Communication between Java and Oracle

Hello,
I have replicated databases running 9iR2.
Once insert/update/delete transaction is commited
by replication(master site, backend server),
notification needs to be sent to front end server
(eg rowid and tran type update/delete/insert)
Upon insert/delete/update java stored procedure needs
to open a socket to frontend server and pass the
message (rowid and tran type update/delete/insert)
How can this be accomplished?
I believe this can be accomplished using Java stored
procedure. Can someone explain how?
Thanks.
Oracop

If you go up to Search, and enter "JMS", you'll get loads of documentation. http://tahiti.oracle.com will also have plenty of documentation. http://java.sun.com will also have lots of documentation and sample code.
Justin

Similar Messages

Data conversion for communication between Java and C/C++ program

The real problem, i guess, is about data type conversion between Java and C programs. For instance, and int is supposed to be 4 bytes in Java, and also in C/C++. But, as far as I know, the size of and int in C depends on the processors architecture, so if it were a 64 bit arch., size of and int, double, etc. in C, would change. The real scenario would be a communication between a 32 bit machine (Java) and a 64 bit machine (C/C++).
First of all, is this assumption correct?
If so,
how is it possible to deal with this problem in Java?
Is there any way to know 'type length' automatically? or
would it be necessary to modify the Java program to work with a C program in 32-bit or 64-bit arch?
thx in advance

cotton.m wrote:
Yes you should develop the C part of the protocol first and then build from there.
See http://forum.java.sun.com/thread.jspa?threadID=5243547 for a previous discussion of this topic.
I understand what you mean, also the topic you referenced. I will explain the situation a bit more. The protocol is already defined: (16 bits message size, 16 message id, 32 bit time, etc.); it is also defined in C (structures and so on). So it would be easy to write my Java code using the specified protocol in bytes, and C types wouldn't be necessary to be considered. But, let's say that the C code can't be modified, and I thought (and don't know yet if its correct), that size of C types CAN changed depending on architecture. So if size changes for C types (code is specified in short, int, etc, and not in bit format), it all would be a mess, if I don't implement something in my Java code.
cotton.m wrote:
I don't believe that 32 or 64 bit enters the equation here at all.Maybe 32 o 64 doesn't mind, but sparc or PC could take a point here. Communication would be between a sun solaris sparc and windows x86 PC. But if type size in C/C++ does not change, I wouldn't really have any problem then...
The situation is not ideal, I know, but is what I have; and I think I could have problems if I run the C program in other machines; so I would have to try to solve it whithin my Java Program.
I hope it is clear now what I need.
thx
Edited by: MGasa on Jan 16, 2008 1:51 AM

Communication between java and c++, help!

i am c++ programmer and newly to java.
now i am developping a client/server app. i use java transfers data (socket) between client and server, and use c++ to create user interfaces because c++ is easier for interfaces.
my question is:
in a single PC, java needs to tell c++ what info was read from socket and c++ needs to tell java what info will be written to socket.
i want to use 2 files (read and write) as media between java and c++. that is: java writes data to a file and c++ reads from the file, and vice versa.
i know it's not efficient. could you tell me better way to do?
thanks in advance.

thanks for reply.
my problem is: socket is fare in java, not fare in c++
(win/nt). could u use server in a non nt-server
machine with c++?I'm not sure what you mean "fair". NT-Server is just a version of NT that Microsoft adds their server products to. Most of which you don't want to use because they are a security nightmare. I think what your asking is can you do the equivalent of Java's ServerSocket in C++. Sure, the socket libraries in Windows (at least last time I checked) were based off the BSD socket libraries. So you would basically do something like:
// Open socket
ss=socket(AF_INET, SOCK_STREAM, 0);
if(ss==-1)
cerr<<"Error opening socket."<<endl;
return 0;
// Fill in address
struct sockaddr_in server;
server.sin_family=AF_INET;
server.sin_port=htons((unsigned short)port);
server.sin_addr.s_addr=INADDR_ANY;
// Bind to port
if(bind(ss, (struct sockaddr *)&server, sizeof(server))==-1)
cerr<<"Could not bind to port "<<port<<"."<<endl;
return 0;
// Ready to accept connections
if(listen(ss, 5)==-1)
cerr<<"Could not listen."<<endl;
return 0;
// Loop to accept connections
while(/* some condition */)
// Accept a connection
int s=accept(ss, 0, 0);
}This should work on any version of windows as long as you have winsock. The example code might need to be changed a little though since I copied it from a Linux program I had.

