Communication between Lync - Mediant . 488 evt from mediant site when SBC Remote Early Media RTP parameter is set to Delayed

Hi,
I have a problem with Early Media functionality between Lync and Mediant 1000 E-SBC. If SBC Remote Early Media RTP parameter is set to Delayed (on IP Profile Settings level) i cannot establish connection. After receiving 183 Session progress (from Lync site)
call is released with 488 event (488 is sent from mediant site). Before "Not applicable here" in logs i can see:
6d:9h:46m:35s (      lgr_flow)(18219     )  #MediaResourcesConnector::AllocateMediaResources
(lgr_media_connector)(18220     )  MediaResourcesConnector:CalculateResourcesForAppExtensions Leading:DSP Opposite:NONE MediationLevel:NONE
(lgr_media_service)(18221     )  ServicesMngr: Allocate Media channel. current active: 0 and max is: 0
6d:9h:46m:35s (lgr_media_service)(18222     ) !! [ERROR] ServicesMngr: Cannot allocate more Media channel. current active: 0 and max is: 0
6d:9h:46m:35s (lgr_media_service)(18261     )  (#292) ChannelResource Deallocated.
6d:9h:46m:35s (lgr_media_service)(18262     )  (#293) ChannelResource Deallocated.
I need this because if im using SBC Remote Early Media RTP = Immidiately i cannot hear ringtone. Could someone give me any clues what is wrong in config?
I enclosed detailed logs:
Log is Activated  6d:9h:46m:35s (       lgr_sbc)(18057     )  (#51) SBCRoutesIterator Allocated.
(       lgr_sbc)(18058     )  Classification Succeeded - Source IP Group #2.
(       lgr_sbc)(18059     )  CallAdmission::AddDialog: Type INVITE Direction In IP group 2: 1 SRD 2: 1 SRD ovflw:1 used unres:1
(      lgr_flow)(18060     )  (#51)SBCRoutesIterator::Change State From: InitialRouting To : AlternativeRouting
(       lgr_sbc)(18061     )  CallAdmission::AddDialog: Type INVITE Direction Out IP group 1: 1 SRD 1: 1 SRD ovflw:1 used unres:2
(      lgr_flow)(18062     )  (#51)SBCRoutesIterator::Next route found: Route by: IPGroup , IP Group ID: 1, Live:1
(       lgr_sbc)(18063     )  Routing Succeeded -IP2IPRouting Rule #2.
(      lgr_flow)(18064     )  ---- Incoming SIP Message from switch:5060 to SIPInterface #2 UdpTransportObject[#2] ----
6d:9h:46m:35s INVITE sip:1234@Mediant;user=phone SIP/2.0
Allow: INVITE, ACK, CANCEL, BYE, PRACK, NOTIFY, REFER, SUBSCRIBE, OPTIONS, UPDATE, INFO
Supported: replaces,timer,path,100rel
User-Agent: OmniPCX Enterprise R10.1.1 j2.603.33.a
Session-Expires: 1800;refresher=uac
Min-SE: 900
P-Asserted-Identity: "TPSA 12" <sip:221111111@switch;user=phone>
Content-Type: application/sdp
To: <sip:1234@Mediant;user=phone>
From: "TPSA 12" <sip:221111111@switch;user=phone>;tag=434636a077aeb3418ef3d5c0887debbd
Contact: <sip:221111111@switch;transport=UDP>
Call-ID: 5050e7eb34568795c049d14a6b088172@switch
CSeq: 1290334631 INVITE
Via: SIP/2.0/UDP switch;branch=z9hG4bK668ced008893ef177292c6f0f662ca02
Max-Forwards: 70
Content-Length: 265
v=0
o=OXE 1415263596 1415263596 IN IP4 switch
s=abs
c=IN IP4 172.16.20.32
t=0 0
m=audio 32156 RTP/AVP 8 4 97
a=sendrecv
a=rtpmap:8 PCMA/8000
a=ptime:20
a=maxptime:30
a=rtpmap:4 G723/8000
a=ptime:30
a=maxptime:30
a=rtpmap:97 telephone-event/8000
(     sip_stack)(18066     )  New SIPMessage created - #57
(     sip_stack)(18067     )  New SIPSBCCallLeg created - #1695
6d:9h:46m:35s (     sip_stack)(18068     )  New AcSIPCall created - #1922
(     sip_stack)(18069     )  AcTransactionUser::AddMessageToQueue: Queueing message
6d:9h:46m:35s (     sip_stack)(18102     )  SIPCall(#1922) changes state from Idle to Invited
6d:9h:46m:35s (     sip_stack)(18164     )  SIPCall(#1921) changes state from Idle to Inviting
(     sip_stack)(18165     )  SIPSessionTimer<TU#1921>::FillSTRequestData - Session-Timer mode: TRANSPARENT
(      lgr_flow)(18166     )  ---- Outgoing SIP Message to Lync2:5068 from SIPInterface #1 TcpTransportObject[#648] ----
6d:9h:46m:35s (      lgr_flow)(18178     )  ---- Incoming SIP Message from Lync2:5068 to SIPInterface #1 TcpTransportObject[#648] ----
SIP/2.0 183 Session Progress
FROM: "TPSA 12"<sip:221111111@switch;user=phone>;tag=1c1656521459
TO: <sip:1234@Mediant;user=phone>;tag=499c98c8cd;epid=DE8F26F104
CSEQ: 1 INVITE
CALL-ID: 1656462877611201494635@Mediant
VIA: SIP/2.0/TCP Mediant:5068;branch=z9hG4bKac1657277504;alias
CONTACT: <sip:lyfe02.grupa.lukas:5068;transport=Tcp;maddr=Lync2>
CONTENT-LENGTH: 281
CONTENT-TYPE: application/sdp
ALLOW: CANCEL
ALLOW: BYE
ALLOW: UPDATE
ALLOW: PRACK
REQUIRE: 100rel
SERVER: RTCC/5.0.0.0 MediationServer
Rseq: 1
v=0
o=- 89 1 IN IP4 Lync2
s=session
c=IN IP4 Lync2
b=CT:1000
t=0 0
m=audio 52882 RTP/AVP 8 97
c=IN IP4 Lync2
a=rtcp:52883
a=label:Audio
a=sendrecv
a=rtpmap:8 PCMA/8000
a=rtpmap:97 telephone-event/8000
a=fmtp:97 0-16
m=audio 0 RTP/SAVP 8 4 97
(     sip_stack)(18180     )  New SIPMessage created - #55
