Communication between Canon 350D software suite and OS X 10.4.3

I have recently acquired a Canon 350D SLR camera and also decided that I would upgrade to OS X 10.4.3 in order to upgrade my Iphoto to version 5.0 (only available via the bundelled Ilife05 package unfortunately).
However, now that I am on 10.4, I have found that Installation disk for Canon software (camera window, image browser etc)is no longer able to install correctly - this did not seem to be a problem when I was working with OS X 10.2.
I have advised by Canon that it could be a firewall function that could be causing the problems. Anyone out there got any ideas as to how I might get over this hurdle?
Powerbook Mac OS X (10.4.3)
Powerbook Mac OS X (10.4.3)
Powerbook Mac OS X (10.4.3)

So you are running iPhoto 5.0?
If so, do you still need the features of the canon software suite? I have used iPhoto for quite sometime with no issues. I have a canon and an Olympus.

Similar Messages

HP OfficejetPro L7780 - Problem installing HP Deskjet and Officejet Software Suite and Driver.

I was having problems with the scanner in my HP Officejet Pro L7780 All in One.
On an HP discussion board, I found that I should install the full HP Deskjet and Officejet Software Suite and Driver.
When I tried installing it, an error message popped up saying that "the application had requested the Runtime to terminate it".
I have no idea what this means. Any help/suggestions? Thanks!

Try following the document below Click on your OS, and follow as many steps as you can.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00836418&tmp_task=solveCategory&cc=ca&dlc=en&lc...
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

Communication between the DNS/DHCP Manager and OES Server

No communication between the DNS/DHCP Manager Console and OES server (status,start,stop)
The screenshot shows the tab "DHCP (OES Linux)" in the DNS / DHCP Manager console
in the bottom of the image it shows the state of the DHCP servers.
allDHCP.JPG
The dhcp service is started on all these servers
You can see that the status is known only for four servers.
The button "start/stop DHCP service" works fine on this servers and
the dhcp service can be canceled and also restarted
But the status of the "dhcp service" is not recognized for all the other DHCP servers
and so we can not start or stop dhcp service on these servers.
All servers were installed at different times (last three years) with OES11 and
are upgraded to OES11SP2 with all patches.
The server keto (DHCP_keto) is a new installation OES11SP2 few days ago.
All OES servers were set up identically from me. LDAP, LUM, DMS, DHCP works fine.
Which service on the OES server is responsible for
communication (status indicator) between the DNS/DHCP Manager and the OES serve?
How the status query is performed by the DNS/DHCP Manager?
How can I test the communication to the server on the client (console)?
Which configurationfiles I should be compare on the server?
Thanks in advance
Gernot

gernot,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Communication between EM agents/EM agent and OMS

Hi,
I am trying to explore the possibility of communication between.
1) EM agent to EM agent
2) Bi-directional Communication between OMS and EM agent
Is there a method by which EM agents can communicate with each other(For ex: sending a String from one agent to agent)
directly or through OMS. Till now, what I have explored it seems only agent to OMS communication is possible.

I am exploring the possibility to build an application roughly similar to client server architecture, using Oracle Enterprise Manager.
I intend to use OMS as the server and different host on which EM agents will be installed as clients.
I require different applications to be running on different client machines[machines having EM agent] which needs to communicate between them for ex: message passing.
OMS server also need to send message to clients, whereas client can also send some data to OMS.
Hope, the scenario is now clear.

Communication between a desktop software and a webserver

I have developed a desktop. i want this software to be a one user license software. The software is suppose to connect to a php webserver were it would obtain it access key before allowing the user to install on the system, so that not more than one user can install it. I tried using socket (making the php webserver the server socket)
and my java application the client socket application, but unfortunately i am having some problems connecting properly on the php server. This is my question, is there a better way that I could establish this without going through the socket protocol.

i am having some problems connecting properly on the php server.Some problems such as what?
This is my question, is there a better way that I could establish this without going through the socket protocol.You can't communicate with anything external in Java without using the socket protocol. You are going to have to engage with your current 'problems', disclose what they actually are, and solve them. You can get help here, but only if you ask an actual question.