Relation between java and oracle

Hi,
This is general information about java and oracle.
I had worked in java last one year, but now switch to oracle i heared that nearly combination of each are implemented oops concept. But i know where it used in java, not in oracle.
In oracle, where we are implemented inheritance, polymorhism and encapsulation.
plz give some tips
Regards venki

does this mean you used to develop your applications on java and manuplate your data in Oracle over JDBC or Hibernate but then you started to develop PL/SQL applications for this need and use PL/SQL's OO features?
With my experiences I may say if you are working on data intensive database applications learning how to use effectively SQL and PL/SQL is critical, this is Oracle's native language not something written to work for any database vendor. http://www.oracle.com/pls/db102/portal.portal_db?selected=5

Communication between java and c++ app

I have a java app and a c++ app, and I would like theese to exchange information, how do I do that? I know one way would be to open a socket in each app and write/read from that, but that seems really unneccessary since both apps will probably be running on the same computer. It has to be a better way...

You can use the local file to exchange data or use JNI to invoke the C++ application method.

Interprocess socket communication between Java and C

Hello,
I have opened a socket to C-process listening at predefined port.
The C rpogram requires data to be send sandwiched between
"@BEGMSG\n" "@ENDMSG\n"
WHen the C program encounters \n it understands it is end of line and returns "\0"
kkSocket = new Socket("abcd",12013);
out = new PrintWriter(kkSocket.getOutputStream(), true);
is = new DataInputStream(kkSocket.getInputStream());
out.println("@BEGMSG@\n");
ibyteread = is.read();
System.out.println("Server 1 ::"+ibyteread);
out.println("INIT\tIMISFS11\timisdiag\tdamnyas1\tllgyZux8Mt2Qs\n");
ibyteread = is.read();
System.out.println("Server 1 ::"+ibyteread);
out.println("@ENDMSG@\n");
ibyteread = is.read();
System.out.println("Server 1 ::"+ibyteread);
My problem is the C-program gives error while reading the "@ENDMSG@";
Can any one tell the problem

Hello,
I have taken care of that,
Also i am writing as bytes
as shown below
fromUser= "@BEGMSG@\n";
String data = "\0INIT\tIMISFS11\timisdiag\tdamnyas1\tllgyZux8Mt2Qs\n";
String endmsg = "@ENDMSG@\n";
os.writeBytes(fromUser);
in.read();
os.flush();
os.writeBytes(data);
in.read();
os.flush();
os.writeBytes(endmsg);
ibyteread=in.read();
os.flush();
Now teh C-program reads the first two lines, but gets third line as empty or -1
Also i have to read the stream after every write, other wise my data is not written to C-program.
Some how my third statement which @ENDMSG@ is getting converted to empty string of length <=-1,
If i don;t read after os.writeBytes(data);
That line is ignored and C-program directly jumps on "@ENDMSG@\n";
and reads it.
Can any one tell this funny behaviour
Thanks

Udp communication between java and c?

Dear all,
I am currently trying to write a C udp client to communicate with a Java udp server.
for Java, this is a brief section of code I am using:
DatagramSocket serverSocket = new DatagramSocket(portNum);
DatagramPacket receivedPacket = new DatagramPacket(buffer,buffer.length);
serverSocket.receive(receivedPacket);
for C i am trying to use the windows socket api Winsock.
the results:..... the programs can not even connect.
does anybody know any workarounds ar any possible implemetations, i would really appreciate your help
thanks
ceemzek

This should work. What exactly do you mean by 'cannot connect', and what exceptions or incorrect behaviour are you seeing?

Communication between Java and C++, IDL/CORBA

I have not been working with CORBA before.... but as far as I know the server and client has to be prepared for CORBA during the developpenent. Am I wrong? Or is this only the case for IDL?
Is it possible to add CORBA/IDL to an already developped c++ server without modifying it?

You are correct.
CORBA is the architecture for one program to call another. Some changes will be needed to an existing program. The change might be small, but you will need access to the source.

Socket communication between Java and Python aplications.

I'm try to connect a pyhton client to a Java server through Socket. The problem is that the python client never receive anything. I'm using a ObjectOutputStream to send the msgs. Does anyone have any idea how make this works?!

RicardoS wrote:
So how do you do it?! What do you use?!Bytes! Normally I generate the bytes from XML.
Edited by: sabre150 on Mar 24, 2008 5:10 PM

Short dump Error during VM container communication between ABAP and JAVA.