(      lgr_flow)(18181     )  |       |(SIPTU#1921)183 State:Proceeding(1656462877611201494635@Mediant)
6d:9h:46m:35s (   lgr_stk_ses)(18182     )  |       |       |       #1694:SIP_ALERT_EV(1656462877611201494635@Mediant)
(     sip_stack)(18183     )  SDPBody::New - id = 126
(     sip_stack)(18184     )  SDPBodyMedia::New - id = 541
(     sip_stack)(18185     )  SDPBodyMedia::New - id = 540
(     sip_stack)(18186     )  <BaseSIP SDPSESSION #1694> UpdateChosenMediaByCN - CN as Remote -1
(     sip_stack)(18187     )  SDPBodyMedia::New - id = 539
(     sip_stack)(18188     )  SDPBodyMedia::New - id = 538
(   lgr_stk_ses)(18189     )  SBCOfferAnswerMngr(#1694) changes state from SIP_MEDIA_OFFERING to SIP_MEDIA_COMPLETED
(   lgr_stk_ses)(18190     )  <SESSION #1694> SendToCall - event: MEDIA_NEGOTIATION_COMPLETED_EV  m_Call#1852
(      lgr_flow)(18191     )  |       |       (#1852)SBCCall <- (#1694)SIPSBCCallLeg: MEDIA_NEGOTIATION_COMPLETED_EV
(      lgr_flow)(18192     )  |       (#59)SBCCallPlacementFeature <- (#1852)SBCCall: MEDIA_NEGOTIATION_COMPLETED_EV
(      lgr_flow)(18193     )  |       (#1853)SBCParticipantEndPoint <- (#59)SBCCallPlacementFeature: MEDIA_NEGOTIATION_COMPLETED_EV
6d:9h:46m:35s (      lgr_flow)(18219     )  #MediaResourcesConnector::AllocateMediaResources
(lgr_media_connector)(18220     )  MediaResourcesConnector:CalculateResourcesForAppExtensions Leading:DSP Opposite:NONE MediationLevel:NONE
(lgr_media_service)(18221     )  ServicesMngr: Allocate Media channel. current active: 0 and max is: 0
6d:9h:46m:35s (lgr_media_service)(18222     ) !! [ERROR] ServicesMngr: Cannot allocate more Media channel. current active: 0 and max is: 0
6d:9h:46m:35s (lgr_media_service)(18261     )  (#292) ChannelResource Deallocated.
6d:9h:46m:35s (lgr_media_service)(18262     )  (#293) ChannelResource Deallocated.
6d:9h:46m:35s (      lgr_flow)(18263     )  |       |       (#1853)SBCCall <- (#1695)SIPSBCCallLeg: RELEASE_EV
(      lgr_flow)(18264     )  |       |       (#1853) SBCCall changing states from:AlertingState to:DisconnectingState
(      lgr_flow)(18265     )  |       (#1852)SBCParticipantEndPoint <- (#1853)SBCCall: RELEASE_EV
(      lgr_flow)(18266     )  (#1852) SBCParticipantEndPoint changing states from:InitiatedState to:ReleaseingState
(      lgr_flow)(18267     )  (#1035)SBCController <- (#1852)SBCParticipantEndPoint: RELEASE_EV
(      lgr_flow)(18268     )  |       |       (#1035) SBCController changing states from:EstablishingState to:DisconnectingState
(      lgr_flow)(18269     )  |       (#1853)SBCParticipantEndPoint <- (#1035)SBCController: RELEASE_EV
(      lgr_flow)(18270     )  (#1853) SBCParticipantEndPoint changing states from:InitiatedState to:ReleaseingState
(      lgr_flow)(18271     )  |       (#59)SBCCallPlacementFeature <- (#1853)SBCParticipantEndPoint: RELEASE_EV
(      lgr_flow)(18272     )  (#59) SBCCallPlacementFeature changing states from: Initiated to: Releasing
6d:9h:46m:35s (      lgr_flow)(18273     )  |       |       (#1852)SBCCall <- (#59)SBCCallPlacementFeature: RELEASE_EV
(      lgr_flow)(18274     )  |       |       (#1852) SBCCall changing states from:AlertingState to:DisconnectingState
(      lgr_flow)(18275     )  |       |       |       (#1694)SIPSBCCallLeg <- (#1852)SBCCall: RELEASE_EV
(     sip_stack)(18276     )  New SIPMessage created - #52
(      lgr_flow)(18277     )  |       |(SIPTU#1921)DISCONNECT_REQ State:Proceeding(1656462877611201494635@Mediant)
(     sip_stack)(18278     )  New SIPMessage created - #49
(      lgr_flow)(18279     )  ---- Outgoing SIP Message to Lync2:5068 from SIPInterface #1 TcpTransportObject[#648] ----
CANCEL sip:1234@Mediant;user=phone SIP/2.0
Via: SIP/2.0/TCP Mediant:5068;branch=z9hG4bKac1657277504;alias
Max-Forwards: 70
From: "TPSA 12" <sip:221111111@switch;user=phone>;tag=1c1656521459
To: <sip:1234@Mediant;user=phone>;epid=DE8F26F104
Call-ID: 1656462877611201494635@Mediant
CSeq: 1 CANCEL
User-Agent: E-SBC/v.6.60A.260.002
Reason: SIP ;cause=488 ;text="488 Not Acceptable Here"
Content-Length: 0
(     sip_stack)(18281     )  Resource SIPMessage deleted - #49
6d:9h:46m:35s (     sip_stack)(18354     )  New SIPMessage created - #42
(     sip_stack)(18355     )  Resource SIPMessage deleted - #42
(      lgr_flow)(18356     )  |       | TransactionUserMngr::ReturnTransactionUser - #1921
(     sip_stack)(18357     )  SIPCall(#1921) changes state from Disconnected to Idle
6d:9h:46m:40s (     sip_stack)(18358     )  New SIPMessage created - #47
(     sip_stack)(18359     )  Resource SIPMessage deleted - #47
(      lgr_flow)(18360     )  |       | TransactionUserMngr::ReturnTransactionUser - #1922
(     sip_stack)(18361     )  SIPCall(#1922) changes state from Disconnected to Idle

