj_number, instance),
dip, "Size", xsp->Size) != DDI_PROP_SUCCESS) {
cmn_err(CE_CONT, "%s: cannot create Size property\n",
ddi_get_name(dip));
free resources allocated so far
return (DDI_FAILURE);

Communication between the computer and the disc drive failed

The disc can’t be burned because because communication between the computer and the disc drive failed (error code 0x80020022). This computer has been out of the box for less than a month and this has been a growing problem.

My problem was FIXED at the apple store..... there was something wrong in the system preferences and the genius deleted something that recreated it's self. Surely enough we we're able to burn a 600 mb dmg of nothing onto a few test disks. For anyone having this issue...it's NOT The media, it's some configuration issue within the computer's preferences. I'm telling you all to take your machine to the nearest apple store and have them fix it, if your machine is still under warranty the fix is free. There was no hardware issue, so the optical drive was not replaced.

Communication between non SAP and SAP

HI,
do you have some information about communication between non SAP and ERP (WebAs) SAP System ?
I would like to receive an xml file or xml IDoc from a Java Plattform (non SAP) into our SAP ERP System as an own defined IDoc.
remember: we don´t have a converter like XI.
What about using a proxy (do you have some information/blog how to use that) ?
What about using a webservice (do you have some information/blog how to use that) ?
What about storing the xml on the application server (do you have some information/blog how to use that) ?
How to transform xml to IDoc ?
other methods ?
Thanks for your help.
Gordon

Here is a link to connecting MS SQL Server with SAP using Open Hub connection.
http://msdn.microsoft.com/en-us/library/dd299430(SQL.100).aspx
This might give you some insight into connecting with Non SAP Systems.
I have used the information from this link to export data from SAP to MS SQL Server.
Good Luck.
MP.

Error 2032 in communication between Flex Client and WCF

Hi All,
I'm trying to establish communication between Flex Client
and WCF service.
WCF service accepts gZip compressed data and returns gZip
compressed results.
So I used Flex ByteArray.compress() and
ByteArray.uncompress() for this purpose. However, it throws error
2032.
The gZip compression/decompression uses MemoryStream class in
C#. Based on my previous experience, memory stream communication
between Flex and C# gives erro 2032.
Is there a work around for this?
Thanks,
Vishal

I read some thread in the forum, and found somebody had the similar problem with me. Just want to know how to settle this problem.
In the client/server program. Client is a JAVA program and Server a
VC++ program. The connection works, and the problem appears after some time. The Client sends a lots of requests to Serverm, the server seems receive nothing. But at the same time, the server is able to send messages to Client. The Client also can get the messages and handle them. Don't understand why there this problem and why it appears when it wants.
The client is a Win2k platorm with JDK1.3.1 and the server is also a Win2K platform with VC++ 6.0.
In the Client, using:
inputFromServer = new BufferedReader(new InputStreamReader(socket.getInputStream()));
outputToServer = new PrintWriter(new BufferedWriter(new OutputStreamWriter(socket.getOutputStream())),true);
Hope can get your help.

I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

Reset the SMC, as per > Resetting the System Management Controller (SMC)
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
Then zap the PRAM/NVRAM as per > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.
Then retry the Disc Drive.

What is the difference between VI Template and vi that is reenterant?

What is the difference between VI Template and vi that is reenterant?
From what little info I can find about them, they seem to basically do the same thing....
What are the difference?
What are the pros and cons of each?
Thanks alot for the help.....

Tarek316 wrote:
I inherited an app that uses .vit for the purpose of having multipe separate instances.
Thanks,
OK, here's what happens when you call a VI Template using Call by Reference or using Invoke and Property Nodes.
Since the VI you are calling is a template, LabVIEW creates a new instance of that VI by creating a copy of it and giving a new name. Notice in the title bar of the instantiated VI the VI name is the same as the template VI plus a number. This is the same thing you see when you open a template from the "New..." menu. So if you call the template VI 3 times, you'd end up with 5 newly instantiated VIs named, "VI Name 1.vi", "VI Name 2.vi" and "VI Name 3.vi". This is how you end up with multiple instances.
Reentrancy only works on subVIs when they are used as a normal subVI in a top level application. Using Call by Reference or Invoke and Property Nodes to open and run a reentrant VI results in the VI only being opened once because LabVIEW will not automatically give it a new name. The new name is only generated when calling templates. Since LabVIEW can only a have a single instance of VI name in memory at a time, you'll not end up with multiple instances.
Not sure if I can help with the know issue on OSX. If it's specific to using the Call by Reference function, you could try calling the templates using Invoke and Property nodes.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

[svn] 4112: Further work for FXG to SWF transcoding - checking in some work resulting from collaborating with Kaushal to correct FXG transforms and gradient transforms as well as cater for differences between Java AffineTransform and the SWF Matrix type .