Hello All,
Can anybody please help with resolving the following issue:
Short dump is displayed, when I try to insert CRM product (type: material) in the document (opportunity). This CRM product was created in CRM directly.
When I try to insert ECC migrated material, everything works fine.
Here is the details of dump:
Short text
    Error during VM container communication between ABAP and JAVA
Information on where terminated
    Termination occurred in the ABAP program "SAPLPRC_INT" - in "GET_PRICING_PROCEDURE_INFO".
    The main program was "SAPMHTTP ". In the source code you have the termination point in line 100 of the (Include) program "LPRC_INTF35".
Thank you!

hi Willie,
     this is the dump, and i have used the t-code sm52 . the VMC is not active.
|Short Text                                                                                        |
|    Error during VM Container communication between ABAP and JAVA.                                |
|What happened?                                                                                    |
|    The current program had to be terminated because of an                                        |
|    error when installing the R/3 System.                                                         |
|    Error in the RFC layer.                                                                       |
|What can you do?                                                                                  |
|    Note which actions and entries caused the error to occur.                                     |
|                                                                                                  |
|    Consult your SAP administrator.                                                               |
|                                                                                                  |
|    Using transaction ST22 for ABAP dump analysis, you can view, manage,                          |
|    and retain termination messages for longer periods.                                           |
|Error analysis                                                                                    |
|    An error has occurred in the RFC layer during communication between                           |
|    JAVA and the ABAP stack. This prevents data from being passed correctly                       |
|    between the two stacks.                                                                       |
|                                                                                                  |
|    Message    = TH_VMC_SERV_NOT_ACTIVE                                                           |
|    Return code = -1007                                                                           |
|    Pointer    = "000007DD348F6138"                                                               |
|How to correct the error                                                                          |
|    Check whether the VMC is active on your application server. To do this,                       |
|    run transaction SM52. If the VMC is not active, contact your SAP                              |
|    administrator.                                                                                |
Regards
Charles

Java and oracle in linux

hello frnds...i have installed oracle 10g in ubuntu 11.04....now i want to make database connection between java and oracle...so how can i do it??i know the java code..but the main problem is database driver..how can i give the classpath for specific jdbc dirver...pls tell me the steps to set classpath for jdbc driver...
thnx in advance..

884540 wrote:
hello frnds...i have installed oracle 10g in ubuntu 11.04....now i want to make database connection between java and oracle...so how can i do it??i know the java code..but the main problem is database driver..how can i give the classpath for specific jdbc dirver...pls tell me the steps to set classpath for jdbc driver...
thnx in advance..You can mention the classpath using the javac and java options:
javac -cp .;<path> <ClassName>.java
and
java -cp .;<path> <ClassName>
Or refer the below link to avoid mentioning classpath everytime you run/ compile the program
http://www.linuxquestions.org/questions/linux-software-2/j2sdk-install-174483/#post898715

Error during VM container communication between ABAP and JAVA

Hello,
While creation of SC, I am getting error "Error during VM container communication between ABAP and JAVA"
Based on earlier responses in this forum, I checked following activity.
1. T Code - BBP_CND_CHECK_CUST
Result - IPC Pricing is Active and IPC is now running in VMC
2. Run Report - RSVMCRT_HEALTH_CHECK
Result - The Java component is deactivated
3. As per OSS note 854170, Profile parameters were existed as below
a) vmcj/enable - on
b) vmcj/option/maxJavaHeap = 200M
So, How to get Java component activated?
Thanks,
Rahul Mandale