Hi,
On Mediant 1000 E-SBC SBC tab, when set Remote Early Media RTP Behavior to
Delayed, but also check if the following configuration set correctly:
SBC Media Security Behavior: SRTP
PRACK Mode: Optional
Remote Update Support: Supported Only After Connect
Remote Re-INVITE:  Supported Only With SDP
Remote Delayed Offer Support: Not Supported
Remote REFER Behavior: Handle Locally
Remote 3xx Behavior: Handle Locally
Enforce MKI Size: Enforce
You can refer this
link
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Similar Messages

  • Communicating between GPIB IEEE 488-1978 Instrument and LabView

    Hi,
    I'm currently trying to convert some old BBC BASIC Code into Labview 6.1.
    The BBC Computer has a GPIB Comms Unit attached to it to communicate with an old Marconi Instruments Microwave Counter 2440 using GPIB IEEE 488-1978.
    I am currently trying to get Labview to communicate with the Counter using GPIB 488 vis and a NI GPIB 488.2 Card but I'm not able to get anything out of the Counter or get MAX to even acknowledge the equipment exists.
    I was wondering if anyone out there knows if it is possible to communicate with a GPIB IEEE 488-1978 instrument in Labview 6.1 (or any other LV Versions) and if it is, does anyone have a driver for the instrument (Marconi Instruments Microwave Counter 2440 circa 19
    84) or having any helpful tips on the protocol for talking to a IEEE 488-1978 instrument.(I have some previous experience using VISA.)
    Many Thanks in Advance for your help.
    Sammy Mason

    I have done this with several instruments. It is best to get a hold of the manual for this instrument and see what commands it uses.
    MAX will not find this using the *IDN? query. In MAX, open the "Communicate With Instrument" window and type "ID?" (without the quotes), and hit query. You should get some basic information back from your instrument.
    I use GPIB Read and GPIB Write most often. Your instrument probably doesn't support much else. Maybe Clear and Poll.
    Be careful if you are using a newer, faster computer. There are Knowledge Bases and Discussion Forum topics that discuss the problems that can arise. To prevent these problems, I created my own Read and Write VIs. They just have a few milliseconds delay before the read or writ
    e takes place
    Attachments:
    GPIB_Read_with_Delay.vi ‏37 KB
    GPIB_Write_with_Delay.vi ‏35 KB

  • Firefox does not save my tabs and windows from last time when I start it although i have already set it so (on Macbook)

    Firefox does not save my tabs and windows from last time, although i have already set it so (on a Macbook) (newest version)

    If you use [[Clear Recent History]] in Firefox 3.5 and later to clear the 'Browsing History' when you close Firefox then restoring tabs from the last session ("Save & Quit" or "Show my windows and tabs from last time") doesn't work.

