Communication between MDS C9134 and C9222i

Dear Support,
need your help to fix my setting.
I have bought now the good 10GBFC Module for connexion between MDS C9134 and C9222i. the trunking is OK between the 2 switches.
But we have Vsan with zone on each MDS but they cannot communicate.
Please find in attach my setting.
Waiting for your feedback urgently
Best Regards

Hello Omer,
Yes, you got it right, LANs are very different from SANs. VLAN concept is similar to VSAN, but there are a few differences. First of all, there is no concept of LAN's VTP in Cisco's SAN-OS (NX-OS). You need to manually create VSANs on all switches. Secondly, "inter VSAN routing (IVR)" is not automatic. You have to configure IVR vsan-topology and IVR zones+zoneset. But in your case, maybe you could just put all devices into the same VSAN and simply control communication between devices using zones. Yes, you could use only VSAN 1 to solve it. Place everything into VSAN 1 and configure zones in VSAN 1 on one of the switches. Place zones into zoneset, activate it, and active zoneset will automatically propagate in VSAN 1 to the other switch.
Let me know if you have any more questions.
Regards,
Roman

Similar Messages

Communication between HP eprint and Google Cloud Print

Hi,
the communication between HP eprint and Google Cloud Print seems to be broken. At least for me.
The documents do get printed when I print vio Chrome browser or Cloud Print dashboard -- but the status in cloud print remains as "submitted". It seems like somehow the HP eprint status doen't get reported back to cloud print. In HP eprintcenter the log says "printed".
Well, I wonder who will take care of this problem ... (Hope it will not result in fingerpointing only ...)
Thanks for your support!
Best,
George
This question was solved.
View Solution.

Are you able to log back in later and the status at Google Cloud print update to reflect the true outcome of the print job? Or does it just remain as "submitted". Otherwise, if it is printing and showing in the log at ePrint Center (EPC) as printed, the issue would not be on the ePrint side but on Google's
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Communication between a driver and application.

Communication between a driver and application.
I am writing a driver for a PCI card. I have found very good examples of how the driver should be build.
Where do I find the information about how the user mode application should be talking the driver.
So If you have any idea that will help me, please let me know.

Hi,Sir
This for your reference.
It will create pci adapter device node at /devices .
You can use AP function call ioctl to Communicate with your device driver.
static int
xxattach(dev_info_t *dip, ddi_attach_cmd_t cmd)
int instance = ddi_get_instance(dip);
switch (cmd) {
case DDI_ATTACH:
allocate a state structure and initialize it.
map the device�s registers.
add the device driver�s interrupt handler(s).
initialize any mutexes and condition variables.
create power manageable components.
* Create the device�s minor node. Note that the node_type
* argument is set to DDI_NT_TAPE.
if (ddi_create_minor_node(dip, "minor_name", S_IFCHR,
instance, DDI_NT_TAPE, 0) == DDI_FAILURE) {
free resources allocated so far.
/* Remove any previously allocated minor nodes */
ddi_remove_minor_node(dip, NULL);
return (DDI_FAILURE);
* Create driver properties like "Size." Use "Size"
* instead of "size" to ensure the property works
* for large bytecounts.
xsp->Size = size of device in bytes;
maj_number = ddi_driver_major(dip);
if (ddi_prop_update_int64(makedevice(maj_number, instance),
dip, "Size", xsp->Size) != DDI_PROP_SUCCESS) {
cmn_err(CE_CONT, "%s: cannot create Size property\n",
ddi_get_name(dip));
free resources allocated so far
return (DDI_FAILURE);

Communication between the computer and the disc drive failed

The disc can’t be burned because because communication between the computer and the disc drive failed (error code 0x80020022). This computer has been out of the box for less than a month and this has been a growing problem.

My problem was FIXED at the apple store..... there was something wrong in the system preferences and the genius deleted something that recreated it's self. Surely enough we we're able to burn a 600 mb dmg of nothing onto a few test disks. For anyone having this issue...it's NOT The media, it's some configuration issue within the computer's preferences. I'm telling you all to take your machine to the nearest apple store and have them fix it, if your machine is still under warranty the fix is free. There was no hardware issue, so the optical drive was not replaced.

Communication between non SAP and SAP

HI,
do you have some information about communication between non SAP and ERP (WebAs) SAP System ?
I would like to receive an xml file or xml IDoc from a Java Plattform (non SAP) into our SAP ERP System as an own defined IDoc.
remember: we don´t have a converter like XI.
What about using a proxy (do you have some information/blog how to use that) ?
What about using a webservice (do you have some information/blog how to use that) ?
What about storing the xml on the application server (do you have some information/blog how to use that) ?
How to transform xml to IDoc ?
other methods ?
Thanks for your help.
Gordon

Here is a link to connecting MS SQL Server with SAP using Open Hub connection.
http://msdn.microsoft.com/en-us/library/dd299430(SQL.100).aspx
This might give you some insight into connecting with Non SAP Systems.
I have used the information from this link to export data from SAP to MS SQL Server.
Good Luck.
MP.