Thanks Markus,
For SM53, I am getting resulets as " Java is not active on this application server - Message no. SVMCRT011"
Can you suggest, what I need to do for it? I can't use SRM Shopping cart because of it. thanks in advance, Rahul
and dev_w0 trace ....
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Wed Aug 31 15:45:40 2011
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\CUS\DVEBMGS04\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\CUS\DVEBMGS04\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\CUS\DVEBMGS04\exe\dboraslib.dll' is "700.08", patchlevel (0.46)
B New connection 0 created
M sysno      04
M sid        CUS
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    52
M intno      20050900
M make:      multithreaded, Unicode, optimized
M pid        456
M
M kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 456) [dpxxdisp.c   1293]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          18304     (1408)
M DpShMCreate: sizeof(tm_adm)          3954072     (19672)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm)          528064     (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1452)
M DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 05C00040, size: 4613144)
M DpShMCreate: allocated sys_adm at 05C00040
M DpShMCreate: allocated wp_adm at 05C01E28
M DpShMCreate: allocated tm_adm_list at 05C065A8
M DpShMCreate: allocated tm_adm at 05C065D8
M DpShMCreate: allocated wp_ca_adm at 05FCBB70
M DpShMCreate: allocated appc_ca_adm at 05FD1930
M DpShMCreate: allocated comm_adm at 05FD3870
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06054730
M DpShMCreate: allocated gw_adm at 06054770
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 060547A0
M DpShMCreate: allocated wall_adm at 060547A8
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Wed Aug 31 15:45:41 2011
M ThInit: running on host crmsys
M
M Wed Aug 31 15:45:42 2011
M calling db_connect ...
C Prepending D:\usr\sap\CUS\DVEBMGS04\exe to Path.
C
C Wed Aug 31 15:45:47 2011
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@CRM on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   0619F158   061A46F4   061A3F7C
C Attaching to DB Server CRM (con_hdl=0,svchp=061A3EC8,svrhp=061B5794)
C Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
C
C Wed Aug 31 15:45:48 2011
C Now '/@CRM' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=061A3EC8,usrhp=061CA558)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@CRM on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   0619F158   061A46F4   061A3F7C
C Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
C Now 'SAPSR3/<pwd>@CRM' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance CRM is running on CRMSYS with ORACLE version 10.2.0.1.0 since 20110831
B
B Wed Aug 31 15:45:49 2011
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20110831 154542 CRMSYS
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Wed Aug 31 15:46:12 2011
I MtxInit: 0 0 0
M SHM_PRES_BUF               (addr: 0A7C0040, size: 4400000)
M SHM_ROLL_AREA          (addr: 788A0040, size: 61440000)
M SHM_PAGING_AREA          (addr: 0AC00040, size: 32768000)
M SHM_ROLL_ADM               (addr: 0CB50040, size: 615040)
M SHM_PAGING_ADM          (addr: 0CBF0040, size: 525344)
M ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 0CC80040
M ThCreateNoBuffer          index size: 3000 elems
M ThCreateVBAdm          allocated 12160 bytes (50 server) at 0CD10040
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 10E700C8, size: 30000000, end: 12B0C448)
B dbtbxbuf: Buffer TABLP (addr: 12B100C8, size: 10240000, end: 134D40C8)
B dbexpbuf: Buffer EIBUF (addr: 0FBA00D0, size: 4194304, end: 0FFA00D0)
B dbexpbuf: Buffer ESM   (addr: 134E00D0, size: 4194304, end: 138E00D0)
B dbexpbuf: Buffer CUA   (addr: 138F00D0, size: 3072000, end: 13BDE0D0)
B dbexpbuf: Buffer OTR   (addr: 13BE00D0, size: 4194304, end: 13FE00D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Wed Aug 31 15:46:15 2011
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 1946AA80
S
S Wed Aug 31 15:46:16 2011
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1D6D00A8
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1D6D0430
S    using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2132 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A Wed Aug 31 15:46:18 2011
A
A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 73 MB, reducing # of fragments
A System page size: 4kb, total admin_size: 5132kb, dir_size: 5076kb.
A Attached to PXA (address 688A0040, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A
A Wed Aug 31 15:46:20 2011
A ABAP ShmAdm attached (addr=57A40000 leng=20955136 end=58E3C000)
A >> Shm MMADM area (addr=57EB5E58 leng=126176 end=57ED4B38)
A >> Shm MMDAT area (addr=57ED5000 leng=16150528 end=58E3C000)
A RFC Destination> destination crmsys_CUS_04 host crmsys system CUS systnr 4 (crmsys_CUS_04)
A
A Wed Aug 31 15:46:21 2011
A RFC Options> H=crmsys,S=04,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects          allocated 13730 bytes at 0FFB0040
N
N Wed Aug 31 15:46:22 2011
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\CUS\DVEBMGS04\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\CUS\DVEBMGS04\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N
N Wed Aug 31 15:46:23 2011
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B    dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B     max_blocking_factor = 15, max_in_blocking_factor      =   5,
B     min_blocking_factor = 10, min_in_blocking_factor      =   5,
B     prefer_union_all    =   0, prefer_join                 =   0,
B     prefer_fix_blocking =   0, prefer_in_itab_opt          =   1,
B     convert AVG         =   0, alias table FUPD            =   0,
B     escape_as_literal   =   1, opt GE LE to BETWEEN        =   0,
B     select *            =0x0f, character encoding          = STD / <none>:-,
B     use_hints           = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B                           rule_fae->0, concat_fae->0, concat_fae_or->0
W
W Wed Aug 31 15:46:24 2011
W    ITS Plugin: Path dw_gui
W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
W    ITS Plugin: sizeof(SAP_UC) 2
W    ITS Plugin: Release: 700, [7000.0.52.20050900]
W    ITS Plugin: Int.version, [32]
W    ITS Plugin: Feature set: [10]
W    ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume crmsys_CUS_04
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
B
B Wed Aug 31 15:46:48 2011
B table logging switched off for all clients
M
M Wed Aug 31 15:47:55 2011
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 05BD0040
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 05BD07A8
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 05BD07E0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 05BD07EC
A
A Wed Aug 31 15:48:44 2011
A RFC FRFC> fallback on the central gateway crmsys sapgw04 activ
B
B Wed Aug 31 15:49:47 2011
B dbmyclu : info : my major identification is 3232288873, minor one 4.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my initial uuid is D98FA690E8AA314D9B69930868792664.
B dbmyclu : info : current optimistic cluster level: 0
B dbmyclu : info : pessimistic reads set to 2.