Revision: 4112
Author: [email protected]
Date: 2008-11-14 10:05:42 -0800 (Fri, 14 Nov 2008)
Log Message:
Further work for FXG to SWF transcoding - checking in some work resulting from collaborating with Kaushal to correct FXG transforms and gradient transforms as well as cater for differences between Java AffineTransform and the SWF Matrix type.
QE: Not yet.
Doc: No
Checkintests: Pass
Reviewer: Kaushal
Modified Paths:
flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/dom/GraphicContentNode.java
flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/dom/fills/LinearGradientFillNode.java
flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/dom/fills/RadialGradientFillNode.java
flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/dom/strokes/LinearGradientStrokeNode.j ava
flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/dom/strokes/RadialGradientStrokeNode.j ava
flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/swf/AbstractFXGGraphics.java
flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/swf/TypeHelper.java
Added Paths:
flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/dom/ScalableGradientNode.java

Diff between in Template and Reference

hai all
Any one knows the diss between diff between in Template and Reference , plse chk and upadate
rgds vinod

Hi,
My 2 cents:
You can easily customize a new infoobject created from a template.
An IO created as a reference to the other IO is not customizable at all. It has no its own properties and master data. It uses the referenced infoobject's properties and master data. It means that you cannot even load master data for this new referenced IO.
Best regards,
Eugene

As2.0 and As3.0 communicatioin

Hi,
i m updating my e-learning course player project with Flash
cs3 and AS3.0. the old version of course player was in As2.0. which
load cousre swf files .
it was working fine Flash8 As2.0.
the player load course swf. the loaded course swf on a
specifec frame call a method like this
_level0.setButton(2) method from course player;
The setButton(parameter) method defination is in new courser
player. the loaded movie which is in Actionscritp2.0 not finding
this method
in new course player which in Actionscript3.0. its working
well with the old course player.
can any one give me solution to solve the issue.
i can't make changes in course swf files b/c there are
thousand of course files

thank for your reply i have used it but it is two way
communication , as i mentioned in my question
i can't make changes in my As2.0 course swf files. b/c there
are thousand of these course files.

Communication between Best Buy and Apple

Where is the communication between these two companies? It's frustrating to have NO CLUE if a phone will come in a day or in 5 weeks. Who at Apple is deciding what they end to what stores? Obviously, Best Buy has to pay for the phones. There has to be some sort of communication.
Would it really be that hard for someone high up in Best Buy to communicate with Apple? Maybe a list from each store of their orders and what they are waiting on. Give that to Apple. Apple can give some sort of answer. Exepect this much in this time frame... expect this much later. I mean, something. Instead of leaving everyone in the dark, completely.
Someone at Best Buy corporate has to have SOME clue how Apple is shipping and to what stores. To say no one has no clue at all, is nuts. And if it's true... Best Buy needs to get a clue. DO SOME WORK FOR YOUR CUSTOMERS. At least get some truth, so if we need to go elsewhere, we can. It would be better for both sides.

Apparently since they come on UPS, they don't know when the shipments are coming in or how much. Which I think is bull.
If that's the case, what I want to know is HOW do they know they received the amount they were expecting? If they don't know how much they're getting or when they're getting a shipment, then what's stopping the delivery man from stealing a box, and they wouldn't know any better? Maybe the higher up manager's know, and they aren't allowed to reveal that info, but there has to be a checks system in there somewhere verifying the stock received.

Communication between Lab view and Controller via USB

USB communication between C8051F320 and Lab View. I try doing methods given in the NI site(http://zone.ni.com/devzone/cda/tut/p/id/4478) and atlast, it gives me error −1073807302 so if any one can answer my question please do post me the details concerned to it.

My devices show up as NI-VISA USB but I'm not sure if that makes a difference and I'm not using USB RAW either. One thing that you can run is a VISA Property node like below and see what it reports. Also, what version of VISA are you using? If you are not using 4.0, you can download it from http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C0E91?opendocument&node=1....
Message Edited by Dennis Knutson on 01-31-2007 07:29 AM
Attachments:
USB RAW Property.PNG ‏3 KB

Communication between AS2 Template and AS3 Swf

Similar Messages

Maybe you are looking for