  • When wanting to download a PDF file from a site, when cliicking on the link, Firefox 3.6.13 goes to a blank page. Previous versions worked perfectly. How do I fix this please?

    Since no window shows up asking where to download, etc as happens in other browsers (Opera) and in previous versions of Firefox, no able to click on a web site link to download a PDF file. Just goes to a blank page.

    Some firewalls like Kaspersky can block content and send a 1x1 GIF image instead.
    Kaspersky: Protection > Firewall > Filtration system: disable the "Banner Ad Blocker"
    See [[Configuring Kaspersky Internet Security]] and [[Firewalls]]

  • Time machine on external drive will not back up itunes media file on a separate external drive. Have already reformated itunes media drive,dragged itunes media backup file from time machine (old copy) and removed time machine plist and restarted.

    Two external drives, one for time machine backups and a second (daisy chained firewire) for itunes media folder . Time machine fails to backup the media file saying could not be completed, with no error specified. Steps taken already include reformating drive with media, dragging older media backup file from time machine disc to media disc, and deleting time machine plist and starting time macine preferences upon startup. Media folder is approx 200 gb, mostly ripped dvd movies.
    Any help for this??
    Thanks

    Tks for the help. Tried to eliminate duplicates. Copy below.
    6/11/14 3:07:33.458 PM com.apple.backupd[532]: Found 2332 files (193.66 GB) needing backup
    6/11/14 3:07:33.488 PM com.apple.backupd[532]: 219.71 GB required (including padding), 539.32 GB available
    6/11/14 3:09:42.200 PM com.apple.backupd[532]: Copied 1201 items (51.5 MB) from volume Macintosh HD. Linked 2894.
    6/11/14 3:10:14.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:10:17.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:10:30.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:10:30.072 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Home Videos/2013 Trip To Kate and Jason - Large 1.m4v to (null)
    6/11/14 3:10:44.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:10:57.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:10:57.327 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Home Videos/2013 Trip To Kate and Jason - Large.m4v to (null)
    6/11/14 3:11:09.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:11:22.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:11:22.394 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Home Videos/IMG_0378.m4v to (null)
    6/11/14 3:11:57.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:12:09.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:12:09.872 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Home Videos/IMG_0398.m4v to (null)
    6/11/14 3:12:44.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:12:46.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:13:05.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:13:05.959 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/AAA 2.4.1.ipa to (null)
    6/11/14 3:13:23.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:13:46.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:13:51.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:13:51.325 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Air Sharing 3.4.3.ipa to (null)
    6/11/14 3:14:18.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:14:21.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:14:48.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:14:51.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:14:51.289 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Angie's List 3.0.2.ipa to (null)
    6/11/14 3:15:16.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:15:29.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:15:34.517 PM secd[422]:  SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
    6/11/14 3:15:34.517 PM secd[267]:  SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
    6/11/14 3:15:34.517 PM secd[267]:  securityd_xpc_dictionary_handler EscrowSecurityAl[581] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
    6/11/14 3:15:34.517 PM secd[422]:  securityd_xpc_dictionary_handler EscrowSecurityAl[580] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
    6/11/14 3:15:51.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:15:51.643 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/AP Mobile 6.2.1.ipa to (null)
    6/11/14 3:15:54.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:16:07.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:16:19.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:16:19.908 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Apple Store 120269.ipa to (null)
    6/11/14 3:16:35.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:16:50.710 PM com.apple.backupd-helper[533]: Not starting scheduled Time Machine backup: Backup already running
    6/11/14 3:16:53.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:17:00.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:17:00.552 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Archetype 1.6.2.ipa to (null)
    6/11/14 3:17:10.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:17:23.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:17:35.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:17:49.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:18:01.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:18:14.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:18:28.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:18:40.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:19:03.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:19:06.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:19:18.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:19:41.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:19:43.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:19:56.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:20:11.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:20:23.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:20:36.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:20:48.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:21:01.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:21:13.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:21:26.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:21:38.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:21:51.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:22:03.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:22:16.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:22:28.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:22:41.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:22:53.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:23:06.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:23:19.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:23:31.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:23:57.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:24:09.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:24:22.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:24:38.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:24:50.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:25:03.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:25:15.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:25:35.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:25:47.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:25:47.887 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Bloomberg 3.0.ipa to (null)
    6/11/14 3:26:01.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:26:13.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:26:13.942 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Calculator 3.4.ipa to (null)
    6/11/14 3:26:26.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:26:26.509 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Camera Zoom 3.1.ipa to (null)
    6/11/14 3:26:39.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:26:52.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:26:52.108 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Cards 2.0.1.ipa to (null)
    6/11/14 3:27:14.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:27:17.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:27:29.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:27:29.606 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Casino 2.5.ipa to (null)
    6/11/14 3:27:47.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:28:00.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:28:00.327 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Clear Day 2.6.ipa to (null)
    6/11/14 3:28:14.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:28:26.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:28:39.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:28:56.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:29:09.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:29:21.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:29:34.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:29:47.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:29:59.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:30:12.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:30:24.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:30:37.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:30:49.085 PM xpcproxy[629]: assertion failed: 13D65: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