COMMUNICATION BETWEEN JAVASCRIPT AND JAVA APPLET: US$20 AWARD FOR SOLUTION!

COMMUNICATION BETWEEN JAVASCRIPT AND JAVA APPLET PROBLEM (Easy Filter Java Applet) -
US$20 TO ANYONE WHO CAN RESOLVE THE PROBLEM
To forum visitors:
I am prepared to pay a standard shareware fee of US$20 to a user who can resolve this technical problem.
If your advice resolves the problem, I'll forward the payment to your postal address (include your
address with your reply, and also your email address)
I am attempting to enable a HTML button (using Javascript's onClick command) to directly input a number into one of the parameter text boxes in the Easy Filter Java applet (ie, enter a new color value number in the text field of the standard Colors Multiplicator Filter interface).
The applet is Freeware and can be downloaded at: http://www.javazoom.net/applets/easyfilter10/EasyFilter10.html
(It is a very effective bitmap display and editing utility)
To achieve this, I am trying to access the part of the applet that defines and sets the textbox. The text box is defined in the .class file by accessing the parameter details in the genericfilter.txt file (accompanies the .class files). I need to access 'private String appletInitialize()' and then one of the 'textFieldParameters' which sets the textbox.
I understand the basic syntax for referencing the applet:
document.appletname.setString("An example"). However, accessing the text fields in this applet is more complex!!
Please can you recommend the correct Javascript syntax to achieve communication with the applet.
Thank you for your kind assistance.
JM Graham
[email protected]
The Java source code for the applet: EasyFilter.class
# Easy Filter - E.B/JavaZOOM 1999 #
# Contact: [email protected] #
# http://javazoom.hypermart.net #
/* Originally compiled from EasyFilter.java */
import java.awt.*;
import java.io.*;
import java.net.*;
import java.applet.Applet;
import java.awt.event.KeyEvent;
import java.awt.event.KeyListener;
import java.awt.image.MemoryImageSource;
import java.awt.image.PixelGrabber;
import java.util.Vector;
public synchronized class EasyFilter extends Applet implements KeyListener
private String paramFileName;
private Color bgColor;
private Color fgColor;
private Color parColor;
private Color sepColor;
private Color titleColor;
private Color helpColor;
private int WinWidth;
private int WinHeight;
private String title;
private String logoFileName;
private String originalImageFileName;
private String filteredCaption;
private String originalCaption;
private Vector paramsName;
private Vector paramsValue;
private Vector paramsComment;
private Panel panelParameters[];
private Label labelParameters[];
private TextField textFieldParameters[];
private Label labelComments[];
private int nbParameters;
private ScrollPane scrollPaneParams;
private Panel panelParams;
private Image theLogo;
private Image theOriginalImage;
private Image theFilteredImage;
private int theOriginalPixelArray[];
private int logoWidth;
private int logoHeight;
private int imageWidth;
private int imageHeight;
private drawCanvas canvasTitle;
private Panel panelTitle;
private Label labelTitle;
private Panel panelImages;
private Panel panelOriginalImage;
private drawCanvas canvasOriginalImage;
private Label labelOriginalImage;
private Panel panelFilteredImage;
private drawCanvas canvasFilteredImage;
private Label labelFilteredImage;
private Panel panelHelp;
private Label labelHelp;
private int Yspc;
private FilterImplementation theFilter;
public void init()
String string = null;
string = appletInitialize();
setBackground(bgColor);
if (string != null)
removeAll();
setBackground(Color.white);
setForeground(Color.black);
Label label = new Label(new StringBuffer("Error: ").append(string).toString(), 1);
Panel panel = new Panel();
panel.add(label);
add(panel);
setLayout(new FlowLayout(1, 5, Yspc));
public void keyPressed(KeyEvent keyEvent)
panelHelp.removeAll();
boolean flag = true;
if (KeyEvent.getKeyText(keyEvent.getKeyCode()).equals("Enter"))
for (int i = 0; i < nbParameters; )
try
paramsValue.setElementAt(new Double(textFieldParameters.getText()), i);
i++;
catch (NumberFormatException e)
labelHelp.setText(labelParameters[i].getText() + ": Not a Number");
flag = false;
break;
if (flag == 1)
labelHelp.setText(" .... Running, please wait .... ");
labelHelp.setAlignment(1);
panelHelp.add(labelHelp);
panelHelp.doLayout();
theFilter.updateParameters(paramsValue);
theFilter.computeFilter();
theFilteredImage = createImage(new MemoryImageSource(theFilter.getFinalImageWidth(), theFilter.getFinalImageHeight(), theFilter.getFinalImageBuffer(), 0, theFilter.getFinalImageWidth()));
canvasFilteredImage.setImage(theFilteredImage);
canvasFilteredImage.setBounds(0, 0, theFilter.getFinalImageWidth(), theFilter.getFinalImageHeight());