Data Communication between ERecruiting 3.0 standalone and R/3 4.7

Dear All,
We have the ERecruiting setup comprising of ERec 3.0 standalone with the backend HR system 4.7. We are using ALE to communicate between the two systems.
In ERec 3.0 we have the message type HRMD_ABA with basic type HRMD_ABA04 while on the R/3 side we have HRMD_A06 available. Our data transfer requirements are satisfied by HRMD_A06 but it is not available on the ERec server. Due to this we are not able to transfer certain infotype data required like IT1007,0023,0024 etc.
We managed to transport the basic type HRMD_A06 to the ERec server and tried sending the data across for Vacancy infotype 1007. It worked but the idoc went into error. On further investigation we found the table for IT1007 does not exist on ERec neither do the required functions to push the data into HRP1007. Is this becoz the PA component does not exist on the ERec 3.0? Is the PA component mandatory to be installed under such a landscape. We have only installed following components SAP_ABA-640,SAP_BASIS-640,SAP_BW-350 and ERECRUIT-300.
We are able to transfer the OM data and see the same on Requisition tabs but not the Vacancy information due to missing table for 1007.
How do we resolve this? Do we need to get the PA component installed or is there any other solution to transfer the data for IT1007,0022,0023.
Any suggestions and help will be appreciated.
Regards,
Chetan Mane

Closed

Difference between n-layer software architecture and MVVM design pattern?

hello everyone,
I am not clear with this concepts of Software architecture pattern and design pattern.
I am developing an wpf application using MVVM. Now, my question is, does MVVM come under n-layered architecture?
or n-layer architecture and MVVM both are different?
Regards,
Rakesh.N
Rakesh murthy

"
Now my question is, i want to process the data which i get from database. where should i write that processing logic after getting the data from database? in model classes? or in view model classes?
The model is however the data comes from wherever it comes from.
If there is any processing after you get it then that would be in the viewmodel.
The viewmodel adapts your data to the view.
If it needs any adapting then the viewmodel does that, not the model.
EG here
protected async override void GetData()
ThrobberVisible = Visibility.Visible;
ObservableCollection<CustomerVM> _customers = new ObservableCollection<CustomerVM>();
var customers = await (from c in db.Customers
orderby c.CustomerName
select c).ToListAsync();
foreach (Customer cust in customers)
_customers.Add(new CustomerVM { IsNew = false, TheEntity = cust });
Customers = _customers;
RaisePropertyChanged("Customers");
ThrobberVisible = Visibility.Collapsed;
That logic is in a viewmodel.
in this context , in which layer the viewmodel and model classes are put under in n-tier architecture?
They're in two of the n layers/tiers.
Or they're in one.
Depending on how someone decides to classify a layer or a tier.
There is no absolute definition.
Why would you care?
Hope that helps.
Technet articles: Uneventful MVVM;
All my Technet Articles

Communication between ECC and CRM

Hello,
I am in phase of showing communication between SAP CRM 5.0 and ECC 6.0.
I am struggling with finding some simple transactions which are common in both, with which I can show correct connectivity between ECC and CRM.
I need to save some data from CRM and access the same via transaction within ECC, save some data via ECC and access it via CRM. I already established RFC link between ECC and CRM.
Probably communication between SD module of ECC with CRM.
Can you please help me out with this, a clue/correct direction will be of very helpful. Basically I want to know, what transaction I can use for same.
Any help is really appreciated.
Thanks
-Vishal

Hi Glenn,
I followed all steps in document mentioned above. In the end during execution of transaction I selected appropriate source and destination, when I click start transfer objects, it gets stuck in waiting phase.
Among those steps I was not able to perform step#10. Creating Subscriptions for OLTP. My ERP is not displaying this option under subscription wizard. Should it be reason for not starting transfer ? I also do not see ERP logon screen when I select transfer.
My another question is when transfer will complete, where I'll be able to see transferred objects within ERP database ?
Thanks
-Vishal

Communication between BSP and Web Dynpro JAVA

Hello All!
I'm wondering whether the communication between a web dynpro application and a BSP application is possible.
To ellaborate more, we have developped a web dynpro application acting as sender and we would like to develop a bsp application that displays a smart forms and which needs to listen to the web dynpro. We don't know exactly how to do that.
Your help is really appreciated!
Yours,
Hajar