    6/11/14 3:30:49.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:30:50.194 PM syncdefaultsd[628]: Fixing push token
    6/11/14 3:30:52.507 PM xpcproxy[632]: assertion failed: 13D65: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
    6/11/14 3:31:02.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:31:14.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:31:27.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:31:39.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:31:52.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:32:05.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:32:17.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:32:30.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:32:42.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:32:55.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:33:07.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:33:30.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:33:32.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:33:55.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:33:58.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:34:21.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:34:23.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:34:46.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:34:49.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:35:02.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:35:18.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:35:30.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:35:30.676 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Collection HD 1.7.ipa to (null)
    6/11/14 3:36:14.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:36:17.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:36:29.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:36:29.651 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/eCardExpress 2.1.ipa to (null)
    6/11/14 3:36:52.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:37:14.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:37:17.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:37:30.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:37:52.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:37:55.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:38:07.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:38:30.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:38:32.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:38:45.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:39:08.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:39:10.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:39:23.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:39:46.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:39:48.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:40:01.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:40:23.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:40:26.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:40:38.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:41:01.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:41:04.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:41:16.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:41:39.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:41:41.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:41:54.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:42:17.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:42:19.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:42:32.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:42:54.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:42:57.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:43:09.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:43:32.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:43:34.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:43:47.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:44:10.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:44:12.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:44:25.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:44:48.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:44:50.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:45:03.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:45:25.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:45:28.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:45:40.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:45:55.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:46:07.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:46:20.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:46:32.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:46:45.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:46:58.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:47:10.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:47:23.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:47:35.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:47:48.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:48:00.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:48:13.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:48:26.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:48:38.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:48:51.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:49:03.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:49:16.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:49:21.393 PM WindowServer[128]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04280300 device: 0x7f8ef9d04e00  isBackBuffered: 1 numComp: 3 numDisp: 3
    6/11/14 3:49:21.731 PM launchservicesd[52]: Application App:"System Preferences" asn:0x0-44044 pid:509 refs=7 @ 0x7fb5b9443730 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x45045 pid=513 "com.apple.prefs.backup.remoteservice"")), so denying. : LASSession.cp #1481 SetFrontApplication() q=LSSession 100019/0x186b3 queue
    6/11/14 3:49:21.731 PM WindowServer[128]: [cps/setfront] Failed setting the front application to System Preferences, psn 0x0-0x44044, securitySessionID=0x186b3, err=-13066
    6/11/14 3:49:21.733 PM WindowServer[128]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x7f8ef9e94e00(2001)
    6/11/14 3:49:21.795 PM WindowServer[128]: device_generate_lock_screen_screenshot: authw 0x0(0), shield 0x7f8ef9e94e00(2001)
    6/11/14 3:49:29.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:50:48.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:50:48.546 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/GarageBand 1.1.ipa to (null)
    6/11/14 3:51:01.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:51:13.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:51:26.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:51:38.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:51:51.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:52:03.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:52:16.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:52:29.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:52:41.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:52:55.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:53:07.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:53:07.747 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Glympse 2.22.444.ipa to (null)
    6/11/14 3:53:20.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:53:32.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:53:32.869 PM com.apple.backupd[532]: Stopping backup.
    6/11/14 3:53:32.869 PM com.apple.backupd[532]: Error: (-36) SrcErr:YES Copying /Volumes/Media/itunes Media/Mobile Applications/Golf Channel 3.7.2.ipa to (null)
    6/11/14 3:53:33.357 PM com.apple.backupd[532]: Copied 127 items (2.24 GB) from volume Media. Linked 0.
    6/11/14 3:53:33.376 PM com.apple.backupd[532]: Copy stage failed with error:11
    6/11/14 3:53:34.607 PM com.apple.backupd[532]: Backup failed with error 11: 11
    6/11/14 3:55:53.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:56:05.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:56:18.000 PM kernel[0]: disk1s2: I/O error.
    6/11/14 3:56:33.000 PM kernel[0]: disk1s2: I/O error.

  • How do i stop my itunes from changing the location of my itunes media.  i have it saved on a external HD and it keeps changing back to my local drive with out being told

    how do i stop my itunes from changing the location of my itunes media.  i have it saved on a external HD and it keeps changing back to my local drive with out being told

    No, an external drive will not always be mounted. If the drive goes to sleep, it can unmount, or it may unmount for other reasons. As Chris said, confim that the drive is mounted and active before launching iTunes.
    Regards.