canvasFilteredImage.repaint();
panelHelp.removeAll();
labelHelp.setText("- Done -");
else
labelHelp.setText("- Press Enter to run the Filter -");
labelHelp.setAlignment(1);
panelHelp.add(labelHelp);
panelHelp.doLayout();
public void keyReleased(KeyEvent keyEvent)
public void keyTyped(KeyEvent keyEvent)
private String appletInitialize()
WinWidth = size().width;
WinHeight = size().height;
if (getParameter("bgcolor") == null)
bgColor = new Color(0, 0, 40);
else
bgColor = new Color(Integer.parseInt(getParameter("bgcolor"), 16));
if (getParameter("fgcolor") == null)
fgColor = new Color(255, 255, 255);
else
fgColor = new Color(Integer.parseInt(getParameter("fgcolor"), 16));
if (getParameter("sepcolor") == null)
sepColor = new Color(158, 128, 128);
else
sepColor = new Color(Integer.parseInt(getParameter("sepcolor"), 16));
if (getParameter("parcolor") == null)
parColor = new Color(24, 24, 24);
else
parColor = new Color(Integer.parseInt(getParameter("parcolor"), 16));
if (getParameter("titlecolor") == null)
titleColor = new Color(255, 255, 0);
else
titleColor = new Color(Integer.parseInt(getParameter("titlecolor"), 16));
if (getParameter("helpcolor") == null)
helpColor = new Color(0, 255, 255);
else
helpColor = new Color(Integer.parseInt(getParameter("helpcolor"), 16));
paramsName = new Vector();
paramsValue = new Vector();
paramsComment = new Vector();
paramFileName = getParameter("paramfile");
String string = readParams(paramFileName);
if (string != null)
return string;
MediaTracker mediaTracker = new MediaTracker(this);
theOriginalImage = getImage(getDocumentBase(), originalImageFileName);
mediaTracker.addImage(theOriginalImage, 0);
if (logoFileName != null)
theLogo = getImage(getDocumentBase(), logoFileName);
mediaTracker.addImage(theLogo, 1);
try
mediaTracker.waitForAll();
catch (InterruptedException e1)
return "Error while loading image";
if (mediaTracker.isErrorAny())
return "Error while loading image";
if (logoFileName != null)
logoWidth = theLogo.getWidth(this);
logoHeight = theLogo.getHeight(this);
imageWidth = theOriginalImage.getWidth(this);
imageHeight = theOriginalImage.getHeight(this);
theOriginalPixelArray = new int[imageWidth * imageHeight];
PixelGrabber pixelGrabber = new PixelGrabber(theOriginalImage, 0, 0, imageWidth, imageHeight, theOriginalPixelArray, 0, imageWidth);
try
pixelGrabber.grabPixels();
panelTitle = new Panel();
canvasTitle = new drawCanvas();
labelTitle = new Label();
panelTitle.setLayout(new FlowLayout(1, 10, Yspc));
add(panelTitle);
panelTitle.setBackground(bgColor);
panelTitle.add(canvasTitle);
canvasTitle.setImage(theLogo);
canvasTitle.setBounds(0, 0, logoWidth, logoHeight);
labelTitle.setText(title);
catch (InterruptedException e2)
return "Internal Error, Try RELOAD !";
if (title != null)
panelTitle.add(labelTitle);
labelTitle.setForeground(titleColor);
labelTitle.setFont(new Font("Dialog", 1, 14));
panelImages = new Panel();
panelOriginalImage = new Panel();
canvasOriginalImage = new drawCanvas();
labelOriginalImage = new Label();
panelFilteredImage = new Panel();
canvasFilteredImage = new drawCanvas();
labelFilteredImage = new Label();
panelImages.setLayout(new FlowLayout(1, 10, Yspc));
add(panelImages);
panelImages.setBackground(bgColor);
panelOriginalImage.setLayout(new BorderLayout(0, 2));
panelImages.add(panelOriginalImage);
panelOriginalImage.setBackground(Color.black);
panelOriginalImage.add("Center", canvasOriginalImage);
canvasOriginalImage.setImage(theOriginalImage);
canvasOriginalImage.setBounds(0, 0, imageWidth, imageHeight);
labelOriginalImage.setText(originalCaption);
labelOriginalImage.setAlignment(1);
panelOriginalImage.add("South", labelOriginalImage);
labelOriginalImage.setBackground(Color.lightGray);
labelOriginalImage.setForeground(Color.black);
labelOriginalImage.setFont(new Font("SansSerif", 0, 10));
panelFilteredImage.setLayout(new BorderLayout(0, 2));
panelImages.add(panelFilteredImage);
panelFilteredImage.setBackground(Color.black);
panelFilteredImage.add("Center", canvasFilteredImage);
theFilter = new FilterImplementation(paramsValue, theOriginalPixelArray, imageWidth, imageHeight);
theFilter.computeFilter();
theFilteredImage = createImage(new MemoryImageSource(theFilter.getFinalImageWidth(), theFilter.getFinalImageHeight(), theFilter.getFinalImageBuffer(), 0, theFilter.getFinalImageWidth()));
canvasFilteredImage.setImage(theFilteredImage);
canvasFilteredImage.setBounds(0, 0, theFilter.getFinalImageWidth(), theFilter.getFinalImageHeight());
labelFilteredImage.setText(filteredCaption);
labelFilteredImage.setAlignment(1);
panelFilteredImage.add("South", labelFilteredImage);
labelFilteredImage.setBackground(Color.lightGray);
labelFilteredImage.setFont(new Font("SansSerif", 0, 10));
scrollPaneParams = new ScrollPane(0);
panelParams = new Panel();