HI
GOOD
I NEVER FACED SUCH ISSUES, HEREWITH I AM GIVING SOME LINKS, I HOPE THESE WILL HELP YOU TO SOLVE YOUR PROBLEM.
http://sapfans.com/forums/viewtopic.php?t=168023&sid=1ed91bc0423642f19dc32b70ef3d37e3
http://www.sap-press.com/downloads/sap_press_catalog_2006_summer.pdf
http://help.sap.com/saphelp_nw04s/helpdata/en/a6/10b98ae47ef14799a918db66ee9477/content.htm
THANKS
MRUTYUN

Communication between BSP and Web Dynpro

Hello All!
I'm wondering whether the communication between a web dynpro application and a BSP application is possible.
To ellaborate more, we have developped a web dynpro application acting as sender and we would like to develop a bsp application that displays a smart forms and which needs to listen to the web dynpro. We don't know exactly how to do that.
Your help is really appreciated!
Yours,
Hajar

i guess it should be possible. (is it ABAP webdynpro or java webdynpro?)
post it in WEBDYNPRO forum for quicker resposne.
Web Dynpro Java
Regards
Raja

Communication between TNS_Listener and Apex Listener

Dear all,
I how does the communication between TNS Listener, Apex Listener, and Apex? For some reason I got the following error from Apex listener:
Caused by: oracle.dbtools.rt.web.WebException: Unable to start the Universal Connection Pool: oracle.ucp.UniversalConnectionPoolException: Cannot get Connection from Datasource
Caused by: oracle.net.ns.NetException: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptorI truncated some of the Java object messages.
This occurred when I tried to connect to Apex. Then I can fix this by going to:
http://localhost:8080/apex/listenerConfigurethen, everything worked fine.
My listener.ora file:
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = firefly.snowdrop.com)(PORT = 1521))
ADR_BASE_LISTENER = /usr/local/oracle
ADR_BASE_ORACLE_LISTENER = /usr/local/oraclemy tnsnames.ora file
INARA =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = firefly.snowdrop.com)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = inara.snowdrop.com)
)where inara is the instance name and firefly is the hostname.
Does the order of whether starting TNS Listener first or starting Apex Listener first matter?
Best regards,
Val
Edited by: Valerie Debonair on Aug 1, 2011 5:47 AM

Hm, I'm not able to reproduce the error. There was one time when I started APEX Listener got:
java.net.BindException: Address already in use: 8080=com.sun.grizzly.http.SelectorThreadHandler@46d999aand when I did the netstat -a got:
root@firefly:~# netstat -apnl |grep 8080
tcp6       0      0 :::8080                 :::*                    LISTEN      4530/tnslsnr I had no idea what made 8080 tagged by the TNS listener, as I started it out before APEX Listener. Very curious how did this happen.
There was one time netstat -a showed me this (this happened after I stopped Apex Listener, stopped TNS Listener, shutdown the database, started database, started TNS Listener, and started Apex Listener):
root@firefly:~# netstat -a |grep 8080
tcp        0      0 firefly.snowdrop.:22110 firefly.snowdrop.c:8080 ESTABLISHED
tcp        0      0 firefly.snowdrop.:22111 firefly.snowdrop.c:8080 ESTABLISHED
tcp        0      0 firefly.snowdrop.:22107 firefly.snowdrop.c:8080 ESTABLISHED
tcp        0      0 firefly.snowdrop.:22109 firefly.snowdrop.c:8080 ESTABLISHED
tcp        0      0 firefly.snowdrop.:22112 firefly.snowdrop.c:8080 ESTABLISHED
tcp        0      0 firefly.snowdrop.:22108 firefly.snowdrop.c:8080 ESTABLISHED
tcp6       0      0 [::]:8080               [::]:*                  LISTEN
tcp6       0      0 firefly.snowdrop.c:8080 firefly.snowdrop.:22108 ESTABLISHED
tcp6       0      0 firefly.snowdrop.c:8080 firefly.snowdrop.:22107 ESTABLISHED
tcp6       0      0 firefly.snowdrop.c:8080 firefly.snowdrop.:22112 ESTABLISHED
tcp6       0      0 firefly.snowdrop.c:8080 firefly.snowdrop.:22109 ESTABLISHED
tcp6       0      0 firefly.snowdrop.c:8080 firefly.snowdrop.:22110 ESTABLISHED
tcp6       0      0 firefly.snowdrop.c:8080 firefly.snowdrop.:22111 ESTABLISHEDWhat are 22108, 22107, etc? I cannot reproduce this either.
Now I only got
root@firefly:~# netstat -a |grep 8080
tcp6       0      0 [::]:8080               [::]:*                  LISTEN
root@firefly:~# netstat -pnl |grep 8080
tcp6       0      0 :::8080                 :::*                    LISTEN      5035/java   which is normal, right?
Edited by: Valerie Debonair on Aug 1, 2011 9:43 PM