  • IMovie audio issues. Fine in timeline, but when rendering to iTunes or Media Browser, audio from certain portions of movie files are heard in places where it shouldn't be !

    iMovie 11  audio issues. Fine in timeline, but when rendering to iTunes or Media Browser, audio from certain portions of movie files are heard in places where it shouldn't be !
    I have created a project where I have a montage of photos and video clips edited together with music under. Some audio portions of the video files are being muted in some areas and those portions are being heard in another part of the project. This is not for all video clips only certain ones.
    The project plays fine in the timeline, but when I render the project thru iTunes or Media Browser, this is when the project goes corrupt.
    I tried detaching the Audio from the video clips and this somewhat worked, but the original problem still exists with certain audio still being heard where it's not supposed to be.

    I have a fix - or rather, a workaround.
    WARNING: It is lengthy, but still far better than starting a new project from scratch.
    I had this same issue and none of my transitions/clips were at custom speeds, nor did I have anything else weird going on. Unfortunately there is nothing you can do within iMovie to fix this, at least there wasn't for me. iMovie is BY FAR the buggiest software I have ever used and if you haven't already spent hours slaving away on a project, you are so much better off using just about anything else to edit your video.
    ...But let's assume you have already spent many hours working on your project and you don't want to start all over. Well then, you have at least one option.
    It's a pain in the neck, but it's infinitely better than restarting your project from scratch.
    This will require:
    A software called Soundflower (which is free) and some kind of audio editing software (I use Logic, but really any should work).
    1.) You're going to need to export your video with the messed up audio. Typically if you're audio is messing up, you're video is at least usually working just fine (at least it always does for me).
    2.) You're going to need to open that video in your audio software and import only the audio. If your software doesn't give you this option, then you're going to need to record the audio from your video using the audio software and Soundflower. You can find tutorials on how to do this, but it's honestly pretty straightforward once you start playing around with you Mac's audio I/O settings. Remember to have your computer's volume all the way up when doing this.
    3.) Watch/listen to your video and make notes of where the audio errors occur. I HIGHLY RECOMMEND writing down times too,  as they will be extremely helpful later.
    4.) Now were going to rip some working audio from the iMovie project itself. Go back into your iMovie project and only play back audio while in the edit window for this step. Do NOT play your project back in full screen.
    This part is key: if you try to play back your project from the beginning the audio will usually still mess up. So, what you're gonna have to do is go back on your edit window timeline right before these errors occur and play that specific clip back while recording this working audio with Soundflower and your audio software. Essentially we're only recording the parts of the audio where these errors occur, so try to do this in order if you can. Try to leave several seconds of audio in before the error - that way we can use it as reference when we construct our new audio track.
    5.) Now in your audio software you should have your original error-filled audio track and the new clips that we just captured. This part can be painstaking if you're not familiar with audio editing softwares, but as you'll learn, it's really not that hard.
    You're going to look at your original audio track and compare it to your new working audio clips. You should be able to notice where those new clips are supposed to go by looking at the identical (or close to identical) waveform shapes in your original audio track. The two should correspond with one another. If you don't understand what I mean right now, you will when you start playing around with the audio. This is why marking times is very important.
    Take your new clips and split them up if you haven't already, that way you can drag them around and edit them separately from one another. Essentially your going to line these new clips up with original and then replace the original parts with new ones.
    We need to get this as precise as possible, so start off by getting them as close as you can with your naked eye, and then use a zoom tool to zoom in as much as possible so that you can get them lined up PERFECTLY, or at least extremely close. In some softwares you can just drag these new clips on top of the old track, but most of the time you will need to actually cut out the old piece and replace it with the new one. In doing this, zoom in and make sure that you are NOT cutting out a bigger space than your new clip will fill - otherwise you will have small gaps in your audio.
    VERY IMPORTANT: Also make sure that this new audio track starts at the EXACT SAME time as your original - otherwise your new audio will be out of sync.
    I know this part can really suck if you're not used to audio editing, but at this point, there is little other choice.
    6.) Once you are done with this, export your newly pieced together audio track.
    7.) Now open iMovie and create a NEW project. Re-import the video that you exported earlier that has the messed up audio. This might take a while, so just be patient.
    8.) Then right click the clip and select "Detach Audio". This will do just that - allowing you to edit the audio separately from the video. Now delete this audio.
    9.) Now, import the new, perfect audio track that we just made and make sure that it starts at the start of the project. Make sure it's in sync and that everything works.
    Now just export your new video with the working audio and you should be done. Since we have given iMovie the audio with no editing actually being done in iMovie, it does not have to generate its own audio now and you should have absolutely no errors now - unless there is some that you forgot to take out earlier.
    YOU'RE FINALLY DONE!!!
    I know this entire process *****, but if you're that far into your project, there is little else that you can do. Now you've learned your lesson:
    DON'T USE IMOVIE EVER AGAIN.
    I hope this helped!

  • I can't upload or import videos from my iphoto library, into final cut pro x.  When i click, IMPORT MEDIA in FCP, It lists iPhoto Library as GRAY, and will not let me access it.  I need the videos out of there.  I have tried every way I can think of.