nbParameters = paramsName.size();
int i = WinHeight - (33 + 7 * Yspc + logoHeight + imageHeight + 23);
if (i < Yspc + 2 + 24)
i = Yspc + 2 + 24;
scrollPaneParams.setBounds(0, 0, WinWidth - 10, i);
panelParams.setLayout(new GridLayout(nbParameters, 1, 5, Yspc / 2));
scrollPaneParams.add(panelParams);
panelParams.setBackground(sepColor);
panelParameters = new Panel[nbParameters];
labelParameters = new Label[nbParameters];
textFieldParameters = new TextField[nbParameters];
labelComments = new Label[nbParameters];
for (int j = 0; j < nbParameters; j++)
panelParameters[j] = new Panel();
panelParameters[j].setLayout(new FlowLayout(0, 5, 1));
panelParams.add(panelParameters[j]);
panelParameters[j].setBackground(parColor);
labelParameters[j] = new Label();
labelParameters[j].setText((String)paramsName.elementAt(j));
panelParameters[j].add(labelParameters[j]);
labelParameters[j].setForeground(fgColor);
labelParameters[j].setFont(new Font("Dialog", 1, 12));
textFieldParameters[j] = new TextField(8);
textFieldParameters[j].setText(paramsValue.elementAt(j).toString());
panelParameters[j].add(textFieldParameters[j]);
textFieldParameters[j].setBackground(fgColor);
textFieldParameters[j].addKeyListener(this);
labelComments[j] = new Label();
labelComments[j].setText((String)paramsComment.elementAt(j));
panelParameters[j].add(labelComments[j]);
labelComments[j].setForeground(fgColor);
add(scrollPaneParams);
panelHelp = new Panel();
labelHelp = new Label();
panelHelp.setLayout(new FlowLayout(1, 5, 0));
add(panelHelp);
panelHelp.setBackground(bgColor);
labelHelp.setText(" Change colour values and press enter ");
labelHelp.setAlignment(1);
panelHelp.add(labelHelp);
labelHelp.setForeground(helpColor);
return null;
private String readParams(String string1)
Object object1;
String string2;
if (string1 == null)
return "Filename of filter's parameters needed";
try
URL uRL = new URL(getDocumentBase(), string1);
URLConnection uRLConnection = uRL.openConnection();
uRLConnection.setDoInput(true);
uRLConnection.setUseCaches(false);
BufferedReader bufferedReader = new BufferedReader(new InputStreamReader(uRLConnection.getInputStream()));
string2 = null;
catch ()
return object1.getMessage();
catch ()
return object1.getMessage();
catch ()
return object1.getMessage();
if (bufferedReader != null)
Object object2;
try
for (object2 = bufferedReader.readLine(); object2 != null && string2 == null; object2 = bufferedReader.readLine())
string2 = extractFormat(object2);
catch ()
string2 = object2.getMessage();
finally
bufferedReader.close();
if (string2 != null)
return string2;
else
return null;
private String extractFormat(String string1)
if (string1.length() == 0)
return null;
int i = 0;
int j = string1.indexOf(" ", i);
if (j == -1)
return "Bad format error (space missing)";
String string2 = string1.substring(i, j);
if (string2.equals("TITLE"))
i = j;
j = string1.indexOf(34, i);
if (j == -1)
return "Bad format (Double quote in TITLE missing)";
i = j + 1;
j = string1.indexOf(34, i);
if (j == -1)
return "Bad format (Double quote in TITLE missing)";
title = string1.substring(i, j);
return null;
if (string2.equals("ORIGINALCAPTION"))
i = j;
j = string1.indexOf(34, i);
if (j == -1)
return "Bad format (Double quote in ORIGINALCAPTION missing)";
i = j + 1;
j = string1.indexOf(34, i);
if (j == -1)
return "Bad format (Double quote in ORIGINALCAPTION missing)";
originalCaption = string1.substring(i, j);
return null;
if (string2.equals("FILTEREDCAPTION"))
i = j;
j = string1.indexOf(34, i);
if (j == -1)
return "Bad format (Double quote in FILTEREDCAPTION missing)";
i = j + 1;
j = string1.indexOf(34, i);
if (j == -1)
return "Bad format (Double quote in FILTEREDCAPTION missing)";
filteredCaption = string1.substring(i, j);
return null;
if (string2.equals("LOGO"))
i = j + 1;
j = string1.length();
logoFileName = string1.substring(i, j);
return null;
if (string2.equals("ORIGINALIMAGE"))
i = j + 1;
j = string1.length();
originalImageFileName = string1.substring(i, j);
return null;
if (!string2.equals("PARAM"))
return null;
i = j;
j = string1.indexOf(34, i);
if (j == -1)
return "Bad format in a PARAM line";
i = j + 1;
j = string1.indexOf(34, i);
if (j == -1)
return "Bad format in a PARAM line";
paramsName.addElement(string1.substring(i, j));
i = j + 2;
j = string1.indexOf(32, i);
if (j == -1)
return "Bad format in a PARAM line";
try
paramsValue.addElement(new Double(string1.substring(i, j)));
j = string1.indexOf(34, i);
catch (NumberFormatException e)
return "Bad format in a PARAM line";
if (j == -1)
return "Bad format (Double quote in PARAM comment missing)";
i = j + 1;
j = string1.indexOf(34, i);
if (j == -1)
return "Bad format (Double quote in PARAM comment missing)";
paramsComment.addElement(string1.substring(i, j));
return null;
public EasyFilter()
logoHeight = 33;
Yspc = 5;