Error 2032 in communication between Flex Client and WCF

Hi All,
I'm trying to establish communication between Flex Client
and WCF service.
WCF service accepts gZip compressed data and returns gZip
compressed results.
So I used Flex ByteArray.compress() and
ByteArray.uncompress() for this purpose. However, it throws error
2032.
The gZip compression/decompression uses MemoryStream class in
C#. Based on my previous experience, memory stream communication
between Flex and C# gives erro 2032.
Is there a work around for this?
Thanks,
Vishal

I read some thread in the forum, and found somebody had the similar problem with me. Just want to know how to settle this problem.
In the client/server program. Client is a JAVA program and Server a
VC++ program. The connection works, and the problem appears after some time. The Client sends a lots of requests to Serverm, the server seems receive nothing. But at the same time, the server is able to send messages to Client. The Client also can get the messages and handle them. Don't understand why there this problem and why it appears when it wants.
The client is a Win2k platorm with JDK1.3.1 and the server is also a Win2K platform with VC++ 6.0.
In the Client, using:
inputFromServer = new BufferedReader(new InputStreamReader(socket.getInputStream()));
outputToServer = new PrintWriter(new BufferedWriter(new OutputStreamWriter(socket.getOutputStream())),true);
Hope can get your help.

I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

Reset the SMC, as per > Resetting the System Management Controller (SMC)
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
Then zap the PRAM/NVRAM as per > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.
Then retry the Disc Drive.

I have problems in communication between my notebook and Epson printer. It goes offline everytime I unplug it from the notebook and there is no way how to switch it on. Although the printer is recognized and scanning is not a problem. Any solution?

I have problems in communication between my notebook and Epson printer. It goes offline everytime I unplug it from the notebook and there is no way how to switch it on. Although the printer is recognized and scanning is not a problem. Any solution?

this is exactly the kind of response i expected, almost begged support to please not do this to me and yet there it is another meaningless, non helpful, standard template response to restart my apple tv.
this does NOT work which is why i am contacting you. i have tried all suggestions about unplugging and restarting and nothing works.
i live in an apartment and logon to the provided wifi wireless. so i do not have access to a router. however, management says they have talked with their provider and have been assured that the required ports are available.
remember all the jokes about how bad windows was because the solution was always to re boot. funny huh? how is apple any different.
i have been to the local apple care store and they are clueless, too.
should we just end it here and you admit that i will not be getting any support from apple on this one? i got the ipad because my kids were such big fans. it is difficult for me to share their enthusiasm.
at this point i am just curious about how you say you cannot support your own product so i can complete my file on this contact.
thanks...sorry it was you who got this problem..

Communication between Best Buy and Apple

Where is the communication between these two companies? It's frustrating to have NO CLUE if a phone will come in a day or in 5 weeks. Who at Apple is deciding what they end to what stores? Obviously, Best Buy has to pay for the phones. There has to be some sort of communication.
Would it really be that hard for someone high up in Best Buy to communicate with Apple? Maybe a list from each store of their orders and what they are waiting on. Give that to Apple. Apple can give some sort of answer. Exepect this much in this time frame... expect this much later. I mean, something. Instead of leaving everyone in the dark, completely.
Someone at Best Buy corporate has to have SOME clue how Apple is shipping and to what stores. To say no one has no clue at all, is nuts. And if it's true... Best Buy needs to get a clue. DO SOME WORK FOR YOUR CUSTOMERS. At least get some truth, so if we need to go elsewhere, we can. It would be better for both sides.

Apparently since they come on UPS, they don't know when the shipments are coming in or how much. Which I think is bull.
If that's the case, what I want to know is HOW do they know they received the amount they were expecting? If they don't know how much they're getting or when they're getting a shipment, then what's stopping the delivery man from stealing a box, and they wouldn't know any better? Maybe the higher up manager's know, and they aren't allowed to reveal that info, but there has to be a checks system in there somewhere verifying the stock received.

Communication between Lab view and Controller via USB

USB communication between C8051F320 and Lab View. I try doing methods given in the NI site(http://zone.ni.com/devzone/cda/tut/p/id/4478) and atlast, it gives me error −1073807302 so if any one can answer my question please do post me the details concerned to it.

My devices show up as NI-VISA USB but I'm not sure if that makes a difference and I'm not using USB RAW either. One thing that you can run is a VISA Property node like below and see what it reports. Also, what version of VISA are you using? If you are not using 4.0, you can download it from http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C0E91?opendocument&node=1....
Message Edited by Dennis Knutson on 01-31-2007 07:29 AM
Attachments:
USB RAW Property.PNG ‏3 KB

IPhone SDK : Communication between iPhone client and a remote server

Hi,
This is w.r.t iPhone Cocoa Touch native application.
i need to populate my application 's data from a remote application server ( which in turn connects to the database) . I require some tips in the communication between client sitting on the iPhone and the remote application server. I am planning to proceed in XML transaction way.
I referred the SeismicXML sample application provided by Apple. In this sample,client reads the physically existing xml file from @"http://earthquake.usgs.gov/eqcenter/catalogs/eqs7day-M2.5.xml"; and the client parses the xml file and display the content on the table view.
i have following 2 queries ,
1. I do not want to read from a physically present file,i want the data to be transferred on the go.
Means, request should be sent from the client to a application server and the server process returns the data in form of xml file ( but its not creating any physical xml file) .
Basically i am looking for request - response concept.
2. Can we call a java process(which returns xml data) running on a remote server from the cocoa touch client.? If not java process,what would be other best way...
i am going through the Apple provided frameworks. Do any of the iPhone SDK frameworks support this request? If some one has any idea on the above mentioned queries, pls help me.
any pointers will also be helpful.
It might be too early to talk about these,but i have to take some business decision related on this.
thanks in advance.