    Like the title says...
    I can't upload or import videos from my iphoto library, into final cut pro x.  When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it.  I need the videos out of there.  I have tried every way I can think of.
    I have also tried from the iphoto side, to export the videos or share them to final cut.  I have had no luck.
    I have tried to drag and drop indidual video clips from iphoto to fcp, and the programs simply do not respond to each other
    I can see in the OLDER version of final cut pro x, where it has IMPORT FILES as an option, it was possible.  I see this on forums and youtube videos of the older versions.
    However, the newer version that i have, does not have IMPORT 'FILES' as an option, it is simply all lumped together as IMPORT 'MEDIA'
    Thank You for the Help

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • Wireless file/media transfer to/from Xperia Z3 to/from PC/Mac

    What is the easiest way you would recommend for file/media transfer to/from Xperia Z3 to/from PC/Mac wirelessly?

    Perhaps bluetooth 
    http://support.sonymobile.com/global-en/xperiaz3/userguide/Bluetooth-wireless-technology/
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • What is a media kit - upgrading from Tiger to Leopard?

    I appreciate that I am a bit behind the power curve but I have only just realised that I have to upgrade to Leopard if I am to extend the life of my trusty iBook G4! The problem is the only source of Leopard seems to be eBay - where reliable advice is conspicuously absent. Apart from expressing surprise that I cannot buy the upgrade disc from Apple, I would appreciate some advice from this forum.
    What exactly are media kits? They are advertised new at about 16% of the going rate for a used installation disc on eBay. There is a suggestion that, if a licence number is available from a previous installation, they can be used to upgrade but I am a little sceptical.
    Any advice gratefully received and apologies if this has been covered earlier - couldn't find it in a search.
    Dave

    The "media kit' is a physical disk, but that's all.
    In order to use it, you'd need a valid license, but the media kit doesn't include any license.
    Media Kits are designed to be used by large installations - say you had 100 systems in your corporate network that you want to upgrade. You don't really need (or want) 100 Install DVDs so you might purchase a site license for 100 copies plus a media kit or two.
    The site license is really the legal right to install and run a certain number of copies of the OS within an organization. You'd still need at least one copy of the install DVD, though, so that's where the Media Kit comes in - the physical package that's designed to be used in conjunction with a separate license agreement. It works out a lot cheaper to buy one Media Kit plus a 100-user license than it does to buy 100 single-user licenses.
    The license agreement could also be a single-user copy of Mac OS X - for example, you lost or broke your install DVD and want a replacement. A Media Kit would also be valid there.
    It isn't valid, though, as an upgrade from an earlier OS version.

  • Adobe Premiere Elements 13 stops working trying to add media via videos from camera

    When I try to add media selecting videos from camera or flip, Adobe Premiere Elements 13 stops working and closes. What might be the problem?

    elizabethmeow
    On what computer operating system is your Premiere Elements 13 running? Have you had the opportunity to update 13 to 13.1 using an opened projects Help Menu/Update?
    What are the full properties of your source media and how are you importing them that you are trying to import into the project? A quick way to get that information, if you do not know that information, is for you to post the brand/model/settings for the camera that recorded the video.
    Do you have the latest version of QuickTime installed on your computer with Premiere Element 13, and are you running the program as Administrator?
    Lots of additional questions, but the answers to the above may give us the answer that you need to resolve you issue.
    Thank you.
    ATR

  • HT1766 I have an I pad Mini. Since i down loaded the new update ISO 7, my I Pad is not running certain media files either from Chrome or Safari browser. I called technical support but they failed to provide any help stating the media files may not be comp

    I have an I pad Mini. Since i down loaded the new update ISO 7, my I Pad is not running certain media files either from Chrome or Safari browser. I called technical support but they failed to provide any help stating the media files may not be compctable with new soft ware. I do bnot agree with their finding because i have I phone with ISO 7 updated soft ware and same files run on my I phone but not on I Pad. This was working fine before updating new software. This device is useless for me if i can not watch the program that i bought this for. I want device to replaced or taken back by the company. Thank you

    Here are the iPad Mini specifications:
    iPad mini - Technical SpecificationsNov 1, 2012
    The specifications explain exactly what types of files are supported under "TV and Video".

  • Media/Stock name from an XMPie uStore product not coming over

    Hi, I'm having some issues with a print file coming over from uStore to FreeFlow Core workflow to print to a 6180 Docuprint. The job is set to have page 1-2 on thick stock and 3-6 on thin stock all 2 sided. When it arrives at the 6180 it is recognizing sides printed and that there are 2 blocks of exception pages (1-2 and 3-6) unfortunately the stock for both show up as unspecified. I've made sure that the printer's stock library is matching the descriptive name in the JDF node setup in uStore. Nodes in uStore@DescriptiveName="Media Type Thick"@DescriptiveName="Media Type Thin" Names in the printer's stock library:Media Type ThickMedia Type Thin Should the uStore JDF node set have more entries so the the 6180 can properly ID the stock? Or is there a specific naming convention I should be using? Like say no spaces or capital letters?