Addition to my above submission
To clarify, I'll offer the US$20 to the FIRST person who offers me a workable solution to the problem, not to everyone!!!
JMGRAHAM

Error during VM container communication between ABAB and Java

Hi All
Once in a while we get this error while creating shopping cart.
'Error during VM container communication between ABAB and Java"
Why ? only one user has thos problem
SAP SRM 5 .0
what could be the reason ?
It is not happening always.
any help /reason for this error is appreciated?
br
muthu

Hi,
Please check the below link :
/message/6055324#6055324 [original link is broken]
i hope this will help you..
With Regards,
CSK

Communication between jsp and abstractportalcomponent

Hello All
Communication between jsp and abstractPortalComponent.
jsp contains one input text field and one submit button.
when the user clicks on submit button it will call the component and that input value will
display in same jsp page.
how this communication will happen?
Rgrds
Sri

Hi Srikanth,
In the JAVA File,
OnSubmit Event,
String inputvalue ;
InputField myInputField = (InputField) getComponentByName("Input_Field_ID");
if (myInputField != null) {
               inputvalue = myInputField.getValueAsDataType().toString();
request.putValue("textvalue", inputvalue);
request is IPORTALCOMPONENTREQUEST Object.
In JSP File,   to retreive the value,
<%
String textstring = (String) ComponentRequest.getValue("textvalue");
%>
In PORTALAPP.XML File,
<component name="component name">
      <component-config>
        <property name="ClassName" value="classname"/>
        <property name="SafetyLevel" value="no_safety"/>
      </component-config>
      <component-profile>
        <property name="tagLib" value="/SERVICE/htmlb/taglib/htmlb.tld"/>
      </component-profile>
    </component>
Using the code above, You can pass and read values between abstract portal component and Jsp Page.
Instead of this, I suggest you to use JSPDYNPAGE Component for Data Exchange.
Check the [Link|http://help.sap.com/saphelp_nw2004s/helpdata/de/ce/e0a341354ca309e10000000a155106/frameset.htm].
Hope this helps you.
Regards,
Eben Joyson

Communication between Java and Oracle

Similar Messages

Maybe you are looking for