You already know how to send a string via HTTP Post? And you know how to make XML into a string? Put the two together.

Communication between SCM ICH and ECC

Hi every one,
We are trying to implement SCM ICHin our landscape. Can any one explain me, what all the stuff needed to configurations communication between SCM ICH to ECC. How to do that also? As per knowledge I head PI(Process Integration) is involved in the communication, but I do not know what all the configurations I need to do for that. Please let what all is needed for that. Can anyone provide me rlated documents.
Regards
Jack

Hi
The Connectivity settings are fully explained for cross systems in the Best Business Practice documents from SAP:
[BBP Connectivity Guide|http://help.sap.com/bp_scmv250/BBLibrary/Documentation/B02_BB_ConfigGuide_EN_DE.doc]
and the Replication Best Practice document:
[BBP Replication|http://help.sap.com/bp_scmv250/BBLibrary/Documentation/B05_BB_ConfigGuide_EN_DE.doc]
Other ICH configuration can be found in the Supplier Collaboration Document:
[BBP Supplier Collaboration|http://help.sap.com/bp_scmv250/BBLibrary/Documentation/S34_BB_ConfigGuide_EN_DE.doc]
There really is a lot of good documentation in SAP's own systems without having to email stuff around ;o)
Regards
Ian

Ports required for communication between Web servers and service applications (the default is HTTP)

We're using SharePoint 2010, I'm the system admin for a SharePoint farm. We enabled SharePoint Search by adding a Search Service APplication. One of the crawl report timer job is failing every 5 minte with the error "Cannot connect to remote server".
After digging around, we found that the server running the timer job tries to connect to the SearchAdmin.svc on the index server, over HTTPS / port 32844 However, communication over SSL via a non default port is blocked by our firewall.
According to this article: https://technet.microsoft.com/en-us/library/cc262849.aspx the default is HTTP for communication
between web servers. How is it possible that it's trying to connect over SSL?

Hi,
Quoted from
https://technet.microsoft.com/en-us/library/cc262849.aspx#ServiceApp :
You can change the protocol and port binding for each service application. On the Service Applications page in Central Administration, select the service application, and then click
Publish.
Here is an article for configuring Windows firewall port rules for SharePoint using PowerShell in case you need:
http://www.xylos.com/default.aspx?id=1050
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

10.1.3EA: Purpose of Communication between System Boundary and UC

Hello,
What is the purpose of displaying communication between a System Boundary and a Use Case? On the diagram, you can even show communication between a UC included within the system boundary.
Just trying to figure out how that would be used and why...
The tooltip on the Communication elements has:
"Defines where an actor communicates with a use case"
Thanks.

Hi,
This is probably a slightly controversial ability; but after much research we have found this is to be valid UML. The reason for this support is that some objects, depending on the context, might well need to be represented on the diagram as either a actor or a system boundary.
Take for example a computer system called "Accounting System". On some high level diagram you might want to represent this as a computer that plays a role in a usecase. At a lower level you might want display this element as a System Boundary that contains sub usecases.
Does this make sense?
Gerard

Communication between ADF Application and third party tool

Hi,
JDev 11.1.1.5.0
I am a new bee to SOA Suite :). I am looking for a suggestion on below usecase.
We have Arbortext Editor which is a dynamic publishing tool for creating technical publication. We are planning to develop a UI tool
using ADF/JDev. As POC, we are able to invoke our ADF application from Arbortext Editor as shown below.
AccessURL accessURL = new AccessURL();
String myURL = "http://127.0.0.1:7101/IFS_Object_Selector_1-
ViewController-context-root/faces/object_selector_main?";
java.awt.Desktop myNewBrowserDesktop = java.awt.Desktop.getDesktop();
java.net.URI myNewLocation = new java.net.URI( myURL);
myNewBrowserDesktop.browse( myNewLocation );
So, Arbortext is having it's own JVM and can have standalone java program with main method. If we can able to provide communication between our ADF application and Arbortext JVM, that can solve our issue.
We need to pass some information back to Arbortext editor from ADF application on some action (Button click).
Can you suggest any clue on this?
It would be really helpful, if you can provide some pointers for similar usecases.
Thanks,
Samba.

Hi Samba,
I'd suggest better raise it in he ADF forum.
However, this should be possible by calling the Arbortext functions on click of ADF form buttons. Or you may send the information to a placeholder (JMS, File, DB etc.) from where Arbortext can pick that information.
Regards,
Neeraj Sehgal

Communication between MDS C9134 and C9222i

Similar Messages

Maybe you are looking for