    By default, uStore includes JDF nodes for several paper types, folding and colour settings. These nodes are available when you set up JDF requirements in the Product Properties page. If your job includes additional requirements, such as printing on named stock, you need to create additional JDF node sets. To ensure that your product is printed according to the JDF specifications, make sure that you follow these steps:Create the required property in the Product Properties page.Create the new JDF Node Set. The JDF Node Set that you create is added to the list of options available when you set up JDF requirements in the Product Properties page. See To add new JDF node sets below.Create the new JDF Node. See Setting Up JDF Nodes below.Assign the required JDF Node set to the property options in the Product Properties pageTo add new JDF node sets:Select Presets>System Setup>JDF Node Set.On the JDF Node Set page, click Add New.In the Display Name box, enter a name for the node set. For example, if your product needs printing on SRFRed Stock, enter PrintOnSRFRedStock.Click Save.The Node Set is added to the list and is available in the Product Properties page when you set up customer input controls of the following types: Drop-down lists, radio buttons, and gallery/grid view lists. To make sure that uStore sends the correct information when it creates the JDF file, you need to set up the JDF Node with the required XML code.To add a new JDF node:Select Presets>System Setup>JDF Node.On the JDF Node page, click Add New.In the JDF Node Set ID list, select the JDF Node Set that you want to set up. For example, if you create a JDF Node Set for printing on SRFRed Stock, select the PrintOnSRFRedStock node set.In the Node XML box, enter the XML code for the new JDF node. For example, enter @ProductID="SRFRED".In the Node Target Xpath box, enter the location of node in the JDF file. For example, the Media attribute should be located at //ns:ResourcePool/ns:Media.Click Save.The new node set is added to the list. Every time a product includes this property option, the XML code will be added to the JDF file. For your reference, uStore saves all JDF files at \\[ServerName]\App\JDF. (Thanks to Steve F and Per F for validating this information.)

  • When I try to backup my files from photoshop elements 12 the "calculating total media size" box will only get as far as 46% and then freeze, how can I make it go to 100%

    When I try to backup my files from photoshop elements 12 the "calculating total media size" box will only get as far as 46% and then freeze, how can I make it go to 100%

    hi barbara
    thank you for your response, i appreciate it.  there's definitely nothing wrong with the mouse or trackpad, both work fine in every other application....i can also easily change size dimensions in other programs on my computer so it doesn't seem to be that either.  it seems like there is something weird going on in the way that pse and my mac are interacting with each other, just wish i knew what it was.    thank you again, wish me luck!

  • How can i download movies from a website that use the windows media extention it specifically sends the media through the windows media extension

    '''there is a website i visit frequently and i have tried all the downloader extensions how do i download the movie from the sight if it uses windows media extension'''

    Thanks for the excellent advice, all! I started with BitPim, and have hit a bit of a deadend with the application not being able to detect the phone - I can manually set the port location to the phone (and it shows up as an LG device), but then get a "false" and no connection. So I suspect that's something on the phone end blocking access from a computer via USB... I'll dig around on that a bit.
    Thanks, also, for the suggestion to buy a BlueTooth adapter - that's my next step in this... although after reading the link/review about Verizon's attitude toward open file transfer, I may be severing my ties with them. I've been happy with the phone service, but this is really annoying.
    This is what happens when you assume that Mac people exist in the rest of the corporate sphere..! To think that I would assume that a phone/camera with a USB cable would actually be capable of connecting to a computer and transferring files!
    Thanks, again!
    Tom

Maybe you are looking for

  • How can I stop sounds in this scenario

    Hello, I need help. I need to load in an external .swf file into my new movie and stop the sound/music that is playing from the external swf file. I need the sound/music to stop immediately on frame one. I don't have the fla to the external swf file

  • OfficeJet Pro 8600 plus will not install , msg Call to DriverPackageInstall returns error 5

    I get message "Call to Driver Package Install returned error 5 for package -c\Program Files\HP\HP OfficeJet Pro 8600\Drivers Store\Pipeline\hpup\03.inf-Call to Driver Package Install must be a member of th eadministrator group to install a driver pac

  • T400 stuck key issue

    I bought my T400 2764-CTO in last December, and started using it on mini dock without any problem. Until recently, it starts to show stuck key issue randomly (not always failure) both at boot up or under Windows Vista. ERROR 0210 Stuck Key FF Press <

  • Joining with sub query not working

    Hi I am new with these complex queries. I am trying to join a sub query to a query as below; SELECT Events1.InvoiceBatch AS BatchNo, Events1.InvoiceBatchDate AS BatchDate, tblClients.Company, tblClients.ID AS ClientID, COUNT(Events1.ID) AS Invoices,

  • Java (JRE) won't install??

    While visiting a site, the java applet, on the site would not run. Further browing discoverd that I needed an updated version of the JRE. Having had problems with Java, in the past, I removed my old version before installing the new version. MSIEXEC.