Communicating between C and Flex

Hi,
I am a beginner in Flex devleopment and am wondering whether
there is anyway of communicating between C/C++ libraries dll and
flex application. Basically, is there anyway of calling C function
from Flex application.
Please suggest, any pointers are highly appreciated
Thanks,
Nav

Flex applications cannot access local resources as this
violates the security sandbox. There was some open source work for
AIR to allow Air applications to access Java Libraries. Check out:
http://artemis.effectiveui.com/

HP Deskjet F4280 (Software suite only download)

Hello, I've been trying to install the driver/software package from the website but I always get this.
In the form of an error box above the isntallation whilst it's on checking system. I've found no way around this, how ever, the drivers work with plug and play but I require the software that also comes with it.
I've been unable to locate a download for JUST the software suite and not the drivers.Is anyone able to provide this?

Hello again , This is a tricky one, but I've got a few more suggestions for us. Let try running a scrubber from the HP software that you have already installed, to remove anything that may already be on your computer from previous attempts to install. Then we'll try re-installing using the HP Printer Install Wizard. First, let's restart the computer.Once it starts back up, hold down the Windows Logo key () on the keyboard and the 'R' to open the run box.Type %temp% into the run box and press Enter. The Temp folder will open.Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deletedDownload a fresh version of the software and choose to save as, save to desktop > HP Deskjet F4200/F4224 All-in-One Printer series Full Feature Software and DriverAfter the software downloads and extracts, open the temp folder again( You can use the instructions from step 1)Look for, and open the folder starting with 7z (Example: 7zS2356)Open folder UtilOpen folder CCCIf you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe, however, it will remove ALL HP software, including other printers installed.Restart the computer to complete the uninstall.Follow these steps to reset the registry settings and options for Windows Installer. Hold down the Windows Logo key on the keyboard and the 'R' to open the run boxIn the Open box, type msiexec /unregister, and then click OK.Hold down the Windows Logo key on the keyboard and the 'R' to open the run boxIn the Open box, type msiexec /regserver, and then click OK *Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows InstallerRun Disk cleanup from Accessories\ System Tool < How to Delete files using Disk CleanupDownload and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.htmlDownload the following SP40669 File Download - if this does not download and or install please proceed to the next step.Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know. Image sourceDownload and run the HP Printer Install Wizard for Windows. The Printer Install Wizard, can help bypass a lot of errors that you may receive while trying to install your printer. I highly suggest trying this if you haven't already (as recommended in my previous post) If all of this still fails to resolve the issue, I'll get you to check your Event Viewer to see if there are any errors there that pertain to the HP software that may help us. You can use these instructions to get into your Event Viewer: Open Event Viewer I look forward to hearing back from you! Fingers crossed!

Communicating between two Computer via USB

Hello,
I want to connect two PCs to synchronize two different LabView VIs running on these Computers.
The perfect way would be, that the VI on PC 1 sends boolean Value to the VI on PC 2, where this value is read out and can start some process.
My Problem is that I do not have a 'normal' network and all serial Ports (but not USB) are occupied.
I would appreciate any advice or suggestion.
One of my ideas is going in the direction of an USB to 9pin serial Adapter plus a null modem adapter/cable. But I have no Idea if this would work.

I would suggest USB-Ethernet adapters and an Ethernet cross-over
cable.
The communications between computers will be faster, and you can
use your software across a larger network later on without
modifications (just change IP addresses). Your communications will be
message based rather than character based, so you won't have to
constantly poll the RS232 port for characters.
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

What is difference between PC Suite and Ovi Suite?

What are the main differences between PC Suite and Ovi Suite and are there any advantages in using both please?

/t5/PC-and-Mac-Software/I-am-new-so-PC-Suite-or-Ovi-Suite/td-p/663858
If my post helped you, click on Kudos button and if my solution provided is opt 2 u, accpt my solution

Communication between Canon 350D software suite and OS X 10.4.3

Similar Messages

Maybe you are looking for